! Started logfile: /vlbi/uf001/uva//J0750+8241_X_dfm.log on Sun Jan 13 23:39:36 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0750+8241_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0750+8241_X_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.869841 visibilities/baseline/integration-bin. ! Found source: J0750+8241 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26304 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0750+8241_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.028486Jy sigma=22.349818 ! Fit after self-cal, rms=0.830543Jy sigma=18.041128 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8073 mas, bmaj=0.9491 mas, bpa=9.681 degrees ! Estimated noise=0.39602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119414 Jy ! Component: 100 - total flux cleaned = 0.171425 Jy ! Total flux subtracted in 100 components = 0.171425 Jy ! Clean residual min=-0.019875 max=0.067050 Jy/beam ! Clean residual mean=0.000016 rms=0.004283 Jy/beam ! Combined flux in latest and established models = 0.171425 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.171425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146913Jy sigma=3.086935 ! Fit after self-cal, rms=0.145161Jy sigma=3.049132 ! Inverting map ! Added new window around map position (0.6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665264 Jy ! Component: 100 - total flux cleaned = 0.101001 Jy ! Total flux subtracted in 100 components = 0.101001 Jy ! Clean residual min=-0.013711 max=0.025881 Jy/beam ! Clean residual mean=0.000009 rms=0.002672 Jy/beam ! Combined flux in latest and established models = 0.272426 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.272426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100643Jy sigma=2.099451 ! Fit after self-cal, rms=0.093479Jy sigma=1.946954 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312606 Jy ! Component: 100 - total flux cleaned = 0.0500697 Jy ! Total flux subtracted in 100 components = 0.0500697 Jy ! Clean residual min=-0.008345 max=0.014766 Jy/beam ! Clean residual mean=0.000005 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.322495 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.322495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076875Jy sigma=1.587409 ! Fit after self-cal, rms=0.075543Jy sigma=1.559695 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160969 Jy ! Component: 100 - total flux cleaned = 0.0269413 Jy ! Total flux subtracted in 100 components = 0.0269413 Jy ! Clean residual min=-0.006138 max=0.010008 Jy/beam ! Clean residual mean=0.000003 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.349437 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.349437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069815Jy sigma=1.435591 ! Fit after self-cal, rms=0.069451Jy sigma=1.428109 ! Inverting map ! Added new window around map position (-0.2, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00947123 Jy ! Component: 100 - total flux cleaned = 0.0164153 Jy ! Total flux subtracted in 100 components = 0.0164153 Jy ! Clean residual min=-0.005455 max=0.007441 Jy/beam ! Clean residual mean=0.000002 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 0.365852 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.365852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067172Jy sigma=1.380069 ! Fit after self-cal, rms=0.067035Jy sigma=1.377214 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.203 mas, bpa=12.95 degrees ! Estimated noise=0.220685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00957774 Jy ! Component: 100 - total flux cleaned = 0.0157734 Jy ! Component: 150 - total flux cleaned = 0.0201084 Jy ! Component: 200 - total flux cleaned = 0.0231795 Jy ! Total flux subtracted in 200 components = 0.0231795 Jy ! Clean residual min=-0.006293 max=0.007686 Jy/beam ! Clean residual mean=-0.000004 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.389031 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 47 components and 0.389032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065341Jy sigma=1.342515 ! Fit after self-cal, rms=0.065173Jy sigma=1.338710 ! Inverting map ! Added new window around map position (0.2, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702683 Jy ! Component: 100 - total flux cleaned = 0.0110265 Jy ! Component: 150 - total flux cleaned = 0.0139485 Jy ! Component: 200 - total flux cleaned = 0.0155128 Jy ! Total flux subtracted in 200 components = 0.0155128 Jy ! Clean residual min=-0.005800 max=0.005264 Jy/beam ! Clean residual mean=-0.000005 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.404544 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 75 components and 0.404544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064254Jy sigma=1.320957 ! Fit after self-cal, rms=0.064143Jy sigma=1.318268 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.048 x 1.203 at 12.95 degrees (North through East) ! Clean map min=-0.0054666 max=0.15744 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.87 KP 1.01 ! LA 1.02 MK 1.02 NL 1.03 OV 0.92 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 0.85 KP 1.02 ! LA 1.01 MK 1.00 NL 1.02 OV 0.93 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 HN 0.88 KP 1.01 ! LA 1.02 MK 1.01 NL 1.04 OV 0.93 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.06 HN 0.90 KP 1.02 ! LA 1.02 MK 1.01 NL 1.03 OV 0.93 ! PT 0.92 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.90 KP 1.02 ! LA 1.02 MK 1.02 NL 1.01 OV 0.94 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 0.89 KP 1.02 ! LA 1.02 MK 1.01 NL 1.02 OV 0.95 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.06 HN 0.90 KP 1.01 ! LA 1.03 MK 1.03 NL 1.03 OV 0.93 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 0.91 KP 1.02 ! LA 1.02 MK 1.03 NL 1.05 OV 0.95 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 0.87 KP 1.01 ! LA 1.03 MK 1.02 NL 1.04 OV 0.97 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 0.90 KP 1.01 ! LA 1.04 MK 1.02 NL 1.05 OV 0.95 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.06 HN 0.89 KP 1.02 ! LA 1.04 MK 0.97 NL 1.03 OV 0.94 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 0.83 KP 1.03 ! LA 1.03 MK 0.94 NL 1.05 OV 0.96 ! PT 0.93 SC 0.98 ! ! ! Fit before self-cal, rms=0.064143Jy sigma=1.318268 ! Fit after self-cal, rms=0.060462Jy sigma=1.266839 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.042 mas, bmaj=1.195 mas, bpa=13.92 degrees ! Estimated noise=0.218734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236302 Jy ! Component: 100 - total flux cleaned = 0.000661707 Jy ! Component: 150 - total flux cleaned = 0.000989421 Jy ! Component: 200 - total flux cleaned = 0.00132346 Jy ! Total flux subtracted in 200 components = 0.00132346 Jy ! Clean residual min=-0.003681 max=0.003979 Jy/beam ! Clean residual mean=-0.000001 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.405868 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.405868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060234Jy sigma=1.262173 ! Fit after self-cal, rms=0.060225Jy sigma=1.261412 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060225Jy sigma=1.261412 ! Fit after self-cal, rms=0.059831Jy sigma=1.208193 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.039 mas, bmaj=1.189 mas, bpa=14.25 degrees ! Estimated noise=0.219156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140501 Jy ! Component: 100 - total flux cleaned = 0.0015396 Jy ! Component: 150 - total flux cleaned = 0.00147755 Jy ! Component: 200 - total flux cleaned = 0.00147537 Jy ! Total flux subtracted in 200 components = 0.00147537 Jy ! Clean residual min=-0.001963 max=0.003381 Jy/beam ! Clean residual mean=-0.000003 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.407343 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 98 components and 0.407343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059697Jy sigma=1.205127 ! Fit after self-cal, rms=0.059771Jy sigma=1.204757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331709 Jy ! Component: 100 - total flux cleaned = 0.00522661 Jy ! Component: 150 - total flux cleaned = 0.0060796 Jy ! Component: 200 - total flux cleaned = 0.00648341 Jy ! Total flux subtracted in 200 components = 0.00648341 Jy ! Clean residual min=-0.001749 max=0.002705 Jy/beam ! Clean residual mean=-0.000003 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.413827 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 120 components and 0.413827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059564Jy sigma=1.200033 ! Fit after self-cal, rms=0.059545Jy sigma=1.199738 ! Inverting map ! Added new window around map position (0.2, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249627 Jy ! Component: 100 - total flux cleaned = 0.00307634 Jy ! Component: 150 - total flux cleaned = 0.00341208 Jy ! Component: 200 - total flux cleaned = 0.0036293 Jy ! Total flux subtracted in 200 components = 0.0036293 Jy ! Clean residual min=-0.001591 max=0.002181 Jy/beam ! Clean residual mean=-0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.417456 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 135 components and 0.417456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059417Jy sigma=1.196790 ! Fit after self-cal, rms=0.059404Jy sigma=1.196665 ! Inverting map ! Added new window around map position (-1.4, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194692 Jy ! Component: 100 - total flux cleaned = 0.00296822 Jy ! Component: 150 - total flux cleaned = 0.00343719 Jy ! Component: 200 - total flux cleaned = 0.00368534 Jy ! Total flux subtracted in 200 components = 0.00368534 Jy ! Clean residual min=-0.001514 max=0.001565 Jy/beam ! Clean residual mean=-0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.421141 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 0.421141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059324Jy sigma=1.194763 ! Fit after self-cal, rms=0.059318Jy sigma=1.194688 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059318Jy sigma=1.194688 ! Fit after self-cal, rms=0.059245Jy sigma=1.193531 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.187 mas, bpa=14.26 degrees ! Estimated noise=0.218379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127413 Jy ! Component: 100 - total flux cleaned = 0.00184643 Jy ! Component: 150 - total flux cleaned = 0.00223602 Jy ! Component: 200 - total flux cleaned = 0.00249564 Jy ! Total flux subtracted in 200 components = 0.00249564 Jy ! Clean residual min=-0.001415 max=0.001445 Jy/beam ! Clean residual mean=-0.000002 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.423637 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 167 components and 0.423637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059199Jy sigma=1.192459 ! Fit after self-cal, rms=0.059199Jy sigma=1.192415 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000469348 Jy ! Component: 100 - total flux cleaned = 0.000742345 Jy ! Component: 150 - total flux cleaned = 0.000941233 Jy ! Component: 200 - total flux cleaned = 0.00112973 Jy ! Total flux subtracted in 200 components = 0.00112973 Jy ! Clean residual min=-0.001408 max=0.001401 Jy/beam ! Clean residual mean=-0.000002 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.424766 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 175 components and 0.424767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059174Jy sigma=1.191828 ! Fit after self-cal, rms=0.059172Jy sigma=1.191810 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059172Jy sigma=1.191810 ! Fit after self-cal, rms=0.059114Jy sigma=1.191716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.487 mas, bmaj=2.584 mas, bpa=18.07 degrees ! Estimated noise=0.287477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107272 Jy ! Component: 100 - total flux cleaned = 0.0017239 Jy ! Component: 150 - total flux cleaned = 0.00227239 Jy ! Component: 200 - total flux cleaned = 0.00264473 Jy ! Total flux subtracted in 200 components = 0.00264473 Jy ! Clean residual min=-0.001613 max=0.002144 Jy/beam ! Clean residual mean=-0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.427411 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 202 components and 0.427411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059101Jy sigma=1.191527 ! Fit after self-cal, rms=0.059099Jy sigma=1.191426 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.6, 23.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221251 Jy ! Component: 100 - total flux cleaned = 0.0035721 Jy ! Component: 150 - total flux cleaned = 0.00460901 Jy ! Component: 200 - total flux cleaned = 0.00549173 Jy ! Total flux subtracted in 200 components = 0.00549173 Jy ! Clean residual min=-0.001424 max=0.001523 Jy/beam ! Clean residual mean=-0.000004 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.432903 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 257 components and 0.432903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059054Jy sigma=1.190517 ! Fit after self-cal, rms=0.059050Jy sigma=1.190462 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.187 mas, bpa=14.29 degrees ! Estimated noise=0.218126 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.038 x 1.187 at 14.29 degrees (North through East) ! Clean map min=-0.0011533 max=0.15392 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8044 mas, bmaj=0.9352 mas, bpa=11.93 degrees ! Estimated noise=0.386084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127353 Jy ! Component: 100 - total flux cleaned = 0.201607 Jy ! Component: 150 - total flux cleaned = 0.250666 Jy ! Component: 200 - total flux cleaned = 0.28401 Jy ! Total flux subtracted in 200 components = 0.28401 Jy ! Clean residual min=-0.007682 max=0.018687 Jy/beam ! Clean residual mean=0.000006 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 0.28401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.28401 Jy ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.187 mas, bpa=14.29 degrees ! Estimated noise=0.218126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365948 Jy ! Component: 100 - total flux cleaned = 0.0590711 Jy ! Component: 150 - total flux cleaned = 0.0738661 Jy ! Component: 200 - total flux cleaned = 0.0846058 Jy ! Total flux subtracted in 200 components = 0.0846058 Jy ! Clean residual min=-0.003113 max=0.006227 Jy/beam ! Clean residual mean=-0.000001 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.368616 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 54 components and 0.368616 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827176 Jy ! Component: 100 - total flux cleaned = 0.014884 Jy ! Component: 150 - total flux cleaned = 0.0203581 Jy ! Component: 200 - total flux cleaned = 0.0250105 Jy ! Total flux subtracted in 200 components = 0.0250105 Jy ! Clean residual min=-0.002334 max=0.003225 Jy/beam ! Clean residual mean=-0.000001 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.393626 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 95 components and 0.393626 Jy ! Inverting map ! Added new window around map position (-1.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405176 Jy ! Component: 100 - total flux cleaned = 0.00753024 Jy ! Component: 150 - total flux cleaned = 0.0105786 Jy ! Component: 200 - total flux cleaned = 0.013252 Jy ! Total flux subtracted in 200 components = 0.013252 Jy ! Clean residual min=-0.001885 max=0.001786 Jy/beam ! Clean residual mean=-0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.406878 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 123 components and 0.406878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.487 mas, bmaj=2.584 mas, bpa=18.07 degrees ! Estimated noise=0.287477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435682 Jy ! Component: 100 - total flux cleaned = 0.00757858 Jy ! Component: 150 - total flux cleaned = 0.0101412 Jy ! Component: 200 - total flux cleaned = 0.0123347 Jy ! Total flux subtracted in 200 components = 0.0123347 Jy ! Clean residual min=-0.002006 max=0.002053 Jy/beam ! Clean residual mean=-0.000003 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.419213 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192381 Jy ! Component: 100 - total flux cleaned = 0.00363099 Jy ! Component: 150 - total flux cleaned = 0.00515577 Jy ! Component: 200 - total flux cleaned = 0.0065264 Jy ! Total flux subtracted in 200 components = 0.0065264 Jy ! Clean residual min=-0.001579 max=0.001815 Jy/beam ! Clean residual mean=-0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.425739 Jy ! Adding 181 model components to the UV plane model. ! The established model now contains 279 components and 0.425739 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.038 mas, bmaj=1.187 mas, bpa=14.29 degrees ! Estimated noise=0.218126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139344 Jy ! Component: 100 - total flux cleaned = 0.00250199 Jy ! Component: 150 - total flux cleaned = 0.00349402 Jy ! Component: 200 - total flux cleaned = 0.00432909 Jy ! Total flux subtracted in 200 components = 0.00432909 Jy ! Clean residual min=-0.001459 max=0.001420 Jy/beam ! Clean residual mean=-0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.430068 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 306 components and 0.430068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058999Jy sigma=1.189591 ! Fit after self-cal, rms=0.058970Jy sigma=1.189047 wmodel J0750+8241_X_map.mod ! Writing 306 model components to file: J0750+8241_X_map.mod wobs J0750+8241_X_uvs.fits ! Writing UV FITS file: J0750+8241_X_uvs.fits wwins J0750+8241_X_map.win ! wwins: Wrote 9 windows to J0750+8241_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164833 Jy ! Component: 100 - total flux cleaned = -0.000296014 Jy ! Component: 150 - total flux cleaned = -0.000379009 Jy ! Component: 200 - total flux cleaned = -0.000560137 Jy ! Component: 250 - total flux cleaned = -0.000598868 Jy ! Component: 300 - total flux cleaned = -0.00063682 Jy ! Component: 350 - total flux cleaned = -0.000655605 Jy ! Component: 400 - total flux cleaned = -0.000673952 Jy ! Component: 450 - total flux cleaned = -0.000673988 Jy ! Component: 500 - total flux cleaned = -0.000727291 Jy ! Component: 550 - total flux cleaned = -0.000796769 Jy ! Component: 600 - total flux cleaned = -0.000830859 Jy ! Component: 650 - total flux cleaned = -0.000864864 Jy ! Component: 700 - total flux cleaned = -0.00091508 Jy ! Component: 750 - total flux cleaned = -0.000964442 Jy ! Component: 800 - total flux cleaned = -0.00104575 Jy ! Component: 850 - total flux cleaned = -0.00115799 Jy ! Component: 900 - total flux cleaned = -0.00115807 Jy ! Component: 950 - total flux cleaned = -0.00118983 Jy ! Component: 1000 - total flux cleaned = -0.00131448 Jy ! Component: 1050 - total flux cleaned = -0.00134507 Jy ! Component: 1100 - total flux cleaned = -0.00129931 Jy ! Component: 1150 - total flux cleaned = -0.00135983 Jy ! Component: 1200 - total flux cleaned = -0.00140478 Jy ! Component: 1250 - total flux cleaned = -0.00137521 Jy ! Component: 1300 - total flux cleaned = -0.00138996 Jy ! Component: 1350 - total flux cleaned = -0.0014191 Jy ! Component: 1400 - total flux cleaned = -0.00137566 Jy ! Component: 1450 - total flux cleaned = -0.00140434 Jy ! Component: 1500 - total flux cleaned = -0.00140457 Jy ! Component: 1550 - total flux cleaned = -0.00139071 Jy ! Component: 1600 - total flux cleaned = -0.00137677 Jy ! Component: 1650 - total flux cleaned = -0.00136293 Jy ! Component: 1700 - total flux cleaned = -0.00140444 Jy ! Component: 1750 - total flux cleaned = -0.00141819 Jy ! Component: 1800 - total flux cleaned = -0.00137748 Jy ! Component: 1850 - total flux cleaned = -0.00139092 Jy ! Component: 1900 - total flux cleaned = -0.00139096 Jy ! Component: 1950 - total flux cleaned = -0.00139101 Jy ! Component: 2000 - total flux cleaned = -0.00143059 Jy ! Component: 2050 - total flux cleaned = -0.00145682 Jy ! Component: 2100 - total flux cleaned = -0.00137877 Jy ! Component: 2150 - total flux cleaned = -0.00140462 Jy ! Component: 2200 - total flux cleaned = -0.00140471 Jy ! Component: 2250 - total flux cleaned = -0.00140468 Jy ! Component: 2300 - total flux cleaned = -0.00136667 Jy ! Component: 2350 - total flux cleaned = -0.00139178 Jy ! Component: 2400 - total flux cleaned = -0.00132932 Jy ! Component: 2450 - total flux cleaned = -0.00136657 Jy ! Component: 2500 - total flux cleaned = -0.00130492 Jy ! Component: 2550 - total flux cleaned = -0.00131719 Jy ! Component: 2600 - total flux cleaned = -0.00134172 Jy ! Component: 2650 - total flux cleaned = -0.00139019 Jy ! Component: 2700 - total flux cleaned = -0.00136604 Jy ! Component: 2750 - total flux cleaned = -0.00138997 Jy ! Component: 2800 - total flux cleaned = -0.00136613 Jy ! Component: 2850 - total flux cleaned = -0.00136628 Jy ! Component: 2900 - total flux cleaned = -0.00135442 Jy ! Component: 2950 - total flux cleaned = -0.00136626 Jy ! Component: 3000 - total flux cleaned = -0.00142457 Jy ! Component: 3050 - total flux cleaned = -0.00140132 Jy ! Component: 3100 - total flux cleaned = -0.0014012 Jy ! Component: 3150 - total flux cleaned = -0.00142406 Jy ! Component: 3200 - total flux cleaned = -0.00142402 Jy ! Component: 3250 - total flux cleaned = -0.00143544 Jy ! Component: 3300 - total flux cleaned = -0.00140155 Jy ! Component: 3350 - total flux cleaned = -0.0014129 Jy ! Component: 3400 - total flux cleaned = -0.0013794 Jy ! Component: 3450 - total flux cleaned = -0.00145702 Jy ! Component: 3500 - total flux cleaned = -0.00146789 Jy ! Component: 3550 - total flux cleaned = -0.00139105 Jy ! Component: 3600 - total flux cleaned = -0.00135841 Jy ! Component: 3650 - total flux cleaned = -0.00140185 Jy ! Component: 3700 - total flux cleaned = -0.00140181 Jy ! Component: 3750 - total flux cleaned = -0.00140164 Jy ! Component: 3800 - total flux cleaned = -0.00134824 Jy ! Component: 3850 - total flux cleaned = -0.00134825 Jy ! Component: 3900 - total flux cleaned = -0.00132707 Jy ! Component: 3950 - total flux cleaned = -0.00132704 Jy ! Component: 4000 - total flux cleaned = -0.00132713 Jy ! Component: 4050 - total flux cleaned = -0.00130631 Jy ! Total flux subtracted in 4096 components = -0.0013582 Jy ! Clean residual min=-0.000613 max=0.000704 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.42871 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 611 components and 0.42871 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0750+8241_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.038 x 1.187 at 14.29 degrees (North through East) ! Clean map min=-0.00098072 max=0.1538 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0750+8241_X_map.fits wmodel /vlbi/uf001/uva//J0750+8241_X_map.mod ! Writing 611 model components to file: /vlbi/uf001/uva//J0750+8241_X_map.mod wobs /vlbi/uf001/uva//J0750+8241_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0750+8241_X_uvs.fits wwins /vlbi/uf001/uva//J0750+8241_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0750+8241_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.1538 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017493 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.341217 0.341217 0.682433 1.36487 2.72973 5.45947 10.9189 21.8379 43.6757 87.3514 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.153 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 879.207 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0750+8241_X_dfm.log closed on Sun Jan 13 23:39:42 2019