! Started logfile: /vlbi/uf001/uva//J0706-2311_S_a_dfm.log on Sun Jan 13 23:18:34 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0706-2311_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0706-2311_S_a_uva.fits
! AN table 1: 73 integrations on 21 of 21 possible baselines.
! AN table 2: 36 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.992352 visibilities/baseline/integration-bin.
! Found source: J0706-2311
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4671 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0706-2311_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 80 telescope corrections were flagged in sub-array 1.
!  A total of 72 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 80 telescope corrections were flagged in sub-array 1.
!  A total of 72 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 80 telescope corrections were flagged in sub-array 1.
!  A total of 72 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.009623Jy  sigma=15.987541
! Fit after  self-cal, rms=0.924665Jy  sigma=14.570654
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.998 mas, bmaj=18.78 mas, bpa=1.381 degrees
! Estimated noise=1.55149 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0587707 Jy
! Component: 100  -  total flux cleaned = 0.0802139 Jy
! Total flux subtracted in 100 components = 0.0802139 Jy
! Clean residual min=-0.011922 max=0.014299 Jy/beam
! Clean residual mean=0.000067 rms=0.004622 Jy/beam
! Combined flux in latest and established models = 0.0802139 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.0802139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093880Jy  sigma=1.418590
! Fit after  self-cal, rms=0.092656Jy  sigma=1.401377
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.203 mas, bmaj=20.49 mas, bpa=4.703 degrees
! Estimated noise=0.802123 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184724 Jy
! Component: 100  -  total flux cleaned = 0.0307653 Jy
! Component: 150  -  total flux cleaned = 0.040092 Jy
! Component: 200  -  total flux cleaned = 0.0473428 Jy
! Total flux subtracted in 200 components = 0.0473428 Jy
! Clean residual min=-0.011913 max=0.018077 Jy/beam
! Clean residual mean=0.000064 rms=0.004942 Jy/beam
! Combined flux in latest and established models = 0.127557 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 126 components and 0.127557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087696Jy  sigma=1.327610
! Fit after  self-cal, rms=0.087229Jy  sigma=1.320354
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.203 x 20.49 at 4.703 degrees (North through East)
! Clean map  min=-0.011594  max=0.081117 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.02     KP        0.99     LA        0.85     
!   NL        1.21     OV        1.11     PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.92     KP        0.83     LA        0.89     
!   NL        1.23     OV        1.07     PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     KP        0.76     LA        0.88     
!   NL        1.51     OV        1.12     PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.087229Jy  sigma=1.320354
! Fit after  self-cal, rms=0.087768Jy  sigma=1.294726
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.766 mas, bmaj=20.89 mas, bpa=6.758 degrees
! Estimated noise=0.806947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340242 Jy
! Component: 100  -  total flux cleaned = 0.00469146 Jy
! Component: 150  -  total flux cleaned = 0.00518816 Jy
! Component: 200  -  total flux cleaned = 0.00540035 Jy
! Total flux subtracted in 200 components = 0.00540035 Jy
! Clean residual min=-0.013942 max=0.015299 Jy/beam
! Clean residual mean=0.000035 rms=0.004559 Jy/beam
! Combined flux in latest and established models = 0.132957 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 145 components and 0.132957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087530Jy  sigma=1.289548
! Fit after  self-cal, rms=0.087844Jy  sigma=1.286168
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087844Jy  sigma=1.286168
! Fit after  self-cal, rms=0.100352Jy  sigma=1.231013
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.816 mas, bmaj=20.57 mas, bpa=6.296 degrees
! Estimated noise=0.826031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166855 Jy
! Component: 100  -  total flux cleaned = 0.00201232 Jy
! Component: 150  -  total flux cleaned = 0.00201225 Jy
! Component: 200  -  total flux cleaned = 0.0020727 Jy
! Total flux subtracted in 200 components = 0.0020727 Jy
! Clean residual min=-0.009442 max=0.017310 Jy/beam
! Clean residual mean=0.000008 rms=0.003469 Jy/beam
! Combined flux in latest and established models = 0.13503 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 154 components and 0.13503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100238Jy  sigma=1.227555
! Fit after  self-cal, rms=0.101121Jy  sigma=1.222115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (69, 28).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114865 Jy
! Component: 100  -  total flux cleaned = 0.0145878 Jy
! Component: 150  -  total flux cleaned = 0.0161812 Jy
! Component: 200  -  total flux cleaned = 0.0166048 Jy
! Total flux subtracted in 200 components = 0.0166048 Jy
! Clean residual min=-0.006620 max=0.008018 Jy/beam
! Clean residual mean=0.000008 rms=0.002310 Jy/beam
! Combined flux in latest and established models = 0.151635 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 199 components and 0.151635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098964Jy  sigma=1.191139
! Fit after  self-cal, rms=0.098048Jy  sigma=1.184454
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098048Jy  sigma=1.184454
! Fit after  self-cal, rms=0.097753Jy  sigma=1.177324
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.75 mas, bmaj=20.43 mas, bpa=6.916 degrees
! Estimated noise=0.786152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444619 Jy
! Component: 100  -  total flux cleaned = 0.00462655 Jy
! Component: 150  -  total flux cleaned = 0.00424973 Jy
! Component: 200  -  total flux cleaned = 0.00403431 Jy
! Total flux subtracted in 200 components = 0.00403431 Jy
! Clean residual min=-0.004990 max=0.006441 Jy/beam
! Clean residual mean=0.000002 rms=0.001806 Jy/beam
! Combined flux in latest and established models = 0.155669 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 245 components and 0.155669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097118Jy  sigma=1.169376
! Fit after  self-cal, rms=0.097110Jy  sigma=1.166504
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023164 Jy
! Component: 100  -  total flux cleaned = 0.00302963 Jy
! Component: 150  -  total flux cleaned = 0.00239501 Jy
! Component: 200  -  total flux cleaned = 0.00197465 Jy
! Total flux subtracted in 200 components = 0.00197465 Jy
! Clean residual min=-0.004990 max=0.006182 Jy/beam
! Clean residual mean=0.000003 rms=0.001725 Jy/beam
! Combined flux in latest and established models = 0.157644 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 264 components and 0.157644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096845Jy  sigma=1.163934
! Fit after  self-cal, rms=0.096732Jy  sigma=1.163627
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096732Jy  sigma=1.163627
! Fit after  self-cal, rms=0.098311Jy  sigma=1.161605
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.897 mas, bmaj=21.74 mas, bpa=9.342 degrees
! Estimated noise=0.773993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256473 Jy
! Component: 100  -  total flux cleaned = -0.000639577 Jy
! Component: 150  -  total flux cleaned = -0.00105658 Jy
! Component: 200  -  total flux cleaned = -0.00135411 Jy
! Total flux subtracted in 200 components = -0.00135411 Jy
! Clean residual min=-0.004477 max=0.005922 Jy/beam
! Clean residual mean=0.000001 rms=0.001643 Jy/beam
! Combined flux in latest and established models = 0.156289 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 283 components and 0.156289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098117Jy  sigma=1.159435
! Fit after  self-cal, rms=0.098197Jy  sigma=1.158854
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.22981e-05 Jy
! Component: 100  -  total flux cleaned = -0.000351475 Jy
! Component: 150  -  total flux cleaned = -0.000961669 Jy
! Component: 200  -  total flux cleaned = -0.00133961 Jy
! Total flux subtracted in 200 components = -0.00133961 Jy
! Clean residual min=-0.004404 max=0.005904 Jy/beam
! Clean residual mean=0.000000 rms=0.001585 Jy/beam
! Combined flux in latest and established models = 0.15495 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 300 components and 0.15495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098078Jy  sigma=1.157485
! Fit after  self-cal, rms=0.098010Jy  sigma=1.157292
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.745 mas, bmaj=20.44 mas, bpa=7.325 degrees
! Estimated noise=0.775491 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.745 x 20.44 at 7.325 degrees (North through East)
! Clean map  min=-0.0089245  max=0.0804 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.565 mas, bmaj=18.32 mas, bpa=2.692 degrees
! Estimated noise=1.58735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.057535 Jy
! Component: 100  -  total flux cleaned = 0.0805371 Jy
! Component: 150  -  total flux cleaned = 0.0966859 Jy
! Component: 200  -  total flux cleaned = 0.108774 Jy
! Total flux subtracted in 200 components = 0.108774 Jy
! Clean residual min=-0.009786 max=0.010984 Jy/beam
! Clean residual mean=0.000026 rms=0.003345 Jy/beam
! Combined flux in latest and established models = 0.108774 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 67 model components to the UV plane model.
! The established model now contains 67 components and 0.108774 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.745 mas, bmaj=20.44 mas, bpa=7.325 degrees
! Estimated noise=0.775491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117632 Jy
! Component: 100  -  total flux cleaned = 0.0187313 Jy
! Component: 150  -  total flux cleaned = 0.0238693 Jy
! Component: 200  -  total flux cleaned = 0.0274412 Jy
! Total flux subtracted in 200 components = 0.0274412 Jy
! Clean residual min=-0.006934 max=0.007823 Jy/beam
! Clean residual mean=0.000016 rms=0.002571 Jy/beam
! Combined flux in latest and established models = 0.136215 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 119 components and 0.136215 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.897 mas, bmaj=21.74 mas, bpa=9.342 degrees
! Estimated noise=0.773993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480333 Jy
! Component: 100  -  total flux cleaned = 0.00755136 Jy
! Component: 150  -  total flux cleaned = 0.00896255 Jy
! Component: 200  -  total flux cleaned = 0.0102159 Jy
! Total flux subtracted in 200 components = 0.0102159 Jy
! Clean residual min=-0.005777 max=0.006833 Jy/beam
! Clean residual mean=0.000013 rms=0.002174 Jy/beam
! Combined flux in latest and established models = 0.146431 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000950239 Jy
! Component: 100  -  total flux cleaned = 0.00137352 Jy
! Component: 150  -  total flux cleaned = 0.00163119 Jy
! Component: 200  -  total flux cleaned = 0.00208788 Jy
! Total flux subtracted in 200 components = 0.00208788 Jy
! Clean residual min=-0.005007 max=0.005937 Jy/beam
! Clean residual mean=0.000009 rms=0.001858 Jy/beam
! Combined flux in latest and established models = 0.148519 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 167 components and 0.148519 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.745 mas, bmaj=20.44 mas, bpa=7.325 degrees
! Estimated noise=0.775491 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464263 Jy
! Component: 100  -  total flux cleaned = 0.000289868 Jy
! Component: 150  -  total flux cleaned = 0.000213714 Jy
! Component: 200  -  total flux cleaned = -9.05729e-05 Jy
! Total flux subtracted in 200 components = -9.05729e-05 Jy
! Clean residual min=-0.004557 max=0.005416 Jy/beam
! Clean residual mean=0.000006 rms=0.001560 Jy/beam
! Combined flux in latest and established models = 0.148428 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 210 components and 0.148428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098004Jy  sigma=1.158343
! Fit after  self-cal, rms=0.097710Jy  sigma=1.157355
wmodel J0706-2311_S_a_map.mod
! Writing 210 model components to file: J0706-2311_S_a_map.mod
wobs   J0706-2311_S_a_uvs.fits
! Writing UV FITS file: J0706-2311_S_a_uvs.fits
wwins  J0706-2311_S_a_map.win
! wwins: Wrote 2 windows to J0706-2311_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184476 Jy
! Component: 100  -  total flux cleaned = 0.00168977 Jy
! Component: 150  -  total flux cleaned = 0.00154273 Jy
! Component: 200  -  total flux cleaned = 0.00127132 Jy
! Component: 250  -  total flux cleaned = 0.00107651 Jy
! Component: 300  -  total flux cleaned = 0.000892396 Jy
! Component: 350  -  total flux cleaned = 0.00083378 Jy
! Component: 400  -  total flux cleaned = 0.000774258 Jy
! Component: 450  -  total flux cleaned = 0.00055569 Jy
! Component: 500  -  total flux cleaned = 0.000502398 Jy
! Component: 550  -  total flux cleaned = 0.000203823 Jy
! Component: 600  -  total flux cleaned = 0.000205303 Jy
! Component: 650  -  total flux cleaned = 0.000158594 Jy
! Component: 700  -  total flux cleaned = 2.29094e-05 Jy
! Component: 750  -  total flux cleaned = -6.4283e-05 Jy
! Component: 800  -  total flux cleaned = -0.000148906 Jy
! Component: 850  -  total flux cleaned = -0.000149188 Jy
! Component: 900  -  total flux cleaned = -0.000270404 Jy
! Component: 950  -  total flux cleaned = -0.000426174 Jy
! Component: 1000  -  total flux cleaned = -0.000387566 Jy
! Component: 1050  -  total flux cleaned = -0.000425013 Jy
! Component: 1100  -  total flux cleaned = -0.000461803 Jy
! Component: 1150  -  total flux cleaned = -0.000462069 Jy
! Component: 1200  -  total flux cleaned = -0.000566479 Jy
! Component: 1250  -  total flux cleaned = -0.000532755 Jy
! Component: 1300  -  total flux cleaned = -0.000632471 Jy
! Component: 1350  -  total flux cleaned = -0.000632378 Jy
! Component: 1400  -  total flux cleaned = -0.000664324 Jy
! Component: 1450  -  total flux cleaned = -0.000696059 Jy
! Component: 1500  -  total flux cleaned = -0.000788738 Jy
! Component: 1550  -  total flux cleaned = -0.000971411 Jy
! Component: 1600  -  total flux cleaned = -0.00115181 Jy
! Component: 1650  -  total flux cleaned = -0.00138933 Jy
! Component: 1700  -  total flux cleaned = -0.001624 Jy
! Component: 1750  -  total flux cleaned = -0.00185595 Jy
! Component: 1800  -  total flux cleaned = -0.00211378 Jy
! Component: 1850  -  total flux cleaned = -0.00236833 Jy
! Component: 1900  -  total flux cleaned = -0.00262013 Jy
! Component: 1950  -  total flux cleaned = -0.00286927 Jy
! Component: 2000  -  total flux cleaned = -0.00308834 Jy
! Component: 2050  -  total flux cleaned = -0.00333184 Jy
! Component: 2100  -  total flux cleaned = -0.00354601 Jy
! Component: 2150  -  total flux cleaned = -0.00373136 Jy
! Component: 2200  -  total flux cleaned = -0.00386284 Jy
! Component: 2250  -  total flux cleaned = -0.00409702 Jy
! Component: 2300  -  total flux cleaned = -0.00432902 Jy
! Component: 2350  -  total flux cleaned = -0.00453322 Jy
! Component: 2400  -  total flux cleaned = -0.00473577 Jy
! Component: 2450  -  total flux cleaned = -0.00496157 Jy
! Component: 2500  -  total flux cleaned = -0.00511103 Jy
! Component: 2550  -  total flux cleaned = -0.00530888 Jy
! Component: 2600  -  total flux cleaned = -0.00560393 Jy
! Component: 2650  -  total flux cleaned = -0.00579965 Jy
! Component: 2700  -  total flux cleaned = -0.00606739 Jy
! Component: 2750  -  total flux cleaned = -0.00628507 Jy
! Component: 2800  -  total flux cleaned = -0.00657393 Jy
! Component: 2850  -  total flux cleaned = -0.00676573 Jy
! Component: 2900  -  total flux cleaned = -0.00702796 Jy
! Component: 2950  -  total flux cleaned = -0.0072416 Jy
! Component: 3000  -  total flux cleaned = -0.00750169 Jy
! Component: 3050  -  total flux cleaned = -0.00776041 Jy
! Component: 3100  -  total flux cleaned = -0.00799469 Jy
! Component: 3150  -  total flux cleaned = -0.00822811 Jy
! Component: 3200  -  total flux cleaned = -0.00848391 Jy
! Component: 3250  -  total flux cleaned = -0.00873878 Jy
! Component: 3300  -  total flux cleaned = -0.00903901 Jy
! Component: 3350  -  total flux cleaned = -0.00929236 Jy
! Component: 3400  -  total flux cleaned = -0.00954503 Jy
! Component: 3450  -  total flux cleaned = -0.0097973 Jy
! Component: 3500  -  total flux cleaned = -0.0100489 Jy
! Component: 3550  -  total flux cleaned = -0.0102774 Jy
! Component: 3600  -  total flux cleaned = -0.0104827 Jy
! Component: 3650  -  total flux cleaned = -0.0106651 Jy
! Component: 3700  -  total flux cleaned = -0.0109157 Jy
! Component: 3750  -  total flux cleaned = -0.0111205 Jy
! Component: 3800  -  total flux cleaned = -0.0113479 Jy
! Component: 3850  -  total flux cleaned = -0.0115749 Jy
! Component: 3900  -  total flux cleaned = -0.0118016 Jy
! Component: 3950  -  total flux cleaned = -0.0120054 Jy
! Component: 4000  -  total flux cleaned = -0.0122092 Jy
! Component: 4050  -  total flux cleaned = -0.0123904 Jy
! Total flux subtracted in 4096 components = -0.0125714 Jy
! Clean residual min=-0.001378 max=0.001482 Jy/beam
! Clean residual mean=-0.000008 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.135857 Jy
keep
! Adding 358 model components to the UV plane model.
! The established model now contains 568 components and 0.135857 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0706-2311_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.745 x 20.44 at 7.325 degrees (North through East)
! Clean map  min=-0.0082121  max=0.080067 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0706-2311_S_a_map.fits
wmodel /vlbi/uf001/uva//J0706-2311_S_a_map.mod
! Writing 568 model components to file: /vlbi/uf001/uva//J0706-2311_S_a_map.mod
wobs   /vlbi/uf001/uva//J0706-2311_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0706-2311_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J0706-2311_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0706-2311_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0800671 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000391127 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.4655 1.4655 2.93099 5.86199 11.724 23.4479 46.8959 93.7918
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.08 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  204.708 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0706-2311_S_a_dfm.log closed on Sun Jan 13 23:18:38 2019