! Started logfile: /vlbi/uf001/uva//J0729-1320_S_dfm.log on Sun Jan 13 23:27:31 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0729-1320_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0729-1320_S_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.96627 visibilities/baseline/integration-bin.
! Found source: J0729-1320
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2922 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0729-1320_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010172Jy  sigma=16.744654
! Fit after  self-cal, rms=0.841590Jy  sigma=13.844158
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.454 mas, bmaj=6.489 mas, bpa=-5.404 degrees
! Estimated noise=1.03907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11814 Jy
! Component: 100  -  total flux cleaned = 0.157115 Jy
! Total flux subtracted in 100 components = 0.157115 Jy
! Clean residual min=-0.014736 max=0.033173 Jy/beam
! Clean residual mean=0.000019 rms=0.004342 Jy/beam
! Combined flux in latest and established models = 0.157115 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.157115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104710Jy  sigma=1.622176
! Fit after  self-cal, rms=0.104246Jy  sigma=1.615287
! Inverting map 
! Added new window around map position (3, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0322965 Jy
! Component: 100  -  total flux cleaned = 0.0502978 Jy
! Total flux subtracted in 100 components = 0.0502978 Jy
! Clean residual min=-0.010404 max=0.021472 Jy/beam
! Clean residual mean=0.000020 rms=0.002962 Jy/beam
! Combined flux in latest and established models = 0.207413 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 20 components and 0.207413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092568Jy  sigma=1.362865
! Fit after  self-cal, rms=0.091938Jy  sigma=1.351181
! Inverting map 
! Added new window around map position (2.5, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176263 Jy
! Component: 100  -  total flux cleaned = 0.0262665 Jy
! Total flux subtracted in 100 components = 0.0262665 Jy
! Clean residual min=-0.008293 max=0.014463 Jy/beam
! Clean residual mean=0.000016 rms=0.002291 Jy/beam
! Combined flux in latest and established models = 0.233679 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 34 components and 0.233679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088432Jy  sigma=1.272719
! Fit after  self-cal, rms=0.088099Jy  sigma=1.264207
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.835 mas, bmaj=7.251 mas, bpa=-4.81 degrees
! Estimated noise=0.881887 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116005 Jy
! Component: 100  -  total flux cleaned = 0.0183986 Jy
! Component: 150  -  total flux cleaned = 0.0228798 Jy
! Component: 200  -  total flux cleaned = 0.0242684 Jy
! Total flux subtracted in 200 components = 0.0242684 Jy
! Clean residual min=-0.006584 max=0.010167 Jy/beam
! Clean residual mean=0.000006 rms=0.001913 Jy/beam
! Combined flux in latest and established models = 0.257948 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 48 components and 0.257948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086511Jy  sigma=1.232548
! Fit after  self-cal, rms=0.086431Jy  sigma=1.229093
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.835 x 7.251 at -4.81 degrees (North through East)
! Clean map  min=-0.0067563  max=0.153 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        1.06     KP        0.98     LA        0.97     
!   MK        1.12     NL        1.03     OV        0.97     PT        0.95     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.89     HN        0.97     KP        1.02     LA        0.96     
!   MK        0.95     NL        1.02     OV        0.94     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     HN        1.01     KP        0.99     LA        0.95     
!   MK        0.89     NL        1.00     OV        0.95     PT        0.95     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.086431Jy  sigma=1.229093
! Fit after  self-cal, rms=0.098332Jy  sigma=1.189675
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.808 mas, bmaj=7.275 mas, bpa=-4.676 degrees
! Estimated noise=0.876976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00024849 Jy
! Component: 100  -  total flux cleaned = -0.000601717 Jy
! Component: 150  -  total flux cleaned = -0.000780813 Jy
! Component: 200  -  total flux cleaned = -0.00086096 Jy
! Total flux subtracted in 200 components = -0.00086096 Jy
! Clean residual min=-0.005113 max=0.005137 Jy/beam
! Clean residual mean=-0.000004 rms=0.001254 Jy/beam
! Combined flux in latest and established models = 0.257087 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 58 components and 0.257087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098142Jy  sigma=1.184212
! Fit after  self-cal, rms=0.098245Jy  sigma=1.183450
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098245Jy  sigma=1.183450
! Fit after  self-cal, rms=0.107201Jy  sigma=1.168222
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.797 mas, bmaj=7.283 mas, bpa=-4.196 degrees
! Estimated noise=0.876427 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00048037 Jy
! Component: 100  -  total flux cleaned = -0.000697612 Jy
! Component: 150  -  total flux cleaned = -0.000875263 Jy
! Component: 200  -  total flux cleaned = -0.000781157 Jy
! Total flux subtracted in 200 components = -0.000781157 Jy
! Clean residual min=-0.004195 max=0.004166 Jy/beam
! Clean residual mean=-0.000003 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.256306 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.256306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107119Jy  sigma=1.165767
! Fit after  self-cal, rms=0.107127Jy  sigma=1.165418
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (42.5, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262933 Jy
! Component: 100  -  total flux cleaned = 0.00309839 Jy
! Component: 150  -  total flux cleaned = 0.00332647 Jy
! Component: 200  -  total flux cleaned = 0.00342875 Jy
! Total flux subtracted in 200 components = 0.00342875 Jy
! Clean residual min=-0.003960 max=0.003389 Jy/beam
! Clean residual mean=-0.000003 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.259734 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 89 components and 0.259734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106982Jy  sigma=1.162355
! Fit after  self-cal, rms=0.106955Jy  sigma=1.162202
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106955Jy  sigma=1.162202
! Fit after  self-cal, rms=0.108383Jy  sigma=1.161671
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.792 mas, bmaj=7.295 mas, bpa=-4.165 degrees
! Estimated noise=0.872594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000624871 Jy
! Component: 100  -  total flux cleaned = -0.000472615 Jy
! Component: 150  -  total flux cleaned = -0.000238934 Jy
! Component: 200  -  total flux cleaned = -0.000109214 Jy
! Total flux subtracted in 200 components = -0.000109214 Jy
! Clean residual min=-0.003781 max=0.003379 Jy/beam
! Clean residual mean=-0.000003 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.259625 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 97 components and 0.259625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108327Jy  sigma=1.160607
! Fit after  self-cal, rms=0.108316Jy  sigma=1.160545
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.78162e-05 Jy
! Component: 100  -  total flux cleaned = 6.67583e-05 Jy
! Component: 150  -  total flux cleaned = 6.66956e-05 Jy
! Component: 200  -  total flux cleaned = 6.65915e-05 Jy
! Total flux subtracted in 200 components = 6.65915e-05 Jy
! Clean residual min=-0.003763 max=0.003385 Jy/beam
! Clean residual mean=-0.000003 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.259692 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 108 components and 0.259692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108284Jy  sigma=1.160019
! Fit after  self-cal, rms=0.108274Jy  sigma=1.160000
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108274Jy  sigma=1.160000
! Fit after  self-cal, rms=0.109032Jy  sigma=1.159770
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.662 mas, bmaj=14.09 mas, bpa=-3.348 degrees
! Estimated noise=1.25375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000319804 Jy
! Component: 100  -  total flux cleaned = 6.52308e-05 Jy
! Component: 150  -  total flux cleaned = 0.000126057 Jy
! Component: 200  -  total flux cleaned = 0.000127549 Jy
! Total flux subtracted in 200 components = 0.000127549 Jy
! Clean residual min=-0.003927 max=0.003939 Jy/beam
! Clean residual mean=-0.000004 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.259819 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 120 components and 0.259819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109013Jy  sigma=1.159919
! Fit after  self-cal, rms=0.109008Jy  sigma=1.159865
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010899 Jy
! Component: 100  -  total flux cleaned = -0.000109866 Jy
! Component: 150  -  total flux cleaned = -0.000158503 Jy
! Component: 200  -  total flux cleaned = -0.000181112 Jy
! Total flux subtracted in 200 components = -0.000181112 Jy
! Clean residual min=-0.003890 max=0.003895 Jy/beam
! Clean residual mean=-0.000004 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.259638 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 132 components and 0.259638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109002Jy  sigma=1.159902
! Fit after  self-cal, rms=0.108997Jy  sigma=1.159888
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.789 mas, bmaj=7.307 mas, bpa=-4.123 degrees
! Estimated noise=0.870832 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.789 x 7.307 at -4.123 degrees (North through East)
! Clean map  min=-0.003515  max=0.15271 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.411 mas, bmaj=6.517 mas, bpa=-4.551 degrees
! Estimated noise=1.02826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118323 Jy
! Component: 100  -  total flux cleaned = 0.166727 Jy
! Component: 150  -  total flux cleaned = 0.193887 Jy
! Component: 200  -  total flux cleaned = 0.21044 Jy
! Total flux subtracted in 200 components = 0.21044 Jy
! Clean residual min=-0.006162 max=0.008804 Jy/beam
! Clean residual mean=0.000004 rms=0.001718 Jy/beam
! Combined flux in latest and established models = 0.21044 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.21044 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.789 mas, bmaj=7.307 mas, bpa=-4.123 degrees
! Estimated noise=0.870832 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158328 Jy
! Component: 100  -  total flux cleaned = 0.0251308 Jy
! Component: 150  -  total flux cleaned = 0.0310614 Jy
! Component: 200  -  total flux cleaned = 0.0353973 Jy
! Total flux subtracted in 200 components = 0.0353973 Jy
! Clean residual min=-0.003902 max=0.003750 Jy/beam
! Clean residual mean=-0.000001 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.245838 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 64 components and 0.245838 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.662 mas, bmaj=14.09 mas, bpa=-3.348 degrees
! Estimated noise=1.25375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00531662 Jy
! Component: 100  -  total flux cleaned = 0.00819591 Jy
! Component: 150  -  total flux cleaned = 0.0101712 Jy
! Component: 200  -  total flux cleaned = 0.0108423 Jy
! Total flux subtracted in 200 components = 0.0108423 Jy
! Clean residual min=-0.004331 max=0.004224 Jy/beam
! Clean residual mean=-0.000003 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.25668 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358331 Jy
! Component: 100  -  total flux cleaned = 0.000635018 Jy
! Component: 150  -  total flux cleaned = 0.000924768 Jy
! Component: 200  -  total flux cleaned = 0.00114795 Jy
! Total flux subtracted in 200 components = 0.00114795 Jy
! Clean residual min=-0.004045 max=0.004093 Jy/beam
! Clean residual mean=-0.000003 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.257828 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 101 components and 0.257828 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.789 mas, bmaj=7.307 mas, bpa=-4.123 degrees
! Estimated noise=0.870832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000239901 Jy
! Component: 100  -  total flux cleaned = -0.000348171 Jy
! Component: 150  -  total flux cleaned = -0.000297899 Jy
! Component: 200  -  total flux cleaned = -0.000297418 Jy
! Total flux subtracted in 200 components = -0.000297418 Jy
! Clean residual min=-0.003740 max=0.003541 Jy/beam
! Clean residual mean=-0.000002 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.25753 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 118 components and 0.25753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109043Jy  sigma=1.159738
! Fit after  self-cal, rms=0.109012Jy  sigma=1.159474
wmodel J0729-1320_S_map.mod
! Writing 118 model components to file: J0729-1320_S_map.mod
wobs   J0729-1320_S_uvs.fits
! Writing UV FITS file: J0729-1320_S_uvs.fits
wwins  J0729-1320_S_map.win
! wwins: Wrote 4 windows to J0729-1320_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000865116 Jy
! Component: 100  -  total flux cleaned = -0.00175264 Jy
! Component: 150  -  total flux cleaned = -0.00247548 Jy
! Component: 200  -  total flux cleaned = -0.00300743 Jy
! Component: 250  -  total flux cleaned = -0.00336404 Jy
! Component: 300  -  total flux cleaned = -0.00360836 Jy
! Component: 350  -  total flux cleaned = -0.00379727 Jy
! Component: 400  -  total flux cleaned = -0.00389013 Jy
! Component: 450  -  total flux cleaned = -0.00420193 Jy
! Component: 500  -  total flux cleaned = -0.00446231 Jy
! Component: 550  -  total flux cleaned = -0.00484061 Jy
! Component: 600  -  total flux cleaned = -0.00508509 Jy
! Component: 650  -  total flux cleaned = -0.00528438 Jy
! Component: 700  -  total flux cleaned = -0.00540158 Jy
! Component: 750  -  total flux cleaned = -0.00563107 Jy
! Component: 800  -  total flux cleaned = -0.00570542 Jy
! Component: 850  -  total flux cleaned = -0.00596253 Jy
! Component: 900  -  total flux cleaned = -0.00599822 Jy
! Component: 950  -  total flux cleaned = -0.00610469 Jy
! Component: 1000  -  total flux cleaned = -0.0061043 Jy
! Component: 1050  -  total flux cleaned = -0.00610427 Jy
! Component: 1100  -  total flux cleaned = -0.00603694 Jy
! Component: 1150  -  total flux cleaned = -0.00610254 Jy
! Component: 1200  -  total flux cleaned = -0.00603751 Jy
! Component: 1250  -  total flux cleaned = -0.00597377 Jy
! Component: 1300  -  total flux cleaned = -0.00597419 Jy
! Component: 1350  -  total flux cleaned = -0.00594321 Jy
! Component: 1400  -  total flux cleaned = -0.00591266 Jy
! Component: 1450  -  total flux cleaned = -0.00591317 Jy
! Component: 1500  -  total flux cleaned = -0.00594351 Jy
! Component: 1550  -  total flux cleaned = -0.00600229 Jy
! Component: 1600  -  total flux cleaned = -0.00600166 Jy
! Component: 1650  -  total flux cleaned = -0.0060301 Jy
! Component: 1700  -  total flux cleaned = -0.00614378 Jy
! Component: 1750  -  total flux cleaned = -0.00614433 Jy
! Component: 1800  -  total flux cleaned = -0.00622755 Jy
! Component: 1850  -  total flux cleaned = -0.00630912 Jy
! Component: 1900  -  total flux cleaned = -0.00633589 Jy
! Component: 1950  -  total flux cleaned = -0.00638942 Jy
! Component: 2000  -  total flux cleaned = -0.00641559 Jy
! Component: 2050  -  total flux cleaned = -0.00641555 Jy
! Component: 2100  -  total flux cleaned = -0.00646735 Jy
! Component: 2150  -  total flux cleaned = -0.00649294 Jy
! Component: 2200  -  total flux cleaned = -0.00649301 Jy
! Component: 2250  -  total flux cleaned = -0.00654281 Jy
! Component: 2300  -  total flux cleaned = -0.00649355 Jy
! Component: 2350  -  total flux cleaned = -0.00656688 Jy
! Component: 2400  -  total flux cleaned = -0.00659106 Jy
! Component: 2450  -  total flux cleaned = -0.00659096 Jy
! Component: 2500  -  total flux cleaned = -0.00668645 Jy
! Component: 2550  -  total flux cleaned = -0.00661523 Jy
! Component: 2600  -  total flux cleaned = -0.00654475 Jy
! Component: 2650  -  total flux cleaned = -0.00656814 Jy
! Component: 2700  -  total flux cleaned = -0.00656826 Jy
! Component: 2750  -  total flux cleaned = -0.00652278 Jy
! Component: 2800  -  total flux cleaned = -0.00650021 Jy
! Component: 2850  -  total flux cleaned = -0.00656735 Jy
! Component: 2900  -  total flux cleaned = -0.00652295 Jy
! Component: 2950  -  total flux cleaned = -0.00654525 Jy
! Component: 3000  -  total flux cleaned = -0.00658901 Jy
! Component: 3050  -  total flux cleaned = -0.00661078 Jy
! Component: 3100  -  total flux cleaned = -0.00667539 Jy
! Component: 3150  -  total flux cleaned = -0.00663257 Jy
! Component: 3200  -  total flux cleaned = -0.00665373 Jy
! Component: 3250  -  total flux cleaned = -0.00659055 Jy
! Component: 3300  -  total flux cleaned = -0.00669481 Jy
! Component: 3350  -  total flux cleaned = -0.00661186 Jy
! Component: 3400  -  total flux cleaned = -0.00661204 Jy
! Component: 3450  -  total flux cleaned = -0.00657144 Jy
! Component: 3500  -  total flux cleaned = -0.00661173 Jy
! Component: 3550  -  total flux cleaned = -0.00667209 Jy
! Component: 3600  -  total flux cleaned = -0.00655208 Jy
! Component: 3650  -  total flux cleaned = -0.00663146 Jy
! Component: 3700  -  total flux cleaned = -0.00661159 Jy
! Component: 3750  -  total flux cleaned = -0.00659183 Jy
! Component: 3800  -  total flux cleaned = -0.00655282 Jy
! Component: 3850  -  total flux cleaned = -0.00649473 Jy
! Component: 3900  -  total flux cleaned = -0.0064755 Jy
! Component: 3950  -  total flux cleaned = -0.00651388 Jy
! Component: 4000  -  total flux cleaned = -0.00643771 Jy
! Component: 4050  -  total flux cleaned = -0.00641894 Jy
! Total flux subtracted in 4096 components = -0.0063625 Jy
! Clean residual min=-0.001173 max=0.001230 Jy/beam
! Clean residual mean=-0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.251168 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 397 components and 0.251168 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0729-1320_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.789 x 7.307 at -4.123 degrees (North through East)
! Clean map  min=-0.0030651  max=0.15404 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0729-1320_S_map.fits
wmodel /vlbi/uf001/uva//J0729-1320_S_map.mod
! Writing 397 model components to file: /vlbi/uf001/uva//J0729-1320_S_map.mod
wobs   /vlbi/uf001/uva//J0729-1320_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0729-1320_S_uvs.fits
wwins  /vlbi/uf001/uva//J0729-1320_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0729-1320_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.154042 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000323059 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.629163 0.629163 1.25833 2.51665 5.0333 10.0666 20.1332 40.2664 80.5328
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.154 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  476.824 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0729-1320_S_dfm.log closed on Sun Jan 13 23:27:36 2019