! Started logfile: /vlbi/uf001/uvm//J0726+7911_X_b_dfm.log on Sun Jan 13 21:00:45 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0726+7911_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0726+7911_X_b_uvm.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! AN table 2: 20 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.737313 visibilities/baseline/integration-bin. ! Found source: J0726+7911 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8892 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0726+7911_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 61 telescope corrections were flagged in sub-array 1. ! A total of 80 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.183544Jy sigma=21.435676 ! Fit after self-cal, rms=0.414705Jy sigma=7.871039 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7424 mas, bmaj=1.3 mas, bpa=29.25 degrees ! Estimated noise=0.78063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433972 Jy ! Component: 100 - total flux cleaned = 0.582237 Jy ! Total flux subtracted in 100 components = 0.582237 Jy ! Clean residual min=-0.021824 max=0.065999 Jy/beam ! Clean residual mean=-0.000079 rms=0.005441 Jy/beam ! Combined flux in latest and established models = 0.582237 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.582237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144998Jy sigma=2.561780 ! Fit after self-cal, rms=0.144919Jy sigma=2.560741 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.072024 Jy ! Component: 100 - total flux cleaned = 0.109851 Jy ! Total flux subtracted in 100 components = 0.109851 Jy ! Clean residual min=-0.014674 max=0.021948 Jy/beam ! Clean residual mean=-0.000037 rms=0.003189 Jy/beam ! Combined flux in latest and established models = 0.692088 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.692088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089444Jy sigma=1.602903 ! Fit after self-cal, rms=0.089391Jy sigma=1.602319 ! Inverting map ! Added new window around map position (-1.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240259 Jy ! Component: 100 - total flux cleaned = 0.0404338 Jy ! Total flux subtracted in 100 components = 0.0404338 Jy ! Clean residual min=-0.013960 max=0.017745 Jy/beam ! Clean residual mean=-0.000023 rms=0.002758 Jy/beam ! Combined flux in latest and established models = 0.732522 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.732522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080094Jy sigma=1.449094 ! Fit after self-cal, rms=0.079824Jy sigma=1.444497 ! Inverting map ! Added new window around map position (2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016639 Jy ! Component: 100 - total flux cleaned = 0.0281919 Jy ! Total flux subtracted in 100 components = 0.0281919 Jy ! Clean residual min=-0.013004 max=0.014836 Jy/beam ! Clean residual mean=-0.000014 rms=0.002500 Jy/beam ! Combined flux in latest and established models = 0.760714 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.760714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075329Jy sigma=1.362508 ! Fit after self-cal, rms=0.075175Jy sigma=1.360053 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9483 mas, bmaj=1.585 mas, bpa=28.19 degrees ! Estimated noise=0.555502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117126 Jy ! Component: 100 - total flux cleaned = 0.0194736 Jy ! Component: 150 - total flux cleaned = 0.0241874 Jy ! Component: 200 - total flux cleaned = 0.0264527 Jy ! Total flux subtracted in 200 components = 0.0264527 Jy ! Clean residual min=-0.011075 max=0.012446 Jy/beam ! Clean residual mean=-0.000010 rms=0.002555 Jy/beam ! Combined flux in latest and established models = 0.787166 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.787166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073040Jy sigma=1.317875 ! Fit after self-cal, rms=0.072995Jy sigma=1.316915 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9483 x 1.585 at 28.19 degrees (North through East) ! Clean map min=-0.010547 max=0.58558 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 0.93 KP 1.02 ! LA 1.02 MK 1.01 NL 1.07 OV 0.94 ! PT 0.94 SC 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 0.97 KP 1.02 LA 1.01 ! NL 1.07 OV 0.93 PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 0.96 KP 1.04 ! LA 1.02 MK 0.98 NL 1.09 OV 0.93 ! PT 0.93 SC 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.00 KP 1.03 LA 1.01 ! NL 1.08 OV 0.92 PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.96 KP 1.03 ! LA 1.02 MK 1.02 NL 1.09 OV 0.94 ! PT 0.95 SC 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.98 KP 1.03 LA 1.01 ! NL 1.07 OV 0.91 PT 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.96 KP 1.03 ! LA 1.01 MK 1.03 NL 1.10 OV 0.92 ! PT 0.94 SC 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 0.98 KP 1.03 LA 1.03 ! NL 1.06 OV 0.93 PT 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.93 KP 1.03 ! LA 1.01 MK 1.02 NL 1.10 OV 0.92 ! PT 0.95 SC 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 0.98 KP 1.03 LA 1.02 ! NL 1.05 OV 0.91 PT 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 0.94 KP 1.03 ! LA 1.02 MK 1.03 NL 1.10 OV 0.92 ! PT 0.96 SC 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.99 KP 1.02 LA 1.02 ! NL 1.06 OV 0.93 PT 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 0.97 KP 1.04 ! LA 1.03 MK 1.04 NL 1.08 OV 0.92 ! PT 0.95 SC 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.02 KP 1.04 LA 1.01 ! NL 1.06 OV 0.92 PT 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.96 KP 1.03 ! LA 1.01 MK 1.02 NL 1.08 OV 0.93 ! PT 0.96 SC 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.99 KP 1.02 LA 1.01 ! NL 1.07 OV 0.93 PT 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.94 KP 1.03 ! LA 1.03 MK 1.05 NL 1.12 OV 0.92 ! PT 0.95 SC 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.01 KP 1.03 LA 1.04 ! NL 1.06 OV 0.93 PT 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.95 KP 1.03 ! LA 1.02 MK 0.99 NL 1.11 OV 0.94 ! PT 0.95 SC 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.00 KP 1.03 LA 1.01 ! NL 1.08 OV 0.93 PT 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 0.99 KP 1.05 ! LA 1.03 MK 1.04 NL 1.11 OV 0.92 ! PT 0.96 SC 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.00 KP 1.03 LA 1.03 ! NL 1.06 OV 0.92 PT 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.95 KP 1.05 ! LA 1.04 MK 1.01 NL 1.08 OV 0.93 ! PT 0.96 SC 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 0.99 KP 1.04 LA 1.04 ! NL 1.08 OV 0.92 PT 0.98 ! ! ! Fit before self-cal, rms=0.072995Jy sigma=1.316915 ! Fit after self-cal, rms=0.059345Jy sigma=1.056550 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9405 mas, bmaj=1.571 mas, bpa=27.98 degrees ! Estimated noise=0.557448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00854789 Jy ! Component: 100 - total flux cleaned = -0.0109484 Jy ! Component: 150 - total flux cleaned = -0.0117452 Jy ! Component: 200 - total flux cleaned = -0.0121473 Jy ! Total flux subtracted in 200 components = -0.0121473 Jy ! Clean residual min=-0.005872 max=0.005205 Jy/beam ! Clean residual mean=-0.000003 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.775019 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.775019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057881Jy sigma=1.029300 ! Fit after self-cal, rms=0.057863Jy sigma=1.028403 ! Inverting map ! Added new window around map position (-1.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168923 Jy ! Component: 100 - total flux cleaned = 0.00128856 Jy ! Component: 150 - total flux cleaned = 0.00116999 Jy ! Component: 200 - total flux cleaned = 0.00116949 Jy ! Total flux subtracted in 200 components = 0.00116949 Jy ! Clean residual min=-0.004891 max=0.004342 Jy/beam ! Clean residual mean=-0.000002 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.776189 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.776189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057248Jy sigma=1.017311 ! Fit after self-cal, rms=0.057201Jy sigma=1.016435 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057201Jy sigma=1.016435 ! Fit after self-cal, rms=0.055328Jy sigma=0.981943 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.941 mas, bmaj=1.57 mas, bpa=28 degrees ! Estimated noise=0.557815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00359947 Jy ! Component: 100 - total flux cleaned = -0.00444007 Jy ! Component: 150 - total flux cleaned = -0.00523722 Jy ! Component: 200 - total flux cleaned = -0.0057546 Jy ! Total flux subtracted in 200 components = -0.0057546 Jy ! Clean residual min=-0.002956 max=0.002944 Jy/beam ! Clean residual mean=0.000002 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.770434 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 67 components and 0.770434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054865Jy sigma=0.973100 ! Fit after self-cal, rms=0.054844Jy sigma=0.972721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047665 Jy ! Component: 100 - total flux cleaned = -0.000789544 Jy ! Component: 150 - total flux cleaned = -0.00113673 Jy ! Component: 200 - total flux cleaned = -0.00151173 Jy ! Total flux subtracted in 200 components = -0.00151173 Jy ! Clean residual min=-0.002803 max=0.002886 Jy/beam ! Clean residual mean=0.000001 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.768922 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.768922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054668Jy sigma=0.969369 ! Fit after self-cal, rms=0.054653Jy sigma=0.969130 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054653Jy sigma=0.969130 ! Fit after self-cal, rms=0.054542Jy sigma=0.966901 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9414 mas, bmaj=1.569 mas, bpa=28.08 degrees ! Estimated noise=0.558155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249781 Jy ! Component: 100 - total flux cleaned = -0.003083 Jy ! Component: 150 - total flux cleaned = -0.0034315 Jy ! Component: 200 - total flux cleaned = -0.0038531 Jy ! Total flux subtracted in 200 components = -0.0038531 Jy ! Clean residual min=-0.002641 max=0.002658 Jy/beam ! Clean residual mean=0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.765069 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 78 components and 0.765069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054321Jy sigma=0.962795 ! Fit after self-cal, rms=0.054308Jy sigma=0.962620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000412844 Jy ! Component: 100 - total flux cleaned = -0.000628847 Jy ! Component: 150 - total flux cleaned = -0.000824839 Jy ! Component: 200 - total flux cleaned = -0.000916764 Jy ! Total flux subtracted in 200 components = -0.000916764 Jy ! Clean residual min=-0.002609 max=0.002644 Jy/beam ! Clean residual mean=0.000000 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.764153 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 0.764153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054219Jy sigma=0.960969 ! Fit after self-cal, rms=0.054213Jy sigma=0.960886 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054213Jy sigma=0.960886 ! Fit after self-cal, rms=0.054162Jy sigma=0.959774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.358 mas, bmaj=2.887 mas, bpa=24.3 degrees ! Estimated noise=0.732686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023467 Jy ! Component: 100 - total flux cleaned = -0.00348593 Jy ! Component: 150 - total flux cleaned = -0.00373647 Jy ! Component: 200 - total flux cleaned = -0.00394352 Jy ! Total flux subtracted in 200 components = -0.00394352 Jy ! Clean residual min=-0.002688 max=0.002718 Jy/beam ! Clean residual mean=-0.000001 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.760209 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 100 components and 0.760209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054106Jy sigma=0.958931 ! Fit after self-cal, rms=0.054102Jy sigma=0.958852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028084 Jy ! Component: 100 - total flux cleaned = -0.0003304 Jy ! Component: 150 - total flux cleaned = -0.000372369 Jy ! Component: 200 - total flux cleaned = -0.000429167 Jy ! Total flux subtracted in 200 components = -0.000429167 Jy ! Clean residual min=-0.002706 max=0.002720 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.75978 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 0.75978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054089Jy sigma=0.958756 ! Fit after self-cal, rms=0.054088Jy sigma=0.958729 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9417 mas, bmaj=1.569 mas, bpa=28.11 degrees ! Estimated noise=0.558371 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9417 x 1.569 at 28.11 degrees (North through East) ! Clean map min=-0.0024113 max=0.58708 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054088Jy sigma=0.958729 ! Fit after self-cal, rms=0.050929Jy sigma=0.890956 ! Inverting map and beam ! Estimated beam: bmin=0.9425 mas, bmaj=1.57 mas, bpa=28.11 degrees ! Estimated noise=0.558618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00131537 Jy ! Component: 100 - total flux cleaned = -0.00159402 Jy ! Component: 150 - total flux cleaned = -0.00184416 Jy ! Component: 200 - total flux cleaned = -0.00198158 Jy ! Total flux subtracted in 200 components = -0.00198158 Jy ! Clean residual min=-0.002476 max=0.002386 Jy/beam ! Clean residual mean=-0.000000 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.757798 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 116 components and 0.757798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050828Jy sigma=0.889061 ! Fit after self-cal, rms=0.050825Jy sigma=0.889029 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142397 Jy ! Component: 100 - total flux cleaned = -0.000183092 Jy ! Component: 150 - total flux cleaned = -0.000295711 Jy ! Component: 200 - total flux cleaned = -0.000366376 Jy ! Total flux subtracted in 200 components = -0.000366376 Jy ! Clean residual min=-0.002485 max=0.002371 Jy/beam ! Clean residual mean=-0.000000 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.757432 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 121 components and 0.757432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050774Jy sigma=0.888075 ! Fit after self-cal, rms=0.050772Jy sigma=0.888057 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050772Jy sigma=0.888057 ! Fit after self-cal, rms=0.050778Jy sigma=0.887669 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7427 mas, bmaj=1.295 mas, bpa=29.14 degrees ! Estimated noise=0.779982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433254 Jy ! Component: 100 - total flux cleaned = 0.581684 Jy ! Component: 150 - total flux cleaned = 0.654073 Jy ! Component: 200 - total flux cleaned = 0.692345 Jy ! Total flux subtracted in 200 components = 0.692345 Jy ! Clean residual min=-0.008251 max=0.018473 Jy/beam ! Clean residual mean=-0.000027 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.692345 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.692345 Jy ! Inverting map and beam ! Estimated beam: bmin=0.943 mas, bmaj=1.57 mas, bpa=28.12 degrees ! Estimated noise=0.558874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284083 Jy ! Component: 100 - total flux cleaned = 0.0431534 Jy ! Component: 150 - total flux cleaned = 0.0513447 Jy ! Component: 200 - total flux cleaned = 0.0565634 Jy ! Total flux subtracted in 200 components = 0.0565634 Jy ! Clean residual min=-0.002950 max=0.004110 Jy/beam ! Clean residual mean=-0.000005 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.748909 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.748909 Jy ! Inverting map ! Added new window around map position (0.8, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403023 Jy ! Component: 100 - total flux cleaned = 0.00528928 Jy ! Component: 150 - total flux cleaned = 0.00576998 Jy ! Component: 200 - total flux cleaned = 0.00585757 Jy ! Total flux subtracted in 200 components = 0.00585757 Jy ! Clean residual min=-0.002746 max=0.002701 Jy/beam ! Clean residual mean=-0.000002 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.754766 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.754766 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.363 mas, bmaj=2.889 mas, bpa=24.37 degrees ! Estimated noise=0.732222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185427 Jy ! Component: 100 - total flux cleaned = 0.000586984 Jy ! Component: 150 - total flux cleaned = 0.000762478 Jy ! Component: 200 - total flux cleaned = 0.000790298 Jy ! Total flux subtracted in 200 components = 0.000790298 Jy ! Clean residual min=-0.002478 max=0.002533 Jy/beam ! Clean residual mean=-0.000002 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.755557 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.72707e-07 Jy ! Component: 100 - total flux cleaned = 2.29346e-05 Jy ! Component: 150 - total flux cleaned = 2.38083e-05 Jy ! Component: 200 - total flux cleaned = 2.50035e-05 Jy ! Total flux subtracted in 200 components = 2.50035e-05 Jy ! Clean residual min=-0.002427 max=0.002506 Jy/beam ! Clean residual mean=-0.000002 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.755582 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 81 components and 0.755582 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.943 mas, bmaj=1.57 mas, bpa=28.12 degrees ! Estimated noise=0.558874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000974223 Jy ! Component: 100 - total flux cleaned = -0.000764016 Jy ! Component: 150 - total flux cleaned = -0.000765964 Jy ! Component: 200 - total flux cleaned = -0.000641122 Jy ! Total flux subtracted in 200 components = -0.000641122 Jy ! Clean residual min=-0.002510 max=0.002461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.754941 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 0.75494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050964Jy sigma=0.892203 ! Fit after self-cal, rms=0.050942Jy sigma=0.891870 wmodel J0726+7911_X_b_map.mod ! Writing 97 model components to file: J0726+7911_X_b_map.mod wobs J0726+7911_X_b_uvs.fits ! Writing UV FITS file: J0726+7911_X_b_uvs.fits wwins J0726+7911_X_b_map.win ! wwins: Wrote 5 windows to J0726+7911_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.7821e-05 Jy ! Component: 100 - total flux cleaned = -4.25722e-06 Jy ! Component: 150 - total flux cleaned = -0.000170567 Jy ! Component: 200 - total flux cleaned = -0.000410104 Jy ! Component: 250 - total flux cleaned = -0.000680228 Jy ! Component: 300 - total flux cleaned = -0.000829623 Jy ! Component: 350 - total flux cleaned = -0.00101299 Jy ! Component: 400 - total flux cleaned = -0.00115635 Jy ! Component: 450 - total flux cleaned = -0.00122634 Jy ! Component: 500 - total flux cleaned = -0.00136405 Jy ! Component: 550 - total flux cleaned = -0.0014649 Jy ! Component: 600 - total flux cleaned = -0.00139849 Jy ! Component: 650 - total flux cleaned = -0.00156245 Jy ! Component: 700 - total flux cleaned = -0.00159399 Jy ! Component: 750 - total flux cleaned = -0.00156163 Jy ! Component: 800 - total flux cleaned = -0.00159281 Jy ! Component: 850 - total flux cleaned = -0.00156111 Jy ! Component: 900 - total flux cleaned = -0.00150016 Jy ! Component: 950 - total flux cleaned = -0.00159136 Jy ! Component: 1000 - total flux cleaned = -0.00156114 Jy ! Component: 1050 - total flux cleaned = -0.00159093 Jy ! Component: 1100 - total flux cleaned = -0.00161991 Jy ! Component: 1150 - total flux cleaned = -0.00161994 Jy ! Component: 1200 - total flux cleaned = -0.00164832 Jy ! Component: 1250 - total flux cleaned = -0.00164845 Jy ! Component: 1300 - total flux cleaned = -0.00164808 Jy ! Component: 1350 - total flux cleaned = -0.00170322 Jy ! Component: 1400 - total flux cleaned = -0.00170302 Jy ! Component: 1450 - total flux cleaned = -0.00167612 Jy ! Component: 1500 - total flux cleaned = -0.00175726 Jy ! Component: 1550 - total flux cleaned = -0.0018904 Jy ! Component: 1600 - total flux cleaned = -0.00186374 Jy ! Component: 1650 - total flux cleaned = -0.00194236 Jy ! Component: 1700 - total flux cleaned = -0.00194211 Jy ! Component: 1750 - total flux cleaned = -0.00194216 Jy ! Component: 1800 - total flux cleaned = -0.00201937 Jy ! Component: 1850 - total flux cleaned = -0.00212103 Jy ! Component: 1900 - total flux cleaned = -0.00212082 Jy ! Component: 1950 - total flux cleaned = -0.00212093 Jy ! Component: 2000 - total flux cleaned = -0.00222049 Jy ! Component: 2050 - total flux cleaned = -0.00229441 Jy ! Component: 2100 - total flux cleaned = -0.00236765 Jy ! Component: 2150 - total flux cleaned = -0.00239183 Jy ! Component: 2200 - total flux cleaned = -0.00248793 Jy ! Component: 2250 - total flux cleaned = -0.00260757 Jy ! Component: 2300 - total flux cleaned = -0.00265486 Jy ! Component: 2350 - total flux cleaned = -0.00279618 Jy ! Component: 2400 - total flux cleaned = -0.0028196 Jy ! Component: 2450 - total flux cleaned = -0.002936 Jy ! Component: 2500 - total flux cleaned = -0.00302837 Jy ! Component: 2550 - total flux cleaned = -0.00309706 Jy ! Component: 2600 - total flux cleaned = -0.00311963 Jy ! Component: 2650 - total flux cleaned = -0.00325529 Jy ! Component: 2700 - total flux cleaned = -0.00325546 Jy ! Component: 2750 - total flux cleaned = -0.00332238 Jy ! Component: 2800 - total flux cleaned = -0.00345559 Jy ! Component: 2850 - total flux cleaned = -0.00336726 Jy ! Component: 2900 - total flux cleaned = -0.00347691 Jy ! Component: 2950 - total flux cleaned = -0.00352057 Jy ! Component: 3000 - total flux cleaned = -0.00356414 Jy ! Component: 3050 - total flux cleaned = -0.00358577 Jy ! Component: 3100 - total flux cleaned = -0.00367129 Jy ! Component: 3150 - total flux cleaned = -0.00379918 Jy ! Component: 3200 - total flux cleaned = -0.00382045 Jy ! Component: 3250 - total flux cleaned = -0.00388364 Jy ! Component: 3300 - total flux cleaned = -0.00390463 Jy ! Component: 3350 - total flux cleaned = -0.0039251 Jy ! Component: 3400 - total flux cleaned = -0.00398717 Jy ! Component: 3450 - total flux cleaned = -0.00398737 Jy ! Component: 3500 - total flux cleaned = -0.00406938 Jy ! Component: 3550 - total flux cleaned = -0.0040693 Jy ! Component: 3600 - total flux cleaned = -0.00400861 Jy ! Component: 3650 - total flux cleaned = -0.0040892 Jy ! Component: 3700 - total flux cleaned = -0.00410928 Jy ! Component: 3750 - total flux cleaned = -0.0041491 Jy ! Component: 3800 - total flux cleaned = -0.00414904 Jy ! Component: 3850 - total flux cleaned = -0.00412956 Jy ! Component: 3900 - total flux cleaned = -0.0041884 Jy ! Component: 3950 - total flux cleaned = -0.00424678 Jy ! Component: 4000 - total flux cleaned = -0.004208 Jy ! Component: 4050 - total flux cleaned = -0.00424661 Jy ! Total flux subtracted in 4096 components = -0.00430426 Jy ! Clean residual min=-0.001124 max=0.001104 Jy/beam ! Clean residual mean=-0.000001 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.750636 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 400 components and 0.750636 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0726+7911_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.943 x 1.57 at 28.12 degrees (North through East) ! Clean map min=-0.0016656 max=0.5888 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0726+7911_X_b_map.fits wmodel /vlbi/uf001/uvm//J0726+7911_X_b_map.mod ! Writing 400 model components to file: /vlbi/uf001/uvm//J0726+7911_X_b_map.mod wobs /vlbi/uf001/uvm//J0726+7911_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0726+7911_X_b_uvs.fits wwins /vlbi/uf001/uvm//J0726+7911_X_b_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J0726+7911_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.588804 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000322201 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.164164 0.164164 0.328328 0.656656 1.31331 2.62662 5.25325 10.5065 21.013 42.026 84.0519 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.588 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1827.44 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0726+7911_X_b_dfm.log closed on Sun Jan 13 21:00:50 2019