! Started logfile: /vlbi/uf001/uva//J0745+3142_X_dfm.log on Sun Jan 13 23:36:37 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0745+3142_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0745+3142_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905263 visibilities/baseline/integration-bin. ! Found source: J0745+3142 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 27864 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0745+3142_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.042661Jy sigma=25.103348 ! Fit after self-cal, rms=0.751531Jy sigma=18.223282 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7041 mas, bmaj=1.347 mas, bpa=-0.1822 degrees ! Estimated noise=0.365266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173475 Jy ! Component: 100 - total flux cleaned = 0.237549 Jy ! Total flux subtracted in 100 components = 0.237549 Jy ! Clean residual min=-0.017491 max=0.061531 Jy/beam ! Clean residual mean=0.000004 rms=0.004407 Jy/beam ! Combined flux in latest and established models = 0.237549 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.237549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133401Jy sigma=3.079414 ! Fit after self-cal, rms=0.133314Jy sigma=3.077364 ! Inverting map ! Added new window around map position (2.2, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562876 Jy ! Component: 100 - total flux cleaned = 0.092469 Jy ! Total flux subtracted in 100 components = 0.092469 Jy ! Clean residual min=-0.011109 max=0.022587 Jy/beam ! Clean residual mean=0.000003 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 0.330018 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.330018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094426Jy sigma=2.169379 ! Fit after self-cal, rms=0.093343Jy sigma=2.142246 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281875 Jy ! Component: 100 - total flux cleaned = 0.0493236 Jy ! Total flux subtracted in 100 components = 0.0493236 Jy ! Clean residual min=-0.008194 max=0.018411 Jy/beam ! Clean residual mean=0.000002 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.379342 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.379342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077203Jy sigma=1.772737 ! Fit after self-cal, rms=0.077020Jy sigma=1.768501 ! Inverting map ! Added new window around map position (1, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187168 Jy ! Component: 100 - total flux cleaned = 0.0321163 Jy ! Total flux subtracted in 100 components = 0.0321163 Jy ! Clean residual min=-0.006339 max=0.008112 Jy/beam ! Clean residual mean=0.000001 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.411458 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.411458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068632Jy sigma=1.575821 ! Fit after self-cal, rms=0.068526Jy sigma=1.573117 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8861 mas, bmaj=1.662 mas, bpa=0.197 degrees ! Estimated noise=0.185227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184341 Jy ! Component: 100 - total flux cleaned = 0.0316657 Jy ! Component: 150 - total flux cleaned = 0.0417471 Jy ! Component: 200 - total flux cleaned = 0.049515 Jy ! Total flux subtracted in 200 components = 0.049515 Jy ! Clean residual min=-0.006565 max=0.009776 Jy/beam ! Clean residual mean=-0.000003 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.460973 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 60 components and 0.460973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061046Jy sigma=1.412114 ! Fit after self-cal, rms=0.060968Jy sigma=1.410126 ! Inverting map ! Added new window around map position (2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104052 Jy ! Component: 100 - total flux cleaned = 0.0169229 Jy ! Component: 150 - total flux cleaned = 0.0221021 Jy ! Component: 200 - total flux cleaned = 0.0263473 Jy ! Total flux subtracted in 200 components = 0.0263473 Jy ! Clean residual min=-0.005561 max=0.007427 Jy/beam ! Clean residual mean=-0.000001 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.48732 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 0.48732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058650Jy sigma=1.357948 ! Fit after self-cal, rms=0.058488Jy sigma=1.354345 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8861 x 1.662 at 0.197 degrees (North through East) ! Clean map min=-0.0055599 max=0.25184 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.95 KP 0.97 ! LA 0.99 MK 1.02 NL 1.07 OV 0.93 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.94 KP 0.98 ! LA 0.98 MK 1.03 NL 1.08 OV 0.93 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.95 KP 0.96 ! LA 0.98 MK 1.02 NL 1.08 OV 0.93 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.94 KP 0.97 ! LA 1.00 MK 1.04 NL 1.07 OV 0.93 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.95 KP 0.98 ! LA 0.99 MK 1.02 NL 1.08 OV 0.93 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.96 KP 0.98 ! LA 1.00 MK 1.02 NL 1.08 OV 0.92 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.95 KP 0.98 ! LA 0.99 MK 1.04 NL 1.08 OV 0.93 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 0.95 KP 0.99 ! LA 1.00 MK 1.05 NL 1.08 OV 0.93 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.97 KP 0.99 ! LA 0.99 MK 1.03 NL 1.08 OV 0.94 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.96 KP 0.99 ! LA 1.00 MK 1.04 NL 1.09 OV 0.94 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.97 KP 0.98 ! LA 1.00 MK 1.03 NL 1.09 OV 0.94 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.96 KP 0.99 ! LA 1.00 MK 1.04 NL 1.08 OV 0.95 ! PT 0.95 SC 0.98 ! ! ! Fit before self-cal, rms=0.058488Jy sigma=1.354345 ! Fit after self-cal, rms=0.054092Jy sigma=1.255171 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8862 mas, bmaj=1.672 mas, bpa=0.6126 degrees ! Estimated noise=0.184462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146986 Jy ! Component: 100 - total flux cleaned = -0.0021274 Jy ! Component: 150 - total flux cleaned = -0.00240092 Jy ! Component: 200 - total flux cleaned = -0.00255042 Jy ! Total flux subtracted in 200 components = -0.00255042 Jy ! Clean residual min=-0.002307 max=0.003718 Jy/beam ! Clean residual mean=-0.000000 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.48477 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 94 components and 0.48477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053714Jy sigma=1.245244 ! Fit after self-cal, rms=0.053714Jy sigma=1.244775 ! Inverting map ! Added new window around map position (-1.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325909 Jy ! Component: 100 - total flux cleaned = 0.00414033 Jy ! Component: 150 - total flux cleaned = 0.00448614 Jy ! Component: 200 - total flux cleaned = 0.00473287 Jy ! Total flux subtracted in 200 components = 0.00473287 Jy ! Clean residual min=-0.002098 max=0.002693 Jy/beam ! Clean residual mean=0.000000 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.489503 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.489503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053463Jy sigma=1.238377 ! Fit after self-cal, rms=0.053443Jy sigma=1.237954 ! Inverting map ! Added new window around map position (-3.6, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218003 Jy ! Component: 100 - total flux cleaned = 0.00277232 Jy ! Component: 150 - total flux cleaned = 0.00311414 Jy ! Component: 200 - total flux cleaned = 0.00352889 Jy ! Total flux subtracted in 200 components = 0.00352889 Jy ! Clean residual min=-0.001867 max=0.001745 Jy/beam ! Clean residual mean=0.000001 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.493032 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 128 components and 0.493032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053283Jy sigma=1.233936 ! Fit after self-cal, rms=0.053272Jy sigma=1.233739 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053272Jy sigma=1.233739 ! Fit after self-cal, rms=0.052873Jy sigma=1.225994 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8848 mas, bmaj=1.67 mas, bpa=0.6772 degrees ! Estimated noise=0.184202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160207 Jy ! Component: 100 - total flux cleaned = -0.0015502 Jy ! Component: 150 - total flux cleaned = -0.00122539 Jy ! Component: 200 - total flux cleaned = -0.000890242 Jy ! Total flux subtracted in 200 components = -0.000890242 Jy ! Clean residual min=-0.001282 max=0.001431 Jy/beam ! Clean residual mean=-0.000000 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.492142 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 145 components and 0.492141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052771Jy sigma=1.223415 ! Fit after self-cal, rms=0.052766Jy sigma=1.223271 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684547 Jy ! Component: 100 - total flux cleaned = 0.000851464 Jy ! Component: 150 - total flux cleaned = 0.0011196 Jy ! Component: 200 - total flux cleaned = 0.00136686 Jy ! Total flux subtracted in 200 components = 0.00136686 Jy ! Clean residual min=-0.001260 max=0.001226 Jy/beam ! Clean residual mean=-0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.493508 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 160 components and 0.493508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052702Jy sigma=1.221788 ! Fit after self-cal, rms=0.052700Jy sigma=1.221742 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052700Jy sigma=1.221742 ! Fit after self-cal, rms=0.052655Jy sigma=1.221352 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8841 mas, bmaj=1.67 mas, bpa=0.6914 degrees ! Estimated noise=0.18409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111402 Jy ! Component: 100 - total flux cleaned = -0.000895095 Jy ! Component: 150 - total flux cleaned = -0.000661185 Jy ! Component: 200 - total flux cleaned = -0.000476769 Jy ! Total flux subtracted in 200 components = -0.000476769 Jy ! Clean residual min=-0.001120 max=0.001223 Jy/beam ! Clean residual mean=-0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.493031 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 174 components and 0.493032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052609Jy sigma=1.220238 ! Fit after self-cal, rms=0.052608Jy sigma=1.220195 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.2, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010199 Jy ! Component: 100 - total flux cleaned = 0.00126449 Jy ! Component: 150 - total flux cleaned = 0.00148807 Jy ! Component: 200 - total flux cleaned = 0.00167129 Jy ! Total flux subtracted in 200 components = 0.00167129 Jy ! Clean residual min=-0.001080 max=0.001140 Jy/beam ! Clean residual mean=-0.000000 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.494703 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 182 components and 0.494703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052573Jy sigma=1.219279 ! Fit after self-cal, rms=0.052572Jy sigma=1.219256 ! Inverting map ! Added new window around map position (-0.4, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010982 Jy ! Component: 100 - total flux cleaned = 0.00154683 Jy ! Component: 150 - total flux cleaned = 0.00177172 Jy ! Component: 200 - total flux cleaned = 0.00186488 Jy ! Total flux subtracted in 200 components = 0.00186488 Jy ! Clean residual min=-0.001005 max=0.001003 Jy/beam ! Clean residual mean=0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.496568 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 202 components and 0.496568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052539Jy sigma=1.218516 ! Fit after self-cal, rms=0.052538Jy sigma=1.218491 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052538Jy sigma=1.218491 ! Fit after self-cal, rms=0.052505Jy sigma=1.218270 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.006 mas, bmaj=2.661 mas, bpa=2.255 degrees ! Estimated noise=0.241311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355457 Jy ! Component: 100 - total flux cleaned = 3.29201e-05 Jy ! Component: 150 - total flux cleaned = 0.000362442 Jy ! Component: 200 - total flux cleaned = 0.000583467 Jy ! Total flux subtracted in 200 components = 0.000583467 Jy ! Clean residual min=-0.001054 max=0.000985 Jy/beam ! Clean residual mean=0.000000 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.497151 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 226 components and 0.497151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052488Jy sigma=1.217951 ! Fit after self-cal, rms=0.052487Jy sigma=1.217912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.36542e-05 Jy ! Component: 100 - total flux cleaned = 0.000245884 Jy ! Component: 150 - total flux cleaned = 0.000425011 Jy ! Component: 200 - total flux cleaned = 0.000523118 Jy ! Total flux subtracted in 200 components = 0.000523118 Jy ! Clean residual min=-0.001014 max=0.000970 Jy/beam ! Clean residual mean=0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.497674 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 241 components and 0.497674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052481Jy sigma=1.217805 ! Fit after self-cal, rms=0.052480Jy sigma=1.217792 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8837 mas, bmaj=1.671 mas, bpa=0.6984 degrees ! Estimated noise=0.183979 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8837 x 1.671 at 0.6984 degrees (North through East) ! Clean map min=-0.00096781 max=0.25041 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7011 mas, bmaj=1.352 mas, bpa=0.4977 degrees ! Estimated noise=0.362755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172199 Jy ! Component: 100 - total flux cleaned = 0.244707 Jy ! Component: 150 - total flux cleaned = 0.294678 Jy ! Component: 200 - total flux cleaned = 0.331752 Jy ! Total flux subtracted in 200 components = 0.331752 Jy ! Clean residual min=-0.008694 max=0.021315 Jy/beam ! Clean residual mean=0.000002 rms=0.002349 Jy/beam ! Combined flux in latest and established models = 0.331752 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.331752 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8837 mas, bmaj=1.671 mas, bpa=0.6984 degrees ! Estimated noise=0.183979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410708 Jy ! Component: 100 - total flux cleaned = 0.0683558 Jy ! Component: 150 - total flux cleaned = 0.087296 Jy ! Component: 200 - total flux cleaned = 0.100793 Jy ! Total flux subtracted in 200 components = 0.100793 Jy ! Clean residual min=-0.003334 max=0.007674 Jy/beam ! Clean residual mean=-0.000004 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.432545 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.432545 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00996466 Jy ! Component: 100 - total flux cleaned = 0.0175341 Jy ! Component: 150 - total flux cleaned = 0.0234561 Jy ! Component: 200 - total flux cleaned = 0.0282069 Jy ! Total flux subtracted in 200 components = 0.0282069 Jy ! Clean residual min=-0.001888 max=0.002840 Jy/beam ! Clean residual mean=-0.000003 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.460752 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 67 components and 0.460751 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389625 Jy ! Component: 100 - total flux cleaned = 0.00718175 Jy ! Component: 150 - total flux cleaned = 0.00999823 Jy ! Component: 200 - total flux cleaned = 0.0124551 Jy ! Total flux subtracted in 200 components = 0.0124551 Jy ! Clean residual min=-0.001491 max=0.001713 Jy/beam ! Clean residual mean=-0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.473207 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 97 components and 0.473206 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.006 mas, bmaj=2.661 mas, bpa=2.255 degrees ! Estimated noise=0.241311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004272 Jy ! Component: 100 - total flux cleaned = 0.00747681 Jy ! Component: 150 - total flux cleaned = 0.0100452 Jy ! Component: 200 - total flux cleaned = 0.0121748 Jy ! Total flux subtracted in 200 components = 0.0121748 Jy ! Clean residual min=-0.001430 max=0.001527 Jy/beam ! Clean residual mean=-0.000003 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.485381 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180961 Jy ! Component: 100 - total flux cleaned = 0.00336001 Jy ! Component: 150 - total flux cleaned = 0.0046935 Jy ! Component: 200 - total flux cleaned = 0.00584834 Jy ! Total flux subtracted in 200 components = 0.00584834 Jy ! Clean residual min=-0.001147 max=0.001070 Jy/beam ! Clean residual mean=-0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.49123 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 184 components and 0.49123 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8837 mas, bmaj=1.671 mas, bpa=0.6984 degrees ! Estimated noise=0.183979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107844 Jy ! Component: 100 - total flux cleaned = 0.00176683 Jy ! Component: 150 - total flux cleaned = 0.00222543 Jy ! Component: 200 - total flux cleaned = 0.00267964 Jy ! Total flux subtracted in 200 components = 0.00267964 Jy ! Clean residual min=-0.001028 max=0.000984 Jy/beam ! Clean residual mean=-0.000000 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.493909 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 214 components and 0.493909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052512Jy sigma=1.218461 ! Fit after self-cal, rms=0.052500Jy sigma=1.218180 wmodel J0745+3142_X_map.mod ! Writing 214 model components to file: J0745+3142_X_map.mod wobs J0745+3142_X_uvs.fits ! Writing UV FITS file: J0745+3142_X_uvs.fits wwins J0745+3142_X_map.win ! wwins: Wrote 9 windows to J0745+3142_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035764 Jy ! Component: 100 - total flux cleaned = -0.000581906 Jy ! Component: 150 - total flux cleaned = -0.000779313 Jy ! Component: 200 - total flux cleaned = -0.00101792 Jy ! Component: 250 - total flux cleaned = -0.00123442 Jy ! Component: 300 - total flux cleaned = -0.00143045 Jy ! Component: 350 - total flux cleaned = -0.00159241 Jy ! Component: 400 - total flux cleaned = -0.00175105 Jy ! Component: 450 - total flux cleaned = -0.0018783 Jy ! Component: 500 - total flux cleaned = -0.00203104 Jy ! Component: 550 - total flux cleaned = -0.00208566 Jy ! Component: 600 - total flux cleaned = -0.00218002 Jy ! Component: 650 - total flux cleaned = -0.00227271 Jy ! Component: 700 - total flux cleaned = -0.00235095 Jy ! Component: 750 - total flux cleaned = -0.00244096 Jy ! Component: 800 - total flux cleaned = -0.00250468 Jy ! Component: 850 - total flux cleaned = -0.0026175 Jy ! Component: 900 - total flux cleaned = -0.00265468 Jy ! Component: 950 - total flux cleaned = -0.00277715 Jy ! Component: 1000 - total flux cleaned = -0.00278917 Jy ! Component: 1050 - total flux cleaned = -0.00282506 Jy ! Component: 1100 - total flux cleaned = -0.00293205 Jy ! Component: 1150 - total flux cleaned = -0.0030026 Jy ! Component: 1200 - total flux cleaned = -0.0030375 Jy ! Component: 1250 - total flux cleaned = -0.00308363 Jy ! Component: 1300 - total flux cleaned = -0.00315218 Jy ! Component: 1350 - total flux cleaned = -0.00320894 Jy ! Component: 1400 - total flux cleaned = -0.00323138 Jy ! Component: 1450 - total flux cleaned = -0.00329801 Jy ! Component: 1500 - total flux cleaned = -0.00332013 Jy ! Component: 1550 - total flux cleaned = -0.00338561 Jy ! Component: 1600 - total flux cleaned = -0.00338547 Jy ! Component: 1650 - total flux cleaned = -0.00342834 Jy ! Component: 1700 - total flux cleaned = -0.00341772 Jy ! Component: 1750 - total flux cleaned = -0.0034915 Jy ! Component: 1800 - total flux cleaned = -0.00351235 Jy ! Component: 1850 - total flux cleaned = -0.0035331 Jy ! Component: 1900 - total flux cleaned = -0.00353291 Jy ! Component: 1950 - total flux cleaned = -0.00355333 Jy ! Component: 2000 - total flux cleaned = -0.00356355 Jy ! Component: 2050 - total flux cleaned = -0.00354354 Jy ! Component: 2100 - total flux cleaned = -0.00360344 Jy ! Component: 2150 - total flux cleaned = -0.00363308 Jy ! Component: 2200 - total flux cleaned = -0.00362329 Jy ! Component: 2250 - total flux cleaned = -0.00368184 Jy ! Component: 2300 - total flux cleaned = -0.0036528 Jy ! Component: 2350 - total flux cleaned = -0.00371063 Jy ! Component: 2400 - total flux cleaned = -0.00372034 Jy ! Component: 2450 - total flux cleaned = -0.00372994 Jy ! Component: 2500 - total flux cleaned = -0.00376778 Jy ! Component: 2550 - total flux cleaned = -0.00378661 Jy ! Component: 2600 - total flux cleaned = -0.00384255 Jy ! Component: 2650 - total flux cleaned = -0.00386102 Jy ! Component: 2700 - total flux cleaned = -0.00387942 Jy ! Component: 2750 - total flux cleaned = -0.00395257 Jy ! Component: 2800 - total flux cleaned = -0.00395251 Jy ! Component: 2850 - total flux cleaned = -0.00398872 Jy ! Component: 2900 - total flux cleaned = -0.00404264 Jy ! Component: 2950 - total flux cleaned = -0.00406925 Jy ! Component: 3000 - total flux cleaned = -0.00408703 Jy ! Component: 3050 - total flux cleaned = -0.00410475 Jy ! Component: 3100 - total flux cleaned = -0.00420109 Jy ! Component: 3150 - total flux cleaned = -0.00421851 Jy ! Component: 3200 - total flux cleaned = -0.00423588 Jy ! Component: 3250 - total flux cleaned = -0.00427904 Jy ! Component: 3300 - total flux cleaned = -0.00431326 Jy ! Component: 3350 - total flux cleaned = -0.00432178 Jy ! Component: 3400 - total flux cleaned = -0.00436405 Jy ! Component: 3450 - total flux cleaned = -0.00438924 Jy ! Component: 3500 - total flux cleaned = -0.00443115 Jy ! Component: 3550 - total flux cleaned = -0.00447279 Jy ! Component: 3600 - total flux cleaned = -0.00451422 Jy ! Component: 3650 - total flux cleaned = -0.00449775 Jy ! Component: 3700 - total flux cleaned = -0.00451409 Jy ! Component: 3750 - total flux cleaned = -0.00450603 Jy ! Component: 3800 - total flux cleaned = -0.00454655 Jy ! Component: 3850 - total flux cleaned = -0.00460299 Jy ! Component: 3900 - total flux cleaned = -0.00458698 Jy ! Component: 3950 - total flux cleaned = -0.00463477 Jy ! Component: 4000 - total flux cleaned = -0.00466646 Jy ! Component: 4050 - total flux cleaned = -0.00465067 Jy ! Total flux subtracted in 4096 components = -0.00466634 Jy ! Clean residual min=-0.000490 max=0.000422 Jy/beam ! Clean residual mean=0.000000 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.489243 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 539 components and 0.489243 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0745+3142_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8837 x 1.671 at 0.6984 degrees (North through East) ! Clean map min=-0.00072721 max=0.25039 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0745+3142_X_map.fits wmodel /vlbi/uf001/uva//J0745+3142_X_map.mod ! Writing 539 model components to file: /vlbi/uf001/uva//J0745+3142_X_map.mod wobs /vlbi/uf001/uva//J0745+3142_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0745+3142_X_uvs.fits wwins /vlbi/uf001/uva//J0745+3142_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0745+3142_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.250385 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135909 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.162841 0.162841 0.325681 0.651362 1.30272 2.60545 5.2109 10.4218 20.8436 41.6872 83.3744 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.25 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1842.29 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0745+3142_X_dfm.log closed on Sun Jan 13 23:36:43 2019