! Started logfile: /vlbi/uf001/uva//J0745-0044_S_b_dfm.log on Sun Jan 13 23:36:56 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0745-0044_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0745-0044_S_b_uva.fits
! AN table 1: 5 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.838095 visibilities/baseline/integration-bin.
! Found source: J0745-0044
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 264 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0745-0044_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.679901Jy  sigma=16.187870
! Fit after  self-cal, rms=0.534534Jy  sigma=5.117501
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.119 mas, bmaj=20.48 mas, bpa=-18.18 degrees
! Estimated noise=6.30676 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.16491 Jy
! Component: 100  -  total flux cleaned = 1.41972 Jy
! Total flux subtracted in 100 components = 1.41972 Jy
! Clean residual min=-0.053629 max=0.078354 Jy/beam
! Clean residual mean=0.000002 rms=0.021174 Jy/beam
! Combined flux in latest and established models = 1.41972 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.41972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.185045Jy  sigma=1.731392
! Fit after  self-cal, rms=0.185046Jy  sigma=1.731140
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.926 mas, bmaj=20.79 mas, bpa=-18.64 degrees
! Estimated noise=5.25999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0933985 Jy
! Component: 100  -  total flux cleaned = 0.145199 Jy
! Component: 150  -  total flux cleaned = 0.157843 Jy
! Component: 200  -  total flux cleaned = 0.163661 Jy
! Total flux subtracted in 200 components = 0.163661 Jy
! Clean residual min=-0.050520 max=0.042224 Jy/beam
! Clean residual mean=0.000029 rms=0.014475 Jy/beam
! Combined flux in latest and established models = 1.58338 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 45 components and 1.58338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114251Jy  sigma=1.139534
! Fit after  self-cal, rms=0.114057Jy  sigma=1.138084
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.926 x 20.79 at -18.64 degrees (North through East)
! Clean map  min=-0.05079  max=1.4911 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        1.00     KP        1.03     LA        0.94     
!   NL        1.02     OV        1.02     PT        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     HN        1.02     KP        1.03     LA        0.94     
!   NL        1.07     OV        0.95     PT        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        1.00     KP        1.02     LA        0.93     
!   NL        1.07     OV        1.02     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.114057Jy  sigma=1.138084
! Fit after  self-cal, rms=0.060740Jy  sigma=0.577160
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.925 mas, bmaj=20.32 mas, bpa=-17.86 degrees
! Estimated noise=5.26355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0127122 Jy
! Component: 100  -  total flux cleaned = -0.0184668 Jy
! Component: 150  -  total flux cleaned = -0.0201133 Jy
! Component: 200  -  total flux cleaned = -0.021191 Jy
! Total flux subtracted in 200 components = -0.021191 Jy
! Clean residual min=-0.014137 max=0.012271 Jy/beam
! Clean residual mean=0.000048 rms=0.004202 Jy/beam
! Combined flux in latest and established models = 1.56219 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 83 components and 1.56219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058202Jy  sigma=0.547101
! Fit after  self-cal, rms=0.058152Jy  sigma=0.546805
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058152Jy  sigma=0.546805
! Fit after  self-cal, rms=0.056994Jy  sigma=0.535860
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.935 mas, bmaj=20.29 mas, bpa=-17.81 degrees
! Estimated noise=5.26367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00730667 Jy
! Component: 100  -  total flux cleaned = -0.00872833 Jy
! Component: 150  -  total flux cleaned = -0.0095343 Jy
! Component: 200  -  total flux cleaned = -0.0102778 Jy
! Total flux subtracted in 200 components = -0.0102778 Jy
! Clean residual min=-0.012530 max=0.009789 Jy/beam
! Clean residual mean=0.000035 rms=0.003570 Jy/beam
! Combined flux in latest and established models = 1.55191 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 102 components and 1.55191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056024Jy  sigma=0.524494
! Fit after  self-cal, rms=0.056009Jy  sigma=0.524466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000578204 Jy
! Component: 100  -  total flux cleaned = -0.000912671 Jy
! Component: 150  -  total flux cleaned = -0.000972602 Jy
! Component: 200  -  total flux cleaned = -0.00102951 Jy
! Total flux subtracted in 200 components = -0.00102951 Jy
! Clean residual min=-0.012451 max=0.009862 Jy/beam
! Clean residual mean=0.000035 rms=0.003527 Jy/beam
! Combined flux in latest and established models = 1.55088 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 115 components and 1.55088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055857Jy  sigma=0.523370
! Fit after  self-cal, rms=0.055857Jy  sigma=0.523358
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055857Jy  sigma=0.523358
! Fit after  self-cal, rms=0.055258Jy  sigma=0.518135
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.941 mas, bmaj=20.28 mas, bpa=-17.79 degrees
! Estimated noise=5.26344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00485571 Jy
! Component: 100  -  total flux cleaned = -0.00531375 Jy
! Component: 150  -  total flux cleaned = -0.00554843 Jy
! Component: 200  -  total flux cleaned = -0.00575549 Jy
! Total flux subtracted in 200 components = -0.00575549 Jy
! Clean residual min=-0.011402 max=0.009318 Jy/beam
! Clean residual mean=0.000028 rms=0.003207 Jy/beam
! Combined flux in latest and established models = 1.54513 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 130 components and 1.54513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054807Jy  sigma=0.512913
! Fit after  self-cal, rms=0.054798Jy  sigma=0.512896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000329197 Jy
! Component: 100  -  total flux cleaned = -0.000326968 Jy
! Component: 150  -  total flux cleaned = -0.000381953 Jy
! Component: 200  -  total flux cleaned = -0.000432399 Jy
! Total flux subtracted in 200 components = -0.000432399 Jy
! Clean residual min=-0.011229 max=0.009207 Jy/beam
! Clean residual mean=0.000028 rms=0.003173 Jy/beam
! Combined flux in latest and established models = 1.5447 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 138 components and 1.5447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054699Jy  sigma=0.511925
! Fit after  self-cal, rms=0.054695Jy  sigma=0.511915
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054695Jy  sigma=0.511915
! Fit after  self-cal, rms=0.054407Jy  sigma=0.509344
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.154 mas, bmaj=20.35 mas, bpa=-18.22 degrees
! Estimated noise=5.44556 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00236572 Jy
! Component: 100  -  total flux cleaned = -0.00237388 Jy
! Component: 150  -  total flux cleaned = -0.00269543 Jy
! Component: 200  -  total flux cleaned = -0.00288524 Jy
! Total flux subtracted in 200 components = -0.00288524 Jy
! Clean residual min=-0.010662 max=0.008878 Jy/beam
! Clean residual mean=0.000030 rms=0.003121 Jy/beam
! Combined flux in latest and established models = 1.54181 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 151 components and 1.54181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054181Jy  sigma=0.506913
! Fit after  self-cal, rms=0.054175Jy  sigma=0.506897
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000217293 Jy
! Component: 100  -  total flux cleaned = -0.000377529 Jy
! Component: 150  -  total flux cleaned = -0.000451714 Jy
! Component: 200  -  total flux cleaned = -0.000487014 Jy
! Total flux subtracted in 200 components = -0.000487014 Jy
! Clean residual min=-0.010528 max=0.008870 Jy/beam
! Clean residual mean=0.000030 rms=0.003104 Jy/beam
! Combined flux in latest and established models = 1.54132 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 161 components and 1.54133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054126Jy  sigma=0.506402
! Fit after  self-cal, rms=0.054123Jy  sigma=0.506388
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=7.942 mas, bmaj=20.26 mas, bpa=-17.77 degrees
! Estimated noise=5.2623 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.942 x 20.26 at -17.77 degrees (North through East)
! Clean map  min=-0.010384  max=1.4773 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054123Jy  sigma=0.506388
! Fit after  self-cal, rms=0.052312Jy  sigma=0.477324
! Inverting map and beam 
! Estimated beam: bmin=7.944 mas, bmaj=20.26 mas, bpa=-17.76 degrees
! Estimated noise=5.26147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00318873 Jy
! Component: 100  -  total flux cleaned = -0.00408182 Jy
! Component: 150  -  total flux cleaned = -0.00401966 Jy
! Component: 200  -  total flux cleaned = -0.00396162 Jy
! Total flux subtracted in 200 components = -0.00396162 Jy
! Clean residual min=-0.009816 max=0.009115 Jy/beam
! Clean residual mean=0.000021 rms=0.002852 Jy/beam
! Combined flux in latest and established models = 1.53736 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 177 components and 1.53736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052074Jy  sigma=0.474870
! Fit after  self-cal, rms=0.052072Jy  sigma=0.474862
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.16501e-05 Jy
! Component: 100  -  total flux cleaned = 3.66875e-05 Jy
! Component: 150  -  total flux cleaned = -8.38121e-06 Jy
! Component: 200  -  total flux cleaned = -7.34162e-06 Jy
! Total flux subtracted in 200 components = -7.34162e-06 Jy
! Clean residual min=-0.009739 max=0.008932 Jy/beam
! Clean residual mean=0.000021 rms=0.002823 Jy/beam
! Combined flux in latest and established models = 1.53736 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 183 components and 1.53736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052008Jy  sigma=0.474047
! Fit after  self-cal, rms=0.052011Jy  sigma=0.474040
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052011Jy  sigma=0.474040
! Fit after  self-cal, rms=0.051880Jy  sigma=0.472877
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.196 mas, bmaj=20.23 mas, bpa=-18.01 degrees
! Estimated noise=6.26185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.15586 Jy
! Component: 100  -  total flux cleaned = 1.40805 Jy
! Component: 150  -  total flux cleaned = 1.4777 Jy
! Component: 200  -  total flux cleaned = 1.51198 Jy
! Total flux subtracted in 200 components = 1.51198 Jy
! Clean residual min=-0.015596 max=0.018102 Jy/beam
! Clean residual mean=0.000026 rms=0.005540 Jy/beam
! Combined flux in latest and established models = 1.51198 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.51198 Jy
! Inverting map and beam 
! Estimated beam: bmin=7.944 mas, bmaj=20.25 mas, bpa=-17.74 degrees
! Estimated noise=5.25983 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137979 Jy
! Component: 100  -  total flux cleaned = 0.0207469 Jy
! Component: 150  -  total flux cleaned = 0.0222689 Jy
! Component: 200  -  total flux cleaned = 0.0236758 Jy
! Total flux subtracted in 200 components = 0.0236758 Jy
! Clean residual min=-0.010347 max=0.010451 Jy/beam
! Clean residual mean=0.000020 rms=0.003350 Jy/beam
! Combined flux in latest and established models = 1.53565 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 63 components and 1.53565 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.157 mas, bmaj=20.34 mas, bpa=-18.18 degrees
! Estimated noise=5.44264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000802793 Jy
! Component: 100  -  total flux cleaned = 0.000678868 Jy
! Component: 150  -  total flux cleaned = 0.000422187 Jy
! Component: 200  -  total flux cleaned = 0.000110719 Jy
! Total flux subtracted in 200 components = 0.000110719 Jy
! Clean residual min=-0.009711 max=0.009525 Jy/beam
! Clean residual mean=0.000023 rms=0.003134 Jy/beam
! Combined flux in latest and established models = 1.53576 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000249308 Jy
! Component: 100  -  total flux cleaned = -0.000460009 Jy
! Component: 150  -  total flux cleaned = -0.000635869 Jy
! Component: 200  -  total flux cleaned = -0.000738479 Jy
! Total flux subtracted in 200 components = -0.000738479 Jy
! Clean residual min=-0.009460 max=0.009143 Jy/beam
! Clean residual mean=0.000022 rms=0.003083 Jy/beam
! Combined flux in latest and established models = 1.53503 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 117 components and 1.53503 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=7.944 mas, bmaj=20.25 mas, bpa=-17.74 degrees
! Estimated noise=5.25983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000301948 Jy
! Component: 100  -  total flux cleaned = -0.00057398 Jy
! Component: 150  -  total flux cleaned = -0.000761989 Jy
! Component: 200  -  total flux cleaned = -0.000994609 Jy
! Total flux subtracted in 200 components = -0.000994609 Jy
! Clean residual min=-0.009328 max=0.009321 Jy/beam
! Clean residual mean=0.000017 rms=0.002936 Jy/beam
! Combined flux in latest and established models = 1.53403 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 134 components and 1.53403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052314Jy  sigma=0.476645
! Fit after  self-cal, rms=0.052327Jy  sigma=0.476519
wmodel J0745-0044_S_b_map.mod
! Writing 134 model components to file: J0745-0044_S_b_map.mod
wobs   J0745-0044_S_b_uvs.fits
! Writing UV FITS file: J0745-0044_S_b_uvs.fits
wwins  J0745-0044_S_b_map.win
! wwins: Wrote 1 windows to J0745-0044_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00116308 Jy
! Component: 100  -  total flux cleaned = -0.00264695 Jy
! Component: 150  -  total flux cleaned = -0.00318995 Jy
! Component: 200  -  total flux cleaned = -0.00307736 Jy
! Component: 250  -  total flux cleaned = -0.0029733 Jy
! Component: 300  -  total flux cleaned = -0.00277062 Jy
! Component: 350  -  total flux cleaned = -0.00277214 Jy
! Component: 400  -  total flux cleaned = -0.00294054 Jy
! Component: 450  -  total flux cleaned = -0.00325615 Jy
! Component: 500  -  total flux cleaned = -0.00362376 Jy
! Component: 550  -  total flux cleaned = -0.00390209 Jy
! Component: 600  -  total flux cleaned = -0.00430068 Jy
! Component: 650  -  total flux cleaned = -0.0047433 Jy
! Component: 700  -  total flux cleaned = -0.00492199 Jy
! Component: 750  -  total flux cleaned = -0.00526893 Jy
! Component: 800  -  total flux cleaned = -0.00526785 Jy
! Component: 850  -  total flux cleaned = -0.00558723 Jy
! Component: 900  -  total flux cleaned = -0.00573766 Jy
! Component: 950  -  total flux cleaned = -0.0058858 Jy
! Component: 1000  -  total flux cleaned = -0.00612417 Jy
! Component: 1050  -  total flux cleaned = -0.00607959 Jy
! Component: 1100  -  total flux cleaned = -0.00608045 Jy
! Component: 1150  -  total flux cleaned = -0.00603847 Jy
! Component: 1200  -  total flux cleaned = -0.00612457 Jy
! Component: 1250  -  total flux cleaned = -0.00620569 Jy
! Component: 1300  -  total flux cleaned = -0.00620552 Jy
! Component: 1350  -  total flux cleaned = -0.00624461 Jy
! Component: 1400  -  total flux cleaned = -0.00628205 Jy
! Component: 1450  -  total flux cleaned = -0.00631893 Jy
! Component: 1500  -  total flux cleaned = -0.006463 Jy
! Component: 1550  -  total flux cleaned = -0.00656905 Jy
! Component: 1600  -  total flux cleaned = -0.0066721 Jy
! Component: 1650  -  total flux cleaned = -0.00673925 Jy
! Component: 1700  -  total flux cleaned = -0.0067721 Jy
! Component: 1750  -  total flux cleaned = -0.00680469 Jy
! Component: 1800  -  total flux cleaned = -0.00690026 Jy
! Component: 1850  -  total flux cleaned = -0.00696314 Jy
! Component: 1900  -  total flux cleaned = -0.00711759 Jy
! Component: 1950  -  total flux cleaned = -0.00711728 Jy
! Component: 2000  -  total flux cleaned = -0.00714737 Jy
! Component: 2050  -  total flux cleaned = -0.00717714 Jy
! Component: 2100  -  total flux cleaned = -0.00726528 Jy
! Component: 2150  -  total flux cleaned = -0.00723571 Jy
! Component: 2200  -  total flux cleaned = -0.00729292 Jy
! Component: 2250  -  total flux cleaned = -0.00737814 Jy
! Component: 2300  -  total flux cleaned = -0.00732176 Jy
! Component: 2350  -  total flux cleaned = -0.00734992 Jy
! Component: 2400  -  total flux cleaned = -0.00734981 Jy
! Component: 2450  -  total flux cleaned = -0.00729395 Jy
! Component: 2500  -  total flux cleaned = -0.00723816 Jy
! Component: 2550  -  total flux cleaned = -0.00721024 Jy
! Component: 2600  -  total flux cleaned = -0.00721037 Jy
! Component: 2650  -  total flux cleaned = -0.00715443 Jy
! Component: 2700  -  total flux cleaned = -0.00712649 Jy
! Component: 2750  -  total flux cleaned = -0.0071265 Jy
! Component: 2800  -  total flux cleaned = -0.00704201 Jy
! Component: 2850  -  total flux cleaned = -0.00698551 Jy
! Component: 2900  -  total flux cleaned = -0.00692845 Jy
! Component: 2950  -  total flux cleaned = -0.00692844 Jy
! Component: 3000  -  total flux cleaned = -0.00684291 Jy
! Component: 3050  -  total flux cleaned = -0.00684285 Jy
! Component: 3100  -  total flux cleaned = -0.00681397 Jy
! Component: 3150  -  total flux cleaned = -0.00681398 Jy
! Component: 3200  -  total flux cleaned = -0.00678504 Jy
! Component: 3250  -  total flux cleaned = -0.00678508 Jy
! Component: 3300  -  total flux cleaned = -0.00681457 Jy
! Component: 3350  -  total flux cleaned = -0.00684425 Jy
! Component: 3400  -  total flux cleaned = -0.00681451 Jy
! Component: 3450  -  total flux cleaned = -0.00684448 Jy
! Component: 3500  -  total flux cleaned = -0.00678395 Jy
! Component: 3550  -  total flux cleaned = -0.00687483 Jy
! Component: 3600  -  total flux cleaned = -0.00690563 Jy
! Component: 3650  -  total flux cleaned = -0.00696715 Jy
! Component: 3700  -  total flux cleaned = -0.00693617 Jy
! Component: 3750  -  total flux cleaned = -0.00699876 Jy
! Component: 3800  -  total flux cleaned = -0.00706216 Jy
! Component: 3850  -  total flux cleaned = -0.00706222 Jy
! Component: 3900  -  total flux cleaned = -0.00703013 Jy
! Component: 3950  -  total flux cleaned = -0.00709447 Jy
! Component: 4000  -  total flux cleaned = -0.0071601 Jy
! Component: 4050  -  total flux cleaned = -0.00725964 Jy
! Total flux subtracted in 4096 components = -0.00729292 Jy
! Clean residual min=-0.001906 max=0.001886 Jy/beam
! Clean residual mean=0.000004 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 1.52674 Jy
keep
! Adding 394 model components to the UV plane model.
! The established model now contains 528 components and 1.52674 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0745-0044_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 7.944 x 20.25 at -17.74 degrees (North through East)
! Clean map  min=-0.0080574  max=1.4774 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0745-0044_S_b_map.fits
wmodel /vlbi/uf001/uva//J0745-0044_S_b_map.mod
! Writing 528 model components to file: /vlbi/uf001/uva//J0745-0044_S_b_map.mod
wobs   /vlbi/uf001/uva//J0745-0044_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0745-0044_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0745-0044_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0745-0044_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.47744 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000623535 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.126611 0.126611 0.253222 0.506445 1.01289 2.02578 4.05156 8.10311 16.2062 32.4124 64.8249
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.477 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2369.46 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0745-0044_S_b_dfm.log closed on Sun Jan 13 23:37:00 2019