! Started logfile: /vlbi/uf001/uva//J0736+2604_S_dfm.log on Sun Jan 13 23:30:54 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0736+2604_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0736+2604_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.976608 visibilities/baseline/integration-bin.
! Found source: J0736+2604
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7515 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0736+2604_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008991Jy  sigma=23.239796
! Fit after  self-cal, rms=0.845396Jy  sigma=19.371082
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.839 mas, bmaj=6.048 mas, bpa=-2.031 degrees
! Estimated noise=0.519304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116746 Jy
! Component: 100  -  total flux cleaned = 0.169656 Jy
! Total flux subtracted in 100 components = 0.169656 Jy
! Clean residual min=-0.012140 max=0.037440 Jy/beam
! Clean residual mean=-0.000029 rms=0.003725 Jy/beam
! Combined flux in latest and established models = 0.169656 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.169656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097310Jy  sigma=2.115279
! Fit after  self-cal, rms=0.096722Jy  sigma=2.104683
! Inverting map 
! Added new window around map position (-3.5, 4.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386174 Jy
! Component: 100  -  total flux cleaned = 0.0628649 Jy
! Total flux subtracted in 100 components = 0.0628649 Jy
! Clean residual min=-0.012129 max=0.020392 Jy/beam
! Clean residual mean=-0.000007 rms=0.002539 Jy/beam
! Combined flux in latest and established models = 0.232521 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 18 components and 0.232521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077525Jy  sigma=1.610130
! Fit after  self-cal, rms=0.077116Jy  sigma=1.598660
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113925 Jy
! Component: 100  -  total flux cleaned = 0.0190922 Jy
! Total flux subtracted in 100 components = 0.0190922 Jy
! Clean residual min=-0.009092 max=0.013383 Jy/beam
! Clean residual mean=-0.000001 rms=0.002129 Jy/beam
! Combined flux in latest and established models = 0.251613 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 32 components and 0.251613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072371Jy  sigma=1.480017
! Fit after  self-cal, rms=0.072109Jy  sigma=1.474513
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.405 mas, bmaj=6.81 mas, bpa=-2.605 degrees
! Estimated noise=0.37462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121189 Jy
! Component: 100  -  total flux cleaned = 0.0157728 Jy
! Component: 150  -  total flux cleaned = 0.0189539 Jy
! Component: 200  -  total flux cleaned = 0.0206019 Jy
! Total flux subtracted in 200 components = 0.0206019 Jy
! Clean residual min=-0.005856 max=0.007235 Jy/beam
! Clean residual mean=0.000007 rms=0.001392 Jy/beam
! Combined flux in latest and established models = 0.272215 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 53 components and 0.272215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069541Jy  sigma=1.413398
! Fit after  self-cal, rms=0.069239Jy  sigma=1.407781
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.405 x 6.81 at -2.605 degrees (North through East)
! Clean map  min=-0.008281  max=0.13927 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.02     KP        0.99     
!   LA        0.96     MK        0.97     NL        1.03     OV        0.98     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        1.04     KP        0.99     
!   LA        0.94     MK        1.02     NL        1.02     OV        0.95     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.05     HN        1.01     KP        0.99     
!   LA        0.94     MK        1.02     NL        1.01     OV        1.02     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.069239Jy  sigma=1.407781
! Fit after  self-cal, rms=0.067392Jy  sigma=1.392495
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.411 mas, bmaj=6.816 mas, bpa=-2.117 degrees
! Estimated noise=0.369651 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141277 Jy
! Component: 100  -  total flux cleaned = -0.00127596 Jy
! Component: 150  -  total flux cleaned = -0.00149658 Jy
! Component: 200  -  total flux cleaned = -0.00159097 Jy
! Total flux subtracted in 200 components = -0.00159097 Jy
! Clean residual min=-0.006171 max=0.004819 Jy/beam
! Clean residual mean=0.000006 rms=0.001197 Jy/beam
! Combined flux in latest and established models = 0.270624 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.270624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066777Jy  sigma=1.379549
! Fit after  self-cal, rms=0.066575Jy  sigma=1.376768
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066575Jy  sigma=1.376768
! Fit after  self-cal, rms=0.065083Jy  sigma=1.344399
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.393 mas, bmaj=6.797 mas, bpa=-2.264 degrees
! Estimated noise=0.370156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113738 Jy
! Component: 100  -  total flux cleaned = 0.00114636 Jy
! Component: 150  -  total flux cleaned = 0.000855397 Jy
! Component: 200  -  total flux cleaned = 0.000609067 Jy
! Total flux subtracted in 200 components = 0.000609067 Jy
! Clean residual min=-0.006921 max=0.004180 Jy/beam
! Clean residual mean=0.000002 rms=0.000991 Jy/beam
! Combined flux in latest and established models = 0.271233 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.271233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064772Jy  sigma=1.339868
! Fit after  self-cal, rms=0.064721Jy  sigma=1.338472
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000379181 Jy
! Component: 100  -  total flux cleaned = 0.00025 Jy
! Component: 150  -  total flux cleaned = 8.11616e-05 Jy
! Component: 200  -  total flux cleaned = -2.36031e-05 Jy
! Total flux subtracted in 200 components = -2.36031e-05 Jy
! Clean residual min=-0.006639 max=0.004094 Jy/beam
! Clean residual mean=0.000001 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.271209 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.271209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064565Jy  sigma=1.335493
! Fit after  self-cal, rms=0.064507Jy  sigma=1.334553
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064507Jy  sigma=1.334553
! Fit after  self-cal, rms=0.064310Jy  sigma=1.334254
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.388 mas, bmaj=6.795 mas, bpa=-2.308 degrees
! Estimated noise=0.369527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000535764 Jy
! Component: 100  -  total flux cleaned = 0.000471015 Jy
! Component: 150  -  total flux cleaned = 0.000525095 Jy
! Component: 200  -  total flux cleaned = 0.000424573 Jy
! Total flux subtracted in 200 components = 0.000424573 Jy
! Clean residual min=-0.006433 max=0.004033 Jy/beam
! Clean residual mean=0.000001 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.271634 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 81 components and 0.271634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064169Jy  sigma=1.331364
! Fit after  self-cal, rms=0.064109Jy  sigma=1.330360
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109526 Jy
! Component: 100  -  total flux cleaned = 4.5851e-05 Jy
! Component: 150  -  total flux cleaned = -6.03476e-06 Jy
! Component: 200  -  total flux cleaned = -5.28318e-05 Jy
! Total flux subtracted in 200 components = -5.28318e-05 Jy
! Clean residual min=-0.006261 max=0.003955 Jy/beam
! Clean residual mean=0.000001 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.271581 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.271581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063978Jy  sigma=1.327723
! Fit after  self-cal, rms=0.063916Jy  sigma=1.326739
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063916Jy  sigma=1.326739
! Fit after  self-cal, rms=0.063711Jy  sigma=1.326662
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.239 mas, bmaj=10.15 mas, bpa=-4.19 degrees
! Estimated noise=0.467839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000636828 Jy
! Component: 100  -  total flux cleaned = -0.000842974 Jy
! Component: 150  -  total flux cleaned = -0.000943794 Jy
! Component: 200  -  total flux cleaned = -0.00101506 Jy
! Total flux subtracted in 200 components = -0.00101506 Jy
! Clean residual min=-0.003655 max=0.002954 Jy/beam
! Clean residual mean=0.000000 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.270566 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 0.270566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063614Jy  sigma=1.325015
! Fit after  self-cal, rms=0.063489Jy  sigma=1.323058
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000133065 Jy
! Component: 100  -  total flux cleaned = -0.000119454 Jy
! Component: 150  -  total flux cleaned = -0.000201179 Jy
! Component: 200  -  total flux cleaned = -0.000229565 Jy
! Total flux subtracted in 200 components = -0.000229565 Jy
! Clean residual min=-0.003449 max=0.002924 Jy/beam
! Clean residual mean=-0.000000 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.270336 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 99 components and 0.270336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063411Jy  sigma=1.321691
! Fit after  self-cal, rms=0.063291Jy  sigma=1.319840
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=6.791 mas, bpa=-2.368 degrees
! Estimated noise=0.368942 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 6.791 at -2.368 degrees (North through East)
! Clean map  min=-0.008375  max=0.13344 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.815 mas, bmaj=6.029 mas, bpa=-1.681 degrees
! Estimated noise=0.510239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120466 Jy
! Component: 100  -  total flux cleaned = 0.17443 Jy
! Component: 150  -  total flux cleaned = 0.207304 Jy
! Component: 200  -  total flux cleaned = 0.228343 Jy
! Total flux subtracted in 200 components = 0.228343 Jy
! Clean residual min=-0.011876 max=0.012409 Jy/beam
! Clean residual mean=-0.000011 rms=0.001997 Jy/beam
! Combined flux in latest and established models = 0.228343 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.228343 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=6.791 mas, bpa=-2.368 degrees
! Estimated noise=0.368942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181912 Jy
! Component: 100  -  total flux cleaned = 0.0245214 Jy
! Component: 150  -  total flux cleaned = 0.0288027 Jy
! Component: 200  -  total flux cleaned = 0.0322762 Jy
! Total flux subtracted in 200 components = 0.0322762 Jy
! Clean residual min=-0.004568 max=0.005445 Jy/beam
! Clean residual mean=-0.000003 rms=0.001010 Jy/beam
! Combined flux in latest and established models = 0.260619 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 54 components and 0.260619 Jy
! Inverting map 
! Added new window around map position (3.5, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112435 Jy
! Component: 100  -  total flux cleaned = 0.00189029 Jy
! Component: 150  -  total flux cleaned = 0.00268088 Jy
! Component: 200  -  total flux cleaned = 0.00359109 Jy
! Total flux subtracted in 200 components = 0.00359109 Jy
! Clean residual min=-0.004097 max=0.003753 Jy/beam
! Clean residual mean=-0.000001 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.26421 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 67 components and 0.26421 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.239 mas, bmaj=10.15 mas, bpa=-4.19 degrees
! Estimated noise=0.467839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283729 Jy
! Component: 100  -  total flux cleaned = 0.00360112 Jy
! Component: 150  -  total flux cleaned = 0.00387712 Jy
! Component: 200  -  total flux cleaned = 0.00401889 Jy
! Total flux subtracted in 200 components = 0.00401889 Jy
! Clean residual min=-0.002406 max=0.002765 Jy/beam
! Clean residual mean=-0.000001 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.268229 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167103 Jy
! Component: 100  -  total flux cleaned = 0.000315121 Jy
! Component: 150  -  total flux cleaned = 0.000446009 Jy
! Component: 200  -  total flux cleaned = 0.000534019 Jy
! Total flux subtracted in 200 components = 0.000534019 Jy
! Clean residual min=-0.002345 max=0.002730 Jy/beam
! Clean residual mean=-0.000001 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.268763 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 102 components and 0.268763 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=6.791 mas, bpa=-2.368 degrees
! Estimated noise=0.368942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000360763 Jy
! Component: 100  -  total flux cleaned = -0.000355674 Jy
! Component: 150  -  total flux cleaned = -0.000360366 Jy
! Component: 200  -  total flux cleaned = -0.000295337 Jy
! Total flux subtracted in 200 components = -0.000295337 Jy
! Clean residual min=-0.003556 max=0.003262 Jy/beam
! Clean residual mean=-0.000001 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.268468 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.268468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062655Jy  sigma=1.306656
! Fit after  self-cal, rms=0.062495Jy  sigma=1.303041
wmodel J0736+2604_S_map.mod
! Writing 124 model components to file: J0736+2604_S_map.mod
wobs   J0736+2604_S_uvs.fits
! Writing UV FITS file: J0736+2604_S_uvs.fits
wwins  J0736+2604_S_map.win
! wwins: Wrote 3 windows to J0736+2604_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000507552 Jy
! Component: 100  -  total flux cleaned = -0.000508167 Jy
! Component: 150  -  total flux cleaned = -0.000509187 Jy
! Component: 200  -  total flux cleaned = -0.000299347 Jy
! Component: 250  -  total flux cleaned = -0.000197134 Jy
! Component: 300  -  total flux cleaned = -0.000147548 Jy
! Component: 350  -  total flux cleaned = -1.82689e-06 Jy
! Component: 400  -  total flux cleaned = -1.35068e-06 Jy
! Component: 450  -  total flux cleaned = -9.23157e-05 Jy
! Component: 500  -  total flux cleaned = 4.20106e-05 Jy
! Component: 550  -  total flux cleaned = 8.47566e-05 Jy
! Component: 600  -  total flux cleaned = 8.50656e-05 Jy
! Component: 650  -  total flux cleaned = 0.000295918 Jy
! Component: 700  -  total flux cleaned = 0.000378558 Jy
! Component: 750  -  total flux cleaned = 0.000661791 Jy
! Component: 800  -  total flux cleaned = 0.00078016 Jy
! Component: 850  -  total flux cleaned = 0.000974585 Jy
! Component: 900  -  total flux cleaned = 0.000973418 Jy
! Component: 950  -  total flux cleaned = 0.00101108 Jy
! Component: 1000  -  total flux cleaned = 0.000973909 Jy
! Component: 1050  -  total flux cleaned = 0.00108343 Jy
! Component: 1100  -  total flux cleaned = 0.00115459 Jy
! Component: 1150  -  total flux cleaned = 0.00118911 Jy
! Component: 1200  -  total flux cleaned = 0.00125881 Jy
! Component: 1250  -  total flux cleaned = 0.0012244 Jy
! Component: 1300  -  total flux cleaned = 0.00132554 Jy
! Component: 1350  -  total flux cleaned = 0.00135824 Jy
! Component: 1400  -  total flux cleaned = 0.00132541 Jy
! Component: 1450  -  total flux cleaned = 0.00139099 Jy
! Component: 1500  -  total flux cleaned = 0.0014875 Jy
! Component: 1550  -  total flux cleaned = 0.00145558 Jy
! Component: 1600  -  total flux cleaned = 0.00158103 Jy
! Component: 1650  -  total flux cleaned = 0.00158138 Jy
! Component: 1700  -  total flux cleaned = 0.0016126 Jy
! Component: 1750  -  total flux cleaned = 0.00170364 Jy
! Component: 1800  -  total flux cleaned = 0.00179337 Jy
! Component: 1850  -  total flux cleaned = 0.00194109 Jy
! Component: 1900  -  total flux cleaned = 0.00194046 Jy
! Component: 1950  -  total flux cleaned = 0.00202717 Jy
! Component: 2000  -  total flux cleaned = 0.0019987 Jy
! Component: 2050  -  total flux cleaned = 0.00199946 Jy
! Component: 2100  -  total flux cleaned = 0.00211161 Jy
! Component: 2150  -  total flux cleaned = 0.00222231 Jy
! Component: 2200  -  total flux cleaned = 0.00222219 Jy
! Component: 2250  -  total flux cleaned = 0.00233065 Jy
! Component: 2300  -  total flux cleaned = 0.00235763 Jy
! Component: 2350  -  total flux cleaned = 0.00243787 Jy
! Component: 2400  -  total flux cleaned = 0.0025433 Jy
! Component: 2450  -  total flux cleaned = 0.00251718 Jy
! Component: 2500  -  total flux cleaned = 0.00259535 Jy
! Component: 2550  -  total flux cleaned = 0.00264674 Jy
! Component: 2600  -  total flux cleaned = 0.00262158 Jy
! Component: 2650  -  total flux cleaned = 0.002697 Jy
! Component: 2700  -  total flux cleaned = 0.00269683 Jy
! Component: 2750  -  total flux cleaned = 0.00277079 Jy
! Component: 2800  -  total flux cleaned = 0.00274684 Jy
! Component: 2850  -  total flux cleaned = 0.00281944 Jy
! Component: 2900  -  total flux cleaned = 0.00281965 Jy
! Component: 2950  -  total flux cleaned = 0.00286701 Jy
! Component: 3000  -  total flux cleaned = 0.00289058 Jy
! Component: 3050  -  total flux cleaned = 0.00291403 Jy
! Component: 3100  -  total flux cleaned = 0.00289124 Jy
! Component: 3150  -  total flux cleaned = 0.00293705 Jy
! Component: 3200  -  total flux cleaned = 0.00291446 Jy
! Component: 3250  -  total flux cleaned = 0.00302732 Jy
! Component: 3300  -  total flux cleaned = 0.00304986 Jy
! Component: 3350  -  total flux cleaned = 0.00313854 Jy
! Component: 3400  -  total flux cleaned = 0.0030723 Jy
! Component: 3450  -  total flux cleaned = 0.00315972 Jy
! Component: 3500  -  total flux cleaned = 0.00318123 Jy
! Component: 3550  -  total flux cleaned = 0.00311656 Jy
! Component: 3600  -  total flux cleaned = 0.00330849 Jy
! Component: 3650  -  total flux cleaned = 0.00324514 Jy
! Component: 3700  -  total flux cleaned = 0.00332897 Jy
! Component: 3750  -  total flux cleaned = 0.0033288 Jy
! Component: 3800  -  total flux cleaned = 0.00341138 Jy
! Component: 3850  -  total flux cleaned = 0.00339123 Jy
! Component: 3900  -  total flux cleaned = 0.0034115 Jy
! Component: 3950  -  total flux cleaned = 0.00347177 Jy
! Component: 4000  -  total flux cleaned = 0.00345169 Jy
! Component: 4050  -  total flux cleaned = 0.00353141 Jy
! Total flux subtracted in 4096 components = 0.00345232 Jy
! Clean residual min=-0.001158 max=0.001175 Jy/beam
! Clean residual mean=0.000000 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.27192 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 412 components and 0.27192 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0736+2604_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 6.791 at -2.368 degrees (North through East)
! Clean map  min=-0.0080702  max=0.13347 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0736+2604_S_map.fits
wmodel /vlbi/uf001/uva//J0736+2604_S_map.mod
! Writing 412 model components to file: /vlbi/uf001/uva//J0736+2604_S_map.mod
wobs   /vlbi/uf001/uva//J0736+2604_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0736+2604_S_uvs.fits
wwins  /vlbi/uf001/uva//J0736+2604_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0736+2604_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133468 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00036726 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.825501 0.825501 1.651 3.30201 6.60401 13.208 26.416 52.8321
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  363.415 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0736+2604_S_dfm.log closed on Sun Jan 13 23:30:59 2019