! Started logfile: /vlbi/uf001/uva//J0747-3310_S_dfm.log on Sun Jan 13 23:37:39 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0747-3310_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0747-3310_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.875926 visibilities/baseline/integration-bin.
! Found source: J0747-3310
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5676 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0747-3310_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.102171Jy  sigma=14.688793
! Fit after  self-cal, rms=0.598217Jy  sigma=7.996383
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=6.381 mas, bpa=-4.329 degrees
! Estimated noise=1.00098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.299322 Jy
! Component: 100  -  total flux cleaned = 0.429785 Jy
! Total flux subtracted in 100 components = 0.429785 Jy
! Clean residual min=-0.024063 max=0.068213 Jy/beam
! Clean residual mean=-0.000064 rms=0.008542 Jy/beam
! Combined flux in latest and established models = 0.429785 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.429785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.190702Jy  sigma=2.514124
! Fit after  self-cal, rms=0.190557Jy  sigma=2.512685
! Inverting map 
! Added new window around map position (-3, -8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0786212 Jy
! Component: 100  -  total flux cleaned = 0.12799 Jy
! Total flux subtracted in 100 components = 0.12799 Jy
! Clean residual min=-0.014170 max=0.036802 Jy/beam
! Clean residual mean=-0.000057 rms=0.004741 Jy/beam
! Combined flux in latest and established models = 0.557775 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 49 components and 0.557775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132332Jy  sigma=1.703513
! Fit after  self-cal, rms=0.132143Jy  sigma=1.700211
! Inverting map 
! Added new window around map position (3.5, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357782 Jy
! Component: 100  -  total flux cleaned = 0.0589124 Jy
! Total flux subtracted in 100 components = 0.0589124 Jy
! Clean residual min=-0.012494 max=0.016271 Jy/beam
! Clean residual mean=-0.000055 rms=0.003488 Jy/beam
! Combined flux in latest and established models = 0.616688 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 85 components and 0.616688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115657Jy  sigma=1.473863
! Fit after  self-cal, rms=0.115564Jy  sigma=1.473014
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.071 mas, bmaj=7.806 mas, bpa=-3.307 degrees
! Estimated noise=0.713937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0275549 Jy
! Component: 100  -  total flux cleaned = 0.0439503 Jy
! Component: 150  -  total flux cleaned = 0.054148 Jy
! Component: 200  -  total flux cleaned = 0.0605103 Jy
! Total flux subtracted in 200 components = 0.0605103 Jy
! Clean residual min=-0.014969 max=0.014403 Jy/beam
! Clean residual mean=-0.000123 rms=0.003810 Jy/beam
! Combined flux in latest and established models = 0.677198 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 115 components and 0.677198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108237Jy  sigma=1.381001
! Fit after  self-cal, rms=0.108150Jy  sigma=1.380189
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.071 x 7.806 at -3.307 degrees (North through East)
! Clean map  min=-0.014345  max=0.37767 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.13     HN        1.13     KP        1.02     
!   LA        0.91     MK        1.06     NL        1.10     OV        1.02     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.16     KP        1.02     
!   LA        0.90     MK        1.03     NL        1.06     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.16     KP        0.99     
!   LA        0.91     MK        0.97     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.90     
! 
! 
! Fit before self-cal, rms=0.108150Jy  sigma=1.380189
! Fit after  self-cal, rms=0.102839Jy  sigma=1.275482
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.076 mas, bmaj=7.733 mas, bpa=-2.49 degrees
! Estimated noise=0.715074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0035743 Jy
! Component: 100  -  total flux cleaned = -0.00441463 Jy
! Component: 150  -  total flux cleaned = -0.00510677 Jy
! Component: 200  -  total flux cleaned = -0.00569229 Jy
! Total flux subtracted in 200 components = -0.00569229 Jy
! Clean residual min=-0.011413 max=0.013494 Jy/beam
! Clean residual mean=0.000031 rms=0.002864 Jy/beam
! Combined flux in latest and established models = 0.671506 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 132 components and 0.671506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101971Jy  sigma=1.265043
! Fit after  self-cal, rms=0.102003Jy  sigma=1.264649
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102003Jy  sigma=1.264649
! Fit after  self-cal, rms=0.099396Jy  sigma=1.194579
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.086 mas, bmaj=7.798 mas, bpa=-2.408 degrees
! Estimated noise=0.715903 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000487166 Jy
! Component: 100  -  total flux cleaned = -0.000918313 Jy
! Component: 150  -  total flux cleaned = -0.00118493 Jy
! Component: 200  -  total flux cleaned = -0.00126484 Jy
! Total flux subtracted in 200 components = -0.00126484 Jy
! Clean residual min=-0.006003 max=0.011235 Jy/beam
! Clean residual mean=-0.000002 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 0.670241 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 141 components and 0.670241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099155Jy  sigma=1.191775
! Fit after  self-cal, rms=0.099157Jy  sigma=1.191454
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.5, 17.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113056 Jy
! Component: 100  -  total flux cleaned = 0.0170848 Jy
! Component: 150  -  total flux cleaned = 0.0203409 Jy
! Component: 200  -  total flux cleaned = 0.0226147 Jy
! Total flux subtracted in 200 components = 0.0226147 Jy
! Clean residual min=-0.004969 max=0.004883 Jy/beam
! Clean residual mean=0.000019 rms=0.001375 Jy/beam
! Combined flux in latest and established models = 0.692856 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 172 components and 0.692856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098028Jy  sigma=1.171838
! Fit after  self-cal, rms=0.097958Jy  sigma=1.171306
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097958Jy  sigma=1.171306
! Fit after  self-cal, rms=0.098270Jy  sigma=1.169632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.092 mas, bmaj=7.833 mas, bpa=-2.406 degrees
! Estimated noise=0.715958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369327 Jy
! Component: 100  -  total flux cleaned = -3.63967e-05 Jy
! Component: 150  -  total flux cleaned = 0.000317128 Jy
! Component: 200  -  total flux cleaned = 0.0005688 Jy
! Total flux subtracted in 200 components = 0.0005688 Jy
! Clean residual min=-0.004760 max=0.004715 Jy/beam
! Clean residual mean=0.000012 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.693425 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 190 components and 0.693425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098116Jy  sigma=1.167765
! Fit after  self-cal, rms=0.098106Jy  sigma=1.167669
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.40144e-05 Jy
! Component: 100  -  total flux cleaned = 0.000529039 Jy
! Component: 150  -  total flux cleaned = 0.000728525 Jy
! Component: 200  -  total flux cleaned = 0.000913165 Jy
! Total flux subtracted in 200 components = 0.000913165 Jy
! Clean residual min=-0.004667 max=0.004682 Jy/beam
! Clean residual mean=0.000012 rms=0.001250 Jy/beam
! Combined flux in latest and established models = 0.694338 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 197 components and 0.694338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098045Jy  sigma=1.166981
! Fit after  self-cal, rms=0.098041Jy  sigma=1.166931
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098041Jy  sigma=1.166931
! Fit after  self-cal, rms=0.098331Jy  sigma=1.166450
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.04 mas, bmaj=21.13 mas, bpa=4.146 degrees
! Estimated noise=0.920651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108381 Jy
! Component: 100  -  total flux cleaned = 0.00127845 Jy
! Component: 150  -  total flux cleaned = 0.00128099 Jy
! Component: 200  -  total flux cleaned = 0.00123833 Jy
! Total flux subtracted in 200 components = 0.00123833 Jy
! Clean residual min=-0.006863 max=0.006408 Jy/beam
! Clean residual mean=0.000029 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 0.695576 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 208 components and 0.695576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098312Jy  sigma=1.166096
! Fit after  self-cal, rms=0.098303Jy  sigma=1.166006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012445 Jy
! Component: 100  -  total flux cleaned = 0.000125722 Jy
! Component: 150  -  total flux cleaned = 0.000161403 Jy
! Component: 200  -  total flux cleaned = 0.000160294 Jy
! Total flux subtracted in 200 components = 0.000160294 Jy
! Clean residual min=-0.007000 max=0.006403 Jy/beam
! Clean residual mean=0.000029 rms=0.001890 Jy/beam
! Combined flux in latest and established models = 0.695736 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 217 components and 0.695736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098301Jy  sigma=1.165998
! Fit after  self-cal, rms=0.098292Jy  sigma=1.165959
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=7.852 mas, bpa=-2.373 degrees
! Estimated noise=0.716182 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.095 x 7.852 at -2.373 degrees (North through East)
! Clean map  min=-0.009375  max=0.38467 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.55 mas, bmaj=6.397 mas, bpa=-3.247 degrees
! Estimated noise=1.01838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.303601 Jy
! Component: 100  -  total flux cleaned = 0.434961 Jy
! Component: 150  -  total flux cleaned = 0.511225 Jy
! Component: 200  -  total flux cleaned = 0.558707 Jy
! Total flux subtracted in 200 components = 0.558707 Jy
! Clean residual min=-0.011284 max=0.026492 Jy/beam
! Clean residual mean=-0.000019 rms=0.003748 Jy/beam
! Combined flux in latest and established models = 0.558707 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.558707 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=7.852 mas, bpa=-2.373 degrees
! Estimated noise=0.716182 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0461462 Jy
! Component: 100  -  total flux cleaned = 0.071206 Jy
! Component: 150  -  total flux cleaned = 0.0870603 Jy
! Component: 200  -  total flux cleaned = 0.0984378 Jy
! Total flux subtracted in 200 components = 0.0984378 Jy
! Clean residual min=-0.006364 max=0.008877 Jy/beam
! Clean residual mean=-0.000010 rms=0.001847 Jy/beam
! Combined flux in latest and established models = 0.657145 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 119 components and 0.657145 Jy
! Inverting map 
! Added new window around map position (11, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00963649 Jy
! Component: 100  -  total flux cleaned = 0.0165 Jy
! Component: 150  -  total flux cleaned = 0.0218287 Jy
! Component: 200  -  total flux cleaned = 0.0260363 Jy
! Total flux subtracted in 200 components = 0.0260363 Jy
! Clean residual min=-0.005321 max=0.004479 Jy/beam
! Clean residual mean=0.000007 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.683181 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 162 components and 0.683181 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.04 mas, bmaj=21.13 mas, bpa=4.146 degrees
! Estimated noise=0.920651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0058485 Jy
! Component: 100  -  total flux cleaned = 0.00952831 Jy
! Component: 150  -  total flux cleaned = 0.0118973 Jy
! Component: 200  -  total flux cleaned = 0.0124619 Jy
! Total flux subtracted in 200 components = 0.0124619 Jy
! Clean residual min=-0.007083 max=0.006236 Jy/beam
! Clean residual mean=0.000030 rms=0.001875 Jy/beam
! Combined flux in latest and established models = 0.695643 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421175 Jy
! Component: 100  -  total flux cleaned = 0.000789332 Jy
! Component: 150  -  total flux cleaned = 0.00110772 Jy
! Component: 200  -  total flux cleaned = 0.00138683 Jy
! Total flux subtracted in 200 components = 0.00138683 Jy
! Clean residual min=-0.007115 max=0.006128 Jy/beam
! Clean residual mean=0.000032 rms=0.001858 Jy/beam
! Combined flux in latest and established models = 0.69703 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 190 components and 0.69703 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=7.852 mas, bpa=-2.373 degrees
! Estimated noise=0.716182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000774747 Jy
! Component: 100  -  total flux cleaned = -0.000999015 Jy
! Component: 150  -  total flux cleaned = -0.00106653 Jy
! Component: 200  -  total flux cleaned = -0.00112801 Jy
! Total flux subtracted in 200 components = -0.00112801 Jy
! Clean residual min=-0.004915 max=0.004540 Jy/beam
! Clean residual mean=0.000014 rms=0.001187 Jy/beam
! Combined flux in latest and established models = 0.695902 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 207 components and 0.695902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098276Jy  sigma=1.165543
! Fit after  self-cal, rms=0.098247Jy  sigma=1.165155
wmodel J0747-3310_S_map.mod
! Writing 207 model components to file: J0747-3310_S_map.mod
wobs   J0747-3310_S_uvs.fits
! Writing UV FITS file: J0747-3310_S_uvs.fits
wwins  J0747-3310_S_map.win
! wwins: Wrote 5 windows to J0747-3310_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00148948 Jy
! Component: 100  -  total flux cleaned = -0.00285287 Jy
! Component: 150  -  total flux cleaned = -0.00398457 Jy
! Component: 200  -  total flux cleaned = -0.0049126 Jy
! Component: 250  -  total flux cleaned = -0.0055242 Jy
! Component: 300  -  total flux cleaned = -0.00598105 Jy
! Component: 350  -  total flux cleaned = -0.00635779 Jy
! Component: 400  -  total flux cleaned = -0.00654057 Jy
! Component: 450  -  total flux cleaned = -0.00689048 Jy
! Component: 500  -  total flux cleaned = -0.0070599 Jy
! Component: 550  -  total flux cleaned = -0.00727857 Jy
! Component: 600  -  total flux cleaned = -0.00743634 Jy
! Component: 650  -  total flux cleaned = -0.00764141 Jy
! Component: 700  -  total flux cleaned = -0.00769115 Jy
! Component: 750  -  total flux cleaned = -0.0077396 Jy
! Component: 800  -  total flux cleaned = -0.00774009 Jy
! Component: 850  -  total flux cleaned = -0.00787766 Jy
! Component: 900  -  total flux cleaned = -0.00778748 Jy
! Component: 950  -  total flux cleaned = -0.00787568 Jy
! Component: 1000  -  total flux cleaned = -0.00791872 Jy
! Component: 1050  -  total flux cleaned = -0.00800335 Jy
! Component: 1100  -  total flux cleaned = -0.00804463 Jy
! Component: 1150  -  total flux cleaned = -0.00800354 Jy
! Component: 1200  -  total flux cleaned = -0.00796428 Jy
! Component: 1250  -  total flux cleaned = -0.00788697 Jy
! Component: 1300  -  total flux cleaned = -0.00796484 Jy
! Component: 1350  -  total flux cleaned = -0.00796518 Jy
! Component: 1400  -  total flux cleaned = -0.0079278 Jy
! Component: 1450  -  total flux cleaned = -0.00800148 Jy
! Component: 1500  -  total flux cleaned = -0.00792939 Jy
! Component: 1550  -  total flux cleaned = -0.0080347 Jy
! Component: 1600  -  total flux cleaned = -0.00785995 Jy
! Component: 1650  -  total flux cleaned = -0.00782515 Jy
! Component: 1700  -  total flux cleaned = -0.00765628 Jy
! Component: 1750  -  total flux cleaned = -0.00759031 Jy
! Component: 1800  -  total flux cleaned = -0.00762361 Jy
! Component: 1850  -  total flux cleaned = -0.00755825 Jy
! Component: 1900  -  total flux cleaned = -0.00742972 Jy
! Component: 1950  -  total flux cleaned = -0.00739798 Jy
! Component: 2000  -  total flux cleaned = -0.00724228 Jy
! Component: 2050  -  total flux cleaned = -0.00721094 Jy
! Component: 2100  -  total flux cleaned = -0.00708981 Jy
! Component: 2150  -  total flux cleaned = -0.00702984 Jy
! Component: 2200  -  total flux cleaned = -0.00691168 Jy
! Component: 2250  -  total flux cleaned = -0.00699944 Jy
! Component: 2300  -  total flux cleaned = -0.00688381 Jy
! Component: 2350  -  total flux cleaned = -0.00679846 Jy
! Component: 2400  -  total flux cleaned = -0.00679916 Jy
! Component: 2450  -  total flux cleaned = -0.00679987 Jy
! Component: 2500  -  total flux cleaned = -0.00671715 Jy
! Component: 2550  -  total flux cleaned = -0.00666237 Jy
! Component: 2600  -  total flux cleaned = -0.00655374 Jy
! Component: 2650  -  total flux cleaned = -0.0065537 Jy
! Component: 2700  -  total flux cleaned = -0.00650112 Jy
! Component: 2750  -  total flux cleaned = -0.00639652 Jy
! Component: 2800  -  total flux cleaned = -0.00644839 Jy
! Component: 2850  -  total flux cleaned = -0.00637164 Jy
! Component: 2900  -  total flux cleaned = -0.00634623 Jy
! Component: 2950  -  total flux cleaned = -0.0063212 Jy
! Component: 3000  -  total flux cleaned = -0.00629649 Jy
! Component: 3050  -  total flux cleaned = -0.00629638 Jy
! Component: 3100  -  total flux cleaned = -0.00627224 Jy
! Component: 3150  -  total flux cleaned = -0.00632048 Jy
! Component: 3200  -  total flux cleaned = -0.00629689 Jy
! Component: 3250  -  total flux cleaned = -0.00625007 Jy
! Component: 3300  -  total flux cleaned = -0.0062736 Jy
! Component: 3350  -  total flux cleaned = -0.00631965 Jy
! Component: 3400  -  total flux cleaned = -0.00629651 Jy
! Component: 3450  -  total flux cleaned = -0.00627382 Jy
! Component: 3500  -  total flux cleaned = -0.00634115 Jy
! Component: 3550  -  total flux cleaned = -0.00627444 Jy
! Component: 3600  -  total flux cleaned = -0.00634048 Jy
! Component: 3650  -  total flux cleaned = -0.00631826 Jy
! Component: 3700  -  total flux cleaned = -0.0063613 Jy
! Component: 3750  -  total flux cleaned = -0.00631872 Jy
! Component: 3800  -  total flux cleaned = -0.0063613 Jy
! Component: 3850  -  total flux cleaned = -0.00646647 Jy
! Component: 3900  -  total flux cleaned = -0.00654981 Jy
! Component: 3950  -  total flux cleaned = -0.00659111 Jy
! Component: 4000  -  total flux cleaned = -0.00661178 Jy
! Component: 4050  -  total flux cleaned = -0.00671341 Jy
! Total flux subtracted in 4096 components = -0.00675386 Jy
! Clean residual min=-0.001281 max=0.001116 Jy/beam
! Clean residual mean=0.000000 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.689148 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 491 components and 0.689148 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0747-3310_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.095 x 7.852 at -2.373 degrees (North through East)
! Clean map  min=-0.0030547  max=0.39496 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0747-3310_S_map.fits
wmodel /vlbi/uf001/uva//J0747-3310_S_map.mod
! Writing 491 model components to file: /vlbi/uf001/uva//J0747-3310_S_map.mod
wobs   /vlbi/uf001/uva//J0747-3310_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0747-3310_S_uvs.fits
wwins  /vlbi/uf001/uva//J0747-3310_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0747-3310_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.394962 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000379829 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.288506 0.288506 0.577011 1.15402 2.30804 4.61609 9.23218 18.4644 36.9287 73.8574
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.394 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1039.84 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0747-3310_S_dfm.log closed on Sun Jan 13 23:37:44 2019