! Started logfile: /vlbi/uf001/uva//J0743+1714_X_dfm.log on Sun Jan 13 23:35:02 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0743+1714_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0743+1714_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.967251 visibilities/baseline/integration-bin.
! Found source: J0743+1714
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29772 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0743+1714_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.044828Jy  sigma=22.951869
! Fit after  self-cal, rms=0.709406Jy  sigma=15.467855
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7019 mas, bmaj=1.551 mas, bpa=-1.149 degrees
! Estimated noise=0.355094 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.216458 Jy
! Component: 100  -  total flux cleaned = 0.273323 Jy
! Total flux subtracted in 100 components = 0.273323 Jy
! Clean residual min=-0.010135 max=0.023169 Jy/beam
! Clean residual mean=0.000011 rms=0.002066 Jy/beam
! Combined flux in latest and established models = 0.273323 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.273323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083356Jy  sigma=1.722271
! Fit after  self-cal, rms=0.083327Jy  sigma=1.721751
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0253248 Jy
! Component: 100  -  total flux cleaned = 0.0403507 Jy
! Total flux subtracted in 100 components = 0.0403507 Jy
! Clean residual min=-0.009146 max=0.009639 Jy/beam
! Clean residual mean=0.000006 rms=0.001467 Jy/beam
! Combined flux in latest and established models = 0.313674 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.313674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072071Jy  sigma=1.434493
! Fit after  self-cal, rms=0.072025Jy  sigma=1.433547
! Inverting map 
! Added new window around map position (-0.8, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108356 Jy
! Component: 100  -  total flux cleaned = 0.0186547 Jy
! Total flux subtracted in 100 components = 0.0186547 Jy
! Clean residual min=-0.008380 max=0.008406 Jy/beam
! Clean residual mean=0.000002 rms=0.001301 Jy/beam
! Combined flux in latest and established models = 0.332328 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.332328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069573Jy  sigma=1.367342
! Fit after  self-cal, rms=0.069502Jy  sigma=1.365551
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8918 mas, bmaj=1.879 mas, bpa=-0.5409 degrees
! Estimated noise=0.204007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104385 Jy
! Component: 100  -  total flux cleaned = 0.0162386 Jy
! Component: 150  -  total flux cleaned = 0.0190476 Jy
! Component: 200  -  total flux cleaned = 0.0206147 Jy
! Total flux subtracted in 200 components = 0.0206147 Jy
! Clean residual min=-0.005711 max=0.005951 Jy/beam
! Clean residual mean=-0.000004 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.352943 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 53 components and 0.352943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067858Jy  sigma=1.318030
! Fit after  self-cal, rms=0.067839Jy  sigma=1.317478
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8918 x 1.879 at -0.5409 degrees (North through East)
! Clean map  min=-0.0049163  max=0.28813 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        0.90     KP        1.01     
!   LA        1.04     MK        1.05     NL        1.01     OV        0.94     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.88     KP        1.02     
!   LA        1.04     MK        1.07     NL        1.01     OV        0.94     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.91     KP        1.00     
!   LA        1.03     MK        1.07     NL        0.99     OV        0.93     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.89     KP        1.01     
!   LA        1.02     MK        1.08     NL        1.00     OV        0.95     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.91     KP        1.00     
!   LA        1.03     MK        1.07     NL        1.00     OV        0.94     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.91     KP        1.01     
!   LA        1.03     MK        1.08     NL        1.00     OV        0.96     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.89     KP        1.01     
!   LA        1.04     MK        1.09     NL        1.02     OV        0.95     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.89     KP        1.01     
!   LA        1.04     MK        1.08     NL        1.01     OV        0.95     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.91     KP        1.00     
!   LA        1.02     MK        1.10     NL        1.00     OV        0.95     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.92     KP        1.01     
!   LA        1.05     MK        1.10     NL        1.01     OV        0.95     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.91     KP        1.01     
!   LA        1.02     MK        1.04     NL        0.99     OV        0.95     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.90     KP        1.01     
!   LA        1.04     MK        1.03     NL        1.00     OV        0.94     
!   PT        0.96     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.067839Jy  sigma=1.317478
! Fit after  self-cal, rms=0.063388Jy  sigma=1.241248
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8996 mas, bmaj=1.895 mas, bpa=-0.329 degrees
! Estimated noise=0.203154 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.6, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126922 Jy
! Component: 100  -  total flux cleaned = 0.0011545 Jy
! Component: 150  -  total flux cleaned = 0.00124015 Jy
! Component: 200  -  total flux cleaned = 0.00116557 Jy
! Total flux subtracted in 200 components = 0.00116557 Jy
! Clean residual min=-0.002819 max=0.003137 Jy/beam
! Clean residual mean=-0.000005 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.354109 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 75 components and 0.354108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063021Jy  sigma=1.234575
! Fit after  self-cal, rms=0.063002Jy  sigma=1.234018
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063002Jy  sigma=1.234018
! Fit after  self-cal, rms=0.063029Jy  sigma=1.203986
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=1.897 mas, bpa=-0.4925 degrees
! Estimated noise=0.203616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00240746 Jy
! Component: 100  -  total flux cleaned = -0.00298752 Jy
! Component: 150  -  total flux cleaned = -0.00294111 Jy
! Component: 200  -  total flux cleaned = -0.00302243 Jy
! Total flux subtracted in 200 components = -0.00302243 Jy
! Clean residual min=-0.001508 max=0.001583 Jy/beam
! Clean residual mean=0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.351086 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.351086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062902Jy  sigma=1.201519
! Fit after  self-cal, rms=0.062925Jy  sigma=1.201445
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000733947 Jy
! Component: 100  -  total flux cleaned = 0.000736685 Jy
! Component: 150  -  total flux cleaned = 0.000632076 Jy
! Component: 200  -  total flux cleaned = 0.0005667 Jy
! Total flux subtracted in 200 components = 0.0005667 Jy
! Clean residual min=-0.001429 max=0.001376 Jy/beam
! Clean residual mean=0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.351653 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 106 components and 0.351653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062873Jy  sigma=1.200383
! Fit after  self-cal, rms=0.062871Jy  sigma=1.200356
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062871Jy  sigma=1.200356
! Fit after  self-cal, rms=0.063356Jy  sigma=1.198530
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.896 mas, bmaj=1.898 mas, bpa=-0.5386 degrees
! Estimated noise=0.203616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00150135 Jy
! Component: 100  -  total flux cleaned = -0.00185091 Jy
! Component: 150  -  total flux cleaned = -0.00198936 Jy
! Component: 200  -  total flux cleaned = -0.0021406 Jy
! Total flux subtracted in 200 components = -0.0021406 Jy
! Clean residual min=-0.001394 max=0.001199 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.349512 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.349512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063298Jy  sigma=1.197383
! Fit after  self-cal, rms=0.063305Jy  sigma=1.197359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.71709e-05 Jy
! Component: 100  -  total flux cleaned = -0.000130991 Jy
! Component: 150  -  total flux cleaned = -0.000206516 Jy
! Component: 200  -  total flux cleaned = -0.000230412 Jy
! Total flux subtracted in 200 components = -0.000230412 Jy
! Clean residual min=-0.001350 max=0.001171 Jy/beam
! Clean residual mean=0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.349282 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 129 components and 0.349282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063284Jy  sigma=1.196948
! Fit after  self-cal, rms=0.063283Jy  sigma=1.196940
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063283Jy  sigma=1.196940
! Fit after  self-cal, rms=0.063321Jy  sigma=1.196603
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.132 mas, bmaj=2.895 mas, bpa=-0.5348 degrees
! Estimated noise=0.256158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000528772 Jy
! Component: 100  -  total flux cleaned = -0.000707503 Jy
! Component: 150  -  total flux cleaned = -0.000833301 Jy
! Component: 200  -  total flux cleaned = -0.000851634 Jy
! Total flux subtracted in 200 components = -0.000851634 Jy
! Clean residual min=-0.001402 max=0.001240 Jy/beam
! Clean residual mean=0.000002 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.34843 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 144 components and 0.34843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063309Jy  sigma=1.196359
! Fit after  self-cal, rms=0.063309Jy  sigma=1.196332
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.54272e-05 Jy
! Component: 100  -  total flux cleaned = -0.000145204 Jy
! Component: 150  -  total flux cleaned = -0.000184573 Jy
! Component: 200  -  total flux cleaned = -0.000219965 Jy
! Total flux subtracted in 200 components = -0.000219965 Jy
! Clean residual min=-0.001379 max=0.001239 Jy/beam
! Clean residual mean=0.000002 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.34821 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 154 components and 0.34821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063308Jy  sigma=1.196293
! Fit after  self-cal, rms=0.063306Jy  sigma=1.196278
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8952 mas, bmaj=1.898 mas, bpa=-0.535 degrees
! Estimated noise=0.203455 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8952 x 1.898 at -0.535 degrees (North through East)
! Clean map  min=-0.0010794  max=0.28807 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7034 mas, bmaj=1.563 mas, bpa=-1.07 degrees
! Estimated noise=0.356686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.217315 Jy
! Component: 100  -  total flux cleaned = 0.274547 Jy
! Component: 150  -  total flux cleaned = 0.299208 Jy
! Component: 200  -  total flux cleaned = 0.313197 Jy
! Total flux subtracted in 200 components = 0.313197 Jy
! Clean residual min=-0.003549 max=0.007296 Jy/beam
! Clean residual mean=0.000005 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.313197 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.313197 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8952 mas, bmaj=1.898 mas, bpa=-0.535 degrees
! Estimated noise=0.203455 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120121 Jy
! Component: 100  -  total flux cleaned = 0.0189896 Jy
! Component: 150  -  total flux cleaned = 0.0236022 Jy
! Component: 200  -  total flux cleaned = 0.0267736 Jy
! Total flux subtracted in 200 components = 0.0267736 Jy
! Clean residual min=-0.001463 max=0.001936 Jy/beam
! Clean residual mean=0.000003 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.339971 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 43 components and 0.339971 Jy
! Inverting map 
! Added new window around map position (0.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233033 Jy
! Component: 100  -  total flux cleaned = 0.00412241 Jy
! Component: 150  -  total flux cleaned = 0.00495576 Jy
! Component: 200  -  total flux cleaned = 0.00543151 Jy
! Total flux subtracted in 200 components = 0.00543151 Jy
! Clean residual min=-0.001314 max=0.001297 Jy/beam
! Clean residual mean=0.000002 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.345402 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 65 components and 0.345402 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.132 mas, bmaj=2.895 mas, bpa=-0.5348 degrees
! Estimated noise=0.256158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128305 Jy
! Component: 100  -  total flux cleaned = 0.0019972 Jy
! Component: 150  -  total flux cleaned = 0.00237935 Jy
! Component: 200  -  total flux cleaned = 0.00252915 Jy
! Total flux subtracted in 200 components = 0.00252915 Jy
! Clean residual min=-0.001473 max=0.001152 Jy/beam
! Clean residual mean=0.000002 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.347932 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.66475e-05 Jy
! Component: 100  -  total flux cleaned = 0.00012532 Jy
! Component: 150  -  total flux cleaned = 0.000187372 Jy
! Component: 200  -  total flux cleaned = 0.000215852 Jy
! Total flux subtracted in 200 components = 0.000215852 Jy
! Clean residual min=-0.001429 max=0.001113 Jy/beam
! Clean residual mean=0.000002 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.348147 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 108 components and 0.348147 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8952 mas, bmaj=1.898 mas, bpa=-0.535 degrees
! Estimated noise=0.203455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367304 Jy
! Component: 100  -  total flux cleaned = -0.000443604 Jy
! Component: 150  -  total flux cleaned = -0.000477714 Jy
! Component: 200  -  total flux cleaned = -0.000379623 Jy
! Total flux subtracted in 200 components = -0.000379623 Jy
! Clean residual min=-0.001118 max=0.001054 Jy/beam
! Clean residual mean=0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.347768 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.347768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063317Jy  sigma=1.196688
! Fit after  self-cal, rms=0.063304Jy  sigma=1.196518
wmodel J0743+1714_X_map.mod
! Writing 124 model components to file: J0743+1714_X_map.mod
wobs   J0743+1714_X_uvs.fits
! Writing UV FITS file: J0743+1714_X_uvs.fits
wwins  J0743+1714_X_map.win
! wwins: Wrote 6 windows to J0743+1714_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000247031 Jy
! Component: 100  -  total flux cleaned = -0.000324105 Jy
! Component: 150  -  total flux cleaned = -0.00041716 Jy
! Component: 200  -  total flux cleaned = -0.000435356 Jy
! Component: 250  -  total flux cleaned = -0.000400749 Jy
! Component: 300  -  total flux cleaned = -0.000383794 Jy
! Component: 350  -  total flux cleaned = -0.000300911 Jy
! Component: 400  -  total flux cleaned = -0.000219925 Jy
! Component: 450  -  total flux cleaned = -0.000140295 Jy
! Component: 500  -  total flux cleaned = -6.21091e-05 Jy
! Component: 550  -  total flux cleaned = -1.60883e-05 Jy
! Component: 600  -  total flux cleaned = 1.42505e-05 Jy
! Component: 650  -  total flux cleaned = -1.57814e-05 Jy
! Component: 700  -  total flux cleaned = -4.53696e-05 Jy
! Component: 750  -  total flux cleaned = -8.90427e-05 Jy
! Component: 800  -  total flux cleaned = -5.99909e-05 Jy
! Component: 850  -  total flux cleaned = -7.45898e-05 Jy
! Component: 900  -  total flux cleaned = -4.60601e-05 Jy
! Component: 950  -  total flux cleaned = -3.21139e-05 Jy
! Component: 1000  -  total flux cleaned = 9.38772e-06 Jy
! Component: 1050  -  total flux cleaned = 9.22857e-06 Jy
! Component: 1100  -  total flux cleaned = -1.80802e-05 Jy
! Component: 1150  -  total flux cleaned = -4.52233e-06 Jy
! Component: 1200  -  total flux cleaned = 3.57933e-05 Jy
! Component: 1250  -  total flux cleaned = -3.89781e-06 Jy
! Component: 1300  -  total flux cleaned = 6.18022e-05 Jy
! Component: 1350  -  total flux cleaned = 7.48131e-05 Jy
! Component: 1400  -  total flux cleaned = 0.000113432 Jy
! Component: 1450  -  total flux cleaned = 7.47746e-05 Jy
! Component: 1500  -  total flux cleaned = 7.49065e-05 Jy
! Component: 1550  -  total flux cleaned = 4.97296e-05 Jy
! Component: 1600  -  total flux cleaned = 0.000112306 Jy
! Component: 1650  -  total flux cleaned = 5.03091e-05 Jy
! Component: 1700  -  total flux cleaned = 7.4818e-05 Jy
! Component: 1750  -  total flux cleaned = 7.50134e-05 Jy
! Component: 1800  -  total flux cleaned = 0.000123558 Jy
! Component: 1850  -  total flux cleaned = 5.11832e-05 Jy
! Component: 1900  -  total flux cleaned = 8.7218e-05 Jy
! Component: 1950  -  total flux cleaned = 3.96311e-05 Jy
! Component: 2000  -  total flux cleaned = 5.14294e-05 Jy
! Component: 2050  -  total flux cleaned = 6.30094e-05 Jy
! Component: 2100  -  total flux cleaned = 4.74546e-06 Jy
! Component: 2150  -  total flux cleaned = -6.82634e-06 Jy
! Component: 2200  -  total flux cleaned = -6.66855e-06 Jy
! Component: 2250  -  total flux cleaned = 3.88639e-05 Jy
! Component: 2300  -  total flux cleaned = 1.61179e-05 Jy
! Component: 2350  -  total flux cleaned = 3.86851e-05 Jy
! Component: 2400  -  total flux cleaned = -1.73511e-05 Jy
! Component: 2450  -  total flux cleaned = -3.9672e-05 Jy
! Component: 2500  -  total flux cleaned = -6.41093e-06 Jy
! Component: 2550  -  total flux cleaned = -5.03189e-05 Jy
! Component: 2600  -  total flux cleaned = -6.60111e-06 Jy
! Component: 2650  -  total flux cleaned = -6.61681e-06 Jy
! Component: 2700  -  total flux cleaned = -4.97283e-05 Jy
! Component: 2750  -  total flux cleaned = -8.18148e-05 Jy
! Component: 2800  -  total flux cleaned = -1.77908e-05 Jy
! Component: 2850  -  total flux cleaned = -1.76611e-05 Jy
! Component: 2900  -  total flux cleaned = -2.8165e-05 Jy
! Component: 2950  -  total flux cleaned = 3.25363e-06 Jy
! Component: 3000  -  total flux cleaned = -7.14838e-06 Jy
! Component: 3050  -  total flux cleaned = 3.43176e-05 Jy
! Component: 3100  -  total flux cleaned = -2.74315e-05 Jy
! Component: 3150  -  total flux cleaned = -2.74268e-05 Jy
! Component: 3200  -  total flux cleaned = -5.80006e-05 Jy
! Component: 3250  -  total flux cleaned = -1.74498e-05 Jy
! Component: 3300  -  total flux cleaned = 2.72884e-06 Jy
! Component: 3350  -  total flux cleaned = -7.34513e-06 Jy
! Component: 3400  -  total flux cleaned = -7.28059e-06 Jy
! Component: 3450  -  total flux cleaned = 3.25222e-05 Jy
! Component: 3500  -  total flux cleaned = 3.24993e-05 Jy
! Component: 3550  -  total flux cleaned = 5.22673e-05 Jy
! Component: 3600  -  total flux cleaned = 5.23253e-05 Jy
! Component: 3650  -  total flux cleaned = 2.32388e-05 Jy
! Component: 3700  -  total flux cleaned = 3.29236e-05 Jy
! Component: 3750  -  total flux cleaned = 4.26475e-05 Jy
! Component: 3800  -  total flux cleaned = 7.13802e-05 Jy
! Component: 3850  -  total flux cleaned = 8.08879e-05 Jy
! Component: 3900  -  total flux cleaned = 6.20193e-05 Jy
! Component: 3950  -  total flux cleaned = 6.20504e-05 Jy
! Component: 4000  -  total flux cleaned = 0.000118323 Jy
! Component: 4050  -  total flux cleaned = 0.000137033 Jy
! Total flux subtracted in 4096 components = 0.000118507 Jy
! Clean residual min=-0.000647 max=0.000550 Jy/beam
! Clean residual mean=0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.347886 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 416 components and 0.347886 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0743+1714_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8952 x 1.898 at -0.535 degrees (North through East)
! Clean map  min=-0.00076835  max=0.28928 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0743+1714_X_map.fits
wmodel /vlbi/uf001/uva//J0743+1714_X_map.mod
! Writing 416 model components to file: /vlbi/uf001/uva//J0743+1714_X_map.mod
wobs   /vlbi/uf001/uva//J0743+1714_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0743+1714_X_uvs.fits
wwins  /vlbi/uf001/uva//J0743+1714_X_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J0743+1714_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.289281 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000157336 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.163166 0.163166 0.326331 0.652663 1.30533 2.61065 5.2213 10.4426 20.8852 41.7704 83.5408
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.289 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1838.62 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0743+1714_X_dfm.log closed on Sun Jan 13 23:35:08 2019