! Started logfile: /vlbi/uf001/uvm//J0751-3331_S_a_dfm.log on Sun Jan 13 21:03:56 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0751-3331_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0751-3331_S_a_uvm.fits
! AN table 1: 29 integrations on 21 of 21 possible baselines.
! AN table 2: 29 integrations on 36 of 36 possible baselines.
! AN table 3: 29 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.993239 visibilities/baseline/integration-bin.
! Found source: J0751-3331
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8814 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0751-3331_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 10 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 10 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  A total of 10 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.015110Jy  sigma=14.367631
! Fit after  self-cal, rms=0.894337Jy  sigma=12.593507
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.394 mas, bmaj=7.522 mas, bpa=-1.517 degrees
! Estimated noise=0.917287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0765312 Jy
! Component: 100  -  total flux cleaned = 0.105084 Jy
! Total flux subtracted in 100 components = 0.105084 Jy
! Clean residual min=-0.006522 max=0.014634 Jy/beam
! Clean residual mean=-0.000030 rms=0.002050 Jy/beam
! Combined flux in latest and established models = 0.105084 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.105084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100319Jy  sigma=1.332216
! Fit after  self-cal, rms=0.099921Jy  sigma=1.327172
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175104 Jy
! Component: 100  -  total flux cleaned = 0.0287047 Jy
! Total flux subtracted in 100 components = 0.0287047 Jy
! Clean residual min=-0.005052 max=0.009197 Jy/beam
! Clean residual mean=-0.000015 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 0.133788 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 39 components and 0.133788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095238Jy  sigma=1.240034
! Fit after  self-cal, rms=0.095205Jy  sigma=1.239490
! Inverting map 
! Added new window around map position (3.5, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094363 Jy
! Component: 100  -  total flux cleaned = 0.0156564 Jy
! Total flux subtracted in 100 components = 0.0156564 Jy
! Clean residual min=-0.004427 max=0.006771 Jy/beam
! Clean residual mean=-0.000007 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 0.149445 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.149445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093748Jy  sigma=1.213444
! Fit after  self-cal, rms=0.093655Jy  sigma=1.212385
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.063 mas, bmaj=8.728 mas, bpa=-0.4618 degrees
! Estimated noise=0.553461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00891602 Jy
! Component: 100  -  total flux cleaned = 0.013974 Jy
! Component: 150  -  total flux cleaned = 0.0171642 Jy
! Component: 200  -  total flux cleaned = 0.0192559 Jy
! Total flux subtracted in 200 components = 0.0192559 Jy
! Clean residual min=-0.003470 max=0.005448 Jy/beam
! Clean residual mean=0.000002 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.168701 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 95 components and 0.168701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092846Jy  sigma=1.197835
! Fit after  self-cal, rms=0.092719Jy  sigma=1.196135
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.063 x 8.728 at -0.4618 degrees (North through East)
! Clean map  min=-0.0032635  max=0.099565 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.15     KP        0.96     LA        0.90     NL        1.03     
!   OV        0.92     PT        1.01     SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        1.00     KP        0.99     LA        0.99     
!   MK        0.92     NL        1.17     OV        0.97     PT        1.05     
!   SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.89     FD        0.96     HN        1.22     KP        0.97     
!   LA        0.94     MK        1.12     NL        1.27     OV        0.93     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.01     KP        1.02     LA        0.97     NL        1.06     
!   OV        1.01     PT        0.96     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.95     KP        0.98     LA        0.99     
!   MK        0.96     NL        1.21     OV        0.93     PT        1.08     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.96     FD        0.92     HN        1.47     KP        0.98     
!   LA        0.95     MK        0.95     NL        1.21     OV        0.90     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.02     KP        1.07     LA        0.97     NL        0.96     
!   OV        0.87     PT        1.05     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        0.94     KP        1.00     LA        0.98     
!   MK        0.95     NL        1.07     OV        0.97     PT        1.04     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     FD        0.94     HN        1.25     KP        1.07     
!   LA        0.96     MK        1.05     NL        1.20     OV        0.97     
!   PT        0.96     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.092719Jy  sigma=1.196135
! Fit after  self-cal, rms=0.100146Jy  sigma=1.183152
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.068 mas, bmaj=8.725 mas, bpa=-0.1188 degrees
! Estimated noise=0.55494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00048808 Jy
! Component: 100  -  total flux cleaned = -0.000602654 Jy
! Component: 150  -  total flux cleaned = -0.000699785 Jy
! Component: 200  -  total flux cleaned = -0.000789624 Jy
! Total flux subtracted in 200 components = -0.000789624 Jy
! Clean residual min=-0.002513 max=0.002552 Jy/beam
! Clean residual mean=-0.000004 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.167911 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 114 components and 0.167911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100115Jy  sigma=1.182837
! Fit after  self-cal, rms=0.100359Jy  sigma=1.182476
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100359Jy  sigma=1.182476
! Fit after  self-cal, rms=0.100857Jy  sigma=1.182440
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.064 mas, bmaj=8.712 mas, bpa=-0.08795 degrees
! Estimated noise=0.553887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000455592 Jy
! Component: 100  -  total flux cleaned = -0.000513095 Jy
! Component: 150  -  total flux cleaned = -0.000538952 Jy
! Component: 200  -  total flux cleaned = -0.000610565 Jy
! Total flux subtracted in 200 components = -0.000610565 Jy
! Clean residual min=-0.002573 max=0.002510 Jy/beam
! Clean residual mean=-0.000004 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.167301 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 119 components and 0.1673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100838Jy  sigma=1.182254
! Fit after  self-cal, rms=0.100853Jy  sigma=1.182232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150521 Jy
! Component: 100  -  total flux cleaned = -0.000174353 Jy
! Component: 150  -  total flux cleaned = -0.000196833 Jy
! Component: 200  -  total flux cleaned = -0.000218597 Jy
! Total flux subtracted in 200 components = -0.000218597 Jy
! Clean residual min=-0.002573 max=0.002506 Jy/beam
! Clean residual mean=-0.000004 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.167082 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 130 components and 0.167082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100840Jy  sigma=1.182114
! Fit after  self-cal, rms=0.100840Jy  sigma=1.182105
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100840Jy  sigma=1.182105
! Fit after  self-cal, rms=0.101004Jy  sigma=1.182078
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.06 mas, bmaj=8.699 mas, bpa=-0.05564 degrees
! Estimated noise=0.552397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00045861 Jy
! Component: 100  -  total flux cleaned = -0.00047889 Jy
! Component: 150  -  total flux cleaned = -0.00049929 Jy
! Component: 200  -  total flux cleaned = -0.000537471 Jy
! Total flux subtracted in 200 components = -0.000537471 Jy
! Clean residual min=-0.002561 max=0.002510 Jy/beam
! Clean residual mean=-0.000004 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.166544 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 135 components and 0.166544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100993Jy  sigma=1.181971
! Fit after  self-cal, rms=0.101001Jy  sigma=1.181958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140347 Jy
! Component: 100  -  total flux cleaned = -0.000159151 Jy
! Component: 150  -  total flux cleaned = -0.00017628 Jy
! Component: 200  -  total flux cleaned = -0.000192531 Jy
! Total flux subtracted in 200 components = -0.000192531 Jy
! Clean residual min=-0.002561 max=0.002501 Jy/beam
! Clean residual mean=-0.000004 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.166352 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 141 components and 0.166352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100993Jy  sigma=1.181887
! Fit after  self-cal, rms=0.100992Jy  sigma=1.181879
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100992Jy  sigma=1.181879
! Fit after  self-cal, rms=0.101122Jy  sigma=1.181857
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.963 mas, bmaj=22.49 mas, bpa=2.191 degrees
! Estimated noise=0.700522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00024574 Jy
! Component: 100  -  total flux cleaned = -0.000260306 Jy
! Component: 150  -  total flux cleaned = -0.000248723 Jy
! Component: 200  -  total flux cleaned = -0.000259791 Jy
! Total flux subtracted in 200 components = -0.000259791 Jy
! Clean residual min=-0.002674 max=0.002810 Jy/beam
! Clean residual mean=-0.000009 rms=0.000745 Jy/beam
! Combined flux in latest and established models = 0.166092 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 147 components and 0.166092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101117Jy  sigma=1.181838
! Fit after  self-cal, rms=0.101127Jy  sigma=1.181827
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.49154e-05 Jy
! Component: 100  -  total flux cleaned = -4.38384e-05 Jy
! Component: 150  -  total flux cleaned = -4.35272e-05 Jy
! Component: 200  -  total flux cleaned = -5.30366e-05 Jy
! Total flux subtracted in 200 components = -5.30366e-05 Jy
! Clean residual min=-0.002662 max=0.002809 Jy/beam
! Clean residual mean=-0.000009 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.166039 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 153 components and 0.166039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101125Jy  sigma=1.181830
! Fit after  self-cal, rms=0.101127Jy  sigma=1.181825
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.058 mas, bmaj=8.69 mas, bpa=-0.02906 degrees
! Estimated noise=0.551238 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.058 x 8.69 at -0.02906 degrees (North through East)
! Clean map  min=-0.0024147  max=0.099588 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.386 mas, bmaj=7.477 mas, bpa=-1.079 degrees
! Estimated noise=0.914111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0759949 Jy
! Component: 100  -  total flux cleaned = 0.10592 Jy
! Component: 150  -  total flux cleaned = 0.123885 Jy
! Component: 200  -  total flux cleaned = 0.135864 Jy
! Total flux subtracted in 200 components = 0.135864 Jy
! Clean residual min=-0.004951 max=0.006797 Jy/beam
! Clean residual mean=-0.000021 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 0.135864 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.135864 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.058 mas, bmaj=8.69 mas, bpa=-0.02906 degrees
! Estimated noise=0.551238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124827 Jy
! Component: 100  -  total flux cleaned = 0.0194411 Jy
! Component: 150  -  total flux cleaned = 0.0235838 Jy
! Component: 200  -  total flux cleaned = 0.0261967 Jy
! Total flux subtracted in 200 components = 0.0261967 Jy
! Clean residual min=-0.002772 max=0.002635 Jy/beam
! Clean residual mean=-0.000009 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.16206 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 108 components and 0.16206 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.963 mas, bmaj=22.49 mas, bpa=2.191 degrees
! Estimated noise=0.700522 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250606 Jy
! Component: 100  -  total flux cleaned = 0.00352802 Jy
! Component: 150  -  total flux cleaned = 0.00379302 Jy
! Component: 200  -  total flux cleaned = 0.00380964 Jy
! Total flux subtracted in 200 components = 0.00380964 Jy
! Clean residual min=-0.002693 max=0.002763 Jy/beam
! Clean residual mean=-0.000009 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.16587 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.54762e-05 Jy
! Component: 100  -  total flux cleaned = -2.94823e-05 Jy
! Component: 150  -  total flux cleaned = -4.30121e-05 Jy
! Component: 200  -  total flux cleaned = -4.29237e-05 Jy
! Total flux subtracted in 200 components = -4.29237e-05 Jy
! Clean residual min=-0.002675 max=0.002765 Jy/beam
! Clean residual mean=-0.000009 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.165827 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 131 components and 0.165827 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.058 mas, bmaj=8.69 mas, bpa=-0.02906 degrees
! Estimated noise=0.551238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000726674 Jy
! Component: 100  -  total flux cleaned = -0.00076741 Jy
! Component: 150  -  total flux cleaned = -0.000800546 Jy
! Component: 200  -  total flux cleaned = -0.000800287 Jy
! Total flux subtracted in 200 components = -0.000800287 Jy
! Clean residual min=-0.002525 max=0.002600 Jy/beam
! Clean residual mean=-0.000005 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.165027 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 144 components and 0.165027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101162Jy  sigma=1.182182
! Fit after  self-cal, rms=0.101153Jy  sigma=1.182073
wmodel J0751-3331_S_a_map.mod
! Writing 144 model components to file: J0751-3331_S_a_map.mod
wobs   J0751-3331_S_a_uvs.fits
! Writing UV FITS file: J0751-3331_S_a_uvs.fits
wwins  J0751-3331_S_a_map.win
! wwins: Wrote 3 windows to J0751-3331_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.85221e-05 Jy
! Component: 100  -  total flux cleaned = -0.000251168 Jy
! Component: 150  -  total flux cleaned = -0.000373136 Jy
! Component: 200  -  total flux cleaned = -0.000531957 Jy
! Component: 250  -  total flux cleaned = -0.000608328 Jy
! Component: 300  -  total flux cleaned = -0.000607795 Jy
! Component: 350  -  total flux cleaned = -0.000643971 Jy
! Component: 400  -  total flux cleaned = -0.000818818 Jy
! Component: 450  -  total flux cleaned = -0.00098905 Jy
! Component: 500  -  total flux cleaned = -0.00118939 Jy
! Component: 550  -  total flux cleaned = -0.00132033 Jy
! Component: 600  -  total flux cleaned = -0.0014489 Jy
! Component: 650  -  total flux cleaned = -0.00157495 Jy
! Component: 700  -  total flux cleaned = -0.00166809 Jy
! Component: 750  -  total flux cleaned = -0.00179085 Jy
! Component: 800  -  total flux cleaned = -0.00194083 Jy
! Component: 850  -  total flux cleaned = -0.00208889 Jy
! Component: 900  -  total flux cleaned = -0.00211806 Jy
! Component: 950  -  total flux cleaned = -0.00223377 Jy
! Component: 1000  -  total flux cleaned = -0.00234736 Jy
! Component: 1050  -  total flux cleaned = -0.00251522 Jy
! Component: 1100  -  total flux cleaned = -0.00251551 Jy
! Component: 1150  -  total flux cleaned = -0.00262517 Jy
! Component: 1200  -  total flux cleaned = -0.00270615 Jy
! Component: 1250  -  total flux cleaned = -0.00273292 Jy
! Component: 1300  -  total flux cleaned = -0.00283812 Jy
! Component: 1350  -  total flux cleaned = -0.00283807 Jy
! Component: 1400  -  total flux cleaned = -0.00288941 Jy
! Component: 1450  -  total flux cleaned = -0.00288902 Jy
! Component: 1500  -  total flux cleaned = -0.00283901 Jy
! Component: 1550  -  total flux cleaned = -0.00288846 Jy
! Component: 1600  -  total flux cleaned = -0.00293726 Jy
! Component: 1650  -  total flux cleaned = -0.00286431 Jy
! Component: 1700  -  total flux cleaned = -0.00298442 Jy
! Component: 1750  -  total flux cleaned = -0.00298449 Jy
! Component: 1800  -  total flux cleaned = -0.00303141 Jy
! Component: 1850  -  total flux cleaned = -0.00312427 Jy
! Component: 1900  -  total flux cleaned = -0.00312441 Jy
! Component: 1950  -  total flux cleaned = -0.00314732 Jy
! Component: 2000  -  total flux cleaned = -0.00321545 Jy
! Component: 2050  -  total flux cleaned = -0.00323756 Jy
! Component: 2100  -  total flux cleaned = -0.00337069 Jy
! Component: 2150  -  total flux cleaned = -0.00334865 Jy
! Component: 2200  -  total flux cleaned = -0.00334852 Jy
! Component: 2250  -  total flux cleaned = -0.00337009 Jy
! Component: 2300  -  total flux cleaned = -0.00341299 Jy
! Component: 2350  -  total flux cleaned = -0.00351904 Jy
! Component: 2400  -  total flux cleaned = -0.00343478 Jy
! Component: 2450  -  total flux cleaned = -0.00347646 Jy
! Component: 2500  -  total flux cleaned = -0.00343576 Jy
! Component: 2550  -  total flux cleaned = -0.00351761 Jy
! Component: 2600  -  total flux cleaned = -0.00339599 Jy
! Component: 2650  -  total flux cleaned = -0.00349672 Jy
! Component: 2700  -  total flux cleaned = -0.0035167 Jy
! Component: 2750  -  total flux cleaned = -0.00347715 Jy
! Component: 2800  -  total flux cleaned = -0.00347729 Jy
! Component: 2850  -  total flux cleaned = -0.00343846 Jy
! Component: 2900  -  total flux cleaned = -0.00347733 Jy
! Component: 2950  -  total flux cleaned = -0.00343907 Jy
! Component: 3000  -  total flux cleaned = -0.0034585 Jy
! Component: 3050  -  total flux cleaned = -0.00343979 Jy
! Component: 3100  -  total flux cleaned = -0.00340249 Jy
! Component: 3150  -  total flux cleaned = -0.00349526 Jy
! Component: 3200  -  total flux cleaned = -0.00345831 Jy
! Component: 3250  -  total flux cleaned = -0.00342163 Jy
! Component: 3300  -  total flux cleaned = -0.00336732 Jy
! Component: 3350  -  total flux cleaned = -0.00343937 Jy
! Component: 3400  -  total flux cleaned = -0.0033498 Jy
! Component: 3450  -  total flux cleaned = -0.00338531 Jy
! Component: 3500  -  total flux cleaned = -0.00340293 Jy
! Component: 3550  -  total flux cleaned = -0.00340291 Jy
! Component: 3600  -  total flux cleaned = -0.0034551 Jy
! Component: 3650  -  total flux cleaned = -0.00343783 Jy
! Component: 3700  -  total flux cleaned = -0.00343787 Jy
! Component: 3750  -  total flux cleaned = -0.00350604 Jy
! Component: 3800  -  total flux cleaned = -0.00348894 Jy
! Component: 3850  -  total flux cleaned = -0.00353951 Jy
! Component: 3900  -  total flux cleaned = -0.00357293 Jy
! Component: 3950  -  total flux cleaned = -0.00358967 Jy
! Component: 4000  -  total flux cleaned = -0.00360625 Jy
! Component: 4050  -  total flux cleaned = -0.00365571 Jy
! Total flux subtracted in 4096 components = -0.0036718 Jy
! Clean residual min=-0.000880 max=0.000974 Jy/beam
! Clean residual mean=-0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.161355 Jy
keep
! Adding 299 model components to the UV plane model.
! The established model now contains 443 components and 0.161355 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0751-3331_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.058 x 8.69 at -0.02906 degrees (North through East)
! Clean map  min=-0.0018205  max=0.10153 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0751-3331_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0751-3331_S_a_map.mod
! Writing 443 model components to file: /vlbi/uf001/uvm//J0751-3331_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0751-3331_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0751-3331_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0751-3331_S_a_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J0751-3331_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.101532 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000296655 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.876538 0.876538 1.75308 3.50615 7.0123 14.0246 28.0492 56.0984
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.101 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  342.255 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0751-3331_S_a_dfm.log closed on Sun Jan 13 21:04:00 2019