! Started logfile: /vlbi/uf001/uva//J0738-0626_S_dfm.log on Sun Jan 13 23:32:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0738-0626_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0738-0626_S_uva.fits
! AN table 1: 56 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.952381 visibilities/baseline/integration-bin.
! Found source: J0738-0626
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3360 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0738-0626_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.460770Jy  sigma=20.150625
! Fit after  self-cal, rms=0.491662Jy  sigma=8.496240
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.641 mas, bmaj=24.9 mas, bpa=-12.45 degrees
! Estimated noise=1.11887 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.548979 Jy
! Component: 100  -  total flux cleaned = 0.814544 Jy
! Total flux subtracted in 100 components = 0.814544 Jy
! Clean residual min=-0.074291 max=0.146731 Jy/beam
! Clean residual mean=-0.000251 rms=0.023610 Jy/beam
! Combined flux in latest and established models = 0.814544 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.814544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.392913Jy  sigma=4.866391
! Fit after  self-cal, rms=0.388987Jy  sigma=4.808844
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.166845 Jy
! Component: 100  -  total flux cleaned = 0.277749 Jy
! Total flux subtracted in 100 components = 0.277749 Jy
! Clean residual min=-0.048150 max=0.109395 Jy/beam
! Clean residual mean=-0.000110 rms=0.015102 Jy/beam
! Combined flux in latest and established models = 1.09229 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 1.09229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.232662Jy  sigma=3.024496
! Fit after  self-cal, rms=0.230676Jy  sigma=2.988283
! Inverting map 
! Added new window around map position (-9, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107024 Jy
! Component: 100  -  total flux cleaned = 0.171925 Jy
! Total flux subtracted in 100 components = 0.171925 Jy
! Clean residual min=-0.026643 max=0.035854 Jy/beam
! Clean residual mean=-0.000081 rms=0.008125 Jy/beam
! Combined flux in latest and established models = 1.26422 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 40 components and 1.26422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143967Jy  sigma=1.869880
! Fit after  self-cal, rms=0.142031Jy  sigma=1.831594
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.651 mas, bmaj=24.75 mas, bpa=-12.4 degrees
! Estimated noise=0.922212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0626997 Jy
! Component: 100  -  total flux cleaned = 0.101732 Jy
! Component: 150  -  total flux cleaned = 0.128339 Jy
! Component: 200  -  total flux cleaned = 0.147036 Jy
! Total flux subtracted in 200 components = 0.147036 Jy
! Clean residual min=-0.018990 max=0.016147 Jy/beam
! Clean residual mean=0.000026 rms=0.005409 Jy/beam
! Combined flux in latest and established models = 1.41125 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 94 components and 1.41125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096701Jy  sigma=1.327683
! Fit after  self-cal, rms=0.096310Jy  sigma=1.322204
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.651 x 24.75 at -12.4 degrees (North through East)
! Clean map  min=-0.018362  max=0.74487 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.01     KP        1.01     LA        0.95     
!   NL        1.04     OV        1.03     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.02     KP        1.00     LA        0.92     
!   NL        1.08     OV        0.96     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.06     KP        1.00     LA        0.95     
!   NL        1.01     OV        1.01     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.096310Jy  sigma=1.322204
! Fit after  self-cal, rms=0.082294Jy  sigma=1.152849
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.701 mas, bmaj=24.7 mas, bpa=-12.33 degrees
! Estimated noise=0.924652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00781425 Jy
! Component: 100  -  total flux cleaned = -0.00850767 Jy
! Component: 150  -  total flux cleaned = -0.00797271 Jy
! Component: 200  -  total flux cleaned = -0.00749401 Jy
! Total flux subtracted in 200 components = -0.00749401 Jy
! Clean residual min=-0.013392 max=0.012238 Jy/beam
! Clean residual mean=0.000028 rms=0.003933 Jy/beam
! Combined flux in latest and established models = 1.40376 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 116 components and 1.40376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080014Jy  sigma=1.108941
! Fit after  self-cal, rms=0.079916Jy  sigma=1.106867
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079916Jy  sigma=1.106867
! Fit after  self-cal, rms=0.071313Jy  sigma=1.004453
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.709 mas, bmaj=24.75 mas, bpa=-12.39 degrees
! Estimated noise=0.923016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00288225 Jy
! Component: 100  -  total flux cleaned = -0.0056148 Jy
! Component: 150  -  total flux cleaned = -0.00758908 Jy
! Component: 200  -  total flux cleaned = -0.00869532 Jy
! Total flux subtracted in 200 components = -0.00869532 Jy
! Clean residual min=-0.007663 max=0.009501 Jy/beam
! Clean residual mean=0.000016 rms=0.002593 Jy/beam
! Combined flux in latest and established models = 1.39506 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 136 components and 1.39506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070276Jy  sigma=0.988978
! Fit after  self-cal, rms=0.070258Jy  sigma=0.988140
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000355569 Jy
! Component: 100  -  total flux cleaned = -0.0014339 Jy
! Component: 150  -  total flux cleaned = -0.00189213 Jy
! Component: 200  -  total flux cleaned = -0.00229665 Jy
! Total flux subtracted in 200 components = -0.00229665 Jy
! Clean residual min=-0.007419 max=0.008954 Jy/beam
! Clean residual mean=0.000016 rms=0.002510 Jy/beam
! Combined flux in latest and established models = 1.39277 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 158 components and 1.39277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069982Jy  sigma=0.983896
! Fit after  self-cal, rms=0.069976Jy  sigma=0.983717
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069976Jy  sigma=0.983717
! Fit after  self-cal, rms=0.069753Jy  sigma=0.980034
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.709 mas, bmaj=24.77 mas, bpa=-12.37 degrees
! Estimated noise=0.922964 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198939 Jy
! Component: 100  -  total flux cleaned = -0.00339822 Jy
! Component: 150  -  total flux cleaned = -0.00463643 Jy
! Component: 200  -  total flux cleaned = -0.00527003 Jy
! Total flux subtracted in 200 components = -0.00527003 Jy
! Clean residual min=-0.007114 max=0.008953 Jy/beam
! Clean residual mean=0.000015 rms=0.002362 Jy/beam
! Combined flux in latest and established models = 1.3875 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 186 components and 1.3875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069485Jy  sigma=0.976608
! Fit after  self-cal, rms=0.069479Jy  sigma=0.976530
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000632118 Jy
! Component: 100  -  total flux cleaned = -0.000969086 Jy
! Component: 150  -  total flux cleaned = -0.0014043 Jy
! Component: 200  -  total flux cleaned = -0.00169725 Jy
! Total flux subtracted in 200 components = -0.00169725 Jy
! Clean residual min=-0.006958 max=0.008783 Jy/beam
! Clean residual mean=0.000016 rms=0.002330 Jy/beam
! Combined flux in latest and established models = 1.3858 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 212 components and 1.3858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069370Jy  sigma=0.974875
! Fit after  self-cal, rms=0.069365Jy  sigma=0.974833
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069365Jy  sigma=0.974833
! Fit after  self-cal, rms=0.069367Jy  sigma=0.974143
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.983 mas, bmaj=23.98 mas, bpa=-12.27 degrees
! Estimated noise=1.04397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00272938 Jy
! Component: 100  -  total flux cleaned = -0.00416288 Jy
! Component: 150  -  total flux cleaned = -0.00502601 Jy
! Component: 200  -  total flux cleaned = -0.00545012 Jy
! Total flux subtracted in 200 components = -0.00545012 Jy
! Clean residual min=-0.008090 max=0.011305 Jy/beam
! Clean residual mean=0.000022 rms=0.002972 Jy/beam
! Combined flux in latest and established models = 1.38035 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 233 components and 1.38035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069233Jy  sigma=0.973252
! Fit after  self-cal, rms=0.069223Jy  sigma=0.973202
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000562619 Jy
! Component: 100  -  total flux cleaned = -0.000823586 Jy
! Component: 150  -  total flux cleaned = -0.00106219 Jy
! Component: 200  -  total flux cleaned = -0.00120997 Jy
! Total flux subtracted in 200 components = -0.00120997 Jy
! Clean residual min=-0.008098 max=0.011193 Jy/beam
! Clean residual mean=0.000022 rms=0.002963 Jy/beam
! Combined flux in latest and established models = 1.37914 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 248 components and 1.37914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069181Jy  sigma=0.972720
! Fit after  self-cal, rms=0.069178Jy  sigma=0.972705
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.705 mas, bmaj=24.78 mas, bpa=-12.36 degrees
! Estimated noise=0.922865 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.705 x 24.78 at -12.36 degrees (North through East)
! Clean map  min=-0.0067448  max=0.74412 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069178Jy  sigma=0.972705
! Fit after  self-cal, rms=0.062732Jy  sigma=0.862405
! Inverting map and beam 
! Estimated beam: bmin=5.702 mas, bmaj=24.79 mas, bpa=-12.36 degrees
! Estimated noise=0.922074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00138916 Jy
! Component: 100  -  total flux cleaned = -0.00166057 Jy
! Component: 150  -  total flux cleaned = -0.00190378 Jy
! Component: 200  -  total flux cleaned = -0.00208123 Jy
! Total flux subtracted in 200 components = -0.00208123 Jy
! Clean residual min=-0.006306 max=0.008554 Jy/beam
! Clean residual mean=0.000011 rms=0.002201 Jy/beam
! Combined flux in latest and established models = 1.37706 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 271 components and 1.37706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062662Jy  sigma=0.860984
! Fit after  self-cal, rms=0.062663Jy  sigma=0.860955
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000416535 Jy
! Component: 100  -  total flux cleaned = -0.000535702 Jy
! Component: 150  -  total flux cleaned = -0.000684628 Jy
! Component: 200  -  total flux cleaned = -0.000720225 Jy
! Total flux subtracted in 200 components = -0.000720225 Jy
! Clean residual min=-0.006280 max=0.008487 Jy/beam
! Clean residual mean=0.000011 rms=0.002192 Jy/beam
! Combined flux in latest and established models = 1.37634 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 281 components and 1.37634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062628Jy  sigma=0.860205
! Fit after  self-cal, rms=0.062627Jy  sigma=0.860174
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062627Jy  sigma=0.860174
! Fit after  self-cal, rms=0.062609Jy  sigma=0.860014
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.691 mas, bmaj=24.88 mas, bpa=-12.44 degrees
! Estimated noise=1.12129 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.547008 Jy
! Component: 100  -  total flux cleaned = 0.813849 Jy
! Component: 150  -  total flux cleaned = 0.98604 Jy
! Component: 200  -  total flux cleaned = 1.10376 Jy
! Total flux subtracted in 200 components = 1.10376 Jy
! Clean residual min=-0.030168 max=0.064297 Jy/beam
! Clean residual mean=-0.000100 rms=0.010934 Jy/beam
! Combined flux in latest and established models = 1.10377 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 1.10377 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.702 mas, bmaj=24.79 mas, bpa=-12.36 degrees
! Estimated noise=0.921973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112166 Jy
! Component: 100  -  total flux cleaned = 0.178488 Jy
! Component: 150  -  total flux cleaned = 0.219171 Jy
! Component: 200  -  total flux cleaned = 0.245623 Jy
! Total flux subtracted in 200 components = 0.245623 Jy
! Clean residual min=-0.013089 max=0.014409 Jy/beam
! Clean residual mean=0.000012 rms=0.003856 Jy/beam
! Combined flux in latest and established models = 1.34939 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 54 components and 1.34939 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.983 mas, bmaj=23.99 mas, bpa=-12.26 degrees
! Estimated noise=1.04317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196054 Jy
! Component: 100  -  total flux cleaned = 0.023435 Jy
! Component: 150  -  total flux cleaned = 0.0246062 Jy
! Component: 200  -  total flux cleaned = 0.0245625 Jy
! Total flux subtracted in 200 components = 0.0245625 Jy
! Clean residual min=-0.009887 max=0.012200 Jy/beam
! Clean residual mean=0.000016 rms=0.003190 Jy/beam
! Combined flux in latest and established models = 1.37395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220157 Jy
! Component: 100  -  total flux cleaned = -1.03219e-05 Jy
! Component: 150  -  total flux cleaned = 0.000492909 Jy
! Component: 200  -  total flux cleaned = 0.000493646 Jy
! Total flux subtracted in 200 components = 0.000493646 Jy
! Clean residual min=-0.008962 max=0.011840 Jy/beam
! Clean residual mean=0.000016 rms=0.002998 Jy/beam
! Combined flux in latest and established models = 1.37444 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 130 components and 1.37444 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.702 mas, bmaj=24.79 mas, bpa=-12.36 degrees
! Estimated noise=0.921973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164393 Jy
! Component: 100  -  total flux cleaned = 0.00212473 Jy
! Component: 150  -  total flux cleaned = 0.00253641 Jy
! Component: 200  -  total flux cleaned = 0.00302257 Jy
! Total flux subtracted in 200 components = 0.00302257 Jy
! Clean residual min=-0.007267 max=0.009182 Jy/beam
! Clean residual mean=0.000009 rms=0.002329 Jy/beam
! Combined flux in latest and established models = 1.37747 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 150 components and 1.37747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063152Jy  sigma=0.873229
! Fit after  self-cal, rms=0.063159Jy  sigma=0.871259
wmodel J0738-0626_S_map.mod
! Writing 150 model components to file: J0738-0626_S_map.mod
wobs   J0738-0626_S_uvs.fits
! Writing UV FITS file: J0738-0626_S_uvs.fits
wwins  J0738-0626_S_map.win
! wwins: Wrote 2 windows to J0738-0626_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.003965 Jy
! Component: 100  -  total flux cleaned = 0.00717473 Jy
! Component: 150  -  total flux cleaned = 0.00910125 Jy
! Component: 200  -  total flux cleaned = 0.0104314 Jy
! Component: 250  -  total flux cleaned = 0.0117755 Jy
! Component: 300  -  total flux cleaned = 0.0125552 Jy
! Component: 350  -  total flux cleaned = 0.0136621 Jy
! Component: 400  -  total flux cleaned = 0.0145408 Jy
! Component: 450  -  total flux cleaned = 0.0155472 Jy
! Component: 500  -  total flux cleaned = 0.01635 Jy
! Component: 550  -  total flux cleaned = 0.0171965 Jy
! Component: 600  -  total flux cleaned = 0.0180091 Jy
! Component: 650  -  total flux cleaned = 0.0186496 Jy
! Component: 700  -  total flux cleaned = 0.0194715 Jy
! Component: 750  -  total flux cleaned = 0.0200021 Jy
! Component: 800  -  total flux cleaned = 0.0205784 Jy
! Component: 850  -  total flux cleaned = 0.0209509 Jy
! Component: 900  -  total flux cleaned = 0.0212522 Jy
! Component: 950  -  total flux cleaned = 0.0214286 Jy
! Component: 1000  -  total flux cleaned = 0.0217706 Jy
! Component: 1050  -  total flux cleaned = 0.0218259 Jy
! Component: 1100  -  total flux cleaned = 0.0219352 Jy
! Component: 1150  -  total flux cleaned = 0.022042 Jy
! Component: 1200  -  total flux cleaned = 0.022197 Jy
! Component: 1250  -  total flux cleaned = 0.0221469 Jy
! Component: 1300  -  total flux cleaned = 0.0221973 Jy
! Component: 1350  -  total flux cleaned = 0.0221979 Jy
! Component: 1400  -  total flux cleaned = 0.0221983 Jy
! Component: 1450  -  total flux cleaned = 0.0221532 Jy
! Component: 1500  -  total flux cleaned = 0.0221989 Jy
! Component: 1550  -  total flux cleaned = 0.0221104 Jy
! Component: 1600  -  total flux cleaned = 0.0221106 Jy
! Component: 1650  -  total flux cleaned = 0.0219822 Jy
! Component: 1700  -  total flux cleaned = 0.0220243 Jy
! Component: 1750  -  total flux cleaned = 0.0220241 Jy
! Component: 1800  -  total flux cleaned = 0.021944 Jy
! Component: 1850  -  total flux cleaned = 0.0219835 Jy
! Component: 1900  -  total flux cleaned = 0.0218273 Jy
! Component: 1950  -  total flux cleaned = 0.0219045 Jy
! Component: 2000  -  total flux cleaned = 0.0217161 Jy
! Component: 2050  -  total flux cleaned = 0.0218276 Jy
! Component: 2100  -  total flux cleaned = 0.0217542 Jy
! Component: 2150  -  total flux cleaned = 0.021754 Jy
! Component: 2200  -  total flux cleaned = 0.0216836 Jy
! Component: 2250  -  total flux cleaned = 0.0216484 Jy
! Component: 2300  -  total flux cleaned = 0.0216142 Jy
! Component: 2350  -  total flux cleaned = 0.0216474 Jy
! Component: 2400  -  total flux cleaned = 0.0215465 Jy
! Component: 2450  -  total flux cleaned = 0.0214806 Jy
! Component: 2500  -  total flux cleaned = 0.0214479 Jy
! Component: 2550  -  total flux cleaned = 0.0213524 Jy
! Component: 2600  -  total flux cleaned = 0.0213838 Jy
! Component: 2650  -  total flux cleaned = 0.021322 Jy
! Component: 2700  -  total flux cleaned = 0.021261 Jy
! Component: 2750  -  total flux cleaned = 0.021291 Jy
! Component: 2800  -  total flux cleaned = 0.0211419 Jy
! Component: 2850  -  total flux cleaned = 0.0211124 Jy
! Component: 2900  -  total flux cleaned = 0.0209959 Jy
! Component: 2950  -  total flux cleaned = 0.0208526 Jy
! Component: 3000  -  total flux cleaned = 0.0208242 Jy
! Component: 3050  -  total flux cleaned = 0.0206837 Jy
! Component: 3100  -  total flux cleaned = 0.0206004 Jy
! Component: 3150  -  total flux cleaned = 0.0205452 Jy
! Component: 3200  -  total flux cleaned = 0.0204364 Jy
! Component: 3250  -  total flux cleaned = 0.0203292 Jy
! Component: 3300  -  total flux cleaned = 0.0203027 Jy
! Component: 3350  -  total flux cleaned = 0.0202762 Jy
! Component: 3400  -  total flux cleaned = 0.0201982 Jy
! Component: 3450  -  total flux cleaned = 0.0203017 Jy
! Component: 3500  -  total flux cleaned = 0.0201481 Jy
! Component: 3550  -  total flux cleaned = 0.020199 Jy
! Component: 3600  -  total flux cleaned = 0.0202243 Jy
! Component: 3650  -  total flux cleaned = 0.0202243 Jy
! Component: 3700  -  total flux cleaned = 0.0201999 Jy
! Component: 3750  -  total flux cleaned = 0.020249 Jy
! Component: 3800  -  total flux cleaned = 0.0202731 Jy
! Component: 3850  -  total flux cleaned = 0.0202729 Jy
! Component: 3900  -  total flux cleaned = 0.0203204 Jy
! Component: 3950  -  total flux cleaned = 0.0203201 Jy
! Component: 4000  -  total flux cleaned = 0.0202963 Jy
! Component: 4050  -  total flux cleaned = 0.0203196 Jy
! Total flux subtracted in 4096 components = 0.0203896 Jy
! Clean residual min=-0.001334 max=0.001408 Jy/beam
! Clean residual mean=0.000004 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 1.39786 Jy
keep
! Adding 522 model components to the UV plane model.
! The established model now contains 672 components and 1.39786 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0738-0626_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.702 x 24.79 at -12.36 degrees (North through East)
! Clean map  min=-0.0034767  max=0.7426 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0738-0626_S_map.fits
wmodel /vlbi/uf001/uva//J0738-0626_S_map.mod
! Writing 672 model components to file: /vlbi/uf001/uva//J0738-0626_S_map.mod
wobs   /vlbi/uf001/uva//J0738-0626_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0738-0626_S_uvs.fits
wwins  /vlbi/uf001/uva//J0738-0626_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0738-0626_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.742599 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000508323 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.205356 0.205356 0.410711 0.821422 1.64284 3.28569 6.57138 13.1428 26.2855 52.571
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.742 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1460.88 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0738-0626_S_dfm.log closed on Sun Jan 13 23:32:49 2019