! Started logfile: /vlbi/uf001/uvm//J0748+2400_X_a_dfm.log on Sun Jan 13 21:03:25 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0748+2400_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0748+2400_X_a_uvm.fits ! AN table 1: 5 integrations on 28 of 28 possible baselines. ! AN table 2: 10 integrations on 45 of 45 possible baselines. ! AN table 3: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.822105 visibilities/baseline/integration-bin. ! Found source: J0748+2400 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 9372 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0748+2400_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.105327Jy sigma=21.558387 ! Fit after self-cal, rms=0.550676Jy sigma=10.848444 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7004 mas, bmaj=1.715 mas, bpa=11.21 degrees ! Estimated noise=0.582853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334404 Jy ! Component: 100 - total flux cleaned = 0.419496 Jy ! Total flux subtracted in 100 components = 0.419496 Jy ! Clean residual min=-0.019443 max=0.037171 Jy/beam ! Clean residual mean=-0.000000 rms=0.003004 Jy/beam ! Combined flux in latest and established models = 0.419496 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.419496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115318Jy sigma=2.156790 ! Fit after self-cal, rms=0.115183Jy sigma=2.154337 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424593 Jy ! Component: 100 - total flux cleaned = 0.0652281 Jy ! Total flux subtracted in 100 components = 0.0652281 Jy ! Clean residual min=-0.019066 max=0.020715 Jy/beam ! Clean residual mean=-0.000003 rms=0.002163 Jy/beam ! Combined flux in latest and established models = 0.484724 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.484724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089152Jy sigma=1.676627 ! Fit after self-cal, rms=0.088866Jy sigma=1.671335 ! Inverting map ! Added new window around map position (-2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186566 Jy ! Component: 100 - total flux cleaned = 0.0313193 Jy ! Total flux subtracted in 100 components = 0.0313193 Jy ! Clean residual min=-0.017008 max=0.016931 Jy/beam ! Clean residual mean=-0.000004 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 0.516043 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.516043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081126Jy sigma=1.528087 ! Fit after self-cal, rms=0.080889Jy sigma=1.522654 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.875 mas, bmaj=1.98 mas, bpa=10.14 degrees ! Estimated noise=0.433344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213613 Jy ! Component: 100 - total flux cleaned = 0.0311787 Jy ! Component: 150 - total flux cleaned = 0.0396861 Jy ! Component: 200 - total flux cleaned = 0.0467253 Jy ! Total flux subtracted in 200 components = 0.0467253 Jy ! Clean residual min=-0.009247 max=0.016487 Jy/beam ! Clean residual mean=-0.000024 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 0.562769 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 54 components and 0.562769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072074Jy sigma=1.362275 ! Fit after self-cal, rms=0.071756Jy sigma=1.354542 ! Inverting map ! Added new window around map position (2, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125943 Jy ! Component: 100 - total flux cleaned = 0.0190511 Jy ! Component: 150 - total flux cleaned = 0.024498 Jy ! Component: 200 - total flux cleaned = 0.0281515 Jy ! Total flux subtracted in 200 components = 0.0281515 Jy ! Clean residual min=-0.007858 max=0.009054 Jy/beam ! Clean residual mean=-0.000022 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.59092 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 72 components and 0.59092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068318Jy sigma=1.286846 ! Fit after self-cal, rms=0.068235Jy sigma=1.285352 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.875 x 1.98 at 10.14 degrees (North through East) ! Clean map min=-0.013163 max=0.44402 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 0.99 LA 1.03 ! MK 1.18 NL 0.94 OV 0.94 PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 0.94 KP 0.97 ! LA 0.99 MK 0.95 NL 1.03 OV 0.94 ! PT 0.93 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 0.97 KP 1.04 LA 1.03 ! MK 1.01 NL 1.09 OV 0.97 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 KP 0.98 LA 1.03 ! MK 1.23 NL 0.93 OV 0.95 PT 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 0.95 KP 0.99 ! LA 0.98 MK 1.02 NL 1.05 OV 0.94 ! PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 0.97 KP 1.07 LA 1.04 ! MK 1.02 NL 1.08 OV 0.96 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 KP 0.97 LA 1.03 ! MK 1.22 NL 0.95 OV 0.95 PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.94 KP 0.99 ! LA 0.99 MK 1.02 NL 1.05 OV 0.94 ! PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 HN 0.97 KP 1.03 LA 1.02 ! MK 1.00 NL 1.08 OV 0.94 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 KP 0.98 LA 1.03 ! MK 1.20 NL 0.91 OV 0.96 PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 0.96 KP 1.00 ! LA 0.99 MK 1.00 NL 1.03 OV 0.94 ! PT 0.93 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 HN 1.01 KP 1.03 LA 1.01 ! MK 1.02 NL 1.06 OV 0.97 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 KP 0.98 LA 1.02 ! MK 1.21 NL 0.91 OV 0.93 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.96 KP 0.97 ! LA 1.00 MK 1.00 NL 1.05 OV 0.94 ! PT 0.94 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 HN 0.98 KP 1.06 LA 1.02 ! MK 1.02 NL 1.11 OV 0.95 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 KP 0.98 LA 1.03 ! MK 1.21 NL 0.97 OV 0.96 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 0.94 KP 1.00 ! LA 1.00 MK 1.00 NL 1.04 OV 0.95 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 HN 1.00 KP 1.08 LA 1.01 ! MK 1.02 NL 1.08 OV 0.96 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 KP 0.97 LA 1.05 ! MK 1.18 NL 0.95 OV 0.96 PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 HN 0.95 KP 0.99 ! LA 0.98 MK 1.01 NL 1.05 OV 0.92 ! PT 0.94 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 0.98 KP 1.06 LA 1.05 ! MK 1.04 NL 1.07 OV 1.00 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 KP 1.00 LA 1.03 ! MK 1.17 NL 0.97 OV 0.95 PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.01 HN 0.96 KP 0.98 ! LA 0.98 MK 0.98 NL 1.04 OV 0.90 ! PT 0.92 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.06 KP 1.09 LA 1.03 ! MK 1.04 NL 1.07 OV 0.95 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 KP 0.97 LA 1.02 ! MK 1.15 NL 0.93 OV 0.99 PT 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 0.96 KP 1.00 ! LA 0.99 MK 0.96 NL 1.04 OV 0.94 ! PT 0.92 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 0.98 KP 1.05 LA 1.05 ! MK 1.00 NL 1.09 OV 0.96 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 KP 0.98 LA 1.03 ! MK 1.24 NL 0.94 OV 0.93 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 0.94 KP 1.00 ! LA 0.98 MK 0.95 NL 1.06 OV 0.95 ! PT 0.91 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 1.01 KP 1.08 LA 1.05 ! MK 0.99 NL 1.05 OV 0.95 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 KP 0.98 LA 1.03 ! MK 1.14 NL 0.93 OV 0.96 PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HN 0.97 KP 0.99 ! LA 0.99 MK 1.01 NL 1.03 OV 0.91 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 0.97 KP 1.09 LA 1.04 ! MK 1.03 NL 1.09 OV 0.96 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 KP 0.97 LA 1.08 ! MK 1.12 NL 0.93 OV 0.98 PT 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 0.94 KP 0.98 ! LA 0.98 MK 0.99 NL 1.04 OV 0.92 ! PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 HN 0.98 KP 1.06 LA 1.02 ! MK 1.04 NL 1.08 OV 0.94 PT 0.94 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.068235Jy sigma=1.285352 ! Fit after self-cal, rms=0.059923Jy sigma=1.120938 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8752 mas, bmaj=1.989 mas, bpa=10.25 degrees ! Estimated noise=0.432595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000871727 Jy ! Component: 100 - total flux cleaned = 0.00142887 Jy ! Component: 150 - total flux cleaned = 0.00215193 Jy ! Component: 200 - total flux cleaned = 0.00277705 Jy ! Total flux subtracted in 200 components = 0.00277705 Jy ! Clean residual min=-0.004690 max=0.003591 Jy/beam ! Clean residual mean=-0.000004 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.593697 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.593697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058878Jy sigma=1.101237 ! Fit after self-cal, rms=0.058823Jy sigma=1.099655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058823Jy sigma=1.099655 ! Fit after self-cal, rms=0.058010Jy sigma=1.084234 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8754 mas, bmaj=1.99 mas, bpa=10.24 degrees ! Estimated noise=0.431876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123189 Jy ! Component: 100 - total flux cleaned = -0.000675132 Jy ! Component: 150 - total flux cleaned = -0.000479878 Jy ! Component: 200 - total flux cleaned = -0.000388876 Jy ! Total flux subtracted in 200 components = -0.000388876 Jy ! Clean residual min=-0.003727 max=0.002938 Jy/beam ! Clean residual mean=-0.000004 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.593308 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 104 components and 0.593308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057593Jy sigma=1.076658 ! Fit after self-cal, rms=0.057572Jy sigma=1.076234 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338162 Jy ! Component: 100 - total flux cleaned = 0.000256118 Jy ! Component: 150 - total flux cleaned = 0.00032694 Jy ! Component: 200 - total flux cleaned = 0.00018868 Jy ! Total flux subtracted in 200 components = 0.00018868 Jy ! Clean residual min=-0.003371 max=0.002643 Jy/beam ! Clean residual mean=-0.000004 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.593497 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 114 components and 0.593497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057386Jy sigma=1.072799 ! Fit after self-cal, rms=0.057377Jy sigma=1.072665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057377Jy sigma=1.072665 ! Fit after self-cal, rms=0.057267Jy sigma=1.071116 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8749 mas, bmaj=1.99 mas, bpa=10.22 degrees ! Estimated noise=0.431502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169925 Jy ! Component: 100 - total flux cleaned = -0.00185315 Jy ! Component: 150 - total flux cleaned = -0.00185043 Jy ! Component: 200 - total flux cleaned = -0.0019682 Jy ! Total flux subtracted in 200 components = -0.0019682 Jy ! Clean residual min=-0.003038 max=0.002606 Jy/beam ! Clean residual mean=-0.000004 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.591529 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 0.591529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057076Jy sigma=1.067657 ! Fit after self-cal, rms=0.057070Jy sigma=1.067558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.06507e-05 Jy ! Component: 100 - total flux cleaned = 9.38001e-05 Jy ! Component: 150 - total flux cleaned = 4.41026e-05 Jy ! Component: 200 - total flux cleaned = 4.49866e-05 Jy ! Total flux subtracted in 200 components = 4.49866e-05 Jy ! Clean residual min=-0.002835 max=0.002529 Jy/beam ! Clean residual mean=-0.000004 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.591574 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 128 components and 0.591574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056984Jy sigma=1.065896 ! Fit after self-cal, rms=0.056980Jy sigma=1.065846 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056980Jy sigma=1.065846 ! Fit after self-cal, rms=0.056925Jy sigma=1.064946 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.036 mas, bmaj=2.898 mas, bpa=-0.4848 degrees ! Estimated noise=0.568176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104772 Jy ! Component: 100 - total flux cleaned = -0.00151344 Jy ! Component: 150 - total flux cleaned = -0.00181701 Jy ! Component: 200 - total flux cleaned = -0.00201407 Jy ! Total flux subtracted in 200 components = -0.00201407 Jy ! Clean residual min=-0.002396 max=0.002991 Jy/beam ! Clean residual mean=-0.000009 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.58956 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.58956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056855Jy sigma=1.063447 ! Fit after self-cal, rms=0.056848Jy sigma=1.063324 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.23596e-05 Jy ! Component: 100 - total flux cleaned = -0.000133233 Jy ! Component: 150 - total flux cleaned = -0.00020734 Jy ! Component: 200 - total flux cleaned = -0.000275636 Jy ! Total flux subtracted in 200 components = -0.000275636 Jy ! Clean residual min=-0.002283 max=0.002885 Jy/beam ! Clean residual mean=-0.000009 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.589284 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 153 components and 0.589284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056844Jy sigma=1.063149 ! Fit after self-cal, rms=0.056841Jy sigma=1.063121 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8744 mas, bmaj=1.991 mas, bpa=10.21 degrees ! Estimated noise=0.431318 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8744 x 1.991 at 10.21 degrees (North through East) ! Clean map min=-0.00603 max=0.4427 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.699 mas, bmaj=1.72 mas, bpa=11.19 degrees ! Estimated noise=0.580152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332438 Jy ! Component: 100 - total flux cleaned = 0.420016 Jy ! Component: 150 - total flux cleaned = 0.463865 Jy ! Component: 200 - total flux cleaned = 0.487523 Jy ! Total flux subtracted in 200 components = 0.487523 Jy ! Clean residual min=-0.008425 max=0.012294 Jy/beam ! Clean residual mean=0.000003 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.487523 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.487523 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8744 mas, bmaj=1.991 mas, bpa=10.21 degrees ! Estimated noise=0.431318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257898 Jy ! Component: 100 - total flux cleaned = 0.0426709 Jy ! Component: 150 - total flux cleaned = 0.0545426 Jy ! Component: 200 - total flux cleaned = 0.0634188 Jy ! Total flux subtracted in 200 components = 0.0634188 Jy ! Clean residual min=-0.004678 max=0.007649 Jy/beam ! Clean residual mean=-0.000008 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.550942 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 44 components and 0.550942 Jy ! Inverting map ! Added new window around map position (5.2, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762653 Jy ! Component: 100 - total flux cleaned = 0.0133417 Jy ! Component: 150 - total flux cleaned = 0.0175791 Jy ! Component: 200 - total flux cleaned = 0.0207226 Jy ! Total flux subtracted in 200 components = 0.0207226 Jy ! Clean residual min=-0.003428 max=0.004275 Jy/beam ! Clean residual mean=-0.000005 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.571665 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 76 components and 0.571665 Jy ! Inverting map ! Added new window around map position (3.4, -11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385114 Jy ! Component: 100 - total flux cleaned = 0.00618046 Jy ! Component: 150 - total flux cleaned = 0.00788097 Jy ! Component: 200 - total flux cleaned = 0.00928888 Jy ! Total flux subtracted in 200 components = 0.00928888 Jy ! Clean residual min=-0.003186 max=0.003261 Jy/beam ! Clean residual mean=-0.000004 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.580954 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 103 components and 0.580953 Jy ! Inverting map ! Added new window around map position (-5.2, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228266 Jy ! Component: 100 - total flux cleaned = 0.00330326 Jy ! Component: 150 - total flux cleaned = 0.00404339 Jy ! Component: 200 - total flux cleaned = 0.00486927 Jy ! Total flux subtracted in 200 components = 0.00486927 Jy ! Clean residual min=-0.002944 max=0.002505 Jy/beam ! Clean residual mean=-0.000004 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.585823 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 134 components and 0.585823 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.036 mas, bmaj=2.898 mas, bpa=-0.4848 degrees ! Estimated noise=0.568176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028697 Jy ! Component: 100 - total flux cleaned = 0.00412146 Jy ! Component: 150 - total flux cleaned = 0.00478939 Jy ! Component: 200 - total flux cleaned = 0.00518906 Jy ! Total flux subtracted in 200 components = 0.00518906 Jy ! Clean residual min=-0.002834 max=0.002501 Jy/beam ! Clean residual mean=-0.000007 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.591012 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252967 Jy ! Component: 100 - total flux cleaned = 0.000392698 Jy ! Component: 150 - total flux cleaned = 0.000435943 Jy ! Component: 200 - total flux cleaned = 0.00051757 Jy ! Total flux subtracted in 200 components = 0.00051757 Jy ! Clean residual min=-0.002482 max=0.002502 Jy/beam ! Clean residual mean=-0.000006 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.591529 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 186 components and 0.591529 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8744 mas, bmaj=1.991 mas, bpa=10.21 degrees ! Estimated noise=0.431318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000551332 Jy ! Component: 100 - total flux cleaned = -0.000439658 Jy ! Component: 150 - total flux cleaned = -0.000282173 Jy ! Component: 200 - total flux cleaned = -0.000236057 Jy ! Total flux subtracted in 200 components = -0.000236057 Jy ! Clean residual min=-0.002271 max=0.001972 Jy/beam ! Clean residual mean=-0.000003 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.591293 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 212 components and 0.591293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056581Jy sigma=1.058086 ! Fit after self-cal, rms=0.056537Jy sigma=1.057248 wmodel J0748+2400_X_a_map.mod ! Writing 212 model components to file: J0748+2400_X_a_map.mod wobs J0748+2400_X_a_uvs.fits ! Writing UV FITS file: J0748+2400_X_a_uvs.fits wwins J0748+2400_X_a_map.win ! wwins: Wrote 8 windows to J0748+2400_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242788 Jy ! Component: 100 - total flux cleaned = -0.000314879 Jy ! Component: 150 - total flux cleaned = -0.000350694 Jy ! Component: 200 - total flux cleaned = -0.000485198 Jy ! Component: 250 - total flux cleaned = -0.000744832 Jy ! Component: 300 - total flux cleaned = -0.00106155 Jy ! Component: 350 - total flux cleaned = -0.00124748 Jy ! Component: 400 - total flux cleaned = -0.00140002 Jy ! Component: 450 - total flux cleaned = -0.00154966 Jy ! Component: 500 - total flux cleaned = -0.00166757 Jy ! Component: 550 - total flux cleaned = -0.00178449 Jy ! Component: 600 - total flux cleaned = -0.00189961 Jy ! Component: 650 - total flux cleaned = -0.00204121 Jy ! Component: 700 - total flux cleaned = -0.00212549 Jy ! Component: 750 - total flux cleaned = -0.00223669 Jy ! Component: 800 - total flux cleaned = -0.00229161 Jy ! Component: 850 - total flux cleaned = -0.0024275 Jy ! Component: 900 - total flux cleaned = -0.00240071 Jy ! Component: 950 - total flux cleaned = -0.00258752 Jy ! Component: 1000 - total flux cleaned = -0.0027193 Jy ! Component: 1050 - total flux cleaned = -0.00271943 Jy ! Component: 1100 - total flux cleaned = -0.00287537 Jy ! Component: 1150 - total flux cleaned = -0.00290124 Jy ! Component: 1200 - total flux cleaned = -0.00305426 Jy ! Component: 1250 - total flux cleaned = -0.00313075 Jy ! Component: 1300 - total flux cleaned = -0.00323123 Jy ! Component: 1350 - total flux cleaned = -0.003455 Jy ! Component: 1400 - total flux cleaned = -0.00357781 Jy ! Component: 1450 - total flux cleaned = -0.00360229 Jy ! Component: 1500 - total flux cleaned = -0.00367528 Jy ! Component: 1550 - total flux cleaned = -0.00379582 Jy ! Component: 1600 - total flux cleaned = -0.00389128 Jy ! Component: 1650 - total flux cleaned = -0.00398643 Jy ! Component: 1700 - total flux cleaned = -0.00419837 Jy ! Component: 1750 - total flux cleaned = -0.00424503 Jy ! Component: 1800 - total flux cleaned = -0.00431485 Jy ! Component: 1850 - total flux cleaned = -0.00452222 Jy ! Component: 1900 - total flux cleaned = -0.00463679 Jy ! Component: 1950 - total flux cleaned = -0.00472743 Jy ! Component: 2000 - total flux cleaned = -0.00477246 Jy ! Component: 2050 - total flux cleaned = -0.004907 Jy ! Component: 2100 - total flux cleaned = -0.00497392 Jy ! Component: 2150 - total flux cleaned = -0.0049961 Jy ! Component: 2200 - total flux cleaned = -0.00512803 Jy ! Component: 2250 - total flux cleaned = -0.00519352 Jy ! Component: 2300 - total flux cleaned = -0.00525896 Jy ! Component: 2350 - total flux cleaned = -0.00536725 Jy ! Component: 2400 - total flux cleaned = -0.00545331 Jy ! Component: 2450 - total flux cleaned = -0.0054535 Jy ! Component: 2500 - total flux cleaned = -0.00549583 Jy ! Component: 2550 - total flux cleaned = -0.00547474 Jy ! Component: 2600 - total flux cleaned = -0.00572716 Jy ! Component: 2650 - total flux cleaned = -0.00574789 Jy ! Component: 2700 - total flux cleaned = -0.00572726 Jy ! Component: 2750 - total flux cleaned = -0.00589273 Jy ! Component: 2800 - total flux cleaned = -0.00589271 Jy ! Component: 2850 - total flux cleaned = -0.00595395 Jy ! Component: 2900 - total flux cleaned = -0.00599462 Jy ! Component: 2950 - total flux cleaned = -0.00605543 Jy ! Component: 3000 - total flux cleaned = -0.00605566 Jy ! Component: 3050 - total flux cleaned = -0.00607563 Jy ! Component: 3100 - total flux cleaned = -0.0062549 Jy ! Component: 3150 - total flux cleaned = -0.00621528 Jy ! Component: 3200 - total flux cleaned = -0.00631375 Jy ! Component: 3250 - total flux cleaned = -0.00635268 Jy ! Component: 3300 - total flux cleaned = -0.00641133 Jy ! Component: 3350 - total flux cleaned = -0.00650835 Jy ! Component: 3400 - total flux cleaned = -0.00652757 Jy ! Component: 3450 - total flux cleaned = -0.00652754 Jy ! Component: 3500 - total flux cleaned = -0.00660398 Jy ! Component: 3550 - total flux cleaned = -0.00654684 Jy ! Component: 3600 - total flux cleaned = -0.00675518 Jy ! Component: 3650 - total flux cleaned = -0.00671735 Jy ! Component: 3700 - total flux cleaned = -0.00681112 Jy ! Component: 3750 - total flux cleaned = -0.00681125 Jy ! Component: 3800 - total flux cleaned = -0.0068669 Jy ! Component: 3850 - total flux cleaned = -0.00695935 Jy ! Component: 3900 - total flux cleaned = -0.00694093 Jy ! Component: 3950 - total flux cleaned = -0.00695921 Jy ! Component: 4000 - total flux cleaned = -0.006941 Jy ! Component: 4050 - total flux cleaned = -0.0069955 Jy ! Total flux subtracted in 4096 components = -0.00695924 Jy ! Clean residual min=-0.001404 max=0.001208 Jy/beam ! Clean residual mean=-0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.584334 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 554 components and 0.584334 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0748+2400_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8744 x 1.991 at 10.21 degrees (North through East) ! Clean map min=-0.0030538 max=0.44324 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0748+2400_X_a_map.fits wmodel /vlbi/uf001/uvm//J0748+2400_X_a_map.mod ! Writing 554 model components to file: /vlbi/uf001/uvm//J0748+2400_X_a_map.mod wobs /vlbi/uf001/uvm//J0748+2400_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0748+2400_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0748+2400_X_a_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uvm//J0748+2400_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.443242 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000317214 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.2147 0.2147 0.429401 0.858801 1.7176 3.43521 6.87041 13.7408 27.4816 54.9633 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.443 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1397.3 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0748+2400_X_a_dfm.log closed on Sun Jan 13 21:03:30 2019