! Started logfile: /vlbi/uf001/uva//J0727+4844_S_dfm.log on Sun Jan 13 23:26:25 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0727+4844_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0727+4844_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.977778 visibilities/baseline/integration-bin.
! Found source: J0727+4844
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0727+4844_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.063446Jy  sigma=21.192068
! Fit after  self-cal, rms=0.677528Jy  sigma=13.388472
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.21 mas, bmaj=4.568 mas, bpa=5.388 degrees
! Estimated noise=0.667704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.249573 Jy
! Component: 100  -  total flux cleaned = 0.311219 Jy
! Total flux subtracted in 100 components = 0.311219 Jy
! Clean residual min=-0.008110 max=0.025293 Jy/beam
! Clean residual mean=-0.000026 rms=0.002606 Jy/beam
! Combined flux in latest and established models = 0.311219 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.311219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080514Jy  sigma=1.550491
! Fit after  self-cal, rms=0.080390Jy  sigma=1.548220
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272281 Jy
! Component: 100  -  total flux cleaned = 0.0412403 Jy
! Total flux subtracted in 100 components = 0.0412403 Jy
! Clean residual min=-0.006656 max=0.009986 Jy/beam
! Clean residual mean=-0.000013 rms=0.001641 Jy/beam
! Combined flux in latest and established models = 0.352459 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.352459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069854Jy  sigma=1.317100
! Fit after  self-cal, rms=0.069665Jy  sigma=1.313454
! Inverting map 
! Added new window around map position (0.5, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109488 Jy
! Component: 100  -  total flux cleaned = 0.0179826 Jy
! Total flux subtracted in 100 components = 0.0179826 Jy
! Clean residual min=-0.005714 max=0.006031 Jy/beam
! Clean residual mean=-0.000007 rms=0.001391 Jy/beam
! Combined flux in latest and established models = 0.370442 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.370442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067615Jy  sigma=1.271239
! Fit after  self-cal, rms=0.067528Jy  sigma=1.269338
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.742 mas, bmaj=5.242 mas, bpa=5.995 degrees
! Estimated noise=0.524295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645279 Jy
! Component: 100  -  total flux cleaned = 0.0103454 Jy
! Component: 150  -  total flux cleaned = 0.0129415 Jy
! Component: 200  -  total flux cleaned = 0.0148147 Jy
! Total flux subtracted in 200 components = 0.0148147 Jy
! Clean residual min=-0.005511 max=0.005563 Jy/beam
! Clean residual mean=-0.000003 rms=0.001259 Jy/beam
! Combined flux in latest and established models = 0.385257 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 63 components and 0.385257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066868Jy  sigma=1.254989
! Fit after  self-cal, rms=0.066838Jy  sigma=1.254236
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.742 x 5.242 at 5.995 degrees (North through East)
! Clean map  min=-0.005493  max=0.32231 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.02     
!   LA        0.95     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.02     KP        1.02     
!   LA        0.97     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.04     KP        1.02     
!   LA        0.96     MK        1.09     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.066838Jy  sigma=1.254236
! Fit after  self-cal, rms=0.065577Jy  sigma=1.231133
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.756 mas, bmaj=5.271 mas, bpa=6.685 degrees
! Estimated noise=0.522409 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00235723 Jy
! Component: 100  -  total flux cleaned = -0.00345328 Jy
! Component: 150  -  total flux cleaned = -0.00383967 Jy
! Component: 200  -  total flux cleaned = -0.00398977 Jy
! Total flux subtracted in 200 components = -0.00398977 Jy
! Clean residual min=-0.004406 max=0.004370 Jy/beam
! Clean residual mean=0.000006 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.381267 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.381267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065459Jy  sigma=1.229417
! Fit after  self-cal, rms=0.065458Jy  sigma=1.229201
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065458Jy  sigma=1.229201
! Fit after  self-cal, rms=0.064156Jy  sigma=1.170137
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.742 mas, bmaj=5.265 mas, bpa=6.354 degrees
! Estimated noise=0.521988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00036923 Jy
! Component: 100  -  total flux cleaned = -0.000313485 Jy
! Component: 150  -  total flux cleaned = -0.000264698 Jy
! Component: 200  -  total flux cleaned = -0.000180491 Jy
! Total flux subtracted in 200 components = -0.000180491 Jy
! Clean residual min=-0.002675 max=0.002510 Jy/beam
! Clean residual mean=-0.000002 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.381086 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 83 components and 0.381086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064067Jy  sigma=1.168407
! Fit after  self-cal, rms=0.064091Jy  sigma=1.168228
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.27185e-05 Jy
! Component: 100  -  total flux cleaned = 7.3128e-05 Jy
! Component: 150  -  total flux cleaned = 7.24478e-05 Jy
! Component: 200  -  total flux cleaned = 7.34687e-05 Jy
! Total flux subtracted in 200 components = 7.34687e-05 Jy
! Clean residual min=-0.002604 max=0.002439 Jy/beam
! Clean residual mean=-0.000002 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.38116 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 86 components and 0.38116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064053Jy  sigma=1.167481
! Fit after  self-cal, rms=0.064049Jy  sigma=1.167408
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064049Jy  sigma=1.167408
! Fit after  self-cal, rms=0.064318Jy  sigma=1.166942
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.74 mas, bmaj=5.268 mas, bpa=6.2 degrees
! Estimated noise=0.522642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207604 Jy
! Component: 100  -  total flux cleaned = 0.000204942 Jy
! Component: 150  -  total flux cleaned = 0.000235815 Jy
! Component: 200  -  total flux cleaned = 0.000263416 Jy
! Total flux subtracted in 200 components = 0.000263416 Jy
! Clean residual min=-0.002463 max=0.002403 Jy/beam
! Clean residual mean=-0.000003 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.381423 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 86 components and 0.381423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064281Jy  sigma=1.166270
! Fit after  self-cal, rms=0.064280Jy  sigma=1.166207
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.51711e-05 Jy
! Component: 100  -  total flux cleaned = 9.54665e-05 Jy
! Component: 150  -  total flux cleaned = 9.40217e-05 Jy
! Component: 200  -  total flux cleaned = 9.35573e-05 Jy
! Total flux subtracted in 200 components = 9.35573e-05 Jy
! Clean residual min=-0.002498 max=0.002359 Jy/beam
! Clean residual mean=-0.000003 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.381517 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 88 components and 0.381517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064261Jy  sigma=1.165864
! Fit after  self-cal, rms=0.064260Jy  sigma=1.165821
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064260Jy  sigma=1.165821
! Fit after  self-cal, rms=0.064353Jy  sigma=1.165738
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.784 mas, bmaj=8.761 mas, bpa=7.573 degrees
! Estimated noise=0.65927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228064 Jy
! Component: 100  -  total flux cleaned = 0.000209285 Jy
! Component: 150  -  total flux cleaned = 0.00019301 Jy
! Component: 200  -  total flux cleaned = 0.000166744 Jy
! Total flux subtracted in 200 components = 0.000166744 Jy
! Clean residual min=-0.002435 max=0.002745 Jy/beam
! Clean residual mean=-0.000008 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.381684 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 94 components and 0.381684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064345Jy  sigma=1.165665
! Fit after  self-cal, rms=0.064343Jy  sigma=1.165625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.85268e-05 Jy
! Component: 100  -  total flux cleaned = -5.0595e-05 Jy
! Component: 150  -  total flux cleaned = -6.16525e-05 Jy
! Component: 200  -  total flux cleaned = -7.15361e-05 Jy
! Total flux subtracted in 200 components = -7.15361e-05 Jy
! Clean residual min=-0.002450 max=0.002747 Jy/beam
! Clean residual mean=-0.000008 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.381612 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 96 components and 0.381612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064343Jy  sigma=1.165662
! Fit after  self-cal, rms=0.064341Jy  sigma=1.165639
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.738 mas, bmaj=5.27 mas, bpa=6.138 degrees
! Estimated noise=0.523013 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.738 x 5.27 at 6.138 degrees (North through East)
! Clean map  min=-0.0024645  max=0.32171 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=4.588 mas, bpa=5.502 degrees
! Estimated noise=0.667363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.249065 Jy
! Component: 100  -  total flux cleaned = 0.311834 Jy
! Component: 150  -  total flux cleaned = 0.338944 Jy
! Component: 200  -  total flux cleaned = 0.353206 Jy
! Total flux subtracted in 200 components = 0.353206 Jy
! Clean residual min=-0.004227 max=0.007153 Jy/beam
! Clean residual mean=-0.000013 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.353206 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.353206 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.738 mas, bmaj=5.27 mas, bpa=6.138 degrees
! Estimated noise=0.523013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109842 Jy
! Component: 100  -  total flux cleaned = 0.017497 Jy
! Component: 150  -  total flux cleaned = 0.0216501 Jy
! Component: 200  -  total flux cleaned = 0.0244193 Jy
! Total flux subtracted in 200 components = 0.0244193 Jy
! Clean residual min=-0.002423 max=0.002498 Jy/beam
! Clean residual mean=-0.000005 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.377625 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 65 components and 0.377626 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.784 mas, bmaj=8.761 mas, bpa=7.573 degrees
! Estimated noise=0.65927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237407 Jy
! Component: 100  -  total flux cleaned = 0.00320481 Jy
! Component: 150  -  total flux cleaned = 0.00341157 Jy
! Component: 200  -  total flux cleaned = 0.00352695 Jy
! Total flux subtracted in 200 components = 0.00352695 Jy
! Clean residual min=-0.002524 max=0.002718 Jy/beam
! Clean residual mean=-0.000008 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.381152 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.66183e-05 Jy
! Component: 100  -  total flux cleaned = 0.000177064 Jy
! Component: 150  -  total flux cleaned = 0.000232409 Jy
! Component: 200  -  total flux cleaned = 0.000291175 Jy
! Total flux subtracted in 200 components = 0.000291175 Jy
! Clean residual min=-0.002452 max=0.002777 Jy/beam
! Clean residual mean=-0.000008 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.381444 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 99 components and 0.381444 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.738 mas, bmaj=5.27 mas, bpa=6.138 degrees
! Estimated noise=0.523013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.1629e-05 Jy
! Component: 100  -  total flux cleaned = -3.04439e-05 Jy
! Component: 150  -  total flux cleaned = -6.76473e-05 Jy
! Component: 200  -  total flux cleaned = -6.81556e-05 Jy
! Total flux subtracted in 200 components = -6.81556e-05 Jy
! Clean residual min=-0.002531 max=0.002424 Jy/beam
! Clean residual mean=-0.000003 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.381375 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 112 components and 0.381375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064395Jy  sigma=1.166640
! Fit after  self-cal, rms=0.064387Jy  sigma=1.166440
wmodel J0727+4844_S_map.mod
! Writing 112 model components to file: J0727+4844_S_map.mod
wobs   J0727+4844_S_uvs.fits
! Writing UV FITS file: J0727+4844_S_uvs.fits
wwins  J0727+4844_S_map.win
! wwins: Wrote 2 windows to J0727+4844_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000163376 Jy
! Component: 100  -  total flux cleaned = -0.000123996 Jy
! Component: 150  -  total flux cleaned = -0.000163277 Jy
! Component: 200  -  total flux cleaned = -0.000240937 Jy
! Component: 250  -  total flux cleaned = -0.000241588 Jy
! Component: 300  -  total flux cleaned = -0.000205438 Jy
! Component: 350  -  total flux cleaned = -9.95249e-05 Jy
! Component: 400  -  total flux cleaned = -0.000134343 Jy
! Component: 450  -  total flux cleaned = 3.77454e-05 Jy
! Component: 500  -  total flux cleaned = 0.000138702 Jy
! Component: 550  -  total flux cleaned = 0.0001385 Jy
! Component: 600  -  total flux cleaned = 0.000269072 Jy
! Component: 650  -  total flux cleaned = 0.000333525 Jy
! Component: 700  -  total flux cleaned = 0.000428517 Jy
! Component: 750  -  total flux cleaned = 0.000583606 Jy
! Component: 800  -  total flux cleaned = 0.000552927 Jy
! Component: 850  -  total flux cleaned = 0.000583325 Jy
! Component: 900  -  total flux cleaned = 0.000553733 Jy
! Component: 950  -  total flux cleaned = 0.000553976 Jy
! Component: 1000  -  total flux cleaned = 0.000611926 Jy
! Component: 1050  -  total flux cleaned = 0.00061177 Jy
! Component: 1100  -  total flux cleaned = 0.000695935 Jy
! Component: 1150  -  total flux cleaned = 0.000585076 Jy
! Component: 1200  -  total flux cleaned = 0.000613135 Jy
! Component: 1250  -  total flux cleaned = 0.000585181 Jy
! Component: 1300  -  total flux cleaned = 0.000531735 Jy
! Component: 1350  -  total flux cleaned = 0.000531791 Jy
! Component: 1400  -  total flux cleaned = 0.000532099 Jy
! Component: 1450  -  total flux cleaned = 0.000480384 Jy
! Component: 1500  -  total flux cleaned = 0.000429271 Jy
! Component: 1550  -  total flux cleaned = 0.000429224 Jy
! Component: 1600  -  total flux cleaned = 0.000354139 Jy
! Component: 1650  -  total flux cleaned = 0.000329529 Jy
! Component: 1700  -  total flux cleaned = 0.000329011 Jy
! Component: 1750  -  total flux cleaned = 0.000256597 Jy
! Component: 1800  -  total flux cleaned = 0.000160432 Jy
! Component: 1850  -  total flux cleaned = 0.000184268 Jy
! Component: 1900  -  total flux cleaned = 0.000113776 Jy
! Component: 1950  -  total flux cleaned = 9.05452e-05 Jy
! Component: 2000  -  total flux cleaned = 2.12901e-05 Jy
! Component: 2050  -  total flux cleaned = 4.41292e-05 Jy
! Component: 2100  -  total flux cleaned = -4.64284e-05 Jy
! Component: 2150  -  total flux cleaned = 2.06385e-05 Jy
! Component: 2200  -  total flux cleaned = -4.57528e-05 Jy
! Component: 2250  -  total flux cleaned = -8.96332e-05 Jy
! Component: 2300  -  total flux cleaned = -8.94771e-05 Jy
! Component: 2350  -  total flux cleaned = -0.000111626 Jy
! Component: 2400  -  total flux cleaned = -0.00015445 Jy
! Component: 2450  -  total flux cleaned = -0.000112313 Jy
! Component: 2500  -  total flux cleaned = -0.000154629 Jy
! Component: 2550  -  total flux cleaned = -0.000216886 Jy
! Component: 2600  -  total flux cleaned = -0.000320288 Jy
! Component: 2650  -  total flux cleaned = -0.000381685 Jy
! Component: 2700  -  total flux cleaned = -0.000381668 Jy
! Component: 2750  -  total flux cleaned = -0.000462291 Jy
! Component: 2800  -  total flux cleaned = -0.000462154 Jy
! Component: 2850  -  total flux cleaned = -0.000462214 Jy
! Component: 2900  -  total flux cleaned = -0.000481823 Jy
! Component: 2950  -  total flux cleaned = -0.000462207 Jy
! Component: 3000  -  total flux cleaned = -0.000501212 Jy
! Component: 3050  -  total flux cleaned = -0.000501106 Jy
! Component: 3100  -  total flux cleaned = -0.000481999 Jy
! Component: 3150  -  total flux cleaned = -0.000500925 Jy
! Component: 3200  -  total flux cleaned = -0.000538777 Jy
! Component: 3250  -  total flux cleaned = -0.000538818 Jy
! Component: 3300  -  total flux cleaned = -0.000575747 Jy
! Component: 3350  -  total flux cleaned = -0.000668208 Jy
! Component: 3400  -  total flux cleaned = -0.000631413 Jy
! Component: 3450  -  total flux cleaned = -0.00070446 Jy
! Component: 3500  -  total flux cleaned = -0.000704453 Jy
! Component: 3550  -  total flux cleaned = -0.000758515 Jy
! Component: 3600  -  total flux cleaned = -0.000776493 Jy
! Component: 3650  -  total flux cleaned = -0.000776586 Jy
! Component: 3700  -  total flux cleaned = -0.000882294 Jy
! Component: 3750  -  total flux cleaned = -0.000847394 Jy
! Component: 3800  -  total flux cleaned = -0.000847377 Jy
! Component: 3850  -  total flux cleaned = -0.000881912 Jy
! Component: 3900  -  total flux cleaned = -0.00086473 Jy
! Component: 3950  -  total flux cleaned = -0.000881929 Jy
! Component: 4000  -  total flux cleaned = -0.000898937 Jy
! Component: 4050  -  total flux cleaned = -0.000898963 Jy
! Total flux subtracted in 4096 components = -0.000898997 Jy
! Clean residual min=-0.001237 max=0.000971 Jy/beam
! Clean residual mean=0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.380476 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 408 components and 0.380476 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0727+4844_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.738 x 5.27 at 6.138 degrees (North through East)
! Clean map  min=-0.001834  max=0.32185 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0727+4844_S_map.fits
wmodel /vlbi/uf001/uva//J0727+4844_S_map.mod
! Writing 408 model components to file: /vlbi/uf001/uva//J0727+4844_S_map.mod
wobs   /vlbi/uf001/uva//J0727+4844_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0727+4844_S_uvs.fits
wwins  /vlbi/uf001/uva//J0727+4844_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0727+4844_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.321847 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000302952 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.282387 0.282387 0.564775 1.12955 2.2591 4.5182 9.03639 18.0728 36.1456 72.2911
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.321 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1062.37 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0727+4844_S_dfm.log closed on Sun Jan 13 23:26:29 2019