! Started logfile: /vlbi/uf001/uvm//J0707+3822_X_a_dfm.log on Sun Jan 13 20:59:24 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0707+3822_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0707+3822_X_a_uvm.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! AN table 2: 74 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0707+3822 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 86964 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0707+3822_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001926Jy sigma=24.815239 ! Fit after self-cal, rms=0.974640Jy sigma=24.150312 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7202 mas, bmaj=1.241 mas, bpa=-5.146 degrees ! Estimated noise=0.246385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208507 Jy ! Component: 100 - total flux cleaned = 0.0254121 Jy ! Total flux subtracted in 100 components = 0.0254121 Jy ! Clean residual min=-0.001706 max=0.001668 Jy/beam ! Clean residual mean=0.000001 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0254121 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0254121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053571Jy sigma=1.264115 ! Fit after self-cal, rms=0.051689Jy sigma=1.216659 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418418 Jy ! Component: 100 - total flux cleaned = 0.00468597 Jy ! Total flux subtracted in 100 components = 0.00468597 Jy ! Clean residual min=-0.001492 max=0.001715 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0300981 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0300981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051408Jy sigma=1.210534 ! Fit after self-cal, rms=0.051395Jy sigma=1.210265 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9714 mas, bmaj=1.598 mas, bpa=-2.566 degrees ! Estimated noise=0.0989464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177268 Jy ! Component: 100 - total flux cleaned = 0.00278577 Jy ! Component: 150 - total flux cleaned = 0.00340123 Jy ! Component: 200 - total flux cleaned = 0.00360315 Jy ! Total flux subtracted in 200 components = 0.00360315 Jy ! Clean residual min=-0.000742 max=0.001402 Jy/beam ! Clean residual mean=0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.0337012 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 28 components and 0.0337012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051333Jy sigma=1.208461 ! Fit after self-cal, rms=0.051289Jy sigma=1.207728 ! Inverting map ! Added new window around map position (-2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129057 Jy ! Component: 100 - total flux cleaned = 0.00205082 Jy ! Component: 150 - total flux cleaned = 0.00223074 Jy ! Component: 200 - total flux cleaned = 0.00234434 Jy ! Total flux subtracted in 200 components = 0.00234434 Jy ! Clean residual min=-0.000779 max=0.000684 Jy/beam ! Clean residual mean=0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.0360455 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 0.0360455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051251Jy sigma=1.206627 ! Fit after self-cal, rms=0.051222Jy sigma=1.206315 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9714 x 1.598 at -2.566 degrees (North through East) ! Clean map min=-0.00071085 max=0.030131 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.04 KP 1.00 ! LA 1.01 MK 1.14 NL 1.16 OV 1.00 ! PT 0.99 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.98 KP 1.01 ! LA 0.96 MK 1.15 NL 1.21 PT 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.12 KP 1.00 ! LA 1.05 MK 1.12 NL 1.32 OV 0.94 ! PT 0.94 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 0.92 KP 1.08 ! LA 0.99 MK 1.18 NL 1.14 PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.01 KP 1.08 ! LA 1.04 MK 1.06 NL 1.24 OV 0.97 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.07 HN 0.96 KP 1.04 ! LA 1.01 MK 1.12 NL 1.17 PT 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.04 HN 1.06 KP 1.05 ! LA 0.96 MK 1.09 NL 1.08 OV 1.02 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.01 HN 0.98 KP 1.12 ! LA 0.98 MK 1.06 NL 1.05 PT 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.03 KP 1.12 ! LA 1.08 MK 1.07 NL 1.10 OV 0.92 ! PT 1.03 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.98 HN 0.96 KP 1.07 ! LA 1.03 MK 1.09 NL 1.06 PT 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.02 KP 1.18 ! LA 0.97 MK 1.07 NL 1.11 OV 0.92 ! PT 1.03 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 1.11 HN 0.87 KP 1.04 ! LA 0.95 MK 1.02 NL 1.11 PT 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.04 KP 1.08 ! LA 1.06 MK 1.14 NL 1.16 OV 0.88 ! PT 0.94 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 HN 0.74 KP 1.03 ! LA 1.03 MK 1.09 NL 1.09 PT 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.99 KP 1.16 ! LA 0.97 MK 1.03 NL 1.20 OV 0.92 ! PT 0.92 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.91 HN 0.84 KP 1.03 ! LA 1.03 MK 1.04 NL 1.07 PT 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 0.92 KP 1.04 ! LA 1.02 MK 1.06 NL 1.19 OV 0.93 ! PT 0.90 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 0.94 HN 0.86 KP 1.06 ! LA 0.99 MK 1.06 NL 1.17 PT 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.89 KP 1.05 ! LA 1.01 MK 0.99 NL 1.12 OV 0.87 ! PT 0.95 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.86 FD 0.91 HN 0.81 KP 0.98 ! LA 1.00 MK 1.03 NL 1.11 PT 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.93 KP 1.07 ! LA 0.98 MK 0.93 NL 1.09 OV 0.93 ! PT 0.93 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.81 FD 0.94 HN 0.85 KP 0.94 ! LA 0.96 MK 0.93 NL 1.20 PT 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.90 HN 0.82 KP 1.00 ! LA 1.05 MK 0.83 NL 1.14 OV 0.87 ! PT 0.87 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 0.94 HN 0.83 KP 0.98 ! LA 0.94 MK 0.91 NL 1.06 PT 0.91 ! ! ! Fit before self-cal, rms=0.051222Jy sigma=1.206315 ! Fit after self-cal, rms=0.050622Jy sigma=1.202773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9726 mas, bmaj=1.591 mas, bpa=-1.895 degrees ! Estimated noise=0.0995276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148709 Jy ! Component: 100 - total flux cleaned = 0.000134137 Jy ! Component: 150 - total flux cleaned = 0.000121079 Jy ! Component: 200 - total flux cleaned = 9.69228e-05 Jy ! Total flux subtracted in 200 components = 9.69228e-05 Jy ! Clean residual min=-0.000470 max=0.000536 Jy/beam ! Clean residual mean=0.000000 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.0361425 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.0361425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050614Jy sigma=1.202585 ! Fit after self-cal, rms=0.050653Jy sigma=1.201760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050653Jy sigma=1.201760 ! Fit after self-cal, rms=0.051071Jy sigma=1.200300 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9758 mas, bmaj=1.582 mas, bpa=-1.56 degrees ! Estimated noise=0.0995611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.84647e-05 Jy ! Component: 100 - total flux cleaned = -1.45731e-05 Jy ! Component: 150 - total flux cleaned = -4.22173e-05 Jy ! Component: 200 - total flux cleaned = -6.72225e-05 Jy ! Total flux subtracted in 200 components = -6.72225e-05 Jy ! Clean residual min=-0.000427 max=0.000505 Jy/beam ! Clean residual mean=0.000001 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.0360752 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.0360752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051067Jy sigma=1.200212 ! Fit after self-cal, rms=0.051117Jy sigma=1.199789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.2, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445431 Jy ! Component: 100 - total flux cleaned = 0.000604786 Jy ! Component: 150 - total flux cleaned = 0.000595165 Jy ! Component: 200 - total flux cleaned = 0.000577153 Jy ! Total flux subtracted in 200 components = 0.000577153 Jy ! Clean residual min=-0.000420 max=0.000475 Jy/beam ! Clean residual mean=0.000001 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.0366524 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.0366524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051111Jy sigma=1.199660 ! Fit after self-cal, rms=0.051111Jy sigma=1.199609 ! Inverting map ! Added new window around map position (11.4, -32.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410139 Jy ! Component: 100 - total flux cleaned = 0.000513129 Jy ! Component: 150 - total flux cleaned = 0.000532987 Jy ! Component: 200 - total flux cleaned = 0.000551431 Jy ! Total flux subtracted in 200 components = 0.000551431 Jy ! Clean residual min=-0.000417 max=0.000474 Jy/beam ! Clean residual mean=0.000000 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0372038 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.0372038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051106Jy sigma=1.199478 ! Fit after self-cal, rms=0.051105Jy sigma=1.199442 ! Inverting map ! Added new window around map position (45.4, 47.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327854 Jy ! Component: 100 - total flux cleaned = 0.00036438 Jy ! Component: 150 - total flux cleaned = 0.000343941 Jy ! Component: 200 - total flux cleaned = 0.000325174 Jy ! Total flux subtracted in 200 components = 0.000325174 Jy ! Clean residual min=-0.000420 max=0.000459 Jy/beam ! Clean residual mean=0.000000 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.037529 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 105 components and 0.037529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051099Jy sigma=1.199318 ! Fit after self-cal, rms=0.051099Jy sigma=1.199287 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051099Jy sigma=1.199287 ! Fit after self-cal, rms=0.051420Jy sigma=1.199158 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9738 mas, bmaj=1.581 mas, bpa=-1.523 degrees ! Estimated noise=0.0996325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245224 Jy ! Component: 100 - total flux cleaned = 0.000266578 Jy ! Component: 150 - total flux cleaned = 0.00024697 Jy ! Component: 200 - total flux cleaned = 0.000218906 Jy ! Total flux subtracted in 200 components = 0.000218906 Jy ! Clean residual min=-0.000415 max=0.000457 Jy/beam ! Clean residual mean=0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.0377479 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 0.0377479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051415Jy sigma=1.199070 ! Fit after self-cal, rms=0.051437Jy sigma=1.198989 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155801 Jy ! Component: 100 - total flux cleaned = 0.000137597 Jy ! Component: 150 - total flux cleaned = 0.000111018 Jy ! Component: 200 - total flux cleaned = 8.56283e-05 Jy ! Total flux subtracted in 200 components = 8.56283e-05 Jy ! Clean residual min=-0.000423 max=0.000440 Jy/beam ! Clean residual mean=0.000000 rms=0.000106 Jy/beam ! Combined flux in latest and established models = 0.0378335 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 115 components and 0.0378335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051434Jy sigma=1.198919 ! Fit after self-cal, rms=0.051434Jy sigma=1.198883 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051434Jy sigma=1.198883 ! Fit after self-cal, rms=0.051554Jy sigma=1.198864 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.172 mas, bmaj=2.535 mas, bpa=4.371 degrees ! Estimated noise=0.125952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.38841e-05 Jy ! Component: 100 - total flux cleaned = -0.000103863 Jy ! Component: 150 - total flux cleaned = -0.000153061 Jy ! Component: 200 - total flux cleaned = -0.000175861 Jy ! Total flux subtracted in 200 components = -0.000175861 Jy ! Clean residual min=-0.000469 max=0.000538 Jy/beam ! Clean residual mean=0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.0376577 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.0376577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051553Jy sigma=1.198834 ! Fit after self-cal, rms=0.051560Jy sigma=1.198794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380564 Jy ! Component: 100 - total flux cleaned = 0.000467375 Jy ! Component: 150 - total flux cleaned = 0.00054037 Jy ! Component: 200 - total flux cleaned = 0.000609403 Jy ! Total flux subtracted in 200 components = 0.000609403 Jy ! Clean residual min=-0.000446 max=0.000487 Jy/beam ! Clean residual mean=0.000001 rms=0.000114 Jy/beam ! Combined flux in latest and established models = 0.0382671 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 149 components and 0.0382671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051557Jy sigma=1.198717 ! Fit after self-cal, rms=0.051554Jy sigma=1.198636 ! Inverting map ! Added new window around map position (-13.8, 49.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357516 Jy ! Component: 100 - total flux cleaned = 0.000426145 Jy ! Component: 150 - total flux cleaned = 0.000415747 Jy ! Component: 200 - total flux cleaned = 0.000424374 Jy ! Total flux subtracted in 200 components = 0.000424374 Jy ! Clean residual min=-0.000426 max=0.000452 Jy/beam ! Clean residual mean=0.000001 rms=0.000109 Jy/beam ! Combined flux in latest and established models = 0.0386914 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 175 components and 0.0386914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051552Jy sigma=1.198577 ! Fit after self-cal, rms=0.051551Jy sigma=1.198544 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9723 mas, bmaj=1.58 mas, bpa=-1.51 degrees ! Estimated noise=0.0996949 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9723 x 1.58 at -1.51 degrees (North through East) ! Clean map min=-0.00041114 max=0.030179 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7217 mas, bmaj=1.225 mas, bpa=-3.999 degrees ! Estimated noise=0.245368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237162 Jy ! Component: 100 - total flux cleaned = 0.0290463 Jy ! Component: 150 - total flux cleaned = 0.0308642 Jy ! Component: 200 - total flux cleaned = 0.031764 Jy ! Total flux subtracted in 200 components = 0.031764 Jy ! Clean residual min=-0.001325 max=0.001276 Jy/beam ! Clean residual mean=0.000001 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.031764 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.031764 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9723 mas, bmaj=1.58 mas, bpa=-1.51 degrees ! Estimated noise=0.0996949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164131 Jy ! Component: 100 - total flux cleaned = 0.00276368 Jy ! Component: 150 - total flux cleaned = 0.00366972 Jy ! Component: 200 - total flux cleaned = 0.00443912 Jy ! Total flux subtracted in 200 components = 0.00443912 Jy ! Clean residual min=-0.000570 max=0.000643 Jy/beam ! Clean residual mean=0.000000 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0362031 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.0362031 Jy ! Inverting map ! Added new window around map position (3.8, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703094 Jy ! Component: 100 - total flux cleaned = 0.00120985 Jy ! Component: 150 - total flux cleaned = 0.00162721 Jy ! Component: 200 - total flux cleaned = 0.00193192 Jy ! Total flux subtracted in 200 components = 0.00193192 Jy ! Clean residual min=-0.000524 max=0.000507 Jy/beam ! Clean residual mean=0.000000 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.038135 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 63 components and 0.038135 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.172 mas, bmaj=2.535 mas, bpa=4.371 degrees ! Estimated noise=0.125952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580897 Jy ! Component: 100 - total flux cleaned = 0.000855608 Jy ! Component: 150 - total flux cleaned = 0.00101024 Jy ! Component: 200 - total flux cleaned = 0.00104313 Jy ! Total flux subtracted in 200 components = 0.00104313 Jy ! Clean residual min=-0.000451 max=0.000460 Jy/beam ! Clean residual mean=0.000000 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.0391781 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.82878e-07 Jy ! Component: 100 - total flux cleaned = -4.02978e-05 Jy ! Component: 150 - total flux cleaned = -4.0071e-05 Jy ! Component: 200 - total flux cleaned = -1.65708e-05 Jy ! Total flux subtracted in 200 components = -1.65708e-05 Jy ! Clean residual min=-0.000429 max=0.000435 Jy/beam ! Clean residual mean=0.000000 rms=0.000115 Jy/beam ! Combined flux in latest and established models = 0.0391616 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 120 components and 0.0391616 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9723 mas, bmaj=1.58 mas, bpa=-1.51 degrees ! Estimated noise=0.0996949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017574 Jy ! Component: 100 - total flux cleaned = 0.000224136 Jy ! Component: 150 - total flux cleaned = 0.000269516 Jy ! Component: 200 - total flux cleaned = 0.000312224 Jy ! Total flux subtracted in 200 components = 0.000312224 Jy ! Clean residual min=-0.000439 max=0.000395 Jy/beam ! Clean residual mean=0.000000 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.0394738 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 137 components and 0.0394738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051560Jy sigma=1.198794 ! Fit after self-cal, rms=0.051560Jy sigma=1.198688 wmodel J0707+3822_X_a_map.mod ! Writing 137 model components to file: J0707+3822_X_a_map.mod wobs J0707+3822_X_a_uvs.fits ! Writing UV FITS file: J0707+3822_X_a_uvs.fits wwins J0707+3822_X_a_map.win ! wwins: Wrote 9 windows to J0707+3822_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119135 Jy ! Component: 100 - total flux cleaned = -0.000171759 Jy ! Component: 150 - total flux cleaned = -0.000179098 Jy ! Component: 200 - total flux cleaned = -0.000172 Jy ! Component: 250 - total flux cleaned = -0.000144138 Jy ! Component: 300 - total flux cleaned = -0.000123578 Jy ! Component: 350 - total flux cleaned = -0.000116794 Jy ! Component: 400 - total flux cleaned = -9.67899e-05 Jy ! Component: 450 - total flux cleaned = -9.03338e-05 Jy ! Component: 500 - total flux cleaned = -9.69045e-05 Jy ! Component: 550 - total flux cleaned = -9.68823e-05 Jy ! Component: 600 - total flux cleaned = -8.40553e-05 Jy ! Component: 650 - total flux cleaned = -7.76722e-05 Jy ! Component: 700 - total flux cleaned = -5.26318e-05 Jy ! Component: 750 - total flux cleaned = -2.18216e-05 Jy ! Component: 800 - total flux cleaned = -1.56691e-05 Jy ! Component: 850 - total flux cleaned = 2.44759e-06 Jy ! Component: 900 - total flux cleaned = 8.47412e-06 Jy ! Component: 950 - total flux cleaned = 4.43315e-05 Jy ! Component: 1000 - total flux cleaned = 5.61232e-05 Jy ! Component: 1050 - total flux cleaned = 5.60799e-05 Jy ! Component: 1100 - total flux cleaned = 7.93538e-05 Jy ! Component: 1150 - total flux cleaned = 9.08693e-05 Jy ! Component: 1200 - total flux cleaned = 0.000119624 Jy ! Component: 1250 - total flux cleaned = 0.000113935 Jy ! Component: 1300 - total flux cleaned = 0.000119652 Jy ! Component: 1350 - total flux cleaned = 0.000164774 Jy ! Component: 1400 - total flux cleaned = 0.0001592 Jy ! Component: 1450 - total flux cleaned = 0.000181472 Jy ! Component: 1500 - total flux cleaned = 0.000214597 Jy ! Component: 1550 - total flux cleaned = 0.0002256 Jy ! Component: 1600 - total flux cleaned = 0.000242022 Jy ! Component: 1650 - total flux cleaned = 0.000274656 Jy ! Component: 1700 - total flux cleaned = 0.000290866 Jy ! Component: 1750 - total flux cleaned = 0.000280067 Jy ! Component: 1800 - total flux cleaned = 0.000290747 Jy ! Component: 1850 - total flux cleaned = 0.000333333 Jy ! Component: 1900 - total flux cleaned = 0.000354501 Jy ! Component: 1950 - total flux cleaned = 0.000328132 Jy ! Component: 2000 - total flux cleaned = 0.000338628 Jy ! Component: 2050 - total flux cleaned = 0.000369935 Jy ! Component: 2100 - total flux cleaned = 0.000375108 Jy ! Component: 2150 - total flux cleaned = 0.000369938 Jy ! Component: 2200 - total flux cleaned = 0.000375077 Jy ! Component: 2250 - total flux cleaned = 0.000364854 Jy ! Component: 2300 - total flux cleaned = 0.000395398 Jy ! Component: 2350 - total flux cleaned = 0.000375095 Jy ! Component: 2400 - total flux cleaned = 0.000390238 Jy ! Component: 2450 - total flux cleaned = 0.000390251 Jy ! Component: 2500 - total flux cleaned = 0.000380258 Jy ! Component: 2550 - total flux cleaned = 0.000410048 Jy ! Component: 2600 - total flux cleaned = 0.000400165 Jy ! Component: 2650 - total flux cleaned = 0.000405088 Jy ! Component: 2700 - total flux cleaned = 0.000409978 Jy ! Component: 2750 - total flux cleaned = 0.000390473 Jy ! Component: 2800 - total flux cleaned = 0.000380754 Jy ! Component: 2850 - total flux cleaned = 0.000395327 Jy ! Component: 2900 - total flux cleaned = 0.000390459 Jy ! Component: 2950 - total flux cleaned = 0.000390462 Jy ! Component: 3000 - total flux cleaned = 0.000380933 Jy ! Component: 3050 - total flux cleaned = 0.000380906 Jy ! Component: 3100 - total flux cleaned = 0.000376187 Jy ! Component: 3150 - total flux cleaned = 0.000380905 Jy ! Component: 3200 - total flux cleaned = 0.000371472 Jy ! Component: 3250 - total flux cleaned = 0.000380841 Jy ! Component: 3300 - total flux cleaned = 0.000352843 Jy ! Component: 3350 - total flux cleaned = 0.000348211 Jy ! Component: 3400 - total flux cleaned = 0.00034359 Jy ! Component: 3450 - total flux cleaned = 0.000357404 Jy ! Component: 3500 - total flux cleaned = 0.00035742 Jy ! Component: 3550 - total flux cleaned = 0.000361999 Jy ! Component: 3600 - total flux cleaned = 0.000320998 Jy ! Component: 3650 - total flux cleaned = 0.000352746 Jy ! Component: 3700 - total flux cleaned = 0.000357282 Jy ! Component: 3750 - total flux cleaned = 0.000348253 Jy ! Component: 3800 - total flux cleaned = 0.000348263 Jy ! Component: 3850 - total flux cleaned = 0.000343765 Jy ! Component: 3900 - total flux cleaned = 0.000357135 Jy ! Component: 3950 - total flux cleaned = 0.000317125 Jy ! Component: 4000 - total flux cleaned = 0.000308258 Jy ! Component: 4050 - total flux cleaned = 0.000317067 Jy ! Total flux subtracted in 4096 components = 0.000325893 Jy ! Clean residual min=-0.000254 max=0.000257 Jy/beam ! Clean residual mean=0.000000 rms=0.000076 Jy/beam ! Combined flux in latest and established models = 0.0397997 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 476 components and 0.0397997 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0707+3822_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9723 x 1.58 at -1.51 degrees (North through East) ! Clean map min=-0.00035469 max=0.030056 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0707+3822_X_a_map.fits wmodel /vlbi/uf001/uvm//J0707+3822_X_a_map.mod ! Writing 476 model components to file: /vlbi/uf001/uvm//J0707+3822_X_a_map.mod wobs /vlbi/uf001/uvm//J0707+3822_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0707+3822_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0707+3822_X_a_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uvm//J0707+3822_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0300561 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 7.59015e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.757598 0.757598 1.5152 3.03039 6.06079 12.1216 24.2431 48.4863 96.9726 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.03 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 395.988 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0707+3822_X_a_dfm.log closed on Sun Jan 13 20:59:34 2019