! Started logfile: /vlbi/uf001/uva//J0724-0715_X_dfm.log on Sun Jan 13 23:25:44 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0724-0715_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0724-0715_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.963743 visibilities/baseline/integration-bin. ! Found source: J0724-0715 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29664 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0724-0715_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.284344Jy sigma=22.697444 ! Fit after self-cal, rms=0.238144Jy sigma=4.507117 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6594 mas, bmaj=1.65 mas, bpa=-3.964 degrees ! Estimated noise=0.384933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.601277 Jy ! Component: 100 - total flux cleaned = 0.765712 Jy ! Total flux subtracted in 100 components = 0.765712 Jy ! Clean residual min=-0.021887 max=0.067910 Jy/beam ! Clean residual mean=0.000010 rms=0.005116 Jy/beam ! Combined flux in latest and established models = 0.765712 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.765712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138829Jy sigma=2.385230 ! Fit after self-cal, rms=0.138733Jy sigma=2.383950 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697936 Jy ! Component: 100 - total flux cleaned = 0.10034 Jy ! Total flux subtracted in 100 components = 0.10034 Jy ! Clean residual min=-0.013992 max=0.029377 Jy/beam ! Clean residual mean=0.000005 rms=0.003388 Jy/beam ! Combined flux in latest and established models = 0.866053 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 7 components and 0.866053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097668Jy sigma=1.718431 ! Fit after self-cal, rms=0.097579Jy sigma=1.716615 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255536 Jy ! Component: 100 - total flux cleaned = 0.0369544 Jy ! Total flux subtracted in 100 components = 0.0369544 Jy ! Clean residual min=-0.013160 max=0.022511 Jy/beam ! Clean residual mean=0.000000 rms=0.002999 Jy/beam ! Combined flux in latest and established models = 0.903007 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.903007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090881Jy sigma=1.591591 ! Fit after self-cal, rms=0.090198Jy sigma=1.580315 ! Inverting map ! Added new window around map position (-1.8, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197369 Jy ! Component: 100 - total flux cleaned = 0.0263728 Jy ! Total flux subtracted in 100 components = 0.0263728 Jy ! Clean residual min=-0.013145 max=0.018428 Jy/beam ! Clean residual mean=-0.000002 rms=0.002709 Jy/beam ! Combined flux in latest and established models = 0.92938 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.92938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085538Jy sigma=1.494589 ! Fit after self-cal, rms=0.085363Jy sigma=1.491379 ! Inverting map ! Added new window around map position (0.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161886 Jy ! Component: 100 - total flux cleaned = 0.0250462 Jy ! Total flux subtracted in 100 components = 0.0250462 Jy ! Clean residual min=-0.011980 max=0.014622 Jy/beam ! Clean residual mean=-0.000004 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.954426 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.954426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082833Jy sigma=1.448459 ! Fit after self-cal, rms=0.082472Jy sigma=1.442414 ! Inverting map ! Added new window around map position (-2.8, -7.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134791 Jy ! Component: 100 - total flux cleaned = 0.0201353 Jy ! Total flux subtracted in 100 components = 0.0201353 Jy ! Clean residual min=-0.011488 max=0.013661 Jy/beam ! Clean residual mean=-0.000005 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.974562 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.974562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080617Jy sigma=1.407203 ! Fit after self-cal, rms=0.080330Jy sigma=1.402562 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8216 mas, bmaj=1.973 mas, bpa=-4.008 degrees ! Estimated noise=0.237633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149295 Jy ! Component: 100 - total flux cleaned = 0.0245194 Jy ! Component: 150 - total flux cleaned = 0.0276306 Jy ! Component: 200 - total flux cleaned = 0.0295485 Jy ! Total flux subtracted in 200 components = 0.0295485 Jy ! Clean residual min=-0.010014 max=0.009726 Jy/beam ! Clean residual mean=-0.000011 rms=0.002408 Jy/beam ! Combined flux in latest and established models = 1.00411 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 1.00411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076755Jy sigma=1.336884 ! Fit after self-cal, rms=0.076598Jy sigma=1.334440 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8216 x 1.973 at -4.008 degrees (North through East) ! Clean map min=-0.0099742 max=0.77771 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.96 KP 1.02 ! LA 1.02 MK 1.01 NL 1.08 OV 0.94 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.97 KP 1.01 ! LA 1.02 MK 1.01 NL 1.08 OV 0.95 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.97 KP 1.02 ! LA 1.03 MK 1.01 NL 1.09 OV 0.95 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.97 KP 1.02 ! LA 1.02 MK 1.00 NL 1.08 OV 0.95 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.97 KP 1.02 ! LA 1.03 MK 1.02 NL 1.08 OV 0.94 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.96 KP 1.02 ! LA 1.03 MK 1.01 NL 1.08 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.97 KP 1.01 ! LA 1.03 MK 1.00 NL 1.08 OV 0.95 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.97 KP 1.02 ! LA 1.03 MK 1.01 NL 1.08 OV 0.95 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.96 KP 1.01 ! LA 1.03 MK 1.01 NL 1.08 OV 0.95 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.96 KP 1.02 ! LA 1.03 MK 1.00 NL 1.09 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.97 KP 1.02 ! LA 1.02 MK 1.01 NL 1.08 OV 0.94 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.96 KP 1.01 ! LA 1.02 MK 1.02 NL 1.08 OV 0.94 ! PT 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.076598Jy sigma=1.334440 ! Fit after self-cal, rms=0.065199Jy sigma=1.105195 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8198 mas, bmaj=1.977 mas, bpa=-3.839 degrees ! Estimated noise=0.239691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0107816 Jy ! Component: 100 - total flux cleaned = -0.0173417 Jy ! Component: 150 - total flux cleaned = -0.0210057 Jy ! Component: 200 - total flux cleaned = -0.0235936 Jy ! Total flux subtracted in 200 components = -0.0235936 Jy ! Clean residual min=-0.005982 max=0.005693 Jy/beam ! Clean residual mean=-0.000006 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.980516 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 90 components and 0.980516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062992Jy sigma=1.067828 ! Fit after self-cal, rms=0.062930Jy sigma=1.066491 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062930Jy sigma=1.066491 ! Fit after self-cal, rms=0.061490Jy sigma=1.041323 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8198 mas, bmaj=1.979 mas, bpa=-3.778 degrees ! Estimated noise=0.239246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00629615 Jy ! Component: 100 - total flux cleaned = -0.0108323 Jy ! Component: 150 - total flux cleaned = -0.0133097 Jy ! Component: 200 - total flux cleaned = -0.0144149 Jy ! Total flux subtracted in 200 components = -0.0144149 Jy ! Clean residual min=-0.005000 max=0.005037 Jy/beam ! Clean residual mean=-0.000004 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.966102 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.966102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060545Jy sigma=1.025716 ! Fit after self-cal, rms=0.060518Jy sigma=1.025133 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181527 Jy ! Component: 100 - total flux cleaned = -0.00277183 Jy ! Component: 150 - total flux cleaned = -0.00369527 Jy ! Component: 200 - total flux cleaned = -0.00443719 Jy ! Total flux subtracted in 200 components = -0.00443719 Jy ! Clean residual min=-0.004341 max=0.004695 Jy/beam ! Clean residual mean=-0.000004 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.961664 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.961664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060216Jy sigma=1.020047 ! Fit after self-cal, rms=0.060200Jy sigma=1.019709 ! Inverting map ! Added new window around map position (-1.2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355928 Jy ! Component: 100 - total flux cleaned = 0.00296417 Jy ! Component: 150 - total flux cleaned = 0.00252746 Jy ! Component: 200 - total flux cleaned = 0.00205629 Jy ! Total flux subtracted in 200 components = 0.00205629 Jy ! Clean residual min=-0.004325 max=0.003541 Jy/beam ! Clean residual mean=-0.000004 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.963721 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 0.963721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059817Jy sigma=1.013303 ! Fit after self-cal, rms=0.059800Jy sigma=1.012830 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059800Jy sigma=1.012830 ! Fit after self-cal, rms=0.059499Jy sigma=1.007723 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8193 mas, bmaj=1.979 mas, bpa=-3.743 degrees ! Estimated noise=0.239236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00388306 Jy ! Component: 100 - total flux cleaned = -0.00579955 Jy ! Component: 150 - total flux cleaned = -0.00690746 Jy ! Component: 200 - total flux cleaned = -0.0073886 Jy ! Total flux subtracted in 200 components = -0.0073886 Jy ! Clean residual min=-0.003731 max=0.003015 Jy/beam ! Clean residual mean=-0.000003 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.956332 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.956332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059114Jy sigma=1.001531 ! Fit after self-cal, rms=0.059107Jy sigma=1.001267 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000734956 Jy ! Component: 100 - total flux cleaned = -0.00120112 Jy ! Component: 150 - total flux cleaned = -0.0016249 Jy ! Component: 200 - total flux cleaned = -0.00206751 Jy ! Total flux subtracted in 200 components = -0.00206751 Jy ! Clean residual min=-0.003587 max=0.002780 Jy/beam ! Clean residual mean=-0.000003 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.954265 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 146 components and 0.954265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058974Jy sigma=0.999164 ! Fit after self-cal, rms=0.058972Jy sigma=0.999052 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058972Jy sigma=0.999052 ! Fit after self-cal, rms=0.058795Jy sigma=0.996871 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.084 mas, bmaj=3.548 mas, bpa=-0.262 degrees ! Estimated noise=0.32603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00403358 Jy ! Component: 100 - total flux cleaned = -0.00682214 Jy ! Component: 150 - total flux cleaned = -0.00875009 Jy ! Component: 200 - total flux cleaned = -0.00976699 Jy ! Total flux subtracted in 200 components = -0.00976699 Jy ! Clean residual min=-0.003196 max=0.003096 Jy/beam ! Clean residual mean=-0.000004 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.944498 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 0.944498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058660Jy sigma=0.994674 ! Fit after self-cal, rms=0.058653Jy sigma=0.994505 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115982 Jy ! Component: 100 - total flux cleaned = -0.00185269 Jy ! Component: 150 - total flux cleaned = -0.00246077 Jy ! Component: 200 - total flux cleaned = -0.00300868 Jy ! Total flux subtracted in 200 components = -0.00300868 Jy ! Clean residual min=-0.003114 max=0.003080 Jy/beam ! Clean residual mean=-0.000003 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.941489 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 178 components and 0.941489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058643Jy sigma=0.994355 ! Fit after self-cal, rms=0.058643Jy sigma=0.994298 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8191 mas, bmaj=1.979 mas, bpa=-3.718 degrees ! Estimated noise=0.239071 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8191 x 1.979 at -3.718 degrees (North through East) ! Clean map min=-0.0032404 max=0.78617 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058643Jy sigma=0.994298 ! Fit after self-cal, rms=0.055198Jy sigma=0.925741 ! Inverting map and beam ! Estimated beam: bmin=0.8188 mas, bmaj=1.98 mas, bpa=-3.72 degrees ! Estimated noise=0.239032 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00254642 Jy ! Component: 100 - total flux cleaned = -0.00379922 Jy ! Component: 150 - total flux cleaned = -0.00448595 Jy ! Component: 200 - total flux cleaned = -0.00488006 Jy ! Total flux subtracted in 200 components = -0.00488006 Jy ! Clean residual min=-0.002813 max=0.002263 Jy/beam ! Clean residual mean=-0.000001 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.936609 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 189 components and 0.936609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055018Jy sigma=0.922732 ! Fit after self-cal, rms=0.055018Jy sigma=0.922650 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286497 Jy ! Component: 100 - total flux cleaned = -0.000488019 Jy ! Component: 150 - total flux cleaned = -0.000628395 Jy ! Component: 200 - total flux cleaned = -0.000672931 Jy ! Total flux subtracted in 200 components = -0.000672931 Jy ! Clean residual min=-0.002737 max=0.002164 Jy/beam ! Clean residual mean=-0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.935936 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 199 components and 0.935936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054940Jy sigma=0.921341 ! Fit after self-cal, rms=0.054940Jy sigma=0.921296 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054940Jy sigma=0.921296 ! Fit after self-cal, rms=0.054855Jy sigma=0.920383 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.657 mas, bmaj=1.656 mas, bpa=-3.617 degrees ! Estimated noise=0.386669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.603875 Jy ! Component: 100 - total flux cleaned = 0.766932 Jy ! Component: 150 - total flux cleaned = 0.835589 Jy ! Component: 200 - total flux cleaned = 0.865394 Jy ! Total flux subtracted in 200 components = 0.865394 Jy ! Clean residual min=-0.009481 max=0.013205 Jy/beam ! Clean residual mean=0.000005 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.865395 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.865395 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8187 mas, bmaj=1.98 mas, bpa=-3.713 degrees ! Estimated noise=0.238901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183317 Jy ! Component: 100 - total flux cleaned = 0.0298886 Jy ! Component: 150 - total flux cleaned = 0.0381484 Jy ! Component: 200 - total flux cleaned = 0.0444882 Jy ! Total flux subtracted in 200 components = 0.0444882 Jy ! Clean residual min=-0.003459 max=0.004317 Jy/beam ! Clean residual mean=0.000003 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.909883 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 31 components and 0.909883 Jy ! Inverting map ! Added new window around map position (-0.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449313 Jy ! Component: 100 - total flux cleaned = 0.0079206 Jy ! Component: 150 - total flux cleaned = 0.0108647 Jy ! Component: 200 - total flux cleaned = 0.0130256 Jy ! Total flux subtracted in 200 components = 0.0130256 Jy ! Clean residual min=-0.002619 max=0.002910 Jy/beam ! Clean residual mean=0.000001 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.922908 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.922908 Jy ! Inverting map ! Added new window around map position (3.2, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213106 Jy ! Component: 100 - total flux cleaned = 0.00323997 Jy ! Component: 150 - total flux cleaned = 0.00434555 Jy ! Component: 200 - total flux cleaned = 0.00534739 Jy ! Total flux subtracted in 200 components = 0.00534739 Jy ! Clean residual min=-0.002259 max=0.002206 Jy/beam ! Clean residual mean=0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.928256 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 69 components and 0.928256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.087 mas, bmaj=3.551 mas, bpa=-0.2438 degrees ! Estimated noise=0.325756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238049 Jy ! Component: 100 - total flux cleaned = 0.0030392 Jy ! Component: 150 - total flux cleaned = 0.00364402 Jy ! Component: 200 - total flux cleaned = 0.0040201 Jy ! Total flux subtracted in 200 components = 0.0040201 Jy ! Clean residual min=-0.002833 max=0.002421 Jy/beam ! Clean residual mean=-0.000000 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.932276 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286651 Jy ! Component: 100 - total flux cleaned = 0.00050242 Jy ! Component: 150 - total flux cleaned = 0.000621628 Jy ! Component: 200 - total flux cleaned = 0.000729961 Jy ! Total flux subtracted in 200 components = 0.000729961 Jy ! Clean residual min=-0.002736 max=0.002378 Jy/beam ! Clean residual mean=-0.000000 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.933006 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 106 components and 0.933006 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8187 mas, bmaj=1.98 mas, bpa=-3.713 degrees ! Estimated noise=0.238901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561683 Jy ! Component: 100 - total flux cleaned = -0.000215025 Jy ! Component: 150 - total flux cleaned = 2.81483e-05 Jy ! Component: 200 - total flux cleaned = 0.000139966 Jy ! Total flux subtracted in 200 components = 0.000139966 Jy ! Clean residual min=-0.001961 max=0.001852 Jy/beam ! Clean residual mean=-0.000000 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.933146 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.933146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054637Jy sigma=0.917394 ! Fit after self-cal, rms=0.054597Jy sigma=0.916547 wmodel J0724-0715_X_map.mod ! Writing 122 model components to file: J0724-0715_X_map.mod wobs J0724-0715_X_uvs.fits ! Writing UV FITS file: J0724-0715_X_uvs.fits wwins J0724-0715_X_map.win ! wwins: Wrote 9 windows to J0724-0715_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000818805 Jy ! Component: 100 - total flux cleaned = -0.00105903 Jy ! Component: 150 - total flux cleaned = -0.00125223 Jy ! Component: 200 - total flux cleaned = -0.00140623 Jy ! Component: 250 - total flux cleaned = -0.00164442 Jy ! Component: 300 - total flux cleaned = -0.00176064 Jy ! Component: 350 - total flux cleaned = -0.00181749 Jy ! Component: 400 - total flux cleaned = -0.00181776 Jy ! Component: 450 - total flux cleaned = -0.00184442 Jy ! Component: 500 - total flux cleaned = -0.00179124 Jy ! Component: 550 - total flux cleaned = -0.00171366 Jy ! Component: 600 - total flux cleaned = -0.00163817 Jy ! Component: 650 - total flux cleaned = -0.00153956 Jy ! Component: 700 - total flux cleaned = -0.00149104 Jy ! Component: 750 - total flux cleaned = -0.00139533 Jy ! Component: 800 - total flux cleaned = -0.00120786 Jy ! Component: 850 - total flux cleaned = -0.00123117 Jy ! Component: 900 - total flux cleaned = -0.00118533 Jy ! Component: 950 - total flux cleaned = -0.00107364 Jy ! Component: 1000 - total flux cleaned = -0.00100758 Jy ! Component: 1050 - total flux cleaned = -0.000877623 Jy ! Component: 1100 - total flux cleaned = -0.000813408 Jy ! Component: 1150 - total flux cleaned = -0.000602771 Jy ! Component: 1200 - total flux cleaned = -0.000436664 Jy ! Component: 1250 - total flux cleaned = -0.00035501 Jy ! Component: 1300 - total flux cleaned = -0.000213164 Jy ! Component: 1350 - total flux cleaned = -7.3004e-05 Jy ! Component: 1400 - total flux cleaned = 2.57952e-05 Jy ! Component: 1450 - total flux cleaned = 8.46044e-05 Jy ! Component: 1500 - total flux cleaned = 0.000181288 Jy ! Component: 1550 - total flux cleaned = 0.000353227 Jy ! Component: 1600 - total flux cleaned = 0.000390856 Jy ! Component: 1650 - total flux cleaned = 0.00052151 Jy ! Component: 1700 - total flux cleaned = 0.000705894 Jy ! Component: 1750 - total flux cleaned = 0.000797245 Jy ! Component: 1800 - total flux cleaned = 0.000941644 Jy ! Component: 1850 - total flux cleaned = 0.000995319 Jy ! Component: 1900 - total flux cleaned = 0.001137 Jy ! Component: 1950 - total flux cleaned = 0.00132928 Jy ! Component: 2000 - total flux cleaned = 0.00148536 Jy ! Component: 2050 - total flux cleaned = 0.00153681 Jy ! Component: 2100 - total flux cleaned = 0.00170707 Jy ! Component: 2150 - total flux cleaned = 0.00175737 Jy ! Component: 2200 - total flux cleaned = 0.00185746 Jy ! Component: 2250 - total flux cleaned = 0.00192376 Jy ! Component: 2300 - total flux cleaned = 0.00202205 Jy ! Component: 2350 - total flux cleaned = 0.00211964 Jy ! Component: 2400 - total flux cleaned = 0.00215178 Jy ! Component: 2450 - total flux cleaned = 0.00227933 Jy ! Component: 2500 - total flux cleaned = 0.00227952 Jy ! Component: 2550 - total flux cleaned = 0.00235776 Jy ! Component: 2600 - total flux cleaned = 0.00245139 Jy ! Component: 2650 - total flux cleaned = 0.00245143 Jy ! Component: 2700 - total flux cleaned = 0.00254322 Jy ! Component: 2750 - total flux cleaned = 0.0025886 Jy ! Component: 2800 - total flux cleaned = 0.00267895 Jy ! Component: 2850 - total flux cleaned = 0.00269395 Jy ! Component: 2900 - total flux cleaned = 0.00276787 Jy ! Component: 2950 - total flux cleaned = 0.00279731 Jy ! Component: 3000 - total flux cleaned = 0.00279746 Jy ! Component: 3050 - total flux cleaned = 0.00284086 Jy ! Component: 3100 - total flux cleaned = 0.00294113 Jy ! Component: 3150 - total flux cleaned = 0.00296953 Jy ! Component: 3200 - total flux cleaned = 0.00298367 Jy ! Component: 3250 - total flux cleaned = 0.00298367 Jy ! Component: 3300 - total flux cleaned = 0.0030114 Jy ! Component: 3350 - total flux cleaned = 0.00308027 Jy ! Component: 3400 - total flux cleaned = 0.00306651 Jy ! Component: 3450 - total flux cleaned = 0.00309348 Jy ! Component: 3500 - total flux cleaned = 0.00306645 Jy ! Component: 3550 - total flux cleaned = 0.00312002 Jy ! Component: 3600 - total flux cleaned = 0.00317321 Jy ! Component: 3650 - total flux cleaned = 0.00314693 Jy ! Component: 3700 - total flux cleaned = 0.00318609 Jy ! Component: 3750 - total flux cleaned = 0.00325125 Jy ! Component: 3800 - total flux cleaned = 0.00326408 Jy ! Component: 3850 - total flux cleaned = 0.00326398 Jy ! Component: 3900 - total flux cleaned = 0.00334044 Jy ! Component: 3950 - total flux cleaned = 0.00335305 Jy ! Component: 4000 - total flux cleaned = 0.00334059 Jy ! Component: 4050 - total flux cleaned = 0.00337793 Jy ! Total flux subtracted in 4096 components = 0.00342733 Jy ! Clean residual min=-0.000643 max=0.000655 Jy/beam ! Clean residual mean=0.000000 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.936573 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 445 components and 0.936573 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0724-0715_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8187 x 1.98 at -3.713 degrees (North through East) ! Clean map min=-0.002549 max=0.78844 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0724-0715_X_map.fits wmodel /vlbi/uf001/uva//J0724-0715_X_map.mod ! Writing 445 model components to file: /vlbi/uf001/uva//J0724-0715_X_map.mod wobs /vlbi/uf001/uva//J0724-0715_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0724-0715_X_uvs.fits wwins /vlbi/uf001/uva//J0724-0715_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J0724-0715_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.788445 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221077 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0841191 0.0841191 0.168238 0.336476 0.672953 1.34591 2.69181 5.38362 10.7672 21.5345 43.069 86.1379 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.788 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3566.37 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0724-0715_X_dfm.log closed on Sun Jan 13 23:25:51 2019