! Started logfile: /vlbi/uf001/uvm//J0751-3331_X_a_dfm.log on Sun Jan 13 21:04:01 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0751-3331_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0751-3331_X_a_uvm.fits ! AN table 1: 29 integrations on 21 of 21 possible baselines. ! AN table 2: 29 integrations on 36 of 36 possible baselines. ! AN table 3: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.993239 visibilities/baseline/integration-bin. ! Found source: J0751-3331 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35256 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0751-3331_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.008428Jy sigma=18.513387 ! Fit after self-cal, rms=0.900847Jy sigma=16.391844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6039 mas, bmaj=1.787 mas, bpa=-0.0229 degrees ! Estimated noise=0.497064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0758882 Jy ! Component: 100 - total flux cleaned = 0.0947761 Jy ! Total flux subtracted in 100 components = 0.0947761 Jy ! Clean residual min=-0.007010 max=0.012548 Jy/beam ! Clean residual mean=0.000014 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.0947761 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0947761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082403Jy sigma=1.391793 ! Fit after self-cal, rms=0.082178Jy sigma=1.389380 ! Inverting map ! Added new window around map position (-0.8, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115948 Jy ! Component: 100 - total flux cleaned = 0.0188874 Jy ! Total flux subtracted in 100 components = 0.0188874 Jy ! Clean residual min=-0.006445 max=0.009756 Jy/beam ! Clean residual mean=0.000010 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.113664 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.113664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079795Jy sigma=1.323843 ! Fit after self-cal, rms=0.079695Jy sigma=1.321076 ! Inverting map ! Added new window around map position (1.6, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950401 Jy ! Component: 100 - total flux cleaned = 0.0152628 Jy ! Total flux subtracted in 100 components = 0.0152628 Jy ! Clean residual min=-0.006132 max=0.008690 Jy/beam ! Clean residual mean=0.000008 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.128926 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.128926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078045Jy sigma=1.281955 ! Fit after self-cal, rms=0.077920Jy sigma=1.279626 ! Inverting map ! Added new window around map position (-1, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675665 Jy ! Component: 100 - total flux cleaned = 0.0102844 Jy ! Total flux subtracted in 100 components = 0.0102844 Jy ! Clean residual min=-0.005467 max=0.006229 Jy/beam ! Clean residual mean=0.000006 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.139211 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.139211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077203Jy sigma=1.262469 ! Fit after self-cal, rms=0.077162Jy sigma=1.261684 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8091 mas, bmaj=2.271 mas, bpa=0.3774 degrees ! Estimated noise=0.213702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717377 Jy ! Component: 100 - total flux cleaned = 0.0114297 Jy ! Component: 150 - total flux cleaned = 0.0144145 Jy ! Component: 200 - total flux cleaned = 0.015893 Jy ! Total flux subtracted in 200 components = 0.015893 Jy ! Clean residual min=-0.003762 max=0.004338 Jy/beam ! Clean residual mean=0.000010 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.155104 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.155104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076432Jy sigma=1.246122 ! Fit after self-cal, rms=0.076396Jy sigma=1.244941 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8091 x 2.271 at 0.3774 degrees (North through East) ! Clean map min=-0.0036023 max=0.090904 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.98 KP 0.98 LA 0.98 NL 1.01 ! OV 1.07 PT 1.01 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 1.05 KP 1.13 LA 0.97 ! MK 1.08 NL 1.29 OV 0.95 PT 0.97 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.96 HN 1.22 KP 0.95 ! LA 0.96 MK 0.98 NL 1.15 OV 0.86 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.05 KP 1.08 LA 0.96 NL 1.03 ! OV 0.97 PT 1.03 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.17 FD 1.05 KP 1.10 LA 1.00 ! MK 1.15 NL 1.37 OV 0.99 PT 1.01 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.93 HN 1.15 KP 0.92 ! LA 0.97 MK 0.97 NL 1.32 OV 0.87 ! PT 0.88 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 0.97 KP 1.06 LA 1.02 NL 1.08 ! OV 1.01 PT 0.96 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.04 KP 1.11 LA 1.00 ! MK 1.04 NL 1.30 OV 1.01 PT 1.03 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.90 HN 1.22 KP 0.93 ! LA 0.97 MK 1.05 NL 1.09 OV 0.85 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.26 KP 1.00 LA 0.98 NL 1.02 ! OV 1.01 PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 1.07 KP 1.14 LA 1.03 ! MK 1.08 NL 1.28 OV 0.95 PT 0.97 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.96 HN 1.26 KP 0.93 ! LA 0.93 MK 1.02 NL 1.21 OV 0.87 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! HN 1.05 KP 1.08 LA 0.99 NL 1.09 ! OV 0.98 PT 1.04 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.03 KP 1.11 LA 0.98 ! MK 1.08 NL 1.34 OV 0.94 PT 0.99 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.95 HN 1.17 KP 0.94 ! LA 0.97 MK 0.95 NL 1.21 OV 0.84 ! PT 0.89 SC 1.09 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! HN 0.97 KP 1.04 LA 1.01 NL 1.10 ! OV 1.04 PT 0.97 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 1.06 KP 1.05 LA 1.01 ! MK 1.17 NL 1.27 OV 0.96 PT 1.01 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.93 HN 1.30 KP 0.93 ! LA 0.95 MK 0.96 NL 1.34 OV 0.85 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! HN 1.03 KP 1.14 LA 1.00 NL 1.00 ! OV 0.97 PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 1.06 KP 1.14 LA 0.97 ! MK 1.14 NL 1.31 OV 0.97 PT 1.03 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.96 HN 1.14 KP 0.89 ! LA 0.98 MK 0.95 NL 1.20 OV 0.86 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! HN 1.03 KP 1.02 LA 0.99 NL 1.08 ! OV 0.99 PT 1.00 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.06 KP 1.10 LA 1.06 ! MK 1.06 NL 1.19 OV 0.94 PT 1.00 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.96 HN 1.21 KP 0.92 ! LA 0.94 MK 0.98 NL 1.23 OV 0.87 ! PT 0.88 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! HN 1.01 KP 1.03 LA 1.01 NL 1.09 ! OV 0.94 PT 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.09 KP 1.16 LA 0.99 ! MK 1.13 NL 1.34 OV 0.97 PT 0.98 ! SC 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 1.02 KP 0.91 ! LA 0.94 MK 1.05 NL 1.21 OV 0.86 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! HN 1.15 KP 1.03 LA 1.02 NL 1.07 ! OV 1.02 PT 0.97 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 1.02 KP 1.10 LA 1.04 ! MK 1.17 NL 1.22 OV 0.97 PT 1.01 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.95 HN 1.10 KP 0.91 ! LA 0.95 MK 0.95 NL 1.15 OV 0.88 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! HN 1.04 KP 1.00 LA 1.00 NL 1.05 ! OV 1.02 PT 0.97 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.17 FD 1.02 KP 1.12 LA 0.99 ! MK 1.11 NL 1.28 OV 0.97 PT 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.93 HN 0.96 KP 0.91 ! LA 1.00 MK 0.97 NL 1.23 OV 0.87 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! HN 1.01 KP 0.95 LA 0.97 NL 1.04 ! OV 1.03 PT 1.03 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.03 KP 0.99 LA 1.04 ! MK 1.14 NL 1.20 OV 0.94 PT 1.00 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.98 HN 1.11 KP 0.95 ! LA 0.94 MK 0.95 NL 1.22 OV 0.83 ! PT 0.85 SC 0.94 ! ! ! Fit before self-cal, rms=0.076396Jy sigma=1.244941 ! Fit after self-cal, rms=0.081226Jy sigma=1.211480 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8145 mas, bmaj=2.275 mas, bpa=0.7102 degrees ! Estimated noise=0.219403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116424 Jy ! Component: 100 - total flux cleaned = -0.00146426 Jy ! Component: 150 - total flux cleaned = -0.00162135 Jy ! Component: 200 - total flux cleaned = -0.00180706 Jy ! Total flux subtracted in 200 components = -0.00180706 Jy ! Clean residual min=-0.002047 max=0.001851 Jy/beam ! Clean residual mean=0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.153297 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.153297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081129Jy sigma=1.210091 ! Fit after self-cal, rms=0.081297Jy sigma=1.209622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081297Jy sigma=1.209622 ! Fit after self-cal, rms=0.082263Jy sigma=1.209452 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8159 mas, bmaj=2.277 mas, bpa=0.8134 degrees ! Estimated noise=0.219609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108013 Jy ! Component: 100 - total flux cleaned = -0.00126513 Jy ! Component: 150 - total flux cleaned = -0.00134711 Jy ! Component: 200 - total flux cleaned = -0.0014595 Jy ! Total flux subtracted in 200 components = -0.0014595 Jy ! Clean residual min=-0.001866 max=0.001732 Jy/beam ! Clean residual mean=0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.151837 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.151837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082203Jy sigma=1.208689 ! Fit after self-cal, rms=0.082218Jy sigma=1.208626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.84891e-05 Jy ! Component: 100 - total flux cleaned = -9.19334e-05 Jy ! Component: 150 - total flux cleaned = -0.000124395 Jy ! Component: 200 - total flux cleaned = -0.000184427 Jy ! Total flux subtracted in 200 components = -0.000184427 Jy ! Clean residual min=-0.001782 max=0.001689 Jy/beam ! Clean residual mean=0.000002 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.151653 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.151653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082185Jy sigma=1.208245 ! Fit after self-cal, rms=0.082183Jy sigma=1.208207 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082183Jy sigma=1.208207 ! Fit after self-cal, rms=0.083150Jy sigma=1.208065 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8169 mas, bmaj=2.279 mas, bpa=0.9018 degrees ! Estimated noise=0.219852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000982015 Jy ! Component: 100 - total flux cleaned = -0.00115327 Jy ! Component: 150 - total flux cleaned = -0.0012439 Jy ! Component: 200 - total flux cleaned = -0.00129971 Jy ! Total flux subtracted in 200 components = -0.00129971 Jy ! Clean residual min=-0.001663 max=0.001628 Jy/beam ! Clean residual mean=0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.150353 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 0.150353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083115Jy sigma=1.207650 ! Fit after self-cal, rms=0.083128Jy sigma=1.207617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, -30.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110729 Jy ! Component: 100 - total flux cleaned = 0.00120405 Jy ! Component: 150 - total flux cleaned = 0.00123174 Jy ! Component: 200 - total flux cleaned = 0.00125727 Jy ! Total flux subtracted in 200 components = 0.00125727 Jy ! Clean residual min=-0.001565 max=0.001502 Jy/beam ! Clean residual mean=0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.15161 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.15161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083085Jy sigma=1.207124 ! Fit after self-cal, rms=0.083082Jy sigma=1.207086 ! Inverting map ! Added new window around map position (-2, -12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517333 Jy ! Component: 100 - total flux cleaned = 0.000370405 Jy ! Component: 150 - total flux cleaned = 0.00028001 Jy ! Component: 200 - total flux cleaned = 0.000308441 Jy ! Total flux subtracted in 200 components = 0.000308441 Jy ! Clean residual min=-0.001556 max=0.001212 Jy/beam ! Clean residual mean=0.000002 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.151919 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 0.151919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083046Jy sigma=1.206453 ! Fit after self-cal, rms=0.083043Jy sigma=1.206422 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083043Jy sigma=1.206422 ! Fit after self-cal, rms=0.083680Jy sigma=1.206298 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.332 mas, bmaj=6.855 mas, bpa=2.492 degrees ! Estimated noise=0.273236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000382884 Jy ! Component: 100 - total flux cleaned = -0.000360011 Jy ! Component: 150 - total flux cleaned = -0.000339128 Jy ! Component: 200 - total flux cleaned = -0.000319808 Jy ! Total flux subtracted in 200 components = -0.000319808 Jy ! Clean residual min=-0.001650 max=0.001172 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.151599 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 132 components and 0.151599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083667Jy sigma=1.206197 ! Fit after self-cal, rms=0.083677Jy sigma=1.206160 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127023 Jy ! Component: 100 - total flux cleaned = -9.18231e-05 Jy ! Component: 150 - total flux cleaned = -7.52685e-05 Jy ! Component: 200 - total flux cleaned = -4.50931e-05 Jy ! Total flux subtracted in 200 components = -4.50931e-05 Jy ! Clean residual min=-0.001617 max=0.001130 Jy/beam ! Clean residual mean=0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.151554 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 139 components and 0.151554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083671Jy sigma=1.206132 ! Fit after self-cal, rms=0.083670Jy sigma=1.206099 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8167 mas, bmaj=2.278 mas, bpa=1.033 degrees ! Estimated noise=0.219546 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8167 x 2.278 at 1.033 degrees (North through East) ! Clean map min=-0.0013187 max=0.094657 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6081 mas, bmaj=1.785 mas, bpa=0.6 degrees ! Estimated noise=0.511612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077717 Jy ! Component: 100 - total flux cleaned = 0.0976696 Jy ! Component: 150 - total flux cleaned = 0.10914 Jy ! Component: 200 - total flux cleaned = 0.117467 Jy ! Total flux subtracted in 200 components = 0.117467 Jy ! Clean residual min=-0.003716 max=0.007311 Jy/beam ! Clean residual mean=0.000005 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.117467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.117467 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8167 mas, bmaj=2.278 mas, bpa=1.033 degrees ! Estimated noise=0.219546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117511 Jy ! Component: 100 - total flux cleaned = 0.018327 Jy ! Component: 150 - total flux cleaned = 0.0226407 Jy ! Component: 200 - total flux cleaned = 0.0255594 Jy ! Total flux subtracted in 200 components = 0.0255594 Jy ! Clean residual min=-0.001785 max=0.002075 Jy/beam ! Clean residual mean=0.000004 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.143027 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 55 components and 0.143027 Jy ! Inverting map ! Added new window around map position (-1.4, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225749 Jy ! Component: 100 - total flux cleaned = 0.00400697 Jy ! Component: 150 - total flux cleaned = 0.00534113 Jy ! Component: 200 - total flux cleaned = 0.00617333 Jy ! Total flux subtracted in 200 components = 0.00617333 Jy ! Clean residual min=-0.001580 max=0.001256 Jy/beam ! Clean residual mean=0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.1492 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 80 components and 0.1492 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.332 mas, bmaj=6.855 mas, bpa=2.492 degrees ! Estimated noise=0.273236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127735 Jy ! Component: 100 - total flux cleaned = 0.00192838 Jy ! Component: 150 - total flux cleaned = 0.00231986 Jy ! Component: 200 - total flux cleaned = 0.00245683 Jy ! Total flux subtracted in 200 components = 0.00245683 Jy ! Clean residual min=-0.001907 max=0.001178 Jy/beam ! Clean residual mean=0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.151657 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126245 Jy ! Component: 100 - total flux cleaned = 0.000205016 Jy ! Component: 150 - total flux cleaned = 0.000241444 Jy ! Component: 200 - total flux cleaned = 0.00031006 Jy ! Total flux subtracted in 200 components = 0.00031006 Jy ! Clean residual min=-0.001842 max=0.001151 Jy/beam ! Clean residual mean=0.000003 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.151967 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 117 components and 0.151967 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8167 mas, bmaj=2.278 mas, bpa=1.033 degrees ! Estimated noise=0.219546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179724 Jy ! Component: 100 - total flux cleaned = 0.000176066 Jy ! Component: 150 - total flux cleaned = 0.000234256 Jy ! Component: 200 - total flux cleaned = 0.000260643 Jy ! Total flux subtracted in 200 components = 0.000260643 Jy ! Clean residual min=-0.001415 max=0.001162 Jy/beam ! Clean residual mean=0.000001 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.152227 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.152227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083635Jy sigma=1.205885 ! Fit after self-cal, rms=0.083619Jy sigma=1.205719 wmodel J0751-3331_X_a_map.mod ! Writing 134 model components to file: J0751-3331_X_a_map.mod wobs J0751-3331_X_a_uvs.fits ! Writing UV FITS file: J0751-3331_X_a_uvs.fits wwins J0751-3331_X_a_map.win ! wwins: Wrote 9 windows to J0751-3331_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490291 Jy ! Component: 100 - total flux cleaned = -0.000797942 Jy ! Component: 150 - total flux cleaned = -0.0008803 Jy ! Component: 200 - total flux cleaned = -0.000959001 Jy ! Component: 250 - total flux cleaned = -0.00101577 Jy ! Component: 300 - total flux cleaned = -0.00105277 Jy ! Component: 350 - total flux cleaned = -0.00119695 Jy ! Component: 400 - total flux cleaned = -0.0012672 Jy ! Component: 450 - total flux cleaned = -0.00135349 Jy ! Component: 500 - total flux cleaned = -0.00147122 Jy ! Component: 550 - total flux cleaned = -0.0015039 Jy ! Component: 600 - total flux cleaned = -0.00147094 Jy ! Component: 650 - total flux cleaned = -0.001471 Jy ! Component: 700 - total flux cleaned = -0.00145548 Jy ! Component: 750 - total flux cleaned = -0.00142448 Jy ! Component: 800 - total flux cleaned = -0.00137869 Jy ! Component: 850 - total flux cleaned = -0.00137852 Jy ! Component: 900 - total flux cleaned = -0.00131913 Jy ! Component: 950 - total flux cleaned = -0.00134843 Jy ! Component: 1000 - total flux cleaned = -0.00129068 Jy ! Component: 1050 - total flux cleaned = -0.00126207 Jy ! Component: 1100 - total flux cleaned = -0.00117742 Jy ! Component: 1150 - total flux cleaned = -0.00116346 Jy ! Component: 1200 - total flux cleaned = -0.00110816 Jy ! Component: 1250 - total flux cleaned = -0.00109443 Jy ! Component: 1300 - total flux cleaned = -0.00106746 Jy ! Component: 1350 - total flux cleaned = -0.00101427 Jy ! Component: 1400 - total flux cleaned = -0.00102763 Jy ! Component: 1450 - total flux cleaned = -0.00097527 Jy ! Component: 1500 - total flux cleaned = -0.000936256 Jy ! Component: 1550 - total flux cleaned = -0.000871817 Jy ! Component: 1600 - total flux cleaned = -0.000846276 Jy ! Component: 1650 - total flux cleaned = -0.000782941 Jy ! Component: 1700 - total flux cleaned = -0.000732623 Jy ! Component: 1750 - total flux cleaned = -0.000670596 Jy ! Component: 1800 - total flux cleaned = -0.000658234 Jy ! Component: 1850 - total flux cleaned = -0.000609093 Jy ! Component: 1900 - total flux cleaned = -0.000535969 Jy ! Component: 1950 - total flux cleaned = -0.000523869 Jy ! Component: 2000 - total flux cleaned = -0.000523813 Jy ! Component: 2050 - total flux cleaned = -0.000440572 Jy ! Component: 2100 - total flux cleaned = -0.00045228 Jy ! Component: 2150 - total flux cleaned = -0.00038209 Jy ! Component: 2200 - total flux cleaned = -0.00041676 Jy ! Component: 2250 - total flux cleaned = -0.000335904 Jy ! Component: 2300 - total flux cleaned = -0.000301538 Jy ! Component: 2350 - total flux cleaned = -0.000255995 Jy ! Component: 2400 - total flux cleaned = -0.000210852 Jy ! Component: 2450 - total flux cleaned = -0.000199636 Jy ! Component: 2500 - total flux cleaned = -0.000155014 Jy ! Component: 2550 - total flux cleaned = -0.00012184 Jy ! Component: 2600 - total flux cleaned = -8.88147e-05 Jy ! Component: 2650 - total flux cleaned = -4.50875e-05 Jy ! Component: 2700 - total flux cleaned = 9.10702e-06 Jy ! Component: 2750 - total flux cleaned = 1.99221e-05 Jy ! Component: 2800 - total flux cleaned = 7.34556e-05 Jy ! Component: 2850 - total flux cleaned = 7.36047e-05 Jy ! Component: 2900 - total flux cleaned = 0.000147633 Jy ! Component: 2950 - total flux cleaned = 0.000179175 Jy ! Component: 3000 - total flux cleaned = 0.000158264 Jy ! Component: 3050 - total flux cleaned = 0.000189509 Jy ! Component: 3100 - total flux cleaned = 0.000230839 Jy ! Component: 3150 - total flux cleaned = 0.000210331 Jy ! Component: 3200 - total flux cleaned = 0.000240958 Jy ! Component: 3250 - total flux cleaned = 0.000281632 Jy ! Component: 3300 - total flux cleaned = 0.000221071 Jy ! Component: 3350 - total flux cleaned = 0.000251236 Jy ! Component: 3400 - total flux cleaned = 0.000301175 Jy ! Component: 3450 - total flux cleaned = 0.000291276 Jy ! Component: 3500 - total flux cleaned = 0.000330829 Jy ! Component: 3550 - total flux cleaned = 0.000321033 Jy ! Component: 3600 - total flux cleaned = 0.000379681 Jy ! Component: 3650 - total flux cleaned = 0.000360093 Jy ! Component: 3700 - total flux cleaned = 0.000369791 Jy ! Component: 3750 - total flux cleaned = 0.000379342 Jy ! Component: 3800 - total flux cleaned = 0.000398547 Jy ! Component: 3850 - total flux cleaned = 0.000398559 Jy ! Component: 3900 - total flux cleaned = 0.000360661 Jy ! Component: 3950 - total flux cleaned = 0.000370086 Jy ! Component: 4000 - total flux cleaned = 0.000417028 Jy ! Component: 4050 - total flux cleaned = 0.000407709 Jy ! Total flux subtracted in 4096 components = 0.000398435 Jy ! Clean residual min=-0.000581 max=0.000508 Jy/beam ! Clean residual mean=0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.152626 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 465 components and 0.152626 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0751-3331_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8167 x 2.278 at 1.033 degrees (North through East) ! Clean map min=-0.0010396 max=0.096122 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0751-3331_X_a_map.fits wmodel /vlbi/uf001/uvm//J0751-3331_X_a_map.mod ! Writing 465 model components to file: /vlbi/uf001/uvm//J0751-3331_X_a_map.mod wobs /vlbi/uf001/uvm//J0751-3331_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0751-3331_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0751-3331_X_a_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uvm//J0751-3331_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0961219 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164721 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.514101 0.514101 1.0282 2.0564 4.11281 8.22562 16.4512 32.9025 65.805 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.096 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 583.542 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0751-3331_X_a_dfm.log closed on Sun Jan 13 21:04:07 2019