! Started logfile: /vlbi/uf001/uva//J0719-3928_S_b_dfm.log on Sun Jan 13 23:23:11 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0719-3928_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0719-3928_S_b_uva.fits
! AN table 1: 148 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.789865 visibilities/baseline/integration-bin.
! Found source: J0719-3928
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3507 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0719-3928_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.047801Jy  sigma=13.550701
! Fit after  self-cal, rms=0.805120Jy  sigma=10.208680
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.722 mas, bmaj=49.71 mas, bpa=-15.14 degrees
! Estimated noise=1.43502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153135 Jy
! Component: 100  -  total flux cleaned = 0.220318 Jy
! Total flux subtracted in 100 components = 0.220318 Jy
! Clean residual min=-0.022487 max=0.034639 Jy/beam
! Clean residual mean=-0.000827 rms=0.010971 Jy/beam
! Combined flux in latest and established models = 0.220318 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 57 components and 0.220318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118024Jy  sigma=1.501415
! Fit after  self-cal, rms=0.116674Jy  sigma=1.488375
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.518 mas, bmaj=44.12 mas, bpa=-12.72 degrees
! Estimated noise=0.955134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0523317 Jy
! Component: 100  -  total flux cleaned = 0.0810535 Jy
! Component: 150  -  total flux cleaned = 0.0898959 Jy
! Component: 200  -  total flux cleaned = 0.0934093 Jy
! Total flux subtracted in 200 components = 0.0934093 Jy
! Clean residual min=-0.007142 max=0.007174 Jy/beam
! Clean residual mean=-0.000551 rms=0.003426 Jy/beam
! Combined flux in latest and established models = 0.313727 Jy
! Performing phase self-cal
! Adding 123 model components to the UV plane model.
! The established model now contains 177 components and 0.313727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091164Jy  sigma=1.131167
! Fit after  self-cal, rms=0.090694Jy  sigma=1.128234
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.518 x 44.12 at -12.72 degrees (North through East)
! Clean map  min=-0.013357  max=0.20088 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.99     LA        0.93     NL        1.04     OV        1.09     
!   PT        0.98     
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.97     LA        0.94     NL        0.93     OV        0.96     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        1.01     LA        0.92     NL        1.07     OV        1.04     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.090694Jy  sigma=1.128234
! Fit after  self-cal, rms=0.087753Jy  sigma=1.109185
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.584 mas, bmaj=45.14 mas, bpa=-12.96 degrees
! Estimated noise=0.937027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344822 Jy
! Component: 100  -  total flux cleaned = -0.00162935 Jy
! Component: 150  -  total flux cleaned = -0.00285119 Jy
! Component: 200  -  total flux cleaned = -0.00374646 Jy
! Total flux subtracted in 200 components = -0.00374646 Jy
! Clean residual min=-0.001954 max=0.001942 Jy/beam
! Clean residual mean=-0.000102 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.309981 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 270 components and 0.309981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087120Jy  sigma=1.100684
! Fit after  self-cal, rms=0.086955Jy  sigma=1.099822
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086955Jy  sigma=1.099822
! Fit after  self-cal, rms=0.086047Jy  sigma=1.098155
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.511 mas, bmaj=45.14 mas, bpa=-13.04 degrees
! Estimated noise=0.934592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.96728e-05 Jy
! Component: 100  -  total flux cleaned = -0.000626398 Jy
! Component: 150  -  total flux cleaned = -0.00110246 Jy
! Component: 200  -  total flux cleaned = -0.00204639 Jy
! Total flux subtracted in 200 components = -0.00204639 Jy
! Clean residual min=-0.001217 max=0.001216 Jy/beam
! Clean residual mean=-0.000033 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.307935 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 334 components and 0.307935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085798Jy  sigma=1.095122
! Fit after  self-cal, rms=0.085678Jy  sigma=1.094622
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00065418 Jy
! Component: 100  -  total flux cleaned = -0.00105497 Jy
! Component: 150  -  total flux cleaned = -0.00152901 Jy
! Component: 200  -  total flux cleaned = -0.00171218 Jy
! Total flux subtracted in 200 components = -0.00171218 Jy
! Clean residual min=-0.000963 max=0.000974 Jy/beam
! Clean residual mean=-0.000020 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.306222 Jy
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 412 components and 0.306222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085540Jy  sigma=1.093095
! Fit after  self-cal, rms=0.085478Jy  sigma=1.092843
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085478Jy  sigma=1.092843
! Fit after  self-cal, rms=0.084865Jy  sigma=1.092756
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.469 mas, bmaj=45.13 mas, bpa=-13.09 degrees
! Estimated noise=0.931317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173394 Jy
! Component: 100  -  total flux cleaned = -0.000557831 Jy
! Component: 150  -  total flux cleaned = -0.00101501 Jy
! Component: 200  -  total flux cleaned = -0.00122197 Jy
! Total flux subtracted in 200 components = -0.00122197 Jy
! Clean residual min=-0.000799 max=0.000803 Jy/beam
! Clean residual mean=-0.000010 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.305 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 492 components and 0.305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084780Jy  sigma=1.091761
! Fit after  self-cal, rms=0.084741Jy  sigma=1.091604
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000312615 Jy
! Component: 100  -  total flux cleaned = -0.00042909 Jy
! Component: 150  -  total flux cleaned = -0.000332441 Jy
! Component: 200  -  total flux cleaned = -6.02751e-05 Jy
! Total flux subtracted in 200 components = -6.02751e-05 Jy
! Clean residual min=-0.000714 max=0.000719 Jy/beam
! Clean residual mean=-0.000007 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.30494 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 550 components and 0.30494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084678Jy  sigma=1.090906
! Fit after  self-cal, rms=0.084653Jy  sigma=1.090805
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084653Jy  sigma=1.090805
! Fit after  self-cal, rms=0.084227Jy  sigma=1.090784
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.04 mas, bmaj=46.21 mas, bpa=-11.39 degrees
! Estimated noise=0.934859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.01843e-05 Jy
! Component: 100  -  total flux cleaned = -8.82887e-05 Jy
! Component: 150  -  total flux cleaned = -9.04216e-05 Jy
! Component: 200  -  total flux cleaned = -5.89077e-05 Jy
! Total flux subtracted in 200 components = -5.89077e-05 Jy
! Clean residual min=-0.000524 max=0.000526 Jy/beam
! Clean residual mean=-0.000009 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.304881 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 608 components and 0.304881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084188Jy  sigma=1.090319
! Fit after  self-cal, rms=0.084177Jy  sigma=1.090277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112415 Jy
! Component: 100  -  total flux cleaned = 0.000111439 Jy
! Component: 150  -  total flux cleaned = 0.000237854 Jy
! Component: 200  -  total flux cleaned = 0.000326277 Jy
! Total flux subtracted in 200 components = 0.000326277 Jy
! Clean residual min=-0.000482 max=0.000483 Jy/beam
! Clean residual mean=-0.000008 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.305208 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 640 components and 0.305208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084144Jy  sigma=1.089903
! Fit after  self-cal, rms=0.084136Jy  sigma=1.089866
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.438 mas, bmaj=45.15 mas, bpa=-13.13 degrees
! Estimated noise=0.928735 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.438 x 45.15 at -13.13 degrees (North through East)
! Clean map  min=-0.0052612  max=0.19329 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.741 mas, bmaj=50.19 mas, bpa=-15.18 degrees
! Estimated noise=1.38998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150385 Jy
! Component: 100  -  total flux cleaned = 0.216156 Jy
! Component: 150  -  total flux cleaned = 0.255275 Jy
! Component: 200  -  total flux cleaned = 0.274476 Jy
! Total flux subtracted in 200 components = 0.274476 Jy
! Clean residual min=-0.013908 max=0.013829 Jy/beam
! Clean residual mean=-0.000460 rms=0.005507 Jy/beam
! Combined flux in latest and established models = 0.274475 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 101 model components to the UV plane model.
! The established model now contains 101 components and 0.274475 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.438 mas, bmaj=45.15 mas, bpa=-13.13 degrees
! Estimated noise=0.928735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188656 Jy
! Component: 100  -  total flux cleaned = 0.0194232 Jy
! Component: 150  -  total flux cleaned = 0.015402 Jy
! Component: 200  -  total flux cleaned = 0.0116776 Jy
! Total flux subtracted in 200 components = 0.0116776 Jy
! Clean residual min=-0.004604 max=0.004607 Jy/beam
! Clean residual mean=-0.000281 rms=0.002131 Jy/beam
! Combined flux in latest and established models = 0.286153 Jy
! Adding 107 model components to the UV plane model.
! The established model now contains 200 components and 0.286153 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.04 mas, bmaj=46.21 mas, bpa=-11.39 degrees
! Estimated noise=0.934859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000635287 Jy
! Component: 100  -  total flux cleaned = 0.00041466 Jy
! Component: 150  -  total flux cleaned = -5.02209e-05 Jy
! Component: 200  -  total flux cleaned = -0.00174523 Jy
! Total flux subtracted in 200 components = -0.00174523 Jy
! Clean residual min=-0.001830 max=0.001836 Jy/beam
! Clean residual mean=-0.000114 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.284408 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000731913 Jy
! Component: 100  -  total flux cleaned = -0.0013616 Jy
! Component: 150  -  total flux cleaned = -0.00191688 Jy
! Component: 200  -  total flux cleaned = -0.00236516 Jy
! Total flux subtracted in 200 components = -0.00236516 Jy
! Clean residual min=-0.001199 max=0.001196 Jy/beam
! Clean residual mean=-0.000079 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.282043 Jy
! Adding 170 model components to the UV plane model.
! The established model now contains 358 components and 0.282043 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.438 mas, bmaj=45.15 mas, bpa=-13.13 degrees
! Estimated noise=0.928735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000396228 Jy
! Component: 100  -  total flux cleaned = -0.000918911 Jy
! Component: 150  -  total flux cleaned = -0.0012587 Jy
! Component: 200  -  total flux cleaned = -0.00152455 Jy
! Total flux subtracted in 200 components = -0.00152455 Jy
! Clean residual min=-0.000863 max=0.000847 Jy/beam
! Clean residual mean=-0.000023 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.280518 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 420 components and 0.280518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084212Jy  sigma=1.090651
! Fit after  self-cal, rms=0.084186Jy  sigma=1.090434
wmodel J0719-3928_S_b_map.mod
! Writing 420 model components to file: J0719-3928_S_b_map.mod
wobs   J0719-3928_S_b_uvs.fits
! Writing UV FITS file: J0719-3928_S_b_uvs.fits
wwins  J0719-3928_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J0719-3928_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.438 x 45.15 at -13.13 degrees (North through East)
! Clean map  min=-0.005987  max=0.18389 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0719-3928_S_b_map.fits
wmodel /vlbi/uf001/uva//J0719-3928_S_b_map.mod
! Writing 420 model components to file: /vlbi/uf001/uva//J0719-3928_S_b_map.mod
wobs   /vlbi/uf001/uva//J0719-3928_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0719-3928_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0719-3928_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.183895 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000429536 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.700732 0.700732 1.40146 2.80293 5.60586 11.2117 22.4234 44.8469 89.6937
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.183 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  428.123 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0719-3928_S_b_dfm.log closed on Sun Jan 13 23:23:15 2019