! Started logfile: /vlbi/uf001/uvm//J0706-4122_S_a_dfm.log on Sun Jan 13 20:59:05 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J0706-4122_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0706-4122_S_a_uvm.fits ! AN table 1: 73 integrations on 15 of 15 possible baselines. ! AN table 2: 74 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.877843 visibilities/baseline/integration-bin. ! Found source: J0706-4122 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4053 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0706-4122_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.016158Jy sigma=13.471488 ! Fit after self-cal, rms=0.881265Jy sigma=11.563896 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.12 mas, bmaj=64.56 mas, bpa=3.612 degrees ! Estimated noise=1.5299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.09669 Jy ! Component: 100 - total flux cleaned = 0.128563 Jy ! Total flux subtracted in 100 components = 0.128563 Jy ! Clean residual min=-0.011232 max=0.015088 Jy/beam ! Clean residual mean=-0.000142 rms=0.004166 Jy/beam ! Combined flux in latest and established models = 0.128563 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.128563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091005Jy sigma=1.162143 ! Fit after self-cal, rms=0.090620Jy sigma=1.156757 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.47 mas, bmaj=60.77 mas, bpa=-0.6506 degrees ! Estimated noise=0.861417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185793 Jy ! Component: 100 - total flux cleaned = 0.0288704 Jy ! Component: 150 - total flux cleaned = 0.0352205 Jy ! Component: 200 - total flux cleaned = 0.0396721 Jy ! Total flux subtracted in 200 components = 0.0396721 Jy ! Clean residual min=-0.004232 max=0.004251 Jy/beam ! Clean residual mean=-0.000065 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.168235 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 110 components and 0.168235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086869Jy sigma=1.101775 ! Fit after self-cal, rms=0.086626Jy sigma=1.097955 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.47 x 60.77 at -0.6506 degrees (North through East) ! Clean map min=-0.004261 max=0.12719 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 KP 1.03 LA 0.98 NL 1.28 ! OV 1.02 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! KP 1.05 LA 0.87 OV 1.07 PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 KP 0.95 LA 1.03 NL 1.27 ! OV 1.03 PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! KP 1.01 LA 0.91 OV 0.94 PT 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 0.97 LA 0.95 NL 1.25 ! OV 0.97 PT 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! KP 0.99 LA 0.91 OV 1.04 PT 1.04 ! ! ! Fit before self-cal, rms=0.086626Jy sigma=1.097955 ! Fit after self-cal, rms=0.089081Jy sigma=1.089852 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.87 mas, bmaj=60.3 mas, bpa=-1.101 degrees ! Estimated noise=0.851685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373448 Jy ! Component: 100 - total flux cleaned = 0.00510903 Jy ! Component: 150 - total flux cleaned = 0.00548701 Jy ! Component: 200 - total flux cleaned = 0.00576764 Jy ! Total flux subtracted in 200 components = 0.00576764 Jy ! Clean residual min=-0.002617 max=0.002239 Jy/beam ! Clean residual mean=-0.000010 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.174002 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 167 components and 0.174003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088914Jy sigma=1.087626 ! Fit after self-cal, rms=0.088988Jy sigma=1.086892 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088988Jy sigma=1.086892 ! Fit after self-cal, rms=0.089362Jy sigma=1.085995 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.88 mas, bmaj=60.05 mas, bpa=-1.143 degrees ! Estimated noise=0.851774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137287 Jy ! Component: 100 - total flux cleaned = 0.00160735 Jy ! Component: 150 - total flux cleaned = 0.00179573 Jy ! Component: 200 - total flux cleaned = 0.00197719 Jy ! Total flux subtracted in 200 components = 0.00197719 Jy ! Clean residual min=-0.002335 max=0.002049 Jy/beam ! Clean residual mean=-0.000015 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.17598 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 209 components and 0.17598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089315Jy sigma=1.085450 ! Fit after self-cal, rms=0.089319Jy sigma=1.085271 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253067 Jy ! Component: 100 - total flux cleaned = 0.000357154 Jy ! Component: 150 - total flux cleaned = 0.000356765 Jy ! Component: 200 - total flux cleaned = 0.000375008 Jy ! Total flux subtracted in 200 components = 0.000375008 Jy ! Clean residual min=-0.002153 max=0.001946 Jy/beam ! Clean residual mean=-0.000014 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.176355 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 235 components and 0.176355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089297Jy sigma=1.085068 ! Fit after self-cal, rms=0.089290Jy sigma=1.085002 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089290Jy sigma=1.085002 ! Fit after self-cal, rms=0.089537Jy sigma=1.084581 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.87 mas, bmaj=59.96 mas, bpa=-1.08 degrees ! Estimated noise=0.851697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026598 Jy ! Component: 100 - total flux cleaned = 0.000570865 Jy ! Component: 150 - total flux cleaned = 0.000670835 Jy ! Component: 200 - total flux cleaned = 0.000706605 Jy ! Total flux subtracted in 200 components = 0.000706605 Jy ! Clean residual min=-0.001986 max=0.001777 Jy/beam ! Clean residual mean=-0.000018 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.177061 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 269 components and 0.177061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089518Jy sigma=1.084435 ! Fit after self-cal, rms=0.089530Jy sigma=1.084382 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.56393e-05 Jy ! Component: 100 - total flux cleaned = 8.79154e-05 Jy ! Component: 150 - total flux cleaned = 0.000118491 Jy ! Component: 200 - total flux cleaned = 0.00013285 Jy ! Total flux subtracted in 200 components = 0.00013285 Jy ! Clean residual min=-0.001901 max=0.001763 Jy/beam ! Clean residual mean=-0.000017 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.177194 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 280 components and 0.177194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089520Jy sigma=1.084316 ! Fit after self-cal, rms=0.089520Jy sigma=1.084297 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089520Jy sigma=1.084297 ! Fit after self-cal, rms=0.089589Jy sigma=1.084248 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.86 mas, bmaj=61.27 mas, bpa=-2.051 degrees ! Estimated noise=0.84828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145897 Jy ! Component: 100 - total flux cleaned = 0.000309606 Jy ! Component: 150 - total flux cleaned = 0.000417164 Jy ! Component: 200 - total flux cleaned = 0.000479936 Jy ! Total flux subtracted in 200 components = 0.000479936 Jy ! Clean residual min=-0.001732 max=0.001609 Jy/beam ! Clean residual mean=-0.000019 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.177674 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 301 components and 0.177674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089579Jy sigma=1.084183 ! Fit after self-cal, rms=0.089581Jy sigma=1.084107 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15997e-05 Jy ! Component: 100 - total flux cleaned = 4.80423e-05 Jy ! Component: 150 - total flux cleaned = 0.000105413 Jy ! Component: 200 - total flux cleaned = 0.000138269 Jy ! Total flux subtracted in 200 components = 0.000138269 Jy ! Clean residual min=-0.001725 max=0.001610 Jy/beam ! Clean residual mean=-0.000018 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.177812 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 316 components and 0.177812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089575Jy sigma=1.084067 ! Fit after self-cal, rms=0.089577Jy sigma=1.084058 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=12.85 mas, bmaj=59.91 mas, bpa=-1.02 degrees ! Estimated noise=0.851815 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.85 x 59.91 at -1.02 degrees (North through East) ! Clean map min=-0.001804 max=0.1252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.48 mas, bmaj=63.15 mas, bpa=3.796 degrees ! Estimated noise=1.5122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0937842 Jy ! Component: 100 - total flux cleaned = 0.12548 Jy ! Component: 150 - total flux cleaned = 0.143009 Jy ! Component: 200 - total flux cleaned = 0.153804 Jy ! Total flux subtracted in 200 components = 0.153804 Jy ! Clean residual min=-0.006001 max=0.006312 Jy/beam ! Clean residual mean=-0.000085 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.153804 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 96 model components to the UV plane model. ! The established model now contains 96 components and 0.153804 Jy ! Inverting map and beam ! Estimated beam: bmin=12.85 mas, bmaj=59.91 mas, bpa=-1.02 degrees ! Estimated noise=0.851815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00928289 Jy ! Component: 100 - total flux cleaned = 0.0144117 Jy ! Component: 150 - total flux cleaned = 0.0176752 Jy ! Component: 200 - total flux cleaned = 0.0198266 Jy ! Total flux subtracted in 200 components = 0.0198266 Jy ! Clean residual min=-0.002215 max=0.002846 Jy/beam ! Clean residual mean=-0.000041 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.173631 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 145 components and 0.173631 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.86 mas, bmaj=61.27 mas, bpa=-2.051 degrees ! Estimated noise=0.84828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141457 Jy ! Component: 100 - total flux cleaned = 0.0019991 Jy ! Component: 150 - total flux cleaned = 0.00224949 Jy ! Component: 200 - total flux cleaned = 0.00238894 Jy ! Total flux subtracted in 200 components = 0.00238894 Jy ! Clean residual min=-0.001943 max=0.002034 Jy/beam ! Clean residual mean=-0.000029 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.17602 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.65068e-05 Jy ! Component: 100 - total flux cleaned = 7.71391e-05 Jy ! Component: 150 - total flux cleaned = 0.000148372 Jy ! Component: 200 - total flux cleaned = 0.000216768 Jy ! Total flux subtracted in 200 components = 0.000216768 Jy ! Clean residual min=-0.001900 max=0.001848 Jy/beam ! Clean residual mean=-0.000028 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.176236 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 226 components and 0.176236 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=12.85 mas, bmaj=59.91 mas, bpa=-1.02 degrees ! Estimated noise=0.851815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95503e-05 Jy ! Component: 100 - total flux cleaned = 0.000100195 Jy ! Component: 150 - total flux cleaned = 0.000177292 Jy ! Component: 200 - total flux cleaned = 0.000226829 Jy ! Total flux subtracted in 200 components = 0.000226829 Jy ! Clean residual min=-0.001972 max=0.001746 Jy/beam ! Clean residual mean=-0.000025 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.176463 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 265 components and 0.176463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089612Jy sigma=1.084432 ! Fit after self-cal, rms=0.089590Jy sigma=1.084255 wmodel J0706-4122_S_a_map.mod ! Writing 265 model components to file: J0706-4122_S_a_map.mod wobs J0706-4122_S_a_uvs.fits ! Writing UV FITS file: J0706-4122_S_a_uvs.fits wwins J0706-4122_S_a_map.win ! wwins: Wrote 1 windows to J0706-4122_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000400156 Jy ! Component: 100 - total flux cleaned = -0.000566595 Jy ! Component: 150 - total flux cleaned = -0.000698342 Jy ! Component: 200 - total flux cleaned = -0.000846477 Jy ! Component: 250 - total flux cleaned = -0.000985855 Jy ! Component: 300 - total flux cleaned = -0.00114135 Jy ! Component: 350 - total flux cleaned = -0.00135304 Jy ! Component: 400 - total flux cleaned = -0.00157672 Jy ! Component: 450 - total flux cleaned = -0.00181102 Jy ! Component: 500 - total flux cleaned = -0.00201811 Jy ! Component: 550 - total flux cleaned = -0.00223744 Jy ! Component: 600 - total flux cleaned = -0.00241442 Jy ! Component: 650 - total flux cleaned = -0.00255266 Jy ! Component: 700 - total flux cleaned = -0.0027213 Jy ! Component: 750 - total flux cleaned = -0.00282016 Jy ! Component: 800 - total flux cleaned = -0.00293311 Jy ! Component: 850 - total flux cleaned = -0.00305942 Jy ! Component: 900 - total flux cleaned = -0.00316792 Jy ! Component: 950 - total flux cleaned = -0.0032895 Jy ! Component: 1000 - total flux cleaned = -0.0034089 Jy ! Component: 1050 - total flux cleaned = -0.00348235 Jy ! Component: 1100 - total flux cleaned = -0.00359843 Jy ! Component: 1150 - total flux cleaned = -0.00369846 Jy ! Component: 1200 - total flux cleaned = -0.00381136 Jy ! Component: 1250 - total flux cleaned = -0.00392247 Jy ! Component: 1300 - total flux cleaned = -0.00405949 Jy ! Component: 1350 - total flux cleaned = -0.00415433 Jy ! Component: 1400 - total flux cleaned = -0.00427481 Jy ! Component: 1450 - total flux cleaned = -0.00435428 Jy ! Component: 1500 - total flux cleaned = -0.00441998 Jy ! Component: 1550 - total flux cleaned = -0.00445907 Jy ! Component: 1600 - total flux cleaned = -0.00449789 Jy ! Component: 1650 - total flux cleaned = -0.00454934 Jy ! Component: 1700 - total flux cleaned = -0.00457476 Jy ! Component: 1750 - total flux cleaned = -0.00458733 Jy ! Component: 1800 - total flux cleaned = -0.00461249 Jy ! Component: 1850 - total flux cleaned = -0.0046501 Jy ! Component: 1900 - total flux cleaned = -0.00468743 Jy ! Component: 1950 - total flux cleaned = -0.00469987 Jy ! Component: 2000 - total flux cleaned = -0.00471222 Jy ! Component: 2050 - total flux cleaned = -0.00472457 Jy ! Component: 2100 - total flux cleaned = -0.00476146 Jy ! Component: 2150 - total flux cleaned = -0.00474913 Jy ! Component: 2200 - total flux cleaned = -0.00472463 Jy ! Component: 2250 - total flux cleaned = -0.00472461 Jy ! Component: 2300 - total flux cleaned = -0.00473675 Jy ! Component: 2350 - total flux cleaned = -0.00476104 Jy ! Component: 2400 - total flux cleaned = -0.00476099 Jy ! Component: 2450 - total flux cleaned = -0.00480956 Jy ! Component: 2500 - total flux cleaned = -0.00480958 Jy ! Component: 2550 - total flux cleaned = -0.00488231 Jy ! Component: 2600 - total flux cleaned = -0.00490656 Jy ! Component: 2650 - total flux cleaned = -0.00494303 Jy ! Component: 2700 - total flux cleaned = -0.00495524 Jy ! Component: 2750 - total flux cleaned = -0.00499175 Jy ! Component: 2800 - total flux cleaned = -0.00504059 Jy ! Component: 2850 - total flux cleaned = -0.00506499 Jy ! Component: 2900 - total flux cleaned = -0.00510169 Jy ! Component: 2950 - total flux cleaned = -0.00513844 Jy ! Component: 3000 - total flux cleaned = -0.00517541 Jy ! Component: 3050 - total flux cleaned = -0.00521247 Jy ! Component: 3100 - total flux cleaned = -0.00523725 Jy ! Component: 3150 - total flux cleaned = -0.00529945 Jy ! Component: 3200 - total flux cleaned = -0.00532442 Jy ! Component: 3250 - total flux cleaned = -0.00536198 Jy ! Component: 3300 - total flux cleaned = -0.00541217 Jy ! Component: 3350 - total flux cleaned = -0.00543737 Jy ! Component: 3400 - total flux cleaned = -0.00547547 Jy ! Component: 3450 - total flux cleaned = -0.0055136 Jy ! Component: 3500 - total flux cleaned = -0.00553914 Jy ! Component: 3550 - total flux cleaned = -0.00559047 Jy ! Component: 3600 - total flux cleaned = -0.00561639 Jy ! Component: 3650 - total flux cleaned = -0.00566815 Jy ! Component: 3700 - total flux cleaned = -0.00570719 Jy ! Component: 3750 - total flux cleaned = -0.00577259 Jy ! Component: 3800 - total flux cleaned = -0.00579897 Jy ! Component: 3850 - total flux cleaned = -0.00585191 Jy ! Component: 3900 - total flux cleaned = -0.00589171 Jy ! Component: 3950 - total flux cleaned = -0.00595857 Jy ! Component: 4000 - total flux cleaned = -0.00597204 Jy ! Component: 4050 - total flux cleaned = -0.00603954 Jy ! Total flux subtracted in 4096 components = -0.00609388 Jy ! Clean residual min=-0.000737 max=0.000769 Jy/beam ! Clean residual mean=0.000007 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.170369 Jy keep ! Adding 541 model components to the UV plane model. ! The established model now contains 806 components and 0.170369 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0706-4122_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.85 x 59.91 at -1.02 degrees (North through East) ! Clean map min=-0.0027001 max=0.12362 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0706-4122_S_a_map.fits wmodel /vlbi/uf001/uvm//J0706-4122_S_a_map.mod ! Writing 806 model components to file: /vlbi/uf001/uvm//J0706-4122_S_a_map.mod wobs /vlbi/uf001/uvm//J0706-4122_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0706-4122_S_a_uvs.fits wwins /vlbi/uf001/uvm//J0706-4122_S_a_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J0706-4122_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.123618 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000321961 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.781343 0.781343 1.56269 3.12537 6.25075 12.5015 25.003 50.006 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.123 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 383.954 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0706-4122_S_a_dfm.log closed on Sun Jan 13 20:59:11 2019