! Started logfile: /vlbi/uf001/uva//J0736+2604_X_dfm.log on Sun Jan 13 23:31:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0736+2604_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0736+2604_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976608 visibilities/baseline/integration-bin. ! Found source: J0736+2604 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 30060 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0736+2604_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010418Jy sigma=25.399590 ! Fit after self-cal, rms=0.888082Jy sigma=22.314056 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7153 mas, bmaj=1.452 mas, bpa=-1.1 degrees ! Estimated noise=0.315805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0837571 Jy ! Component: 100 - total flux cleaned = 0.104725 Jy ! Total flux subtracted in 100 components = 0.104725 Jy ! Clean residual min=-0.009879 max=0.034571 Jy/beam ! Clean residual mean=0.000002 rms=0.002257 Jy/beam ! Combined flux in latest and established models = 0.104725 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.104725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082977Jy sigma=2.003455 ! Fit after self-cal, rms=0.082776Jy sigma=1.999514 ! Inverting map ! Added new window around map position (-1.2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272462 Jy ! Component: 100 - total flux cleaned = 0.0375202 Jy ! Total flux subtracted in 100 components = 0.0375202 Jy ! Clean residual min=-0.007218 max=0.028024 Jy/beam ! Clean residual mean=-0.000002 rms=0.001724 Jy/beam ! Combined flux in latest and established models = 0.142245 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.142245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072430Jy sigma=1.751592 ! Fit after self-cal, rms=0.071185Jy sigma=1.719513 ! Inverting map ! Added new window around map position (-4.4, 4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246733 Jy ! Component: 100 - total flux cleaned = 0.0368406 Jy ! Total flux subtracted in 100 components = 0.0368406 Jy ! Clean residual min=-0.004706 max=0.006837 Jy/beam ! Clean residual mean=-0.000001 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.179085 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.179085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060091Jy sigma=1.440818 ! Fit after self-cal, rms=0.059465Jy sigma=1.425780 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959689 Jy ! Component: 100 - total flux cleaned = 0.0163689 Jy ! Total flux subtracted in 100 components = 0.0163689 Jy ! Clean residual min=-0.003825 max=0.004975 Jy/beam ! Clean residual mean=-0.000002 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.195454 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.195454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057020Jy sigma=1.365801 ! Fit after self-cal, rms=0.056941Jy sigma=1.364093 ! Inverting map ! Added new window around map position (-4.4, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058013 Jy ! Component: 100 - total flux cleaned = 0.0100773 Jy ! Total flux subtracted in 100 components = 0.0100773 Jy ! Clean residual min=-0.003118 max=0.003573 Jy/beam ! Clean residual mean=-0.000002 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.205532 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.205532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055919Jy sigma=1.339272 ! Fit after self-cal, rms=0.055893Jy sigma=1.338680 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9084 mas, bmaj=1.784 mas, bpa=-1.317 degrees ! Estimated noise=0.170359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618229 Jy ! Component: 100 - total flux cleaned = 0.0109178 Jy ! Component: 150 - total flux cleaned = 0.0147437 Jy ! Component: 200 - total flux cleaned = 0.0179036 Jy ! Total flux subtracted in 200 components = 0.0179036 Jy ! Clean residual min=-0.003030 max=0.004155 Jy/beam ! Clean residual mean=-0.000004 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.223435 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 68 components and 0.223435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054823Jy sigma=1.313363 ! Fit after self-cal, rms=0.054787Jy sigma=1.312329 ! Inverting map ! Added new window around map position (-2.4, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410373 Jy ! Component: 100 - total flux cleaned = 0.00702936 Jy ! Component: 150 - total flux cleaned = 0.00952487 Jy ! Component: 200 - total flux cleaned = 0.0116835 Jy ! Total flux subtracted in 200 components = 0.0116835 Jy ! Clean residual min=-0.002744 max=0.003609 Jy/beam ! Clean residual mean=-0.000003 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.235119 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 90 components and 0.235119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054334Jy sigma=1.300860 ! Fit after self-cal, rms=0.054319Jy sigma=1.300457 ! Inverting map ! Added new window around map position (1.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385961 Jy ! Component: 100 - total flux cleaned = 0.006136 Jy ! Component: 150 - total flux cleaned = 0.00772923 Jy ! Component: 200 - total flux cleaned = 0.00913972 Jy ! Total flux subtracted in 200 components = 0.00913972 Jy ! Clean residual min=-0.002595 max=0.002996 Jy/beam ! Clean residual mean=-0.000003 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.244259 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 115 components and 0.244259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053977Jy sigma=1.291393 ! Fit after self-cal, rms=0.053951Jy sigma=1.290760 ! Inverting map ! Added new window around map position (-1, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275237 Jy ! Component: 100 - total flux cleaned = 0.00459997 Jy ! Component: 150 - total flux cleaned = 0.0062038 Jy ! Component: 200 - total flux cleaned = 0.00763847 Jy ! Total flux subtracted in 200 components = 0.00763847 Jy ! Clean residual min=-0.002260 max=0.002000 Jy/beam ! Clean residual mean=-0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.251897 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 134 components and 0.251897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053760Jy sigma=1.285462 ! Fit after self-cal, rms=0.053754Jy sigma=1.285364 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9084 x 1.784 at -1.317 degrees (North through East) ! Clean map min=-0.0021095 max=0.11165 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.95 KP 0.99 ! LA 1.02 MK 0.99 NL 1.07 OV 0.96 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.97 KP 0.96 ! LA 1.01 MK 0.96 NL 1.07 OV 0.96 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.98 KP 0.98 ! LA 1.00 MK 0.98 NL 1.07 OV 0.94 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.94 KP 1.00 ! LA 1.01 MK 1.01 NL 1.06 OV 0.94 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.95 KP 1.00 ! LA 1.03 MK 0.95 NL 1.07 OV 0.93 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.94 KP 1.01 ! LA 1.01 MK 1.01 NL 1.05 OV 0.93 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.98 KP 0.98 ! LA 1.02 MK 0.97 NL 1.06 OV 0.95 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.96 KP 1.00 ! LA 0.99 MK 0.98 NL 1.06 OV 0.93 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.96 KP 0.99 ! LA 1.01 MK 1.00 NL 1.06 OV 0.94 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.94 KP 1.00 ! LA 1.01 MK 0.98 NL 1.08 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.98 KP 1.01 ! LA 1.01 MK 1.02 NL 1.07 OV 0.93 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.96 KP 0.98 ! LA 1.02 MK 0.97 NL 1.07 OV 0.94 ! PT 0.97 SC 0.95 ! ! ! Fit before self-cal, rms=0.053754Jy sigma=1.285364 ! Fit after self-cal, rms=0.052683Jy sigma=1.272468 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9044 mas, bmaj=1.79 mas, bpa=-1.54 degrees ! Estimated noise=0.169209 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117198 Jy ! Component: 100 - total flux cleaned = -0.00111661 Jy ! Component: 150 - total flux cleaned = -0.00107608 Jy ! Component: 200 - total flux cleaned = -0.00100758 Jy ! Total flux subtracted in 200 components = -0.00100758 Jy ! Clean residual min=-0.001259 max=0.001180 Jy/beam ! Clean residual mean=-0.000001 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.250889 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 166 components and 0.25089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052611Jy sigma=1.270563 ! Fit after self-cal, rms=0.052619Jy sigma=1.270440 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052619Jy sigma=1.270440 ! Fit after self-cal, rms=0.052632Jy sigma=1.266358 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9045 mas, bmaj=1.788 mas, bpa=-1.676 degrees ! Estimated noise=0.169298 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243137 Jy ! Component: 100 - total flux cleaned = -0.000467645 Jy ! Component: 150 - total flux cleaned = -0.000525774 Jy ! Component: 200 - total flux cleaned = -0.000552449 Jy ! Total flux subtracted in 200 components = -0.000552449 Jy ! Clean residual min=-0.001053 max=0.001028 Jy/beam ! Clean residual mean=-0.000001 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.250337 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 186 components and 0.250337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052601Jy sigma=1.265509 ! Fit after self-cal, rms=0.052606Jy sigma=1.265464 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.18017e-05 Jy ! Component: 100 - total flux cleaned = 4.40077e-05 Jy ! Component: 150 - total flux cleaned = 4.48804e-05 Jy ! Component: 200 - total flux cleaned = 6.38146e-05 Jy ! Total flux subtracted in 200 components = 6.38146e-05 Jy ! Clean residual min=-0.001014 max=0.001006 Jy/beam ! Clean residual mean=-0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.250401 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 196 components and 0.250401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052592Jy sigma=1.265092 ! Fit after self-cal, rms=0.052592Jy sigma=1.265080 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052592Jy sigma=1.265080 ! Fit after self-cal, rms=0.052581Jy sigma=1.264947 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9039 mas, bmaj=1.788 mas, bpa=-1.699 degrees ! Estimated noise=0.169259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000604963 Jy ! Component: 100 - total flux cleaned = -0.00083065 Jy ! Component: 150 - total flux cleaned = -0.000865962 Jy ! Component: 200 - total flux cleaned = -0.00086539 Jy ! Total flux subtracted in 200 components = -0.00086539 Jy ! Clean residual min=-0.000990 max=0.000996 Jy/beam ! Clean residual mean=-0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.249536 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 205 components and 0.249536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052567Jy sigma=1.264604 ! Fit after self-cal, rms=0.052569Jy sigma=1.264595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.4, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430266 Jy ! Component: 100 - total flux cleaned = 0.000319437 Jy ! Component: 150 - total flux cleaned = 0.000319792 Jy ! Component: 200 - total flux cleaned = 0.0003204 Jy ! Total flux subtracted in 200 components = 0.0003204 Jy ! Clean residual min=-0.000941 max=0.000929 Jy/beam ! Clean residual mean=-0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.249856 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 214 components and 0.249856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052548Jy sigma=1.264116 ! Fit after self-cal, rms=0.052548Jy sigma=1.264094 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052548Jy sigma=1.264094 ! Fit after self-cal, rms=0.052513Jy sigma=1.264032 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.063 mas, bmaj=2.762 mas, bpa=-1.787 degrees ! Estimated noise=0.215685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169616 Jy ! Component: 100 - total flux cleaned = -0.000309351 Jy ! Component: 150 - total flux cleaned = -0.000485035 Jy ! Component: 200 - total flux cleaned = -0.000619707 Jy ! Total flux subtracted in 200 components = -0.000619707 Jy ! Clean residual min=-0.000957 max=0.000819 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.249236 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 233 components and 0.249236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052508Jy sigma=1.263834 ! Fit after self-cal, rms=0.052508Jy sigma=1.263824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.00178e-05 Jy ! Component: 100 - total flux cleaned = -0.000126199 Jy ! Component: 150 - total flux cleaned = -0.000151668 Jy ! Component: 200 - total flux cleaned = -0.000186842 Jy ! Total flux subtracted in 200 components = -0.000186842 Jy ! Clean residual min=-0.000925 max=0.000826 Jy/beam ! Clean residual mean=-0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.249049 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 243 components and 0.249049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052507Jy sigma=1.263764 ! Fit after self-cal, rms=0.052507Jy sigma=1.263758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9034 mas, bmaj=1.789 mas, bpa=-1.735 degrees ! Estimated noise=0.169206 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9034 x 1.789 at -1.735 degrees (North through East) ! Clean map min=-0.00081245 max=0.11101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7104 mas, bmaj=1.451 mas, bpa=-1.497 degrees ! Estimated noise=0.312638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0846633 Jy ! Component: 100 - total flux cleaned = 0.122282 Jy ! Component: 150 - total flux cleaned = 0.146886 Jy ! Component: 200 - total flux cleaned = 0.163515 Jy ! Total flux subtracted in 200 components = 0.163515 Jy ! Clean residual min=-0.004444 max=0.009357 Jy/beam ! Clean residual mean=-0.000000 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.163515 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.163515 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9034 mas, bmaj=1.789 mas, bpa=-1.735 degrees ! Estimated noise=0.169206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168824 Jy ! Component: 100 - total flux cleaned = 0.0286515 Jy ! Component: 150 - total flux cleaned = 0.0372091 Jy ! Component: 200 - total flux cleaned = 0.0435781 Jy ! Total flux subtracted in 200 components = 0.0435781 Jy ! Clean residual min=-0.002017 max=0.003689 Jy/beam ! Clean residual mean=-0.000003 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.207093 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 46 components and 0.207093 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499511 Jy ! Component: 100 - total flux cleaned = 0.00911464 Jy ! Component: 150 - total flux cleaned = 0.0125924 Jy ! Component: 200 - total flux cleaned = 0.01558 Jy ! Total flux subtracted in 200 components = 0.01558 Jy ! Clean residual min=-0.001453 max=0.001954 Jy/beam ! Clean residual mean=-0.000002 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.222673 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 77 components and 0.222673 Jy ! Inverting map ! Added new window around map position (-0.8, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263556 Jy ! Component: 100 - total flux cleaned = 0.0049588 Jy ! Component: 150 - total flux cleaned = 0.00701674 Jy ! Component: 200 - total flux cleaned = 0.00885735 Jy ! Total flux subtracted in 200 components = 0.00885735 Jy ! Clean residual min=-0.001186 max=0.001465 Jy/beam ! Clean residual mean=-0.000002 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.23153 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 98 components and 0.23153 Jy ! Inverting map ! Added new window around map position (1, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171002 Jy ! Component: 100 - total flux cleaned = 0.00321843 Jy ! Component: 150 - total flux cleaned = 0.00458365 Jy ! Component: 200 - total flux cleaned = 0.00577339 Jy ! Total flux subtracted in 200 components = 0.00577339 Jy ! Clean residual min=-0.001047 max=0.001184 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.237304 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 129 components and 0.237304 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.063 mas, bmaj=2.762 mas, bpa=-1.787 degrees ! Estimated noise=0.215685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220486 Jy ! Component: 100 - total flux cleaned = 0.00393172 Jy ! Component: 150 - total flux cleaned = 0.00533066 Jy ! Component: 200 - total flux cleaned = 0.00625781 Jy ! Total flux subtracted in 200 components = 0.00625781 Jy ! Clean residual min=-0.001237 max=0.001195 Jy/beam ! Clean residual mean=-0.000002 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.243562 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677309 Jy ! Component: 100 - total flux cleaned = 0.00130488 Jy ! Component: 150 - total flux cleaned = 0.00182514 Jy ! Component: 200 - total flux cleaned = 0.00223366 Jy ! Total flux subtracted in 200 components = 0.00223366 Jy ! Clean residual min=-0.001106 max=0.000932 Jy/beam ! Clean residual mean=-0.000002 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.245795 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 209 components and 0.245795 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9034 mas, bmaj=1.789 mas, bpa=-1.735 degrees ! Estimated noise=0.169206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268901 Jy ! Component: 100 - total flux cleaned = 0.000161973 Jy ! Component: 150 - total flux cleaned = 0.000162098 Jy ! Component: 200 - total flux cleaned = 0.0001619 Jy ! Total flux subtracted in 200 components = 0.0001619 Jy ! Clean residual min=-0.000976 max=0.000994 Jy/beam ! Clean residual mean=-0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.245957 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 236 components and 0.245957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052509Jy sigma=1.264015 ! Fit after self-cal, rms=0.052503Jy sigma=1.263897 wmodel J0736+2604_X_map.mod ! Writing 236 model components to file: J0736+2604_X_map.mod wobs J0736+2604_X_uvs.fits ! Writing UV FITS file: J0736+2604_X_uvs.fits wwins J0736+2604_X_map.win ! wwins: Wrote 10 windows to J0736+2604_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190071 Jy ! Component: 100 - total flux cleaned = 0.000270951 Jy ! Component: 150 - total flux cleaned = 0.000271448 Jy ! Component: 200 - total flux cleaned = 0.000271795 Jy ! Component: 250 - total flux cleaned = 0.000243598 Jy ! Component: 300 - total flux cleaned = 0.000271705 Jy ! Component: 350 - total flux cleaned = 0.000299119 Jy ! Component: 400 - total flux cleaned = 0.000299016 Jy ! Component: 450 - total flux cleaned = 0.000285936 Jy ! Component: 500 - total flux cleaned = 0.000246974 Jy ! Component: 550 - total flux cleaned = 0.000234074 Jy ! Component: 600 - total flux cleaned = 0.0001839 Jy ! Component: 650 - total flux cleaned = 0.000159261 Jy ! Component: 700 - total flux cleaned = 0.000147176 Jy ! Component: 750 - total flux cleaned = 0.000135059 Jy ! Component: 800 - total flux cleaned = 7.54102e-05 Jy ! Component: 850 - total flux cleaned = 2.86342e-05 Jy ! Component: 900 - total flux cleaned = 1.71069e-05 Jy ! Component: 950 - total flux cleaned = 1.70177e-05 Jy ! Component: 1000 - total flux cleaned = -1.69815e-05 Jy ! Component: 1050 - total flux cleaned = -5.79506e-06 Jy ! Component: 1100 - total flux cleaned = -1.67453e-05 Jy ! Component: 1150 - total flux cleaned = -1.71206e-05 Jy ! Component: 1200 - total flux cleaned = -3.87939e-05 Jy ! Component: 1250 - total flux cleaned = -9.2608e-05 Jy ! Component: 1300 - total flux cleaned = -0.000103086 Jy ! Component: 1350 - total flux cleaned = -8.19322e-05 Jy ! Component: 1400 - total flux cleaned = -9.25361e-05 Jy ! Component: 1450 - total flux cleaned = -0.000123611 Jy ! Component: 1500 - total flux cleaned = -0.000102879 Jy ! Component: 1550 - total flux cleaned = -0.000113177 Jy ! Component: 1600 - total flux cleaned = -9.29318e-05 Jy ! Component: 1650 - total flux cleaned = -0.000112938 Jy ! Component: 1700 - total flux cleaned = -0.000132896 Jy ! Component: 1750 - total flux cleaned = -0.000142782 Jy ! Component: 1800 - total flux cleaned = -0.000113248 Jy ! Component: 1850 - total flux cleaned = -0.00013274 Jy ! Component: 1900 - total flux cleaned = -0.000113519 Jy ! Component: 1950 - total flux cleaned = -9.43571e-05 Jy ! Component: 2000 - total flux cleaned = -0.00013261 Jy ! Component: 2050 - total flux cleaned = -0.000123045 Jy ! Component: 2100 - total flux cleaned = -0.000151273 Jy ! Component: 2150 - total flux cleaned = -0.000141947 Jy ! Component: 2200 - total flux cleaned = -0.000132678 Jy ! Component: 2250 - total flux cleaned = -0.000123536 Jy ! Component: 2300 - total flux cleaned = -0.000169326 Jy ! Component: 2350 - total flux cleaned = -0.00015118 Jy ! Component: 2400 - total flux cleaned = -0.000124125 Jy ! Component: 2450 - total flux cleaned = -0.000124127 Jy ! Component: 2500 - total flux cleaned = -0.000115265 Jy ! Component: 2550 - total flux cleaned = -0.000124045 Jy ! Component: 2600 - total flux cleaned = -0.000150361 Jy ! Component: 2650 - total flux cleaned = -0.00014169 Jy ! Component: 2700 - total flux cleaned = -0.00013304 Jy ! Component: 2750 - total flux cleaned = -0.000107051 Jy ! Component: 2800 - total flux cleaned = -0.000132797 Jy ! Component: 2850 - total flux cleaned = -9.86447e-05 Jy ! Component: 2900 - total flux cleaned = -8.16108e-05 Jy ! Component: 2950 - total flux cleaned = -8.99735e-05 Jy ! Component: 3000 - total flux cleaned = -9.00319e-05 Jy ! Component: 3050 - total flux cleaned = -9.8375e-05 Jy ! Component: 3100 - total flux cleaned = -9.83547e-05 Jy ! Component: 3150 - total flux cleaned = -0.000106604 Jy ! Component: 3200 - total flux cleaned = -0.000106526 Jy ! Component: 3250 - total flux cleaned = -0.000106506 Jy ! Component: 3300 - total flux cleaned = -8.21562e-05 Jy ! Component: 3350 - total flux cleaned = -9.02045e-05 Jy ! Component: 3400 - total flux cleaned = -4.20691e-05 Jy ! Component: 3450 - total flux cleaned = -6.60176e-05 Jy ! Component: 3500 - total flux cleaned = -5.79892e-05 Jy ! Component: 3550 - total flux cleaned = -8.17506e-05 Jy ! Component: 3600 - total flux cleaned = -6.60262e-05 Jy ! Component: 3650 - total flux cleaned = -5.0357e-05 Jy ! Component: 3700 - total flux cleaned = -1.14327e-05 Jy ! Component: 3750 - total flux cleaned = -1.14582e-05 Jy ! Component: 3800 - total flux cleaned = -1.15176e-05 Jy ! Component: 3850 - total flux cleaned = -1.15386e-05 Jy ! Component: 3900 - total flux cleaned = -1.91717e-05 Jy ! Component: 3950 - total flux cleaned = -2.67058e-05 Jy ! Component: 4000 - total flux cleaned = -1.15957e-05 Jy ! Component: 4050 - total flux cleaned = -1.91398e-05 Jy ! Total flux subtracted in 4096 components = 3.31847e-06 Jy ! Clean residual min=-0.000405 max=0.000438 Jy/beam ! Clean residual mean=-0.000000 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.24596 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 568 components and 0.24596 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0736+2604_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9034 x 1.789 at -1.735 degrees (North through East) ! Clean map min=-0.00065714 max=0.11198 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0736+2604_X_map.fits wmodel /vlbi/uf001/uva//J0736+2604_X_map.mod ! Writing 568 model components to file: /vlbi/uf001/uva//J0736+2604_X_map.mod wobs /vlbi/uf001/uva//J0736+2604_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0736+2604_X_uvs.fits wwins /vlbi/uf001/uva//J0736+2604_X_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uva//J0736+2604_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.111982 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000129231 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.34621 0.34621 0.69242 1.38484 2.76968 5.53936 11.0787 22.1574 44.3149 88.6297 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.111 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 866.526 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0736+2604_X_dfm.log closed on Sun Jan 13 23:31:06 2019