! Started logfile: /vlbi/uf001/uva//J0706-2311_S_b_dfm.log on Sun Jan 13 23:18:39 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0706-2311_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0706-2311_S_b_uva.fits ! AN table 1: 220 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.635227 visibilities/baseline/integration-bin. ! Found source: J0706-2311 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 11739 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0706-2311_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 384 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 384 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 384 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008312Jy sigma=13.609315 ! Fit after self-cal, rms=0.923078Jy sigma=12.452053 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=12.3 mas, bpa=-25.61 degrees ! Estimated noise=1.16753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552888 Jy ! Component: 100 - total flux cleaned = 0.0818555 Jy ! Total flux subtracted in 100 components = 0.0818555 Jy ! Clean residual min=-0.017567 max=0.021416 Jy/beam ! Clean residual mean=-0.000438 rms=0.007395 Jy/beam ! Combined flux in latest and established models = 0.0818555 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.0818555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.180417Jy sigma=2.277872 ! Fit after self-cal, rms=0.179430Jy sigma=2.264745 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=13.05 mas, bpa=-24.22 degrees ! Estimated noise=0.502428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0477532 Jy ! Component: 100 - total flux cleaned = 0.0819851 Jy ! Component: 150 - total flux cleaned = 0.107703 Jy ! Component: 200 - total flux cleaned = 0.127129 Jy ! Total flux subtracted in 200 components = 0.127129 Jy ! Clean residual min=-0.022551 max=0.042369 Jy/beam ! Clean residual mean=-0.000788 rms=0.012942 Jy/beam ! Combined flux in latest and established models = 0.208985 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 90 components and 0.208985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.160729Jy sigma=2.041106 ! Fit after self-cal, rms=0.159565Jy sigma=2.023860 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.529 x 13.05 at -24.22 degrees (North through East) ! Clean map min=-0.024054 max=0.073543 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.31 HN 0.66 KP 1.11 LA 0.56 ! MK 1.35 NL 4.00 OV 3.31 PT 0.52 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 HN 0.67 KP 1.13 LA 0.54 ! MK 1.25 NL 3.61 OV 2.90 PT 0.56 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.91 HN 0.54 KP 1.36 LA 0.56 ! MK 1.53 NL 3.41 OV 3.19 PT 0.48 ! ! ! Fit before self-cal, rms=0.159565Jy sigma=2.023860 ! Fit after self-cal, rms=0.399245Jy sigma=1.529201 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.518 mas, bmaj=14.64 mas, bpa=-21.96 degrees ! Estimated noise=0.639965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00737953 Jy ! Component: 100 - total flux cleaned = 0.00738722 Jy ! Component: 150 - total flux cleaned = 0.00739443 Jy ! Component: 200 - total flux cleaned = 0.00694548 Jy ! Total flux subtracted in 200 components = 0.00694548 Jy ! Clean residual min=-0.031175 max=0.035762 Jy/beam ! Clean residual mean=-0.000357 rms=0.008460 Jy/beam ! Combined flux in latest and established models = 0.21593 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.21593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.395627Jy sigma=1.540907 ! Fit after self-cal, rms=0.409093Jy sigma=1.488645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.409093Jy sigma=1.488645 ! Fit after self-cal, rms=0.573952Jy sigma=1.264686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=13.91 mas, bpa=-22.06 degrees ! Estimated noise=0.656996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143581 Jy ! Component: 100 - total flux cleaned = 0.00199971 Jy ! Component: 150 - total flux cleaned = 0.00199505 Jy ! Component: 200 - total flux cleaned = 0.00199305 Jy ! Total flux subtracted in 200 components = 0.00199305 Jy ! Clean residual min=-0.012496 max=0.018215 Jy/beam ! Clean residual mean=-0.000041 rms=0.004373 Jy/beam ! Combined flux in latest and established models = 0.217924 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.217924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.573747Jy sigma=1.264609 ! Fit after self-cal, rms=0.574015Jy sigma=1.260400 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.5, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145123 Jy ! Component: 100 - total flux cleaned = 0.0137852 Jy ! Component: 150 - total flux cleaned = 0.0123389 Jy ! Component: 200 - total flux cleaned = 0.0110646 Jy ! Total flux subtracted in 200 components = 0.0110646 Jy ! Clean residual min=-0.010402 max=0.015459 Jy/beam ! Clean residual mean=0.000028 rms=0.003979 Jy/beam ! Combined flux in latest and established models = 0.228988 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 156 components and 0.228988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.573361Jy sigma=1.243677 ! Fit after self-cal, rms=0.570873Jy sigma=1.233952 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.570873Jy sigma=1.233952 ! Fit after self-cal, rms=0.613446Jy sigma=1.230830 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.71 mas, bmaj=13.58 mas, bpa=-21.39 degrees ! Estimated noise=0.665367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143106 Jy ! Component: 100 - total flux cleaned = 0.0163544 Jy ! Component: 150 - total flux cleaned = 0.0163429 Jy ! Component: 200 - total flux cleaned = 0.0163423 Jy ! Total flux subtracted in 200 components = 0.0163423 Jy ! Clean residual min=-0.010418 max=0.015253 Jy/beam ! Clean residual mean=0.000056 rms=0.004032 Jy/beam ! Combined flux in latest and established models = 0.24533 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 181 components and 0.24533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.612064Jy sigma=1.225031 ! Fit after self-cal, rms=0.610325Jy sigma=1.217477 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807211 Jy ! Component: 100 - total flux cleaned = 0.00808262 Jy ! Component: 150 - total flux cleaned = 0.00809527 Jy ! Component: 200 - total flux cleaned = 0.00830976 Jy ! Total flux subtracted in 200 components = 0.00830976 Jy ! Clean residual min=-0.011073 max=0.015852 Jy/beam ! Clean residual mean=0.000102 rms=0.004057 Jy/beam ! Combined flux in latest and established models = 0.25364 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 199 components and 0.25364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.609362Jy sigma=1.218656 ! Fit after self-cal, rms=0.607884Jy sigma=1.216241 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.607884Jy sigma=1.216241 ! Fit after self-cal, rms=0.604306Jy sigma=1.196830 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.993 mas, bmaj=21.62 mas, bpa=-1.805 degrees ! Estimated noise=0.720339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108267 Jy ! Component: 100 - total flux cleaned = 0.0128125 Jy ! Component: 150 - total flux cleaned = 0.0138436 Jy ! Component: 200 - total flux cleaned = 0.0142263 Jy ! Total flux subtracted in 200 components = 0.0142263 Jy ! Clean residual min=-0.013174 max=0.015645 Jy/beam ! Clean residual mean=0.000053 rms=0.004716 Jy/beam ! Combined flux in latest and established models = 0.267866 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 225 components and 0.267866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.603758Jy sigma=1.195863 ! Fit after self-cal, rms=0.601587Jy sigma=1.190916 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608789 Jy ! Component: 100 - total flux cleaned = 0.00714524 Jy ! Component: 150 - total flux cleaned = 0.00732908 Jy ! Component: 200 - total flux cleaned = 0.00749069 Jy ! Total flux subtracted in 200 components = 0.00749069 Jy ! Clean residual min=-0.014437 max=0.015217 Jy/beam ! Clean residual mean=0.000107 rms=0.004828 Jy/beam ! Combined flux in latest and established models = 0.275357 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 237 components and 0.275357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.601107Jy sigma=1.193313 ! Fit after self-cal, rms=0.600287Jy sigma=1.191095 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=13.71 mas, bpa=-21.06 degrees ! Estimated noise=0.692299 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.927 x 13.71 at -21.06 degrees (North through East) ! Clean map min=-0.014891 max=0.09784 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=12.57 mas, bpa=-22.63 degrees ! Estimated noise=1.69809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785021 Jy ! Component: 100 - total flux cleaned = 0.125281 Jy ! Component: 150 - total flux cleaned = 0.159402 Jy ! Component: 200 - total flux cleaned = 0.185281 Jy ! Total flux subtracted in 200 components = 0.185281 Jy ! Clean residual min=-0.014837 max=0.020893 Jy/beam ! Clean residual mean=-0.000153 rms=0.005390 Jy/beam ! Combined flux in latest and established models = 0.185281 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.185281 Jy ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=13.71 mas, bpa=-21.06 degrees ! Estimated noise=0.692299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322739 Jy ! Component: 100 - total flux cleaned = 0.0535107 Jy ! Component: 150 - total flux cleaned = 0.065599 Jy ! Component: 200 - total flux cleaned = 0.0715769 Jy ! Total flux subtracted in 200 components = 0.0715769 Jy ! Clean residual min=-0.012363 max=0.016970 Jy/beam ! Clean residual mean=-0.000001 rms=0.004422 Jy/beam ! Combined flux in latest and established models = 0.256858 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 98 components and 0.256858 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.993 mas, bmaj=21.62 mas, bpa=-1.805 degrees ! Estimated noise=0.720339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101022 Jy ! Component: 100 - total flux cleaned = 0.0121925 Jy ! Component: 150 - total flux cleaned = 0.013609 Jy ! Component: 200 - total flux cleaned = 0.0139194 Jy ! Total flux subtracted in 200 components = 0.0139194 Jy ! Clean residual min=-0.015756 max=0.017086 Jy/beam ! Clean residual mean=0.000079 rms=0.005220 Jy/beam ! Combined flux in latest and established models = 0.270777 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576768 Jy ! Component: 100 - total flux cleaned = 0.000577146 Jy ! Component: 150 - total flux cleaned = 0.00106722 Jy ! Component: 200 - total flux cleaned = 0.0010648 Jy ! Total flux subtracted in 200 components = 0.0010648 Jy ! Clean residual min=-0.015610 max=0.015273 Jy/beam ! Clean residual mean=0.000082 rms=0.004934 Jy/beam ! Combined flux in latest and established models = 0.271842 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 128 components and 0.271842 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=13.71 mas, bpa=-21.06 degrees ! Estimated noise=0.692299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106749 Jy ! Component: 100 - total flux cleaned = 0.000818706 Jy ! Component: 150 - total flux cleaned = 0.000585555 Jy ! Component: 200 - total flux cleaned = 0.000179365 Jy ! Total flux subtracted in 200 components = 0.000179365 Jy ! Clean residual min=-0.011815 max=0.012251 Jy/beam ! Clean residual mean=0.000051 rms=0.003559 Jy/beam ! Combined flux in latest and established models = 0.272022 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 148 components and 0.272022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.599706Jy sigma=1.196357 ! Fit after self-cal, rms=0.598939Jy sigma=1.191175 wmodel J0706-2311_S_b_map.mod ! Writing 148 model components to file: J0706-2311_S_b_map.mod wobs J0706-2311_S_b_uvs.fits ! Writing UV FITS file: J0706-2311_S_b_uvs.fits wwins J0706-2311_S_b_map.win ! wwins: Wrote 2 windows to J0706-2311_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540543 Jy ! Component: 100 - total flux cleaned = 0.0101777 Jy ! Component: 150 - total flux cleaned = 0.0138891 Jy ! Component: 200 - total flux cleaned = 0.016226 Jy ! Component: 250 - total flux cleaned = 0.0179643 Jy ! Component: 300 - total flux cleaned = 0.0193254 Jy ! Component: 350 - total flux cleaned = 0.0201973 Jy ! Component: 400 - total flux cleaned = 0.0211778 Jy ! Component: 450 - total flux cleaned = 0.0221253 Jy ! Component: 500 - total flux cleaned = 0.0230402 Jy ! Component: 550 - total flux cleaned = 0.0236741 Jy ! Component: 600 - total flux cleaned = 0.0240438 Jy ! Component: 650 - total flux cleaned = 0.0239259 Jy ! Component: 700 - total flux cleaned = 0.024513 Jy ! Component: 750 - total flux cleaned = 0.0246284 Jy ! Component: 800 - total flux cleaned = 0.0251939 Jy ! Component: 850 - total flux cleaned = 0.0255245 Jy ! Component: 900 - total flux cleaned = 0.0257417 Jy ! Component: 950 - total flux cleaned = 0.0260611 Jy ! Component: 1000 - total flux cleaned = 0.0263778 Jy ! Component: 1050 - total flux cleaned = 0.0267922 Jy ! Component: 1100 - total flux cleaned = 0.0269955 Jy ! Component: 1150 - total flux cleaned = 0.0273987 Jy ! Component: 1200 - total flux cleaned = 0.0276946 Jy ! Component: 1250 - total flux cleaned = 0.0279868 Jy ! Component: 1300 - total flux cleaned = 0.0282747 Jy ! Component: 1350 - total flux cleaned = 0.0282745 Jy ! Component: 1400 - total flux cleaned = 0.0285571 Jy ! Component: 1450 - total flux cleaned = 0.0288354 Jy ! Component: 1500 - total flux cleaned = 0.0292941 Jy ! Component: 1550 - total flux cleaned = 0.0298384 Jy ! Component: 1600 - total flux cleaned = 0.0301985 Jy ! Component: 1650 - total flux cleaned = 0.0306442 Jy ! Component: 1700 - total flux cleaned = 0.0310854 Jy ! Component: 1750 - total flux cleaned = 0.0315227 Jy ! Component: 1800 - total flux cleaned = 0.0319563 Jy ! Component: 1850 - total flux cleaned = 0.0323004 Jy ! Component: 1900 - total flux cleaned = 0.032643 Jy ! Component: 1950 - total flux cleaned = 0.0328136 Jy ! Component: 2000 - total flux cleaned = 0.0331537 Jy ! Component: 2050 - total flux cleaned = 0.0335767 Jy ! Component: 2100 - total flux cleaned = 0.033745 Jy ! Component: 2150 - total flux cleaned = 0.0340823 Jy ! Component: 2200 - total flux cleaned = 0.0343343 Jy ! Component: 2250 - total flux cleaned = 0.0347551 Jy ! Component: 2300 - total flux cleaned = 0.0350069 Jy ! Component: 2350 - total flux cleaned = 0.0353425 Jy ! Component: 2400 - total flux cleaned = 0.0356785 Jy ! Component: 2450 - total flux cleaned = 0.0360148 Jy ! Component: 2500 - total flux cleaned = 0.0364352 Jy ! Component: 2550 - total flux cleaned = 0.0366872 Jy ! Component: 2600 - total flux cleaned = 0.0371934 Jy ! Component: 2650 - total flux cleaned = 0.0377014 Jy ! Component: 2700 - total flux cleaned = 0.0382102 Jy ! Component: 2750 - total flux cleaned = 0.0387201 Jy ! Component: 2800 - total flux cleaned = 0.0394037 Jy ! Component: 2850 - total flux cleaned = 0.039832 Jy ! Component: 2900 - total flux cleaned = 0.0403483 Jy ! Component: 2950 - total flux cleaned = 0.0410402 Jy ! Component: 3000 - total flux cleaned = 0.0416489 Jy ! Component: 3050 - total flux cleaned = 0.0419983 Jy ! Component: 3100 - total flux cleaned = 0.0426141 Jy ! Component: 3150 - total flux cleaned = 0.0430573 Jy ! Component: 3200 - total flux cleaned = 0.0433248 Jy ! Component: 3250 - total flux cleaned = 0.0437737 Jy ! Component: 3300 - total flux cleaned = 0.0441364 Jy ! Component: 3350 - total flux cleaned = 0.0445004 Jy ! Component: 3400 - total flux cleaned = 0.0447774 Jy ! Component: 3450 - total flux cleaned = 0.0451485 Jy ! Component: 3500 - total flux cleaned = 0.0453369 Jy ! Component: 3550 - total flux cleaned = 0.0456202 Jy ! Component: 3600 - total flux cleaned = 0.0460011 Jy ! Component: 3650 - total flux cleaned = 0.0461946 Jy ! Component: 3700 - total flux cleaned = 0.0462919 Jy ! Component: 3750 - total flux cleaned = 0.0466839 Jy ! Component: 3800 - total flux cleaned = 0.046982 Jy ! Component: 3850 - total flux cleaned = 0.0469823 Jy ! Component: 3900 - total flux cleaned = 0.0473873 Jy ! Component: 3950 - total flux cleaned = 0.0476939 Jy ! Component: 4000 - total flux cleaned = 0.0477965 Jy ! Component: 4050 - total flux cleaned = 0.0481105 Jy ! Total flux subtracted in 4096 components = 0.0483207 Jy ! Clean residual min=-0.005994 max=0.005525 Jy/beam ! Clean residual mean=0.000167 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 0.320342 Jy keep ! Adding 441 model components to the UV plane model. ! The established model now contains 589 components and 0.320343 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0706-2311_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.927 x 13.71 at -21.06 degrees (North through East) ! Clean map min=-0.017419 max=0.10426 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0706-2311_S_b_map.fits wmodel /vlbi/uf001/uva//J0706-2311_S_b_map.mod ! Writing 589 model components to file: /vlbi/uf001/uva//J0706-2311_S_b_map.mod wobs /vlbi/uf001/uva//J0706-2311_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0706-2311_S_b_uvs.fits wwins /vlbi/uf001/uva//J0706-2311_S_b_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0706-2311_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.104261 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00220673 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.34962 6.34962 12.6992 25.3985 50.797 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0066 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.104 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 47.246 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0706-2311_S_b_dfm.log closed on Sun Jan 13 23:18:44 2019