! Started logfile: /vlbi/uf001/uva//J0722+3722_X_dfm.log on Sun Jan 13 23:24:55 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0722+3722_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0722+3722_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.97619 visibilities/baseline/integration-bin.
! Found source: J0722+3722
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22140 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0722+3722_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007360Jy  sigma=23.659376
! Fit after  self-cal, rms=0.914928Jy  sigma=21.492196
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7496 mas, bmaj=1.287 mas, bpa=3.367 degrees
! Estimated noise=0.379278 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0604452 Jy
! Component: 100  -  total flux cleaned = 0.0814512 Jy
! Total flux subtracted in 100 components = 0.0814512 Jy
! Clean residual min=-0.005406 max=0.012860 Jy/beam
! Clean residual mean=0.000001 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.0814512 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0814512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064049Jy  sigma=1.436398
! Fit after  self-cal, rms=0.063415Jy  sigma=1.422665
! Inverting map 
! Added new window around map position (-1, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013816 Jy
! Component: 100  -  total flux cleaned = 0.0214161 Jy
! Total flux subtracted in 100 components = 0.0214161 Jy
! Clean residual min=-0.003869 max=0.004825 Jy/beam
! Clean residual mean=-0.000001 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.102867 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.102867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059215Jy  sigma=1.321002
! Fit after  self-cal, rms=0.059016Jy  sigma=1.316425
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00559799 Jy
! Component: 100  -  total flux cleaned = 0.00899436 Jy
! Total flux subtracted in 100 components = 0.00899436 Jy
! Clean residual min=-0.003641 max=0.004123 Jy/beam
! Clean residual mean=-0.000001 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.111862 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.111862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058157Jy  sigma=1.296735
! Fit after  self-cal, rms=0.058116Jy  sigma=1.295708
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9455 mas, bmaj=1.573 mas, bpa=2.378 degrees
! Estimated noise=0.221582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.8, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00599678 Jy
! Component: 100  -  total flux cleaned = 0.00987772 Jy
! Component: 150  -  total flux cleaned = 0.0123298 Jy
! Component: 200  -  total flux cleaned = 0.013812 Jy
! Total flux subtracted in 200 components = 0.013812 Jy
! Clean residual min=-0.003298 max=0.004829 Jy/beam
! Clean residual mean=-0.000006 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.125674 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 54 components and 0.125674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057336Jy  sigma=1.277857
! Fit after  self-cal, rms=0.057280Jy  sigma=1.276421
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9455 x 1.573 at 2.378 degrees (North through East)
! Clean map  min=-0.0029531  max=0.082443 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.01     HN        0.93     KP        1.02     
!   LA        1.03     MK        1.06     NL        1.09     OV        0.90     
!   PT        0.86     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.03     HN        0.93     KP        0.97     
!   LA        1.04     MK        1.00     NL        1.10     OV        0.91     
!   PT        0.88     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.00     HN        0.96     KP        1.00     
!   LA        1.03     MK        1.03     NL        1.09     OV        0.89     
!   PT        0.85     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.00     HN        0.92     KP        0.98     
!   LA        1.04     MK        0.98     NL        1.09     OV        0.90     
!   PT        0.88     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        0.99     HN        0.94     KP        0.98     
!   LA        1.03     MK        0.98     NL        1.09     OV        0.93     
!   PT        0.90     SC        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.98     HN        0.93     KP        0.97     
!   LA        1.04     MK        1.06     NL        1.07     OV        0.91     
!   PT        0.85     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.00     HN        0.94     KP        1.00     
!   LA        1.07     MK        1.05     NL        1.07     OV        0.91     
!   PT        0.87     SC        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.25     FD        0.92     HN        0.93     KP        1.00     
!   LA        1.06     MK        0.99     NL        1.12     OV        0.93     
!   PT        0.88     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.96     HN        0.98     KP        0.99     
!   LA        1.07     MK        1.00     NL        1.08     OV        0.89     
!   PT        0.85     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.98     HN        0.97     KP        1.03     
!   LA        1.08     MK        1.03     NL        1.06     OV        0.90     
!   PT        0.83     SC        0.92     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        1.04     HN        0.90     KP        0.94     
!   LA        1.04     MK        0.98     NL        1.11     OV        0.93     
!   PT        0.83     SC        0.87     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        1.00     HN        0.96     KP        0.98     
!   LA        1.08     MK        1.05     NL        1.06     OV        0.90     
!   PT        0.85     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.057280Jy  sigma=1.276421
! Fit after  self-cal, rms=0.055181Jy  sigma=1.245531
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9378 mas, bmaj=1.583 mas, bpa=2.831 degrees
! Estimated noise=0.218429 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.2688e-05 Jy
! Component: 100  -  total flux cleaned = -0.000466125 Jy
! Component: 150  -  total flux cleaned = -0.000842094 Jy
! Component: 200  -  total flux cleaned = -0.00104258 Jy
! Total flux subtracted in 200 components = -0.00104258 Jy
! Clean residual min=-0.002633 max=0.002290 Jy/beam
! Clean residual mean=-0.000003 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.124631 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.124631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055078Jy  sigma=1.243473
! Fit after  self-cal, rms=0.055126Jy  sigma=1.242703
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055126Jy  sigma=1.242703
! Fit after  self-cal, rms=0.057757Jy  sigma=1.219236
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9387 mas, bmaj=1.577 mas, bpa=2.607 degrees
! Estimated noise=0.220393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000872335 Jy
! Component: 100  -  total flux cleaned = -0.00100483 Jy
! Component: 150  -  total flux cleaned = -0.00104241 Jy
! Component: 200  -  total flux cleaned = -0.00104403 Jy
! Total flux subtracted in 200 components = -0.00104403 Jy
! Clean residual min=-0.001331 max=0.001242 Jy/beam
! Clean residual mean=-0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.123587 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 83 components and 0.123587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057697Jy  sigma=1.217617
! Fit after  self-cal, rms=0.057779Jy  sigma=1.217148
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000186778 Jy
! Component: 100  -  total flux cleaned = -0.00032547 Jy
! Component: 150  -  total flux cleaned = -0.000326164 Jy
! Component: 200  -  total flux cleaned = -0.000282304 Jy
! Total flux subtracted in 200 components = -0.000282304 Jy
! Clean residual min=-0.001264 max=0.001174 Jy/beam
! Clean residual mean=-0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.123305 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 91 components and 0.123305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057761Jy  sigma=1.216544
! Fit after  self-cal, rms=0.057756Jy  sigma=1.216514
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057756Jy  sigma=1.216514
! Fit after  self-cal, rms=0.058761Jy  sigma=1.215994
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9365 mas, bmaj=1.573 mas, bpa=2.678 degrees
! Estimated noise=0.219472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000660085 Jy
! Component: 100  -  total flux cleaned = -0.000761335 Jy
! Component: 150  -  total flux cleaned = -0.000804392 Jy
! Component: 200  -  total flux cleaned = -0.000804737 Jy
! Total flux subtracted in 200 components = -0.000804737 Jy
! Clean residual min=-0.001221 max=0.001060 Jy/beam
! Clean residual mean=-0.000001 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.1225 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.1225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058739Jy  sigma=1.215472
! Fit after  self-cal, rms=0.058751Jy  sigma=1.215431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000201036 Jy
! Component: 100  -  total flux cleaned = -0.000201923 Jy
! Component: 150  -  total flux cleaned = -0.000187288 Jy
! Component: 200  -  total flux cleaned = -0.000173574 Jy
! Total flux subtracted in 200 components = -0.000173574 Jy
! Clean residual min=-0.001177 max=0.001048 Jy/beam
! Clean residual mean=-0.000001 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.122326 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 94 components and 0.122326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058742Jy  sigma=1.215201
! Fit after  self-cal, rms=0.058740Jy  sigma=1.215191
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058740Jy  sigma=1.215191
! Fit after  self-cal, rms=0.059072Jy  sigma=1.215092
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.108 mas, bmaj=2.655 mas, bpa=-0.1488 degrees
! Estimated noise=0.277914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000410039 Jy
! Component: 100  -  total flux cleaned = -0.000511458 Jy
! Component: 150  -  total flux cleaned = -0.000537602 Jy
! Component: 200  -  total flux cleaned = -0.000549189 Jy
! Total flux subtracted in 200 components = -0.000549189 Jy
! Clean residual min=-0.001281 max=0.001237 Jy/beam
! Clean residual mean=-0.000002 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.121777 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 99 components and 0.121777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059066Jy  sigma=1.214933
! Fit after  self-cal, rms=0.059069Jy  sigma=1.214912
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000167237 Jy
! Component: 100  -  total flux cleaned = -0.000157067 Jy
! Component: 150  -  total flux cleaned = -0.000175268 Jy
! Component: 200  -  total flux cleaned = -0.00018321 Jy
! Total flux subtracted in 200 components = -0.00018321 Jy
! Clean residual min=-0.001282 max=0.001219 Jy/beam
! Clean residual mean=-0.000002 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.121594 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.121594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059067Jy  sigma=1.214856
! Fit after  self-cal, rms=0.059066Jy  sigma=1.214850
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9358 mas, bmaj=1.573 mas, bpa=2.68 degrees
! Estimated noise=0.21918 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9358 x 1.573 at 2.68 degrees (North through East)
! Clean map  min=-0.0010716  max=0.081695 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7402 mas, bmaj=1.28 mas, bpa=3.754 degrees
! Estimated noise=0.375577 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0605289 Jy
! Component: 100  -  total flux cleaned = 0.0845669 Jy
! Component: 150  -  total flux cleaned = 0.0975929 Jy
! Component: 200  -  total flux cleaned = 0.105371 Jy
! Total flux subtracted in 200 components = 0.105371 Jy
! Clean residual min=-0.002206 max=0.004018 Jy/beam
! Clean residual mean=0.000001 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.105371 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.105371 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9358 mas, bmaj=1.573 mas, bpa=2.68 degrees
! Estimated noise=0.21918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00639981 Jy
! Component: 100  -  total flux cleaned = 0.00973858 Jy
! Component: 150  -  total flux cleaned = 0.0117046 Jy
! Component: 200  -  total flux cleaned = 0.0129818 Jy
! Total flux subtracted in 200 components = 0.0129818 Jy
! Clean residual min=-0.001237 max=0.001061 Jy/beam
! Clean residual mean=-0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.118353 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 34 components and 0.118353 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.108 mas, bmaj=2.655 mas, bpa=-0.1488 degrees
! Estimated noise=0.277914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126787 Jy
! Component: 100  -  total flux cleaned = 0.0019903 Jy
! Component: 150  -  total flux cleaned = 0.00245045 Jy
! Component: 200  -  total flux cleaned = 0.00265318 Jy
! Total flux subtracted in 200 components = 0.00265318 Jy
! Clean residual min=-0.001257 max=0.001149 Jy/beam
! Clean residual mean=-0.000003 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.121006 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110451 Jy
! Component: 100  -  total flux cleaned = 0.000187677 Jy
! Component: 150  -  total flux cleaned = 0.000247019 Jy
! Component: 200  -  total flux cleaned = 0.000269072 Jy
! Total flux subtracted in 200 components = 0.000269072 Jy
! Clean residual min=-0.001253 max=0.001159 Jy/beam
! Clean residual mean=-0.000003 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.121275 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 72 components and 0.121275 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9358 mas, bmaj=1.573 mas, bpa=2.68 degrees
! Estimated noise=0.21918 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.37329e-05 Jy
! Component: 100  -  total flux cleaned = -3.42669e-05 Jy
! Component: 150  -  total flux cleaned = -1.78585e-05 Jy
! Component: 200  -  total flux cleaned = -3.34303e-05 Jy
! Total flux subtracted in 200 components = -3.34303e-05 Jy
! Clean residual min=-0.001166 max=0.001013 Jy/beam
! Clean residual mean=-0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.121242 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 85 components and 0.121242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059074Jy  sigma=1.215084
! Fit after  self-cal, rms=0.059062Jy  sigma=1.214970
wmodel J0722+3722_X_map.mod
! Writing 85 model components to file: J0722+3722_X_map.mod
wobs   J0722+3722_X_uvs.fits
! Writing UV FITS file: J0722+3722_X_uvs.fits
wwins  J0722+3722_X_map.win
! wwins: Wrote 3 windows to J0722+3722_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00037151 Jy
! Component: 100  -  total flux cleaned = -0.000650028 Jy
! Component: 150  -  total flux cleaned = -0.000879835 Jy
! Component: 200  -  total flux cleaned = -0.00106726 Jy
! Component: 250  -  total flux cleaned = -0.00118304 Jy
! Component: 300  -  total flux cleaned = -0.00124716 Jy
! Component: 350  -  total flux cleaned = -0.00123127 Jy
! Component: 400  -  total flux cleaned = -0.0012159 Jy
! Component: 450  -  total flux cleaned = -0.00117064 Jy
! Component: 500  -  total flux cleaned = -0.00114091 Jy
! Component: 550  -  total flux cleaned = -0.00109698 Jy
! Component: 600  -  total flux cleaned = -0.00106793 Jy
! Component: 650  -  total flux cleaned = -0.000967908 Jy
! Component: 700  -  total flux cleaned = -0.00091152 Jy
! Component: 750  -  total flux cleaned = -0.00080047 Jy
! Component: 800  -  total flux cleaned = -0.000759384 Jy
! Component: 850  -  total flux cleaned = -0.00070515 Jy
! Component: 900  -  total flux cleaned = -0.000638133 Jy
! Component: 950  -  total flux cleaned = -0.000558618 Jy
! Component: 1000  -  total flux cleaned = -0.000532376 Jy
! Component: 1050  -  total flux cleaned = -0.000493188 Jy
! Component: 1100  -  total flux cleaned = -0.000428624 Jy
! Component: 1150  -  total flux cleaned = -0.000390269 Jy
! Component: 1200  -  total flux cleaned = -0.000352358 Jy
! Component: 1250  -  total flux cleaned = -0.000289654 Jy
! Component: 1300  -  total flux cleaned = -0.000227608 Jy
! Component: 1350  -  total flux cleaned = -0.000202905 Jy
! Component: 1400  -  total flux cleaned = -0.000190847 Jy
! Component: 1450  -  total flux cleaned = -0.000142304 Jy
! Component: 1500  -  total flux cleaned = -0.000154346 Jy
! Component: 1550  -  total flux cleaned = -9.45739e-05 Jy
! Component: 1600  -  total flux cleaned = -2.3788e-05 Jy
! Component: 1650  -  total flux cleaned = -4.73949e-05 Jy
! Component: 1700  -  total flux cleaned = -1.22989e-05 Jy
! Component: 1750  -  total flux cleaned = -6.9508e-07 Jy
! Component: 1800  -  total flux cleaned = -7.43848e-07 Jy
! Component: 1850  -  total flux cleaned = 2.21809e-05 Jy
! Component: 1900  -  total flux cleaned = 2.2207e-05 Jy
! Component: 1950  -  total flux cleaned = 3.34984e-05 Jy
! Component: 2000  -  total flux cleaned = 3.3551e-05 Jy
! Component: 2050  -  total flux cleaned = 2.25353e-05 Jy
! Component: 2100  -  total flux cleaned = 5.57829e-05 Jy
! Component: 2150  -  total flux cleaned = 5.57354e-05 Jy
! Component: 2200  -  total flux cleaned = 5.57787e-05 Jy
! Component: 2250  -  total flux cleaned = 5.56993e-05 Jy
! Component: 2300  -  total flux cleaned = 3.42152e-05 Jy
! Component: 2350  -  total flux cleaned = 3.43144e-05 Jy
! Component: 2400  -  total flux cleaned = 2.3697e-05 Jy
! Component: 2450  -  total flux cleaned = 6.58937e-05 Jy
! Component: 2500  -  total flux cleaned = 1.33841e-05 Jy
! Component: 2550  -  total flux cleaned = 2.3808e-05 Jy
! Component: 2600  -  total flux cleaned = 3.42111e-05 Jy
! Component: 2650  -  total flux cleaned = 1.34771e-05 Jy
! Component: 2700  -  total flux cleaned = 6.46314e-05 Jy
! Component: 2750  -  total flux cleaned = 1.36319e-05 Jy
! Component: 2800  -  total flux cleaned = 5.42416e-05 Jy
! Component: 2850  -  total flux cleaned = 3.66826e-06 Jy
! Component: 2900  -  total flux cleaned = 6.39968e-05 Jy
! Component: 2950  -  total flux cleaned = 1.4079e-05 Jy
! Component: 3000  -  total flux cleaned = 4.39374e-05 Jy
! Component: 3050  -  total flux cleaned = 1.42578e-05 Jy
! Component: 3100  -  total flux cleaned = 5.35376e-05 Jy
! Component: 3150  -  total flux cleaned = 2.41776e-05 Jy
! Component: 3200  -  total flux cleaned = 1.44771e-05 Jy
! Component: 3250  -  total flux cleaned = 2.40929e-05 Jy
! Component: 3300  -  total flux cleaned = -4.3166e-05 Jy
! Component: 3350  -  total flux cleaned = -4.31524e-05 Jy
! Component: 3400  -  total flux cleaned = 3.31268e-05 Jy
! Component: 3450  -  total flux cleaned = 4.26132e-05 Jy
! Component: 3500  -  total flux cleaned = -4.61658e-06 Jy
! Component: 3550  -  total flux cleaned = 2.35125e-05 Jy
! Component: 3600  -  total flux cleaned = 2.3478e-05 Jy
! Component: 3650  -  total flux cleaned = 4.20201e-05 Jy
! Component: 3700  -  total flux cleaned = 6.97725e-05 Jy
! Component: 3750  -  total flux cleaned = -1.31683e-05 Jy
! Component: 3800  -  total flux cleaned = -3.15379e-05 Jy
! Component: 3850  -  total flux cleaned = -2.24062e-05 Jy
! Component: 3900  -  total flux cleaned = -6.7874e-05 Jy
! Component: 3950  -  total flux cleaned = -4.97097e-05 Jy
! Component: 4000  -  total flux cleaned = -8.56561e-05 Jy
! Component: 4050  -  total flux cleaned = -4.98297e-05 Jy
! Total flux subtracted in 4096 components = -9.44966e-05 Jy
! Clean residual min=-0.000536 max=0.000546 Jy/beam
! Clean residual mean=-0.000001 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.121147 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 388 components and 0.121147 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0722+3722_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9358 x 1.573 at 2.68 degrees (North through East)
! Clean map  min=-0.00083546  max=0.081829 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0722+3722_X_map.fits
wmodel /vlbi/uf001/uva//J0722+3722_X_map.mod
! Writing 388 model components to file: /vlbi/uf001/uva//J0722+3722_X_map.mod
wobs   /vlbi/uf001/uva//J0722+3722_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0722+3722_X_uvs.fits
wwins  /vlbi/uf001/uva//J0722+3722_X_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0722+3722_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0818294 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000151351 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.554879 0.554879 1.10976 2.21952 4.43903 8.87807 17.7561 35.5123 71.0245
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.081 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  540.658 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0722+3722_X_dfm.log closed on Sun Jan 13 23:25:00 2019