! Started logfile: /vlbi/uf001/uvm//J0736-1853_X_a_dfm.log on Sun Jan 13 21:01:52 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0736-1853_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0736-1853_X_a_uvm.fits ! AN table 1: 74 integrations on 36 of 36 possible baselines. ! AN table 2: 118 integrations on 28 of 28 possible baselines. ! AN table 3: 59 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.94252 visibilities/baseline/integration-bin. ! Found source: J0736-1853 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 86184 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0736-1853_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.007130Jy sigma=21.524889 ! Fit after self-cal, rms=0.921259Jy sigma=19.594456 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6202 mas, bmaj=1.763 mas, bpa=-14.6 degrees ! Estimated noise=0.316264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461345 Jy ! Component: 100 - total flux cleaned = 0.0679687 Jy ! Total flux subtracted in 100 components = 0.0679687 Jy ! Clean residual min=-0.004084 max=0.011686 Jy/beam ! Clean residual mean=-0.000002 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.0679686 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0679686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075606Jy sigma=1.567067 ! Fit after self-cal, rms=0.075134Jy sigma=1.557866 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152821 Jy ! Component: 100 - total flux cleaned = 0.0255086 Jy ! Total flux subtracted in 100 components = 0.0255086 Jy ! Clean residual min=-0.003053 max=0.007131 Jy/beam ! Clean residual mean=-0.000002 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0934772 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 0.0934772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067854Jy sigma=1.374691 ! Fit after self-cal, rms=0.067809Jy sigma=1.373746 ! Inverting map ! Added new window around map position (-1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803852 Jy ! Component: 100 - total flux cleaned = 0.0137632 Jy ! Total flux subtracted in 100 components = 0.0137632 Jy ! Clean residual min=-0.002857 max=0.004350 Jy/beam ! Clean residual mean=-0.000002 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.10724 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 47 components and 0.10724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065378Jy sigma=1.311400 ! Fit after self-cal, rms=0.065340Jy sigma=1.310575 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483791 Jy ! Component: 100 - total flux cleaned = 0.00842712 Jy ! Total flux subtracted in 100 components = 0.00842712 Jy ! Clean residual min=-0.002701 max=0.003718 Jy/beam ! Clean residual mean=-0.000002 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.115667 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.115667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064304Jy sigma=1.283683 ! Fit after self-cal, rms=0.064285Jy sigma=1.283221 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8587 mas, bmaj=2.398 mas, bpa=-15 degrees ! Estimated noise=0.116487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870105 Jy ! Component: 100 - total flux cleaned = 0.0139572 Jy ! Component: 150 - total flux cleaned = 0.0173669 Jy ! Component: 200 - total flux cleaned = 0.0196222 Jy ! Total flux subtracted in 200 components = 0.0196222 Jy ! Clean residual min=-0.003650 max=0.007401 Jy/beam ! Clean residual mean=-0.000004 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.13529 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 81 components and 0.13529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063139Jy sigma=1.251888 ! Fit after self-cal, rms=0.063079Jy sigma=1.250287 ! Inverting map ! Added new window around map position (-4.8, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785236 Jy ! Component: 100 - total flux cleaned = 0.0126169 Jy ! Component: 150 - total flux cleaned = 0.0159431 Jy ! Component: 200 - total flux cleaned = 0.0184737 Jy ! Total flux subtracted in 200 components = 0.0184737 Jy ! Clean residual min=-0.002749 max=0.004486 Jy/beam ! Clean residual mean=-0.000003 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.153763 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 127 components and 0.153763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062077Jy sigma=1.223291 ! Fit after self-cal, rms=0.061948Jy sigma=1.220111 ! Inverting map ! Added new window around map position (-7.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440245 Jy ! Component: 100 - total flux cleaned = 0.00719985 Jy ! Component: 150 - total flux cleaned = 0.00943232 Jy ! Component: 200 - total flux cleaned = 0.0113125 Jy ! Total flux subtracted in 200 components = 0.0113125 Jy ! Clean residual min=-0.002268 max=0.003497 Jy/beam ! Clean residual mean=-0.000002 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.165076 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 163 components and 0.165076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061576Jy sigma=1.210573 ! Fit after self-cal, rms=0.061547Jy sigma=1.209797 ! Inverting map ! Added new window around map position (-2.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333834 Jy ! Component: 100 - total flux cleaned = 0.0052898 Jy ! Component: 150 - total flux cleaned = 0.0068778 Jy ! Component: 200 - total flux cleaned = 0.00823159 Jy ! Total flux subtracted in 200 components = 0.00823159 Jy ! Clean residual min=-0.001870 max=0.002502 Jy/beam ! Clean residual mean=-0.000001 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.173307 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 196 components and 0.173307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061329Jy sigma=1.204816 ! Fit after self-cal, rms=0.061312Jy sigma=1.204343 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8587 x 2.398 at -15 degrees (North through East) ! Clean map min=-0.0018576 max=0.075661 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 HN 1.08 KP 1.03 LA 1.00 ! MK 1.24 NL 1.14 OV 0.92 PT 0.94 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.09 KP 1.02 ! LA 0.99 MK 1.09 NL 1.05 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.97 HN 1.07 KP 1.00 ! LA 1.02 MK 1.19 NL 1.02 OV 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 HN 1.09 KP 1.00 LA 1.03 ! MK 1.26 NL 1.17 OV 0.93 PT 0.93 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 1.12 KP 1.01 ! LA 0.98 MK 1.15 NL 1.02 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.99 HN 1.02 KP 1.04 ! LA 0.97 MK 1.21 NL 0.98 OV 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 HN 1.06 KP 1.02 LA 0.99 ! MK 1.19 NL 1.14 OV 0.94 PT 0.96 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 1.14 KP 1.00 ! LA 1.00 MK 1.13 NL 1.05 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.01 HN 0.97 KP 1.05 ! LA 0.96 MK 1.15 NL 1.08 OV 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 1.06 KP 1.04 LA 1.00 ! MK 1.25 NL 1.14 OV 0.95 PT 0.97 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 0.99 KP 0.99 ! LA 0.97 MK 1.12 NL 1.07 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.97 HN 0.95 KP 1.03 ! LA 0.98 MK 1.10 NL 1.01 OV 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 1.01 KP 1.04 LA 1.00 ! MK 1.24 NL 1.14 OV 0.96 PT 0.96 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 1.11 KP 0.99 ! LA 1.01 MK 1.04 NL 1.08 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.00 HN 1.02 KP 1.03 ! LA 0.98 MK 0.93 NL 1.03 OV 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 HN 1.11 KP 1.07 LA 1.00 ! MK 1.17 NL 1.15 OV 0.93 PT 0.96 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 1.04 KP 1.01 ! LA 0.96 MK 1.04 NL 1.08 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.01 HN 1.03 KP 1.04 ! LA 1.01 MK 1.04 NL 1.00 OV 0.86 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 1.08 KP 1.02 LA 1.01 ! MK 1.02 NL 1.19 OV 0.93 PT 0.94 ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 1.18 KP 1.04 ! LA 0.98 MK 0.96 NL 1.06 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.01 HN 0.96 KP 1.05 ! LA 0.98 MK 1.15 NL 0.95 OV 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 0.96 KP 1.06 LA 1.01 ! MK 1.11 NL 1.14 OV 0.90 PT 0.93 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 0.99 KP 0.99 ! LA 0.98 MK 0.96 NL 1.05 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 0.99 HN 0.97 KP 1.04 ! LA 1.00 MK 1.00 NL 1.06 OV 0.92 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.06 KP 1.02 LA 1.06 ! MK 0.98 NL 1.09 OV 0.95 PT 0.93 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 1.07 KP 0.97 ! LA 0.98 MK 0.95 NL 1.02 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 1.00 HN 0.95 KP 1.01 ! LA 0.96 MK 0.93 NL 0.98 OV 0.94 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 HN 1.06 KP 1.02 LA 1.02 ! MK 1.01 NL 1.10 OV 0.92 PT 0.94 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.04 KP 1.01 ! LA 0.98 MK 0.94 NL 1.04 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.02 HN 0.90 KP 1.06 ! LA 0.99 MK 0.95 NL 1.01 OV 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 0.96 KP 1.02 LA 1.03 ! MK 1.02 NL 1.17 OV 0.94 PT 0.94 ! SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 0.98 KP 1.02 ! LA 1.00 MK 0.84 NL 1.07 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 1.00 HN 0.93 KP 1.06 ! LA 0.96 MK 0.86 NL 1.04 OV 0.90 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 1.05 KP 0.99 LA 1.05 ! MK 0.94 NL 1.15 OV 0.93 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 1.04 KP 1.00 ! LA 1.04 MK 0.85 NL 1.03 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 0.97 HN 0.99 KP 1.08 ! LA 1.03 MK 0.78 NL 0.98 OV 0.91 ! ! ! Fit before self-cal, rms=0.061312Jy sigma=1.204343 ! Fit after self-cal, rms=0.062380Jy sigma=1.192841 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8693 mas, bmaj=2.422 mas, bpa=-15.01 degrees ! Estimated noise=0.118045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361179 Jy ! Component: 100 - total flux cleaned = 0.000396576 Jy ! Component: 150 - total flux cleaned = 0.000494349 Jy ! Component: 200 - total flux cleaned = 0.000575286 Jy ! Total flux subtracted in 200 components = 0.000575286 Jy ! Clean residual min=-0.001095 max=0.001303 Jy/beam ! Clean residual mean=0.000003 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.173883 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 226 components and 0.173883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062336Jy sigma=1.191823 ! Fit after self-cal, rms=0.062380Jy sigma=1.191501 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062380Jy sigma=1.191501 ! Fit after self-cal, rms=0.062599Jy sigma=1.190378 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.869 mas, bmaj=2.422 mas, bpa=-14.96 degrees ! Estimated noise=0.117963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289273 Jy ! Component: 100 - total flux cleaned = -0.000241321 Jy ! Component: 150 - total flux cleaned = -0.000221718 Jy ! Component: 200 - total flux cleaned = -0.000203027 Jy ! Total flux subtracted in 200 components = -0.000203027 Jy ! Clean residual min=-0.000973 max=0.001320 Jy/beam ! Clean residual mean=0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.17368 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 242 components and 0.17368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062581Jy sigma=1.190029 ! Fit after self-cal, rms=0.062586Jy sigma=1.189976 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131475 Jy ! Component: 100 - total flux cleaned = 0.00208898 Jy ! Component: 150 - total flux cleaned = 0.00267129 Jy ! Component: 200 - total flux cleaned = 0.00301534 Jy ! Total flux subtracted in 200 components = 0.00301534 Jy ! Clean residual min=-0.000947 max=0.000986 Jy/beam ! Clean residual mean=0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.176695 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 275 components and 0.176695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062556Jy sigma=1.189212 ! Fit after self-cal, rms=0.062556Jy sigma=1.189135 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062556Jy sigma=1.189135 ! Fit after self-cal, rms=0.062461Jy sigma=1.188993 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8684 mas, bmaj=2.424 mas, bpa=-14.97 degrees ! Estimated noise=0.117622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324748 Jy ! Component: 100 - total flux cleaned = 0.000610377 Jy ! Component: 150 - total flux cleaned = 0.000820384 Jy ! Component: 200 - total flux cleaned = 0.00101021 Jy ! Total flux subtracted in 200 components = 0.00101021 Jy ! Clean residual min=-0.000905 max=0.000873 Jy/beam ! Clean residual mean=0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.177705 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 281 components and 0.177705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062447Jy sigma=1.188679 ! Fit after self-cal, rms=0.062449Jy sigma=1.188655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218378 Jy ! Component: 100 - total flux cleaned = 0.000379655 Jy ! Component: 150 - total flux cleaned = 0.000528786 Jy ! Component: 200 - total flux cleaned = 0.00062664 Jy ! Total flux subtracted in 200 components = 0.00062664 Jy ! Clean residual min=-0.000902 max=0.000816 Jy/beam ! Clean residual mean=0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.178332 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 287 components and 0.178332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062442Jy sigma=1.188505 ! Fit after self-cal, rms=0.062441Jy sigma=1.188497 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062441Jy sigma=1.188497 ! Fit after self-cal, rms=0.062373Jy sigma=1.188434 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=4.583 mas, bpa=-5.524 degrees ! Estimated noise=0.144033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508758 Jy ! Component: 100 - total flux cleaned = 0.000777376 Jy ! Component: 150 - total flux cleaned = 0.000979998 Jy ! Component: 200 - total flux cleaned = 0.0011 Jy ! Total flux subtracted in 200 components = 0.0011 Jy ! Clean residual min=-0.001138 max=0.001171 Jy/beam ! Clean residual mean=0.000001 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.179432 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 310 components and 0.179432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062369Jy sigma=1.188326 ! Fit after self-cal, rms=0.062368Jy sigma=1.188295 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221679 Jy ! Component: 100 - total flux cleaned = 0.00035665 Jy ! Component: 150 - total flux cleaned = 0.000422642 Jy ! Component: 200 - total flux cleaned = 0.000463583 Jy ! Total flux subtracted in 200 components = 0.000463583 Jy ! Clean residual min=-0.001152 max=0.001136 Jy/beam ! Clean residual mean=0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.179895 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 318 components and 0.179896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062367Jy sigma=1.188273 ! Fit after self-cal, rms=0.062366Jy sigma=1.188269 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8679 mas, bmaj=2.425 mas, bpa=-14.96 degrees ! Estimated noise=0.117391 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8679 x 2.425 at -14.96 degrees (North through East) ! Clean map min=-0.00094342 max=0.076132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6249 mas, bmaj=1.773 mas, bpa=-14.58 degrees ! Estimated noise=0.326222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0474595 Jy ! Component: 100 - total flux cleaned = 0.0709073 Jy ! Component: 150 - total flux cleaned = 0.086022 Jy ! Component: 200 - total flux cleaned = 0.0966172 Jy ! Total flux subtracted in 200 components = 0.0966172 Jy ! Clean residual min=-0.003507 max=0.005910 Jy/beam ! Clean residual mean=-0.000001 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.0966172 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0966172 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8679 mas, bmaj=2.425 mas, bpa=-14.96 degrees ! Estimated noise=0.117391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016118 Jy ! Component: 100 - total flux cleaned = 0.0269315 Jy ! Component: 150 - total flux cleaned = 0.0352828 Jy ! Component: 200 - total flux cleaned = 0.0419516 Jy ! Total flux subtracted in 200 components = 0.0419516 Jy ! Clean residual min=-0.002850 max=0.004091 Jy/beam ! Clean residual mean=-0.000000 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.138569 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 80 components and 0.138569 Jy ! Inverting map ! Added new window around map position (0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541985 Jy ! Component: 100 - total flux cleaned = 0.00983834 Jy ! Component: 150 - total flux cleaned = 0.0134754 Jy ! Component: 200 - total flux cleaned = 0.0165288 Jy ! Total flux subtracted in 200 components = 0.0165288 Jy ! Clean residual min=-0.001792 max=0.001966 Jy/beam ! Clean residual mean=0.000001 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.155098 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 134 components and 0.155098 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=4.583 mas, bpa=-5.524 degrees ! Estimated noise=0.144033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460584 Jy ! Component: 100 - total flux cleaned = 0.00801652 Jy ! Component: 150 - total flux cleaned = 0.0107135 Jy ! Component: 200 - total flux cleaned = 0.012908 Jy ! Total flux subtracted in 200 components = 0.012908 Jy ! Clean residual min=-0.001767 max=0.001791 Jy/beam ! Clean residual mean=0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.168006 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184517 Jy ! Component: 100 - total flux cleaned = 0.00341587 Jy ! Component: 150 - total flux cleaned = 0.00475882 Jy ! Component: 200 - total flux cleaned = 0.00591315 Jy ! Total flux subtracted in 200 components = 0.00591315 Jy ! Clean residual min=-0.001385 max=0.001215 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.173919 Jy ! Adding 167 model components to the UV plane model. ! The established model now contains 270 components and 0.173919 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8679 mas, bmaj=2.425 mas, bpa=-14.96 degrees ! Estimated noise=0.117391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000982386 Jy ! Component: 100 - total flux cleaned = 0.00166533 Jy ! Component: 150 - total flux cleaned = 0.00224452 Jy ! Component: 200 - total flux cleaned = 0.00276784 Jy ! Total flux subtracted in 200 components = 0.00276784 Jy ! Clean residual min=-0.000887 max=0.000917 Jy/beam ! Clean residual mean=0.000001 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.176687 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 295 components and 0.176687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062393Jy sigma=1.188879 ! Fit after self-cal, rms=0.062371Jy sigma=1.188543 wmodel J0736-1853_X_a_map.mod ! Writing 295 model components to file: J0736-1853_X_a_map.mod wobs J0736-1853_X_a_uvs.fits ! Writing UV FITS file: J0736-1853_X_a_uvs.fits wwins J0736-1853_X_a_map.win ! wwins: Wrote 7 windows to J0736-1853_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000141753 Jy ! Component: 100 - total flux cleaned = -0.000113305 Jy ! Component: 150 - total flux cleaned = -0.000180842 Jy ! Component: 200 - total flux cleaned = -0.000219702 Jy ! Component: 250 - total flux cleaned = -0.000257148 Jy ! Component: 300 - total flux cleaned = -0.000280797 Jy ! Component: 350 - total flux cleaned = -0.000268854 Jy ! Component: 400 - total flux cleaned = -0.000280451 Jy ! Component: 450 - total flux cleaned = -0.000280626 Jy ! Component: 500 - total flux cleaned = -0.000258947 Jy ! Component: 550 - total flux cleaned = -0.00023787 Jy ! Component: 600 - total flux cleaned = -0.000227877 Jy ! Component: 650 - total flux cleaned = -0.000207703 Jy ! Component: 700 - total flux cleaned = -0.000197788 Jy ! Component: 750 - total flux cleaned = -0.000148941 Jy ! Component: 800 - total flux cleaned = -0.000139427 Jy ! Component: 850 - total flux cleaned = -0.000101605 Jy ! Component: 900 - total flux cleaned = -9.21339e-05 Jy ! Component: 950 - total flux cleaned = -4.63691e-05 Jy ! Component: 1000 - total flux cleaned = -1.04997e-05 Jy ! Component: 1050 - total flux cleaned = 2.52088e-05 Jy ! Component: 1100 - total flux cleaned = 8.67698e-05 Jy ! Component: 1150 - total flux cleaned = 0.000147404 Jy ! Component: 1200 - total flux cleaned = 0.0001817 Jy ! Component: 1250 - total flux cleaned = 0.00024098 Jy ! Component: 1300 - total flux cleaned = 0.000291139 Jy ! Component: 1350 - total flux cleaned = 0.000324231 Jy ! Component: 1400 - total flux cleaned = 0.000389297 Jy ! Component: 1450 - total flux cleaned = 0.000365232 Jy ! Component: 1500 - total flux cleaned = 0.00042903 Jy ! Component: 1550 - total flux cleaned = 0.000452596 Jy ! Component: 1600 - total flux cleaned = 0.000452689 Jy ! Component: 1650 - total flux cleaned = 0.00049905 Jy ! Component: 1700 - total flux cleaned = 0.000453084 Jy ! Component: 1750 - total flux cleaned = 0.000491184 Jy ! Component: 1800 - total flux cleaned = 0.000483643 Jy ! Component: 1850 - total flux cleaned = 0.000483747 Jy ! Component: 1900 - total flux cleaned = 0.000513323 Jy ! Component: 1950 - total flux cleaned = 0.000506016 Jy ! Component: 2000 - total flux cleaned = 0.000520459 Jy ! Component: 2050 - total flux cleaned = 0.000527644 Jy ! Component: 2100 - total flux cleaned = 0.000534677 Jy ! Component: 2150 - total flux cleaned = 0.000548768 Jy ! Component: 2200 - total flux cleaned = 0.000534621 Jy ! Component: 2250 - total flux cleaned = 0.000541566 Jy ! Component: 2300 - total flux cleaned = 0.000520911 Jy ! Component: 2350 - total flux cleaned = 0.000555257 Jy ! Component: 2400 - total flux cleaned = 0.000568856 Jy ! Component: 2450 - total flux cleaned = 0.000582352 Jy ! Component: 2500 - total flux cleaned = 0.000575602 Jy ! Component: 2550 - total flux cleaned = 0.000615601 Jy ! Component: 2600 - total flux cleaned = 0.000615567 Jy ! Component: 2650 - total flux cleaned = 0.000641857 Jy ! Component: 2700 - total flux cleaned = 0.000628815 Jy ! Component: 2750 - total flux cleaned = 0.00064181 Jy ! Component: 2800 - total flux cleaned = 0.000673999 Jy ! Component: 2850 - total flux cleaned = 0.000705947 Jy ! Component: 2900 - total flux cleaned = 0.000680441 Jy ! Component: 2950 - total flux cleaned = 0.000705791 Jy ! Component: 3000 - total flux cleaned = 0.000730906 Jy ! Component: 3050 - total flux cleaned = 0.00073095 Jy ! Component: 3100 - total flux cleaned = 0.000755843 Jy ! Component: 3150 - total flux cleaned = 0.000768103 Jy ! Component: 3200 - total flux cleaned = 0.000768124 Jy ! Component: 3250 - total flux cleaned = 0.000768106 Jy ! Component: 3300 - total flux cleaned = 0.000768174 Jy ! Component: 3350 - total flux cleaned = 0.000762108 Jy ! Component: 3400 - total flux cleaned = 0.000798026 Jy ! Component: 3450 - total flux cleaned = 0.000786038 Jy ! Component: 3500 - total flux cleaned = 0.000780111 Jy ! Component: 3550 - total flux cleaned = 0.000780081 Jy ! Component: 3600 - total flux cleaned = 0.00078006 Jy ! Component: 3650 - total flux cleaned = 0.000797483 Jy ! Component: 3700 - total flux cleaned = 0.000809097 Jy ! Component: 3750 - total flux cleaned = 0.000803345 Jy ! Component: 3800 - total flux cleaned = 0.000803389 Jy ! Component: 3850 - total flux cleaned = 0.000797659 Jy ! Component: 3900 - total flux cleaned = 0.000797684 Jy ! Component: 3950 - total flux cleaned = 0.000758184 Jy ! Component: 4000 - total flux cleaned = 0.000775001 Jy ! Component: 4050 - total flux cleaned = 0.000752677 Jy ! Total flux subtracted in 4096 components = 0.000763734 Jy ! Clean residual min=-0.000330 max=0.000316 Jy/beam ! Clean residual mean=0.000000 rms=0.000097 Jy/beam ! Combined flux in latest and established models = 0.177451 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 626 components and 0.177451 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0736-1853_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8679 x 2.425 at -14.96 degrees (North through East) ! Clean map min=-0.00047933 max=0.077796 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0736-1853_X_a_map.fits wmodel /vlbi/uf001/uvm//J0736-1853_X_a_map.mod ! Writing 626 model components to file: /vlbi/uf001/uvm//J0736-1853_X_a_map.mod wobs /vlbi/uf001/uvm//J0736-1853_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0736-1853_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0736-1853_X_a_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J0736-1853_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0777956 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.64416e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.371904 0.371904 0.743808 1.48762 2.97523 5.95046 11.9009 23.8018 47.6037 95.2074 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.077 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 806.66 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0736-1853_X_a_dfm.log closed on Sun Jan 13 21:02:03 2019