! Started logfile: /vlbi/uf001/uvm//J0750+1919_S_a_dfm.log on Sun Jan 13 21:03:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0750+1919_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0750+1919_S_a_uvm.fits
! AN table 1: 88 integrations on 28 of 28 possible baselines.
! AN table 2: 118 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.937067 visibilities/baseline/integration-bin.
! Found source: J0750+1919
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 16215 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0750+1919_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  A total of 29 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003150Jy  sigma=22.062642
! Fit after  self-cal, rms=0.914679Jy  sigma=20.107876
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.108 mas, bmaj=9.517 mas, bpa=-17.77 degrees
! Estimated noise=0.473784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0669982 Jy
! Component: 100  -  total flux cleaned = 0.0816858 Jy
! Total flux subtracted in 100 components = 0.0816858 Jy
! Clean residual min=-0.004667 max=0.004921 Jy/beam
! Clean residual mean=-0.000003 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.0816859 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0816859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065508Jy  sigma=1.309820
! Fit after  self-cal, rms=0.065175Jy  sigma=1.305007
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.908 mas, bmaj=10.34 mas, bpa=-17.04 degrees
! Estimated noise=0.259906 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00560344 Jy
! Component: 100  -  total flux cleaned = 0.00851882 Jy
! Component: 150  -  total flux cleaned = 0.0102106 Jy
! Component: 200  -  total flux cleaned = 0.0108217 Jy
! Total flux subtracted in 200 components = 0.0108217 Jy
! Clean residual min=-0.003210 max=0.003267 Jy/beam
! Clean residual mean=-0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.0925076 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 57 components and 0.0925076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064624Jy  sigma=1.295079
! Fit after  self-cal, rms=0.064615Jy  sigma=1.294912
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.908 x 10.34 at -17.04 degrees (North through East)
! Clean map  min=-0.0031542  max=0.087124 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        1.01     KP        1.07     LA        0.95     
!   MK        1.09     NL        1.13     OV        1.08     PT        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     FD        0.98     HN        1.01     KP        1.04     
!   LA        0.94     MK        1.04     NL        1.15     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.05     KP        1.09     LA        0.92     
!   MK        1.08     NL        1.09     OV        0.89     PT        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        0.97     HN        1.02     KP        0.99     
!   LA        0.95     MK        1.04     NL        0.57     PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        0.99     KP        1.02     LA        0.91     
!   MK        1.00     NL        1.11     OV        1.01     PT        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        0.94     HN        1.00     KP        1.01     
!   LA        0.93     MK        1.02     NL        0.95     PT        1.03     
! 
! 
! Fit before self-cal, rms=0.064615Jy  sigma=1.294912
! Fit after  self-cal, rms=0.059909Jy  sigma=1.254939
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.928 mas, bmaj=10.43 mas, bpa=-17.16 degrees
! Estimated noise=0.258549 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000916433 Jy
! Component: 100  -  total flux cleaned = -0.00120952 Jy
! Component: 150  -  total flux cleaned = -0.00126986 Jy
! Component: 200  -  total flux cleaned = -0.00128863 Jy
! Total flux subtracted in 200 components = -0.00128863 Jy
! Clean residual min=-0.001794 max=0.001951 Jy/beam
! Clean residual mean=0.000005 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.091219 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.091219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059891Jy  sigma=1.254487
! Fit after  self-cal, rms=0.059975Jy  sigma=1.252940
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059975Jy  sigma=1.252940
! Fit after  self-cal, rms=0.062321Jy  sigma=1.243258
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.931 mas, bmaj=10.45 mas, bpa=-17.12 degrees
! Estimated noise=0.258595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.35554e-05 Jy
! Component: 100  -  total flux cleaned = 3.12635e-05 Jy
! Component: 150  -  total flux cleaned = 8.58955e-05 Jy
! Component: 200  -  total flux cleaned = 0.000146593 Jy
! Total flux subtracted in 200 components = 0.000146593 Jy
! Clean residual min=-0.001230 max=0.001404 Jy/beam
! Clean residual mean=0.000003 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0913656 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 78 components and 0.0913656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062309Jy  sigma=1.242906
! Fit after  self-cal, rms=0.062411Jy  sigma=1.242569
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (111, -77.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000732839 Jy
! Component: 100  -  total flux cleaned = 0.000606387 Jy
! Component: 150  -  total flux cleaned = 0.000432081 Jy
! Component: 200  -  total flux cleaned = 0.000369119 Jy
! Total flux subtracted in 200 components = 0.000369119 Jy
! Clean residual min=-0.001048 max=0.001088 Jy/beam
! Clean residual mean=0.000003 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.0917347 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 0.0917347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062382Jy  sigma=1.241636
! Fit after  self-cal, rms=0.062374Jy  sigma=1.241580
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062374Jy  sigma=1.241580
! Fit after  self-cal, rms=0.062597Jy  sigma=1.241449
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.937 mas, bmaj=10.45 mas, bpa=-17.21 degrees
! Estimated noise=0.258116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.60274e-05 Jy
! Component: 100  -  total flux cleaned = -0.000126974 Jy
! Component: 150  -  total flux cleaned = -0.000181127 Jy
! Component: 200  -  total flux cleaned = -0.00021407 Jy
! Total flux subtracted in 200 components = -0.00021407 Jy
! Clean residual min=-0.001026 max=0.001050 Jy/beam
! Clean residual mean=0.000003 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.0915206 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 114 components and 0.0915206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062588Jy  sigma=1.241157
! Fit after  self-cal, rms=0.062596Jy  sigma=1.241144
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.54672e-05 Jy
! Component: 100  -  total flux cleaned = -3.00614e-05 Jy
! Component: 150  -  total flux cleaned = -3.01524e-05 Jy
! Component: 200  -  total flux cleaned = -5.67925e-05 Jy
! Total flux subtracted in 200 components = -5.67925e-05 Jy
! Clean residual min=-0.000982 max=0.001055 Jy/beam
! Clean residual mean=0.000003 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0914638 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 125 components and 0.0914638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062591Jy  sigma=1.240974
! Fit after  self-cal, rms=0.062590Jy  sigma=1.240971
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062590Jy  sigma=1.240971
! Fit after  self-cal, rms=0.062594Jy  sigma=1.240946
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.587 mas, bmaj=11.5 mas, bpa=-17.7 degrees
! Estimated noise=0.301433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000346317 Jy
! Component: 100  -  total flux cleaned = -0.000403222 Jy
! Component: 150  -  total flux cleaned = -0.00046965 Jy
! Component: 200  -  total flux cleaned = -0.000486561 Jy
! Total flux subtracted in 200 components = -0.000486561 Jy
! Clean residual min=-0.000947 max=0.000958 Jy/beam
! Clean residual mean=0.000005 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.0909773 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 145 components and 0.0909773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062592Jy  sigma=1.240873
! Fit after  self-cal, rms=0.062593Jy  sigma=1.240864
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.88758e-05 Jy
! Component: 100  -  total flux cleaned = -6.40908e-05 Jy
! Component: 150  -  total flux cleaned = -7.14129e-05 Jy
! Component: 200  -  total flux cleaned = -8.51847e-05 Jy
! Total flux subtracted in 200 components = -8.51847e-05 Jy
! Clean residual min=-0.000930 max=0.000955 Jy/beam
! Clean residual mean=0.000005 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.0908921 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 148 components and 0.0908921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062591Jy  sigma=1.240817
! Fit after  self-cal, rms=0.062591Jy  sigma=1.240813
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.941 mas, bmaj=10.46 mas, bpa=-17.22 degrees
! Estimated noise=0.257873 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.941 x 10.46 at -17.22 degrees (North through East)
! Clean map  min=-0.00089973  max=0.086509 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.106 mas, bmaj=9.585 mas, bpa=-17.97 degrees
! Estimated noise=0.475109 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0672059 Jy
! Component: 100  -  total flux cleaned = 0.0820225 Jy
! Component: 150  -  total flux cleaned = 0.0857957 Jy
! Component: 200  -  total flux cleaned = 0.0869737 Jy
! Total flux subtracted in 200 components = 0.0869737 Jy
! Clean residual min=-0.003227 max=0.002762 Jy/beam
! Clean residual mean=0.000001 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.0869737 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0869737 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.941 mas, bmaj=10.46 mas, bpa=-17.22 degrees
! Estimated noise=0.257873 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232935 Jy
! Component: 100  -  total flux cleaned = 0.0033662 Jy
! Component: 150  -  total flux cleaned = 0.00364956 Jy
! Component: 200  -  total flux cleaned = 0.00375445 Jy
! Total flux subtracted in 200 components = 0.00375445 Jy
! Clean residual min=-0.001152 max=0.001145 Jy/beam
! Clean residual mean=0.000002 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0907281 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 51 components and 0.0907281 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.587 mas, bmaj=11.5 mas, bpa=-17.7 degrees
! Estimated noise=0.301433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025426 Jy
! Component: 100  -  total flux cleaned = 0.000206223 Jy
! Component: 150  -  total flux cleaned = 0.000168951 Jy
! Component: 200  -  total flux cleaned = 0.000153188 Jy
! Total flux subtracted in 200 components = 0.000153188 Jy
! Clean residual min=-0.001041 max=0.000979 Jy/beam
! Clean residual mean=0.000005 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0908813 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.40036e-05 Jy
! Component: 100  -  total flux cleaned = -3.86603e-05 Jy
! Component: 150  -  total flux cleaned = -6.12197e-05 Jy
! Component: 200  -  total flux cleaned = -8.21532e-05 Jy
! Total flux subtracted in 200 components = -8.21532e-05 Jy
! Clean residual min=-0.000998 max=0.000975 Jy/beam
! Clean residual mean=0.000005 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0907991 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 91 components and 0.0907991 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.941 mas, bmaj=10.46 mas, bpa=-17.22 degrees
! Estimated noise=0.257873 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.77994e-05 Jy
! Component: 100  -  total flux cleaned = 8.33314e-07 Jy
! Component: 150  -  total flux cleaned = 3.61937e-05 Jy
! Component: 200  -  total flux cleaned = 6.88079e-05 Jy
! Total flux subtracted in 200 components = 6.88079e-05 Jy
! Clean residual min=-0.001001 max=0.001049 Jy/beam
! Clean residual mean=0.000003 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0908679 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 110 components and 0.0908679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062600Jy  sigma=1.241010
! Fit after  self-cal, rms=0.062597Jy  sigma=1.240983
wmodel J0750+1919_S_a_map.mod
! Writing 110 model components to file: J0750+1919_S_a_map.mod
wobs   J0750+1919_S_a_uvs.fits
! Writing UV FITS file: J0750+1919_S_a_uvs.fits
wwins  J0750+1919_S_a_map.win
! wwins: Wrote 2 windows to J0750+1919_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000180819 Jy
! Component: 100  -  total flux cleaned = 0.000181508 Jy
! Component: 150  -  total flux cleaned = 0.000196806 Jy
! Component: 200  -  total flux cleaned = 0.000165691 Jy
! Component: 250  -  total flux cleaned = 0.000150941 Jy
! Component: 300  -  total flux cleaned = 0.000107971 Jy
! Component: 350  -  total flux cleaned = 0.000121774 Jy
! Component: 400  -  total flux cleaned = 5.46553e-05 Jy
! Component: 450  -  total flux cleaned = 5.47037e-05 Jy
! Component: 500  -  total flux cleaned = 4.20962e-05 Jy
! Component: 550  -  total flux cleaned = 4.21846e-05 Jy
! Component: 600  -  total flux cleaned = 3.00003e-05 Jy
! Component: 650  -  total flux cleaned = 1.81845e-05 Jy
! Component: 700  -  total flux cleaned = 3.00788e-05 Jy
! Component: 750  -  total flux cleaned = 4.15119e-05 Jy
! Component: 800  -  total flux cleaned = 4.16048e-05 Jy
! Component: 850  -  total flux cleaned = 5.27216e-05 Jy
! Component: 900  -  total flux cleaned = 4.16843e-05 Jy
! Component: 950  -  total flux cleaned = 5.23096e-05 Jy
! Component: 1000  -  total flux cleaned = 6.2879e-05 Jy
! Component: 1050  -  total flux cleaned = 6.30373e-05 Jy
! Component: 1100  -  total flux cleaned = 5.2991e-05 Jy
! Component: 1150  -  total flux cleaned = 5.3083e-05 Jy
! Component: 1200  -  total flux cleaned = 3.33078e-05 Jy
! Component: 1250  -  total flux cleaned = 3.32713e-05 Jy
! Component: 1300  -  total flux cleaned = 2.34999e-05 Jy
! Component: 1350  -  total flux cleaned = 8.09402e-05 Jy
! Component: 1400  -  total flux cleaned = 7.13016e-05 Jy
! Component: 1450  -  total flux cleaned = 0.000127294 Jy
! Component: 1500  -  total flux cleaned = 7.1859e-05 Jy
! Component: 1550  -  total flux cleaned = 9.943e-05 Jy
! Component: 1600  -  total flux cleaned = 9.9496e-05 Jy
! Component: 1650  -  total flux cleaned = 9.95909e-05 Jy
! Component: 1700  -  total flux cleaned = 9.0903e-05 Jy
! Component: 1750  -  total flux cleaned = 0.000178254 Jy
! Component: 1800  -  total flux cleaned = 0.000160753 Jy
! Component: 1850  -  total flux cleaned = 0.00016055 Jy
! Component: 1900  -  total flux cleaned = 0.000168948 Jy
! Component: 1950  -  total flux cleaned = 0.000185761 Jy
! Component: 2000  -  total flux cleaned = 0.000202247 Jy
! Component: 2050  -  total flux cleaned = 0.000185775 Jy
! Component: 2100  -  total flux cleaned = 0.000202192 Jy
! Component: 2150  -  total flux cleaned = 0.000202288 Jy
! Component: 2200  -  total flux cleaned = 0.000218176 Jy
! Component: 2250  -  total flux cleaned = 0.000202333 Jy
! Component: 2300  -  total flux cleaned = 0.00022583 Jy
! Component: 2350  -  total flux cleaned = 0.000210279 Jy
! Component: 2400  -  total flux cleaned = 0.000225803 Jy
! Component: 2450  -  total flux cleaned = 0.000210568 Jy
! Component: 2500  -  total flux cleaned = 0.000218206 Jy
! Component: 2550  -  total flux cleaned = 0.000233173 Jy
! Component: 2600  -  total flux cleaned = 0.000210935 Jy
! Component: 2650  -  total flux cleaned = 0.00020357 Jy
! Component: 2700  -  total flux cleaned = 0.000196197 Jy
! Component: 2750  -  total flux cleaned = 0.000203474 Jy
! Component: 2800  -  total flux cleaned = 0.000181746 Jy
! Component: 2850  -  total flux cleaned = 0.000188953 Jy
! Component: 2900  -  total flux cleaned = 0.000195899 Jy
! Component: 2950  -  total flux cleaned = 0.000167769 Jy
! Component: 3000  -  total flux cleaned = 0.000160838 Jy
! Component: 3050  -  total flux cleaned = 0.000181602 Jy
! Component: 3100  -  total flux cleaned = 0.000133424 Jy
! Component: 3150  -  total flux cleaned = 0.000140429 Jy
! Component: 3200  -  total flux cleaned = 0.000126873 Jy
! Component: 3250  -  total flux cleaned = 0.000133459 Jy
! Component: 3300  -  total flux cleaned = 0.00012003 Jy
! Component: 3350  -  total flux cleaned = 0.000106662 Jy
! Component: 3400  -  total flux cleaned = 0.000119876 Jy
! Component: 3450  -  total flux cleaned = 0.000106712 Jy
! Component: 3500  -  total flux cleaned = 8.72059e-05 Jy
! Component: 3550  -  total flux cleaned = 0.000113016 Jy
! Component: 3600  -  total flux cleaned = 0.000106544 Jy
! Component: 3650  -  total flux cleaned = 0.000112924 Jy
! Component: 3700  -  total flux cleaned = 0.000106599 Jy
! Component: 3750  -  total flux cleaned = 0.000100271 Jy
! Component: 3800  -  total flux cleaned = 0.000112769 Jy
! Component: 3850  -  total flux cleaned = 7.5519e-05 Jy
! Component: 3900  -  total flux cleaned = 7.55125e-05 Jy
! Component: 3950  -  total flux cleaned = 5.70778e-05 Jy
! Component: 4000  -  total flux cleaned = 3.26872e-05 Jy
! Component: 4050  -  total flux cleaned = 8.4383e-06 Jy
! Total flux subtracted in 4096 components = 2.65232e-05 Jy
! Clean residual min=-0.000415 max=0.000383 Jy/beam
! Clean residual mean=0.000001 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.0908945 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 424 components and 0.0908944 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0750+1919_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.941 x 10.46 at -17.22 degrees (North through East)
! Clean map  min=-0.00077535  max=0.086416 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0750+1919_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0750+1919_S_a_map.mod
! Writing 424 model components to file: /vlbi/uf001/uvm//J0750+1919_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0750+1919_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0750+1919_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0750+1919_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0750+1919_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.086416 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000114176 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.396372 0.396372 0.792745 1.58549 3.17098 6.34196 12.6839 25.3678 50.7357
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.086 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  756.863 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0750+1919_S_a_dfm.log closed on Sun Jan 13 21:03:46 2019