! Started logfile: /vlbi/uf001/uvm//J0743-4434_S_a_dfm.log on Sun Jan 13 21:02:27 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0743-4434_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0743-4434_S_a_uvm.fits
! AN table 1: 74 integrations on 10 of 10 possible baselines.
! AN table 2: 148 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.858559 visibilities/baseline/integration-bin.
! Found source: J0743-4434
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5718 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0743-4434_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 94 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 94 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 94 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.016830Jy  sigma=12.857015
! Fit after  self-cal, rms=0.837929Jy  sigma=10.447098
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.16 mas, bmaj=89.79 mas, bpa=-4.818 degrees
! Estimated noise=0.934323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130725 Jy
! Component: 100  -  total flux cleaned = 0.171503 Jy
! Total flux subtracted in 100 components = 0.171503 Jy
! Clean residual min=-0.010797 max=0.017939 Jy/beam
! Clean residual mean=-0.000557 rms=0.004329 Jy/beam
! Combined flux in latest and established models = 0.171503 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.171503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098207Jy  sigma=1.169445
! Fit after  self-cal, rms=0.097991Jy  sigma=1.166915
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.17 mas, bmaj=95.57 mas, bpa=-4.293 degrees
! Estimated noise=0.765089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222124 Jy
! Component: 100  -  total flux cleaned = 0.0328358 Jy
! Component: 150  -  total flux cleaned = 0.0382204 Jy
! Component: 200  -  total flux cleaned = 0.0414313 Jy
! Total flux subtracted in 200 components = 0.0414313 Jy
! Clean residual min=-0.006164 max=0.004201 Jy/beam
! Clean residual mean=-0.000293 rms=0.001892 Jy/beam
! Combined flux in latest and established models = 0.212935 Jy
! Performing phase self-cal
! Adding 126 model components to the UV plane model.
! The established model now contains 163 components and 0.212934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093234Jy  sigma=1.105813
! Fit after  self-cal, rms=0.093109Jy  sigma=1.104337
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.17 x 95.57 at -4.293 degrees (North through East)
! Clean map  min=-0.006512  max=0.16886 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        0.97     LA        1.05     OV        1.03     
!   PT        1.01     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.06     LA        0.91     NL        1.34     OV        1.07     
!   PT        1.02     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        1.02     LA        0.98     OV        1.01     
!   PT        1.04     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.05     LA        0.90     NL        1.14     OV        0.88     
!   PT        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        0.99     LA        0.97     OV        0.98     
!   PT        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.06     LA        0.88     NL        1.29     OV        1.05     
!   PT        1.02     
! 
! 
! Fit before self-cal, rms=0.093109Jy  sigma=1.104337
! Fit after  self-cal, rms=0.098644Jy  sigma=1.089679
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.58 mas, bmaj=94.72 mas, bpa=-4.071 degrees
! Estimated noise=0.774612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124464 Jy
! Component: 100  -  total flux cleaned = 0.00129135 Jy
! Component: 150  -  total flux cleaned = 0.00125035 Jy
! Component: 200  -  total flux cleaned = 0.00118316 Jy
! Total flux subtracted in 200 components = 0.00118316 Jy
! Clean residual min=-0.002621 max=0.002489 Jy/beam
! Clean residual mean=-0.000032 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.214118 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 206 components and 0.214118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098606Jy  sigma=1.089218
! Fit after  self-cal, rms=0.098702Jy  sigma=1.088663
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098702Jy  sigma=1.088663
! Fit after  self-cal, rms=0.099045Jy  sigma=1.085518
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.57 mas, bmaj=94.76 mas, bpa=-4.064 degrees
! Estimated noise=0.775791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330666 Jy
! Component: 100  -  total flux cleaned = 0.000545202 Jy
! Component: 150  -  total flux cleaned = 0.000672226 Jy
! Component: 200  -  total flux cleaned = 0.000673462 Jy
! Total flux subtracted in 200 components = 0.000673462 Jy
! Clean residual min=-0.002014 max=0.001794 Jy/beam
! Clean residual mean=-0.000020 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.214791 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 240 components and 0.214791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099017Jy  sigma=1.085253
! Fit after  self-cal, rms=0.099043Jy  sigma=1.085206
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.88243e-06 Jy
! Component: 100  -  total flux cleaned = 5.51755e-06 Jy
! Component: 150  -  total flux cleaned = 6.02413e-06 Jy
! Component: 200  -  total flux cleaned = 3.31921e-05 Jy
! Total flux subtracted in 200 components = 3.31921e-05 Jy
! Clean residual min=-0.002004 max=0.001825 Jy/beam
! Clean residual mean=-0.000021 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.214824 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 273 components and 0.214824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099019Jy  sigma=1.085041
! Fit after  self-cal, rms=0.099029Jy  sigma=1.085022
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099029Jy  sigma=1.085022
! Fit after  self-cal, rms=0.098740Jy  sigma=1.083281
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.54 mas, bmaj=94.85 mas, bpa=-4.071 degrees
! Estimated noise=0.774301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126299 Jy
! Component: 100  -  total flux cleaned = 0.000126371 Jy
! Component: 150  -  total flux cleaned = 9.64196e-05 Jy
! Component: 200  -  total flux cleaned = 0.000124708 Jy
! Total flux subtracted in 200 components = 0.000124708 Jy
! Clean residual min=-0.002017 max=0.001818 Jy/beam
! Clean residual mean=-0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.214949 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 302 components and 0.214949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098715Jy  sigma=1.083113
! Fit after  self-cal, rms=0.098741Jy  sigma=1.083067
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.27704e-06 Jy
! Component: 100  -  total flux cleaned = 3.42336e-05 Jy
! Component: 150  -  total flux cleaned = 3.31006e-05 Jy
! Component: 200  -  total flux cleaned = 3.27119e-05 Jy
! Total flux subtracted in 200 components = 3.27119e-05 Jy
! Clean residual min=-0.002025 max=0.001787 Jy/beam
! Clean residual mean=-0.000001 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.214982 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 329 components and 0.214982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098723Jy  sigma=1.082938
! Fit after  self-cal, rms=0.098731Jy  sigma=1.082927
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098731Jy  sigma=1.082927
! Fit after  self-cal, rms=0.097867Jy  sigma=1.082898
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.75 mas, bmaj=96.21 mas, bpa=-3.795 degrees
! Estimated noise=0.766702 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.04719e-05 Jy
! Component: 100  -  total flux cleaned = -0.000118461 Jy
! Component: 150  -  total flux cleaned = -0.000153066 Jy
! Component: 200  -  total flux cleaned = -0.000168692 Jy
! Total flux subtracted in 200 components = -0.000168692 Jy
! Clean residual min=-0.001764 max=0.001538 Jy/beam
! Clean residual mean=-0.000005 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.214813 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 353 components and 0.214813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097854Jy  sigma=1.082795
! Fit after  self-cal, rms=0.097853Jy  sigma=1.082787
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.37241e-05 Jy
! Component: 100  -  total flux cleaned = 1.39201e-05 Jy
! Component: 150  -  total flux cleaned = 2.87372e-05 Jy
! Component: 200  -  total flux cleaned = 4.30249e-05 Jy
! Total flux subtracted in 200 components = 4.30249e-05 Jy
! Clean residual min=-0.001774 max=0.001531 Jy/beam
! Clean residual mean=-0.000004 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.214856 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 364 components and 0.214856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097843Jy  sigma=1.082709
! Fit after  self-cal, rms=0.097850Jy  sigma=1.082702
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.49 mas, bmaj=94.9 mas, bpa=-4.084 degrees
! Estimated noise=0.772328 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.49 x 94.9 at -4.084 degrees (North through East)
! Clean map  min=-0.0021129  max=0.17081 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.48 mas, bmaj=89.22 mas, bpa=-4.675 degrees
! Estimated noise=0.939022 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130267 Jy
! Component: 100  -  total flux cleaned = 0.171548 Jy
! Component: 150  -  total flux cleaned = 0.191444 Jy
! Component: 200  -  total flux cleaned = 0.20195 Jy
! Total flux subtracted in 200 components = 0.20195 Jy
! Clean residual min=-0.003417 max=0.005055 Jy/beam
! Clean residual mean=-0.000142 rms=0.001501 Jy/beam
! Combined flux in latest and established models = 0.20195 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 74 model components to the UV plane model.
! The established model now contains 74 components and 0.20195 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.49 mas, bmaj=94.9 mas, bpa=-4.084 degrees
! Estimated noise=0.772328 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00615425 Jy
! Component: 100  -  total flux cleaned = 0.00966013 Jy
! Component: 150  -  total flux cleaned = 0.0115069 Jy
! Component: 200  -  total flux cleaned = 0.0122316 Jy
! Total flux subtracted in 200 components = 0.0122316 Jy
! Clean residual min=-0.002205 max=0.002208 Jy/beam
! Clean residual mean=-0.000019 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.214182 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 127 components and 0.214182 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.75 mas, bmaj=96.21 mas, bpa=-3.795 degrees
! Estimated noise=0.766702 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427481 Jy
! Component: 100  -  total flux cleaned = 0.000430258 Jy
! Component: 150  -  total flux cleaned = 0.00040239 Jy
! Component: 200  -  total flux cleaned = 0.00037569 Jy
! Total flux subtracted in 200 components = 0.00037569 Jy
! Clean residual min=-0.001847 max=0.001758 Jy/beam
! Clean residual mean=-0.000013 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.214557 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.52202e-05 Jy
! Component: 100  -  total flux cleaned = -4.9109e-05 Jy
! Component: 150  -  total flux cleaned = -4.96941e-05 Jy
! Component: 200  -  total flux cleaned = -2.78666e-05 Jy
! Total flux subtracted in 200 components = -2.78666e-05 Jy
! Clean residual min=-0.001849 max=0.001667 Jy/beam
! Clean residual mean=-0.000013 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.214529 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 204 components and 0.214529 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.49 mas, bmaj=94.9 mas, bpa=-4.084 degrees
! Estimated noise=0.772328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.47548e-08 Jy
! Component: 100  -  total flux cleaned = 9.17009e-07 Jy
! Component: 150  -  total flux cleaned = 3.19855e-05 Jy
! Component: 200  -  total flux cleaned = 6.16293e-05 Jy
! Total flux subtracted in 200 components = 6.16293e-05 Jy
! Clean residual min=-0.002081 max=0.001765 Jy/beam
! Clean residual mean=-0.000011 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.214591 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 229 components and 0.214591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097845Jy  sigma=1.082730
! Fit after  self-cal, rms=0.097832Jy  sigma=1.082686
wmodel J0743-4434_S_a_map.mod
! Writing 229 model components to file: J0743-4434_S_a_map.mod
wobs   J0743-4434_S_a_uvs.fits
! Writing UV FITS file: J0743-4434_S_a_uvs.fits
wwins  J0743-4434_S_a_map.win
! wwins: Wrote 1 windows to J0743-4434_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000366068 Jy
! Component: 100  -  total flux cleaned = -0.000490687 Jy
! Component: 150  -  total flux cleaned = -0.000577092 Jy
! Component: 200  -  total flux cleaned = -0.000707621 Jy
! Component: 250  -  total flux cleaned = -0.000806189 Jy
! Component: 300  -  total flux cleaned = -0.000946761 Jy
! Component: 350  -  total flux cleaned = -0.0011034 Jy
! Component: 400  -  total flux cleaned = -0.0012544 Jy
! Component: 450  -  total flux cleaned = -0.00140035 Jy
! Component: 500  -  total flux cleaned = -0.00152093 Jy
! Component: 550  -  total flux cleaned = -0.00165689 Jy
! Component: 600  -  total flux cleaned = -0.00173233 Jy
! Component: 650  -  total flux cleaned = -0.00184169 Jy
! Component: 700  -  total flux cleaned = -0.00192987 Jy
! Component: 750  -  total flux cleaned = -0.00201553 Jy
! Component: 800  -  total flux cleaned = -0.00199914 Jy
! Component: 850  -  total flux cleaned = -0.00196667 Jy
! Component: 900  -  total flux cleaned = -0.00191903 Jy
! Component: 950  -  total flux cleaned = -0.00187219 Jy
! Component: 1000  -  total flux cleaned = -0.00175115 Jy
! Component: 1050  -  total flux cleaned = -0.00160268 Jy
! Component: 1100  -  total flux cleaned = -0.00147121 Jy
! Component: 1150  -  total flux cleaned = -0.00135621 Jy
! Component: 1200  -  total flux cleaned = -0.00124287 Jy
! Component: 1250  -  total flux cleaned = -0.00114521 Jy
! Component: 1300  -  total flux cleaned = -0.00103519 Jy
! Component: 1350  -  total flux cleaned = -0.000926763 Jy
! Component: 1400  -  total flux cleaned = -0.000859835 Jy
! Component: 1450  -  total flux cleaned = -0.000766962 Jy
! Component: 1500  -  total flux cleaned = -0.00066203 Jy
! Component: 1550  -  total flux cleaned = -0.00062317 Jy
! Component: 1600  -  total flux cleaned = -0.000597597 Jy
! Component: 1650  -  total flux cleaned = -0.000559453 Jy
! Component: 1700  -  total flux cleaned = -0.000534258 Jy
! Component: 1750  -  total flux cleaned = -0.000534272 Jy
! Component: 1800  -  total flux cleaned = -0.00049693 Jy
! Component: 1850  -  total flux cleaned = -0.00048454 Jy
! Component: 1900  -  total flux cleaned = -0.000472216 Jy
! Component: 1950  -  total flux cleaned = -0.000447752 Jy
! Component: 2000  -  total flux cleaned = -0.000423512 Jy
! Component: 2050  -  total flux cleaned = -0.000399467 Jy
! Component: 2100  -  total flux cleaned = -0.000399395 Jy
! Component: 2150  -  total flux cleaned = -0.000351733 Jy
! Component: 2200  -  total flux cleaned = -0.000328011 Jy
! Component: 2250  -  total flux cleaned = -0.000316239 Jy
! Component: 2300  -  total flux cleaned = -0.000304521 Jy
! Component: 2350  -  total flux cleaned = -0.000304438 Jy
! Component: 2400  -  total flux cleaned = -0.000304376 Jy
! Component: 2450  -  total flux cleaned = -0.000292796 Jy
! Component: 2500  -  total flux cleaned = -0.000304414 Jy
! Component: 2550  -  total flux cleaned = -0.000292842 Jy
! Component: 2600  -  total flux cleaned = -0.000269715 Jy
! Component: 2650  -  total flux cleaned = -0.000235095 Jy
! Component: 2700  -  total flux cleaned = -0.000223506 Jy
! Component: 2750  -  total flux cleaned = -0.00018896 Jy
! Component: 2800  -  total flux cleaned = -0.000177488 Jy
! Component: 2850  -  total flux cleaned = -0.000142887 Jy
! Component: 2900  -  total flux cleaned = -0.000142819 Jy
! Component: 2950  -  total flux cleaned = -0.000154389 Jy
! Component: 3000  -  total flux cleaned = -0.000177483 Jy
! Component: 3050  -  total flux cleaned = -0.000177484 Jy
! Component: 3100  -  total flux cleaned = -0.000189083 Jy
! Component: 3150  -  total flux cleaned = -0.000212433 Jy
! Component: 3200  -  total flux cleaned = -0.000235865 Jy
! Component: 3250  -  total flux cleaned = -0.000247605 Jy
! Component: 3300  -  total flux cleaned = -0.000282947 Jy
! Component: 3350  -  total flux cleaned = -0.000306511 Jy
! Component: 3400  -  total flux cleaned = -0.000330203 Jy
! Component: 3450  -  total flux cleaned = -0.000365831 Jy
! Component: 3500  -  total flux cleaned = -0.000365853 Jy
! Component: 3550  -  total flux cleaned = -0.000389781 Jy
! Component: 3600  -  total flux cleaned = -0.000425804 Jy
! Component: 3650  -  total flux cleaned = -0.000437865 Jy
! Component: 3700  -  total flux cleaned = -0.000461939 Jy
! Component: 3750  -  total flux cleaned = -0.00049825 Jy
! Component: 3800  -  total flux cleaned = -0.000522581 Jy
! Component: 3850  -  total flux cleaned = -0.000546986 Jy
! Component: 3900  -  total flux cleaned = -0.000596087 Jy
! Component: 3950  -  total flux cleaned = -0.000583853 Jy
! Component: 4000  -  total flux cleaned = -0.000620934 Jy
! Component: 4050  -  total flux cleaned = -0.000620958 Jy
! Total flux subtracted in 4096 components = -0.000670726 Jy
! Clean residual min=-0.000726 max=0.000650 Jy/beam
! Clean residual mean=-0.000002 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.21392 Jy
keep
! Adding 473 model components to the UV plane model.
! The established model now contains 702 components and 0.21392 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0743-4434_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.49 x 94.9 at -4.084 degrees (North through East)
! Clean map  min=-0.0022476  max=0.17114 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0743-4434_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0743-4434_S_a_map.mod
! Writing 702 model components to file: /vlbi/uf001/uvm//J0743-4434_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0743-4434_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0743-4434_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0743-4434_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J0743-4434_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.17114 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270506 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.474185 0.474185 0.94837 1.89674 3.79348 7.58696 15.1739 30.3478 60.6957
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.171 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  632.664 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0743-4434_S_a_dfm.log closed on Sun Jan 13 21:02:34 2019