! Started logfile: /vlbi/uf001/uva//J0737-3954_S_b_dfm.log on Sun Jan 13 23:32:13 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0737-3954_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0737-3954_S_b_uva.fits
! AN table 1: 148 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.797297 visibilities/baseline/integration-bin.
! Found source: J0737-3954
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3540 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0737-3954_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017693Jy  sigma=12.972662
! Fit after  self-cal, rms=0.872324Jy  sigma=11.097465
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.502 mas, bmaj=40.64 mas, bpa=-13.09 degrees
! Estimated noise=2.36799 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101159 Jy
! Component: 100  -  total flux cleaned = 0.134311 Jy
! Total flux subtracted in 100 components = 0.134311 Jy
! Clean residual min=-0.012706 max=0.015942 Jy/beam
! Clean residual mean=-0.000094 rms=0.005724 Jy/beam
! Combined flux in latest and established models = 0.134311 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.134311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094611Jy  sigma=1.166264
! Fit after  self-cal, rms=0.094359Jy  sigma=1.162591
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.592 mas, bmaj=41.03 mas, bpa=-11.81 degrees
! Estimated noise=0.955689 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016778 Jy
! Component: 100  -  total flux cleaned = 0.0193425 Jy
! Component: 150  -  total flux cleaned = 0.0208728 Jy
! Component: 200  -  total flux cleaned = 0.0204544 Jy
! Total flux subtracted in 200 components = 0.0204544 Jy
! Clean residual min=-0.003206 max=0.003207 Jy/beam
! Clean residual mean=-0.000084 rms=0.001523 Jy/beam
! Combined flux in latest and established models = 0.154765 Jy
! Performing phase self-cal
! Adding 103 model components to the UV plane model.
! The established model now contains 142 components and 0.154765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090387Jy  sigma=1.107867
! Fit after  self-cal, rms=0.090276Jy  sigma=1.106707
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.592 x 41.03 at -11.81 degrees (North through East)
! Clean map  min=-0.0066263  max=0.13164 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.00     LA        0.92     NL        1.05     OV        1.08     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.02     LA        0.96     NL        1.05     OV        0.86     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.01     LA        0.93     NL        1.06     OV        1.01     
!   PT        1.05     
! 
! 
! Fit before self-cal, rms=0.090276Jy  sigma=1.106707
! Fit after  self-cal, rms=0.089017Jy  sigma=1.097936
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.738 mas, bmaj=40.7 mas, bpa=-11.47 degrees
! Estimated noise=0.938306 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.74097e-05 Jy
! Component: 100  -  total flux cleaned = -0.000398039 Jy
! Component: 150  -  total flux cleaned = -0.000608672 Jy
! Component: 200  -  total flux cleaned = -0.000554119 Jy
! Total flux subtracted in 200 components = -0.000554119 Jy
! Clean residual min=-0.000840 max=0.000826 Jy/beam
! Clean residual mean=0.000007 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.154211 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 212 components and 0.154211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088873Jy  sigma=1.096152
! Fit after  self-cal, rms=0.088923Jy  sigma=1.095597
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088923Jy  sigma=1.095597
! Fit after  self-cal, rms=0.088774Jy  sigma=1.094543
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.73 mas, bmaj=40.91 mas, bpa=-11.56 degrees
! Estimated noise=0.936728 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00055262 Jy
! Component: 100  -  total flux cleaned = 0.000594634 Jy
! Component: 150  -  total flux cleaned = 0.000486595 Jy
! Component: 200  -  total flux cleaned = 0.000349608 Jy
! Total flux subtracted in 200 components = 0.000349608 Jy
! Clean residual min=-0.000558 max=0.000552 Jy/beam
! Clean residual mean=-0.000004 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.154561 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 269 components and 0.154561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088736Jy  sigma=1.094173
! Fit after  self-cal, rms=0.088760Jy  sigma=1.094078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108902 Jy
! Component: 100  -  total flux cleaned = -0.000200831 Jy
! Component: 150  -  total flux cleaned = -0.000336022 Jy
! Component: 200  -  total flux cleaned = -0.000535001 Jy
! Total flux subtracted in 200 components = -0.000535001 Jy
! Clean residual min=-0.000400 max=0.000398 Jy/beam
! Clean residual mean=-0.000005 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.154026 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 333 components and 0.154026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088740Jy  sigma=1.093881
! Fit after  self-cal, rms=0.088747Jy  sigma=1.093862
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088747Jy  sigma=1.093862
! Fit after  self-cal, rms=0.088452Jy  sigma=1.093848
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.712 mas, bmaj=40.92 mas, bpa=-11.59 degrees
! Estimated noise=0.934984 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.98412e-05 Jy
! Component: 100  -  total flux cleaned = -4.97002e-05 Jy
! Component: 150  -  total flux cleaned = -0.000188012 Jy
! Component: 200  -  total flux cleaned = -0.00023118 Jy
! Total flux subtracted in 200 components = -0.00023118 Jy
! Clean residual min=-0.000353 max=0.000354 Jy/beam
! Clean residual mean=-0.000005 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.153794 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 377 components and 0.153794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088438Jy  sigma=1.093718
! Fit after  self-cal, rms=0.088442Jy  sigma=1.093706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152543 Jy
! Component: 100  -  total flux cleaned = -0.000112574 Jy
! Component: 150  -  total flux cleaned = -3.2596e-05 Jy
! Component: 200  -  total flux cleaned = -1.3509e-05 Jy
! Total flux subtracted in 200 components = -1.3509e-05 Jy
! Clean residual min=-0.000316 max=0.000315 Jy/beam
! Clean residual mean=-0.000005 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.153781 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 428 components and 0.153781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088433Jy  sigma=1.093611
! Fit after  self-cal, rms=0.088436Jy  sigma=1.093605
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088436Jy  sigma=1.093605
! Fit after  self-cal, rms=0.088169Jy  sigma=1.093599
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.34 mas, bmaj=42.14 mas, bpa=-9.55 degrees
! Estimated noise=0.935527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.7567e-05 Jy
! Component: 100  -  total flux cleaned = -0.00010742 Jy
! Component: 150  -  total flux cleaned = -0.000140241 Jy
! Component: 200  -  total flux cleaned = -0.000172417 Jy
! Total flux subtracted in 200 components = -0.000172417 Jy
! Clean residual min=-0.000265 max=0.000265 Jy/beam
! Clean residual mean=-0.000005 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.153608 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 462 components and 0.153609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088161Jy  sigma=1.093529
! Fit after  self-cal, rms=0.088162Jy  sigma=1.093525
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012214 Jy
! Component: 100  -  total flux cleaned = -0.000137908 Jy
! Component: 150  -  total flux cleaned = -0.000167939 Jy
! Component: 200  -  total flux cleaned = -0.000182501 Jy
! Total flux subtracted in 200 components = -0.000182501 Jy
! Clean residual min=-0.000246 max=0.000245 Jy/beam
! Clean residual mean=-0.000006 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.153426 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 499 components and 0.153426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088156Jy  sigma=1.093463
! Fit after  self-cal, rms=0.088158Jy  sigma=1.093461
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.697 mas, bmaj=40.92 mas, bpa=-11.61 degrees
! Estimated noise=0.933421 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.697 x 40.92 at -11.61 degrees (North through East)
! Clean map  min=-0.0054216  max=0.12877 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.624 mas, bmaj=40.81 mas, bpa=-13.01 degrees
! Estimated noise=2.31221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0980725 Jy
! Component: 100  -  total flux cleaned = 0.13007 Jy
! Component: 150  -  total flux cleaned = 0.147275 Jy
! Component: 200  -  total flux cleaned = 0.152643 Jy
! Total flux subtracted in 200 components = 0.152643 Jy
! Clean residual min=-0.006059 max=0.006121 Jy/beam
! Clean residual mean=-0.000030 rms=0.002752 Jy/beam
! Combined flux in latest and established models = 0.152643 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 96 model components to the UV plane model.
! The established model now contains 96 components and 0.152643 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.697 mas, bmaj=40.92 mas, bpa=-11.61 degrees
! Estimated noise=0.933421 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158893 Jy
! Component: 100  -  total flux cleaned = 0.00156677 Jy
! Component: 150  -  total flux cleaned = 0.0022549 Jy
! Component: 200  -  total flux cleaned = 0.00305828 Jy
! Total flux subtracted in 200 components = 0.00305828 Jy
! Clean residual min=-0.001729 max=0.001732 Jy/beam
! Clean residual mean=-0.000017 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.155702 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 190 components and 0.155702 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.34 mas, bmaj=42.14 mas, bpa=-9.55 degrees
! Estimated noise=0.935527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011016 Jy
! Component: 100  -  total flux cleaned = 0.000582332 Jy
! Component: 150  -  total flux cleaned = 0.000765868 Jy
! Component: 200  -  total flux cleaned = 0.000883422 Jy
! Total flux subtracted in 200 components = 0.000883422 Jy
! Clean residual min=-0.000947 max=0.000950 Jy/beam
! Clean residual mean=0.000001 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.156585 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.77218e-05 Jy
! Component: 100  -  total flux cleaned = 0.00011739 Jy
! Component: 150  -  total flux cleaned = 0.000117807 Jy
! Component: 200  -  total flux cleaned = 0.0001161 Jy
! Total flux subtracted in 200 components = 0.0001161 Jy
! Clean residual min=-0.001048 max=0.001053 Jy/beam
! Clean residual mean=0.000002 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.156701 Jy
! Adding 96 model components to the UV plane model.
! The established model now contains 284 components and 0.156701 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.697 mas, bmaj=40.92 mas, bpa=-11.61 degrees
! Estimated noise=0.933421 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.61228e-05 Jy
! Component: 100  -  total flux cleaned = -0.000210209 Jy
! Component: 150  -  total flux cleaned = -0.000287343 Jy
! Component: 200  -  total flux cleaned = -0.000431509 Jy
! Total flux subtracted in 200 components = -0.000431509 Jy
! Clean residual min=-0.000588 max=0.000594 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.15627 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 333 components and 0.15627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088208Jy  sigma=1.094008
! Fit after  self-cal, rms=0.088203Jy  sigma=1.093885
wmodel J0737-3954_S_b_map.mod
! Writing 333 model components to file: J0737-3954_S_b_map.mod
wobs   J0737-3954_S_b_uvs.fits
! Writing UV FITS file: J0737-3954_S_b_uvs.fits
wwins  J0737-3954_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J0737-3954_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.697 x 40.92 at -11.61 degrees (North through East)
! Clean map  min=-0.0039069  max=0.12382 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0737-3954_S_b_map.fits
wmodel /vlbi/uf001/uva//J0737-3954_S_b_map.mod
! Writing 333 model components to file: /vlbi/uf001/uva//J0737-3954_S_b_map.mod
wobs   /vlbi/uf001/uva//J0737-3954_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0737-3954_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0737-3954_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123818 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212493 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.514851 0.514851 1.0297 2.0594 4.11881 8.23761 16.4752 32.9505 65.9009
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  582.693 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0737-3954_S_b_dfm.log closed on Sun Jan 13 23:32:16 2019