! Started logfile: /vlbi/uf001/uva//J0736-0433_S_dfm.log on Sun Jan 13 23:31:19 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0736-0433_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0736-0433_S_uva.fits
! AN table 1: 72 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.973545 visibilities/baseline/integration-bin.
! Found source: J0736-0433
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0736-0433_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006376Jy  sigma=20.554546
! Fit after  self-cal, rms=0.890498Jy  sigma=18.210028
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.938 mas, bmaj=23.99 mas, bpa=-11.85 degrees
! Estimated noise=0.624901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0882006 Jy
! Component: 100  -  total flux cleaned = 0.107436 Jy
! Total flux subtracted in 100 components = 0.107436 Jy
! Clean residual min=-0.006986 max=0.009985 Jy/beam
! Clean residual mean=-0.000010 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 0.107436 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.107436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064144Jy  sigma=1.292411
! Fit after  self-cal, rms=0.063795Jy  sigma=1.284420
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.783 mas, bmaj=24.65 mas, bpa=-12.92 degrees
! Estimated noise=0.528095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00275687 Jy
! Component: 100  -  total flux cleaned = -0.00423738 Jy
! Component: 150  -  total flux cleaned = -0.00563065 Jy
! Component: 200  -  total flux cleaned = -0.0069766 Jy
! Total flux subtracted in 200 components = -0.0069766 Jy
! Clean residual min=-0.005887 max=0.007993 Jy/beam
! Clean residual mean=-0.000015 rms=0.001979 Jy/beam
! Combined flux in latest and established models = 0.10046 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 35 components and 0.10046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063221Jy  sigma=1.271076
! Fit after  self-cal, rms=0.063216Jy  sigma=1.270841
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.783 x 24.65 at -12.92 degrees (North through East)
! Clean map  min=-0.0058041  max=0.11116 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     HN        0.99     KP        0.97     LA        0.91     
!   NL        1.01     OV        0.99     PT        1.23     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        0.97     KP        0.95     LA        0.92     
!   NL        1.00     OV        0.88     PT        1.21     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     HN        0.98     KP        0.96     LA        0.91     
!   NL        0.99     OV        0.99     PT        1.21     
! 
! 
! Fit before self-cal, rms=0.063216Jy  sigma=1.270841
! Fit after  self-cal, rms=0.062508Jy  sigma=1.242121
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.744 mas, bmaj=24.3 mas, bpa=-12.78 degrees
! Estimated noise=0.522698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000575453 Jy
! Component: 100  -  total flux cleaned = 0.000713128 Jy
! Component: 150  -  total flux cleaned = 0.000760008 Jy
! Component: 200  -  total flux cleaned = 0.000802106 Jy
! Total flux subtracted in 200 components = 0.000802106 Jy
! Clean residual min=-0.005353 max=0.006527 Jy/beam
! Clean residual mean=-0.000007 rms=0.001676 Jy/beam
! Combined flux in latest and established models = 0.101262 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 0.101262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062481Jy  sigma=1.241487
! Fit after  self-cal, rms=0.062514Jy  sigma=1.240832
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062514Jy  sigma=1.240832
! Fit after  self-cal, rms=0.068556Jy  sigma=1.184308
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.748 mas, bmaj=24.1 mas, bpa=-12.72 degrees
! Estimated noise=0.532299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237184 Jy
! Component: 100  -  total flux cleaned = 0.00409311 Jy
! Component: 150  -  total flux cleaned = 0.00544203 Jy
! Component: 200  -  total flux cleaned = 0.00650544 Jy
! Total flux subtracted in 200 components = 0.00650544 Jy
! Clean residual min=-0.002757 max=0.002805 Jy/beam
! Clean residual mean=0.000007 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.107767 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 76 components and 0.107767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068461Jy  sigma=1.181402
! Fit after  self-cal, rms=0.068637Jy  sigma=1.180495
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000931513 Jy
! Component: 100  -  total flux cleaned = 0.00160566 Jy
! Component: 150  -  total flux cleaned = 0.002132 Jy
! Component: 200  -  total flux cleaned = 0.00255668 Jy
! Total flux subtracted in 200 components = 0.00255668 Jy
! Clean residual min=-0.002671 max=0.002773 Jy/beam
! Clean residual mean=0.000007 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.110324 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 89 components and 0.110324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068628Jy  sigma=1.179972
! Fit after  self-cal, rms=0.068623Jy  sigma=1.179943
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068623Jy  sigma=1.179943
! Fit after  self-cal, rms=0.073611Jy  sigma=1.169027
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.746 mas, bmaj=24.1 mas, bpa=-12.68 degrees
! Estimated noise=0.53162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295071 Jy
! Component: 100  -  total flux cleaned = 0.000340835 Jy
! Component: 150  -  total flux cleaned = 0.000341811 Jy
! Component: 200  -  total flux cleaned = 0.00035072 Jy
! Total flux subtracted in 200 components = 0.00035072 Jy
! Clean residual min=-0.001572 max=0.001775 Jy/beam
! Clean residual mean=-0.000002 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.110674 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.110674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073602Jy  sigma=1.168921
! Fit after  self-cal, rms=0.073662Jy  sigma=1.168759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110655 Jy
! Component: 100  -  total flux cleaned = -6.65179e-05 Jy
! Component: 150  -  total flux cleaned = -3.37668e-05 Jy
! Component: 200  -  total flux cleaned = -3.147e-06 Jy
! Total flux subtracted in 200 components = -3.147e-06 Jy
! Clean residual min=-0.001561 max=0.001748 Jy/beam
! Clean residual mean=-0.000002 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.110671 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 115 components and 0.110671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073659Jy  sigma=1.168726
! Fit after  self-cal, rms=0.073659Jy  sigma=1.168720
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073659Jy  sigma=1.168720
! Fit after  self-cal, rms=0.073839Jy  sigma=1.168678
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.265 mas, bmaj=23.29 mas, bpa=-12.26 degrees
! Estimated noise=0.578739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000574956 Jy
! Component: 100  -  total flux cleaned = 0.000717254 Jy
! Component: 150  -  total flux cleaned = 0.000796133 Jy
! Component: 200  -  total flux cleaned = 0.000883116 Jy
! Total flux subtracted in 200 components = 0.000883116 Jy
! Clean residual min=-0.001640 max=0.001970 Jy/beam
! Clean residual mean=-0.000002 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.111554 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 122 components and 0.111554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073833Jy  sigma=1.168661
! Fit after  self-cal, rms=0.073835Jy  sigma=1.168653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.04598e-05 Jy
! Component: 100  -  total flux cleaned = 0.000131452 Jy
! Component: 150  -  total flux cleaned = 0.000193972 Jy
! Component: 200  -  total flux cleaned = 0.000236788 Jy
! Total flux subtracted in 200 components = 0.000236788 Jy
! Clean residual min=-0.001622 max=0.001972 Jy/beam
! Clean residual mean=-0.000002 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.111791 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 127 components and 0.111791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073833Jy  sigma=1.168657
! Fit after  self-cal, rms=0.073833Jy  sigma=1.168650
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.739 mas, bmaj=24.09 mas, bpa=-12.65 degrees
! Estimated noise=0.53145 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.739 x 24.09 at -12.65 degrees (North through East)
! Clean map  min=-0.0015339  max=0.11157 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.951 mas, bmaj=23.57 mas, bpa=-11.61 degrees
! Estimated noise=0.622023 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.087862 Jy
! Component: 100  -  total flux cleaned = 0.107066 Jy
! Component: 150  -  total flux cleaned = 0.111757 Jy
! Component: 200  -  total flux cleaned = 0.112004 Jy
! Total flux subtracted in 200 components = 0.112004 Jy
! Clean residual min=-0.002435 max=0.002633 Jy/beam
! Clean residual mean=-0.000003 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.112004 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.112004 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.739 mas, bmaj=24.09 mas, bpa=-12.65 degrees
! Estimated noise=0.53145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.24064e-05 Jy
! Component: 100  -  total flux cleaned = -0.000374212 Jy
! Component: 150  -  total flux cleaned = -0.000465988 Jy
! Component: 200  -  total flux cleaned = -0.000542507 Jy
! Total flux subtracted in 200 components = -0.000542507 Jy
! Clean residual min=-0.001694 max=0.001807 Jy/beam
! Clean residual mean=-0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.111462 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 37 components and 0.111462 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.265 mas, bmaj=23.29 mas, bpa=-12.26 degrees
! Estimated noise=0.578739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00035626 Jy
! Component: 100  -  total flux cleaned = 0.000305342 Jy
! Component: 150  -  total flux cleaned = 0.000261909 Jy
! Component: 200  -  total flux cleaned = 0.000249159 Jy
! Total flux subtracted in 200 components = 0.000249159 Jy
! Clean residual min=-0.001658 max=0.001955 Jy/beam
! Clean residual mean=-0.000003 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.111711 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.29532e-05 Jy
! Component: 100  -  total flux cleaned = -4.34641e-05 Jy
! Component: 150  -  total flux cleaned = -5.25177e-05 Jy
! Component: 200  -  total flux cleaned = -6.97912e-05 Jy
! Total flux subtracted in 200 components = -6.97912e-05 Jy
! Clean residual min=-0.001640 max=0.001960 Jy/beam
! Clean residual mean=-0.000002 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.111641 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 81 components and 0.111641 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.739 mas, bmaj=24.09 mas, bpa=-12.65 degrees
! Estimated noise=0.53145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176556 Jy
! Component: 100  -  total flux cleaned = -0.000212758 Jy
! Component: 150  -  total flux cleaned = -0.000233615 Jy
! Component: 200  -  total flux cleaned = -0.00024344 Jy
! Total flux subtracted in 200 components = -0.00024344 Jy
! Clean residual min=-0.001587 max=0.001745 Jy/beam
! Clean residual mean=-0.000002 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.111398 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 102 components and 0.111398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073834Jy  sigma=1.168780
! Fit after  self-cal, rms=0.073836Jy  sigma=1.168741
wmodel J0736-0433_S_map.mod
! Writing 102 model components to file: J0736-0433_S_map.mod
wobs   J0736-0433_S_uvs.fits
! Writing UV FITS file: J0736-0433_S_uvs.fits
wwins  J0736-0433_S_map.win
! wwins: Wrote 1 windows to J0736-0433_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536372 Jy
! Component: 100  -  total flux cleaned = 0.000508836 Jy
! Component: 150  -  total flux cleaned = 0.000508654 Jy
! Component: 200  -  total flux cleaned = 0.00050953 Jy
! Component: 250  -  total flux cleaned = 0.00046323 Jy
! Component: 300  -  total flux cleaned = 0.000419315 Jy
! Component: 350  -  total flux cleaned = 0.000377264 Jy
! Component: 400  -  total flux cleaned = 0.000377676 Jy
! Component: 450  -  total flux cleaned = 0.000398662 Jy
! Component: 500  -  total flux cleaned = 0.000493739 Jy
! Component: 550  -  total flux cleaned = 0.000475734 Jy
! Component: 600  -  total flux cleaned = 0.000440389 Jy
! Component: 650  -  total flux cleaned = 0.000405652 Jy
! Component: 700  -  total flux cleaned = 0.000354629 Jy
! Component: 750  -  total flux cleaned = 0.000272424 Jy
! Component: 800  -  total flux cleaned = 0.000208144 Jy
! Component: 850  -  total flux cleaned = 0.000145473 Jy
! Component: 900  -  total flux cleaned = 8.38079e-05 Jy
! Component: 950  -  total flux cleaned = -3.62164e-05 Jy
! Component: 1000  -  total flux cleaned = -0.000139047 Jy
! Component: 1050  -  total flux cleaned = -0.000240361 Jy
! Component: 1100  -  total flux cleaned = -0.000353838 Jy
! Component: 1150  -  total flux cleaned = -0.000451567 Jy
! Component: 1200  -  total flux cleaned = -0.000561193 Jy
! Component: 1250  -  total flux cleaned = -0.000655647 Jy
! Component: 1300  -  total flux cleaned = -0.000775087 Jy
! Component: 1350  -  total flux cleaned = -0.000892435 Jy
! Component: 1400  -  total flux cleaned = -0.00100781 Jy
! Component: 1450  -  total flux cleaned = -0.00110879 Jy
! Component: 1500  -  total flux cleaned = -0.00122048 Jy
! Component: 1550  -  total flux cleaned = -0.00134232 Jy
! Component: 1600  -  total flux cleaned = -0.00146233 Jy
! Component: 1650  -  total flux cleaned = -0.00154503 Jy
! Component: 1700  -  total flux cleaned = -0.0016615 Jy
! Component: 1750  -  total flux cleaned = -0.00171899 Jy
! Component: 1800  -  total flux cleaned = -0.00179853 Jy
! Component: 1850  -  total flux cleaned = -0.00187695 Jy
! Component: 1900  -  total flux cleaned = -0.0019322 Jy
! Component: 1950  -  total flux cleaned = -0.00198689 Jy
! Component: 2000  -  total flux cleaned = -0.00206228 Jy
! Component: 2050  -  total flux cleaned = -0.00211561 Jy
! Component: 2100  -  total flux cleaned = -0.00218939 Jy
! Component: 2150  -  total flux cleaned = -0.00222062 Jy
! Component: 2200  -  total flux cleaned = -0.00227216 Jy
! Component: 2250  -  total flux cleaned = -0.00232313 Jy
! Component: 2300  -  total flux cleaned = -0.00238363 Jy
! Component: 2350  -  total flux cleaned = -0.00241352 Jy
! Component: 2400  -  total flux cleaned = -0.00243319 Jy
! Component: 2450  -  total flux cleaned = -0.00248207 Jy
! Component: 2500  -  total flux cleaned = -0.00251098 Jy
! Component: 2550  -  total flux cleaned = -0.00253001 Jy
! Component: 2600  -  total flux cleaned = -0.00255846 Jy
! Component: 2650  -  total flux cleaned = -0.0025773 Jy
! Component: 2700  -  total flux cleaned = -0.00261455 Jy
! Component: 2750  -  total flux cleaned = -0.00266988 Jy
! Component: 2800  -  total flux cleaned = -0.00269727 Jy
! Component: 2850  -  total flux cleaned = -0.00272443 Jy
! Component: 2900  -  total flux cleaned = -0.00276925 Jy
! Component: 2950  -  total flux cleaned = -0.00278702 Jy
! Component: 3000  -  total flux cleaned = -0.00283986 Jy
! Component: 3050  -  total flux cleaned = -0.00286595 Jy
! Component: 3100  -  total flux cleaned = -0.0029006 Jy
! Component: 3150  -  total flux cleaned = -0.00290917 Jy
! Component: 3200  -  total flux cleaned = -0.00293472 Jy
! Component: 3250  -  total flux cleaned = -0.00292621 Jy
! Component: 3300  -  total flux cleaned = -0.00294312 Jy
! Component: 3350  -  total flux cleaned = -0.00297671 Jy
! Component: 3400  -  total flux cleaned = -0.00299345 Jy
! Component: 3450  -  total flux cleaned = -0.00300999 Jy
! Component: 3500  -  total flux cleaned = -0.00301826 Jy
! Component: 3550  -  total flux cleaned = -0.00301828 Jy
! Component: 3600  -  total flux cleaned = -0.00305906 Jy
! Component: 3650  -  total flux cleaned = -0.00306712 Jy
! Component: 3700  -  total flux cleaned = -0.00308328 Jy
! Component: 3750  -  total flux cleaned = -0.00310741 Jy
! Component: 3800  -  total flux cleaned = -0.00313929 Jy
! Component: 3850  -  total flux cleaned = -0.00314726 Jy
! Component: 3900  -  total flux cleaned = -0.00316307 Jy
! Component: 3950  -  total flux cleaned = -0.00317092 Jy
! Component: 4000  -  total flux cleaned = -0.00317878 Jy
! Component: 4050  -  total flux cleaned = -0.0031788 Jy
! Total flux subtracted in 4096 components = -0.00318657 Jy
! Clean residual min=-0.000432 max=0.000500 Jy/beam
! Clean residual mean=-0.000001 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.108211 Jy
keep
! Adding 380 model components to the UV plane model.
! The established model now contains 482 components and 0.108211 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0736-0433_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.739 x 24.09 at -12.65 degrees (North through East)
! Clean map  min=-0.0015639  max=0.11135 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0736-0433_S_map.fits
wmodel /vlbi/uf001/uva//J0736-0433_S_map.mod
! Writing 482 model components to file: /vlbi/uf001/uva//J0736-0433_S_map.mod
wobs   /vlbi/uf001/uva//J0736-0433_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0736-0433_S_uvs.fits
wwins  /vlbi/uf001/uva//J0736-0433_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0736-0433_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.11135 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000160879 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.433439 0.433439 0.866879 1.73376 3.46752 6.93503 13.8701 27.7401 55.4803
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.111 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  692.138 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0736-0433_S_dfm.log closed on Sun Jan 13 23:31:23 2019