! Started logfile: /vlbi/uf001/uva//J0722-3038_S_b_dfm.log on Sun Jan 13 23:25:06 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0722-3038_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0722-3038_S_b_uva.fits
! AN table 1: 148 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.854569 visibilities/baseline/integration-bin.
! Found source: J0722-3038
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7968 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0722-3038_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 101 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 101 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 101 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009513Jy  sigma=13.750559
! Fit after  self-cal, rms=0.914055Jy  sigma=12.390238
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.033 mas, bmaj=25.63 mas, bpa=-7.222 degrees
! Estimated noise=1.33545 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0661074 Jy
! Component: 100  -  total flux cleaned = 0.0930187 Jy
! Total flux subtracted in 100 components = 0.0930187 Jy
! Clean residual min=-0.007999 max=0.014444 Jy/beam
! Clean residual mean=0.000085 rms=0.003403 Jy/beam
! Combined flux in latest and established models = 0.0930187 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0930187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104197Jy  sigma=1.295094
! Fit after  self-cal, rms=0.103408Jy  sigma=1.285130
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.11 mas, bmaj=25.98 mas, bpa=-5.299 degrees
! Estimated noise=0.602858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023338 Jy
! Component: 100  -  total flux cleaned = 0.0361676 Jy
! Component: 150  -  total flux cleaned = 0.0441309 Jy
! Component: 200  -  total flux cleaned = 0.0493907 Jy
! Total flux subtracted in 200 components = 0.0493907 Jy
! Clean residual min=-0.005737 max=0.007982 Jy/beam
! Clean residual mean=-0.000020 rms=0.001987 Jy/beam
! Combined flux in latest and established models = 0.142409 Jy
! Performing phase self-cal
! Adding 100 model components to the UV plane model.
! The established model now contains 129 components and 0.142409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098328Jy  sigma=1.198992
! Fit after  self-cal, rms=0.098084Jy  sigma=1.196042
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.11 x 25.98 at -5.299 degrees (North through East)
! Clean map  min=-0.0054221  max=0.085367 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     HN        0.85     KP        0.94     LA        0.88     
!   NL        1.40     OV        1.12     PT        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     HN        0.88     KP        0.97     LA        0.87     
!   NL        1.29     OV        0.86     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.85     KP        1.00     LA        0.89     
!   NL        1.26     OV        1.06     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.098084Jy  sigma=1.196042
! Fit after  self-cal, rms=0.099038Jy  sigma=1.175433
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.975 mas, bmaj=26.78 mas, bpa=-5.611 degrees
! Estimated noise=0.607312 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158042 Jy
! Component: 100  -  total flux cleaned = 0.00165769 Jy
! Component: 150  -  total flux cleaned = 0.0015981 Jy
! Component: 200  -  total flux cleaned = 0.00154402 Jy
! Total flux subtracted in 200 components = 0.00154402 Jy
! Clean residual min=-0.004071 max=0.003920 Jy/beam
! Clean residual mean=0.000001 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.143953 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 152 components and 0.143953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098937Jy  sigma=1.174135
! Fit after  self-cal, rms=0.099110Jy  sigma=1.172871
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099110Jy  sigma=1.172871
! Fit after  self-cal, rms=0.103686Jy  sigma=1.165176
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.862 mas, bmaj=28.13 mas, bpa=-6.209 degrees
! Estimated noise=0.609886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00039912 Jy
! Component: 100  -  total flux cleaned = 0.000583158 Jy
! Component: 150  -  total flux cleaned = 0.000758483 Jy
! Component: 200  -  total flux cleaned = 0.000910256 Jy
! Total flux subtracted in 200 components = 0.000910256 Jy
! Clean residual min=-0.002922 max=0.003216 Jy/beam
! Clean residual mean=-0.000002 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.144864 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 168 components and 0.144864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103676Jy  sigma=1.165068
! Fit after  self-cal, rms=0.103699Jy  sigma=1.164409
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.68322e-05 Jy
! Component: 100  -  total flux cleaned = 9.67113e-05 Jy
! Component: 150  -  total flux cleaned = 0.000146301 Jy
! Component: 200  -  total flux cleaned = 0.000161182 Jy
! Total flux subtracted in 200 components = 0.000161182 Jy
! Clean residual min=-0.003066 max=0.003263 Jy/beam
! Clean residual mean=-0.000002 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.145025 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 182 components and 0.145025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103693Jy  sigma=1.164316
! Fit after  self-cal, rms=0.103689Jy  sigma=1.164298
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103689Jy  sigma=1.164298
! Fit after  self-cal, rms=0.103612Jy  sigma=1.164148
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.805 mas, bmaj=28.2 mas, bpa=-6.261 degrees
! Estimated noise=0.607017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000729541 Jy
! Component: 100  -  total flux cleaned = 0.000842909 Jy
! Component: 150  -  total flux cleaned = 0.000936143 Jy
! Component: 200  -  total flux cleaned = 0.00101904 Jy
! Total flux subtracted in 200 components = 0.00101904 Jy
! Clean residual min=-0.002897 max=0.003196 Jy/beam
! Clean residual mean=-0.000002 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.146044 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 195 components and 0.146044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103605Jy  sigma=1.164034
! Fit after  self-cal, rms=0.103599Jy  sigma=1.164002
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.52513e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104266 Jy
! Component: 150  -  total flux cleaned = 0.000128851 Jy
! Component: 200  -  total flux cleaned = 0.000163154 Jy
! Total flux subtracted in 200 components = 0.000163154 Jy
! Clean residual min=-0.002952 max=0.003240 Jy/beam
! Clean residual mean=-0.000001 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.146207 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 203 components and 0.146207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103595Jy  sigma=1.163956
! Fit after  self-cal, rms=0.103594Jy  sigma=1.163949
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103594Jy  sigma=1.163949
! Fit after  self-cal, rms=0.102870Jy  sigma=1.163862
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.99 mas, bmaj=29.35 mas, bpa=-2.666 degrees
! Estimated noise=0.644519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787502 Jy
! Component: 100  -  total flux cleaned = 0.000908778 Jy
! Component: 150  -  total flux cleaned = 0.000993753 Jy
! Component: 200  -  total flux cleaned = 0.00106984 Jy
! Total flux subtracted in 200 components = 0.00106984 Jy
! Clean residual min=-0.002547 max=0.003484 Jy/beam
! Clean residual mean=-0.000002 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.147277 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 208 components and 0.147277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102866Jy  sigma=1.163788
! Fit after  self-cal, rms=0.102856Jy  sigma=1.163767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.792e-05 Jy
! Component: 100  -  total flux cleaned = 0.000112543 Jy
! Component: 150  -  total flux cleaned = 0.000144147 Jy
! Component: 200  -  total flux cleaned = 0.00018164 Jy
! Total flux subtracted in 200 components = 0.00018164 Jy
! Clean residual min=-0.002592 max=0.003525 Jy/beam
! Clean residual mean=-0.000003 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.147458 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 216 components and 0.147458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102855Jy  sigma=1.163766
! Fit after  self-cal, rms=0.102852Jy  sigma=1.163742
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.754 mas, bmaj=28.17 mas, bpa=-6.274 degrees
! Estimated noise=0.604013 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.754 x 28.17 at -6.274 degrees (North through East)
! Clean map  min=-0.0028772  max=0.08353 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.674 mas, bmaj=28.08 mas, bpa=-7.786 degrees
! Estimated noise=1.35027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0674522 Jy
! Component: 100  -  total flux cleaned = 0.0960529 Jy
! Component: 150  -  total flux cleaned = 0.113469 Jy
! Component: 200  -  total flux cleaned = 0.124617 Jy
! Total flux subtracted in 200 components = 0.124617 Jy
! Clean residual min=-0.005408 max=0.007197 Jy/beam
! Clean residual mean=0.000046 rms=0.001755 Jy/beam
! Combined flux in latest and established models = 0.124617 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 80 model components to the UV plane model.
! The established model now contains 80 components and 0.124617 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.754 mas, bmaj=28.17 mas, bpa=-6.274 degrees
! Estimated noise=0.604013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911217 Jy
! Component: 100  -  total flux cleaned = 0.0143898 Jy
! Component: 150  -  total flux cleaned = 0.017859 Jy
! Component: 200  -  total flux cleaned = 0.020415 Jy
! Total flux subtracted in 200 components = 0.020415 Jy
! Clean residual min=-0.003258 max=0.002729 Jy/beam
! Clean residual mean=0.000005 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.145033 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 134 components and 0.145033 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.99 mas, bmaj=29.35 mas, bpa=-2.666 degrees
! Estimated noise=0.644519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227029 Jy
! Component: 100  -  total flux cleaned = 0.00333299 Jy
! Component: 150  -  total flux cleaned = 0.00381364 Jy
! Component: 200  -  total flux cleaned = 0.00409503 Jy
! Total flux subtracted in 200 components = 0.00409503 Jy
! Clean residual min=-0.002866 max=0.002780 Jy/beam
! Clean residual mean=-0.000004 rms=0.000851 Jy/beam
! Combined flux in latest and established models = 0.149128 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143247 Jy
! Component: 100  -  total flux cleaned = 0.00030282 Jy
! Component: 150  -  total flux cleaned = 0.000444117 Jy
! Component: 200  -  total flux cleaned = 0.000545915 Jy
! Total flux subtracted in 200 components = 0.000545915 Jy
! Clean residual min=-0.002738 max=0.002659 Jy/beam
! Clean residual mean=-0.000004 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.149674 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 193 components and 0.149673 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.754 mas, bmaj=28.17 mas, bpa=-6.274 degrees
! Estimated noise=0.604013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163323 Jy
! Component: 100  -  total flux cleaned = 0.000198389 Jy
! Component: 150  -  total flux cleaned = 0.000199468 Jy
! Component: 200  -  total flux cleaned = 0.000226767 Jy
! Total flux subtracted in 200 components = 0.000226767 Jy
! Clean residual min=-0.002376 max=0.002419 Jy/beam
! Clean residual mean=-0.000004 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.1499 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 224 components and 0.1499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102787Jy  sigma=1.162954
! Fit after  self-cal, rms=0.102688Jy  sigma=1.162479
wmodel J0722-3038_S_b_map.mod
! Writing 224 model components to file: J0722-3038_S_b_map.mod
wobs   J0722-3038_S_b_uvs.fits
! Writing UV FITS file: J0722-3038_S_b_uvs.fits
wwins  J0722-3038_S_b_map.win
! wwins: Wrote 2 windows to J0722-3038_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000719934 Jy
! Component: 100  -  total flux cleaned = 0.00093552 Jy
! Component: 150  -  total flux cleaned = 0.000819282 Jy
! Component: 200  -  total flux cleaned = 0.00100099 Jy
! Component: 250  -  total flux cleaned = 0.00113746 Jy
! Component: 300  -  total flux cleaned = 0.00129998 Jy
! Component: 350  -  total flux cleaned = 0.0013615 Jy
! Component: 400  -  total flux cleaned = 0.00145071 Jy
! Component: 450  -  total flux cleaned = 0.00162256 Jy
! Component: 500  -  total flux cleaned = 0.00181498 Jy
! Component: 550  -  total flux cleaned = 0.00192171 Jy
! Component: 600  -  total flux cleaned = 0.0020252 Jy
! Component: 650  -  total flux cleaned = 0.00209975 Jy
! Component: 700  -  total flux cleaned = 0.00212342 Jy
! Component: 750  -  total flux cleaned = 0.00217066 Jy
! Component: 800  -  total flux cleaned = 0.00214788 Jy
! Component: 850  -  total flux cleaned = 0.00216997 Jy
! Component: 900  -  total flux cleaned = 0.00210441 Jy
! Component: 950  -  total flux cleaned = 0.00204038 Jy
! Component: 1000  -  total flux cleaned = 0.0019366 Jy
! Component: 1050  -  total flux cleaned = 0.00189602 Jy
! Component: 1100  -  total flux cleaned = 0.00181623 Jy
! Component: 1150  -  total flux cleaned = 0.00175756 Jy
! Component: 1200  -  total flux cleaned = 0.0016426 Jy
! Component: 1250  -  total flux cleaned = 0.00152989 Jy
! Component: 1300  -  total flux cleaned = 0.00141907 Jy
! Component: 1350  -  total flux cleaned = 0.00134603 Jy
! Component: 1400  -  total flux cleaned = 0.00120317 Jy
! Component: 1450  -  total flux cleaned = 0.00111532 Jy
! Component: 1500  -  total flux cleaned = 0.00101151 Jy
! Component: 1550  -  total flux cleaned = 0.000892583 Jy
! Component: 1600  -  total flux cleaned = 0.000842368 Jy
! Component: 1650  -  total flux cleaned = 0.000743347 Jy
! Component: 1700  -  total flux cleaned = 0.00064572 Jy
! Component: 1750  -  total flux cleaned = 0.000597488 Jy
! Component: 1800  -  total flux cleaned = 0.000470614 Jy
! Component: 1850  -  total flux cleaned = 0.000392535 Jy
! Component: 1900  -  total flux cleaned = 0.000284343 Jy
! Component: 1950  -  total flux cleaned = 0.000223117 Jy
! Component: 2000  -  total flux cleaned = 0.000147184 Jy
! Component: 2050  -  total flux cleaned = 8.71403e-05 Jy
! Component: 2100  -  total flux cleaned = 4.25884e-05 Jy
! Component: 2150  -  total flux cleaned = -1.68117e-06 Jy
! Component: 2200  -  total flux cleaned = -1.64129e-05 Jy
! Component: 2250  -  total flux cleaned = -8.9168e-05 Jy
! Component: 2300  -  total flux cleaned = -0.000132518 Jy
! Component: 2350  -  total flux cleaned = -0.000190084 Jy
! Component: 2400  -  total flux cleaned = -0.000261488 Jy
! Component: 2450  -  total flux cleaned = -0.000318107 Jy
! Component: 2500  -  total flux cleaned = -0.000360449 Jy
! Component: 2550  -  total flux cleaned = -0.000360341 Jy
! Component: 2600  -  total flux cleaned = -0.000416257 Jy
! Component: 2650  -  total flux cleaned = -0.000430252 Jy
! Component: 2700  -  total flux cleaned = -0.000471931 Jy
! Component: 2750  -  total flux cleaned = -0.00048567 Jy
! Component: 2800  -  total flux cleaned = -0.000554614 Jy
! Component: 2850  -  total flux cleaned = -0.000540871 Jy
! Component: 2900  -  total flux cleaned = -0.000595652 Jy
! Component: 2950  -  total flux cleaned = -0.000582054 Jy
! Component: 3000  -  total flux cleaned = -0.000636535 Jy
! Component: 3050  -  total flux cleaned = -0.000677253 Jy
! Component: 3100  -  total flux cleaned = -0.000717792 Jy
! Component: 3150  -  total flux cleaned = -0.00074486 Jy
! Component: 3200  -  total flux cleaned = -0.000758351 Jy
! Component: 3250  -  total flux cleaned = -0.000812354 Jy
! Component: 3300  -  total flux cleaned = -0.000839287 Jy
! Component: 3350  -  total flux cleaned = -0.000852741 Jy
! Component: 3400  -  total flux cleaned = -0.000906778 Jy
! Component: 3450  -  total flux cleaned = -0.000933822 Jy
! Component: 3500  -  total flux cleaned = -0.000987907 Jy
! Component: 3550  -  total flux cleaned = -0.00104193 Jy
! Component: 3600  -  total flux cleaned = -0.0010825 Jy
! Component: 3650  -  total flux cleaned = -0.00112303 Jy
! Component: 3700  -  total flux cleaned = -0.00119061 Jy
! Component: 3750  -  total flux cleaned = -0.0012311 Jy
! Component: 3800  -  total flux cleaned = -0.0012717 Jy
! Component: 3850  -  total flux cleaned = -0.00133944 Jy
! Component: 3900  -  total flux cleaned = -0.00138017 Jy
! Component: 3950  -  total flux cleaned = -0.00143452 Jy
! Component: 4000  -  total flux cleaned = -0.00150253 Jy
! Component: 4050  -  total flux cleaned = -0.00152971 Jy
! Total flux subtracted in 4096 components = -0.0016251 Jy
! Clean residual min=-0.001090 max=0.000757 Jy/beam
! Clean residual mean=-0.000015 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.148275 Jy
keep
! Adding 341 model components to the UV plane model.
! The established model now contains 565 components and 0.148275 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0722-3038_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.754 x 28.17 at -6.274 degrees (North through East)
! Clean map  min=-0.0024943  max=0.084663 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0722-3038_S_b_map.fits
wmodel /vlbi/uf001/uva//J0722-3038_S_b_map.mod
! Writing 565 model components to file: /vlbi/uf001/uva//J0722-3038_S_b_map.mod
wobs   /vlbi/uf001/uva//J0722-3038_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0722-3038_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0722-3038_S_b_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0722-3038_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0846626 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000281359 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.99699 0.99699 1.99398 3.98796 7.97592 15.9518 31.9037 63.8074
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.084 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  300.905 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0722-3038_S_b_dfm.log closed on Sun Jan 13 23:25:11 2019