! Started logfile: /vlbi/uf001/uva//J0701-4634_S_a_dfm.log on Sun Jan 13 23:16:34 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0701-4634_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0701-4634_S_a_uva.fits
! AN table 1: 72 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.981944 visibilities/baseline/integration-bin.
! Found source: J0701-4634
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2121 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0701-4634_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.048536Jy  sigma=13.510709
! Fit after  self-cal, rms=0.738981Jy  sigma=9.509940
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.98 mas, bmaj=102.6 mas, bpa=-4.064 degrees
! Estimated noise=1.73379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196285 Jy
! Component: 100  -  total flux cleaned = 0.254358 Jy
! Total flux subtracted in 100 components = 0.254358 Jy
! Clean residual min=-0.019542 max=0.029312 Jy/beam
! Clean residual mean=-0.001158 rms=0.008253 Jy/beam
! Combined flux in latest and established models = 0.254358 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.254358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110714Jy  sigma=1.400527
! Fit after  self-cal, rms=0.110646Jy  sigma=1.399713
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.02 mas, bmaj=107.7 mas, bpa=-3.011 degrees
! Estimated noise=1.20469 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445253 Jy
! Component: 100  -  total flux cleaned = 0.0661101 Jy
! Component: 150  -  total flux cleaned = 0.0700068 Jy
! Component: 200  -  total flux cleaned = 0.0742359 Jy
! Total flux subtracted in 200 components = 0.0742359 Jy
! Clean residual min=-0.006259 max=0.006306 Jy/beam
! Clean residual mean=-0.000516 rms=0.003203 Jy/beam
! Combined flux in latest and established models = 0.328594 Jy
! Performing phase self-cal
! Adding 104 model components to the UV plane model.
! The established model now contains 130 components and 0.328594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091514Jy  sigma=1.154431
! Fit after  self-cal, rms=0.091330Jy  sigma=1.152475
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.02 x 107.7 at -3.011 degrees (North through East)
! Clean map  min=-0.010624  max=0.27097 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        1.06     LA        0.89     OV        1.07     
!   PT        1.01     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.01     LA        0.93     OV        1.01     
!   PT        0.99     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.00     LA        0.94     OV        1.05     
!   PT        1.02     
! 
! 
! Fit before self-cal, rms=0.091330Jy  sigma=1.152475
! Fit after  self-cal, rms=0.086954Jy  sigma=1.124551
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.1 mas, bmaj=107.2 mas, bpa=-2.998 degrees
! Estimated noise=1.1865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140652 Jy
! Component: 100  -  total flux cleaned = 0.0019129 Jy
! Component: 150  -  total flux cleaned = 0.00231475 Jy
! Component: 200  -  total flux cleaned = 0.00281107 Jy
! Total flux subtracted in 200 components = 0.00281107 Jy
! Clean residual min=-0.001081 max=0.001089 Jy/beam
! Clean residual mean=-0.000012 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.331405 Jy
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 237 components and 0.331405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086762Jy  sigma=1.122145
! Fit after  self-cal, rms=0.086773Jy  sigma=1.121850
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086773Jy  sigma=1.121850
! Fit after  self-cal, rms=0.086706Jy  sigma=1.120391
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.1 mas, bmaj=107.2 mas, bpa=-3.003 degrees
! Estimated noise=1.1869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103537 Jy
! Component: 100  -  total flux cleaned = 0.000890665 Jy
! Component: 150  -  total flux cleaned = 0.00134373 Jy
! Component: 200  -  total flux cleaned = 0.00154789 Jy
! Total flux subtracted in 200 components = 0.00154789 Jy
! Clean residual min=-0.000655 max=0.000653 Jy/beam
! Clean residual mean=-0.000006 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.332953 Jy
selfcal
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 317 components and 0.332953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086653Jy  sigma=1.119758
! Fit after  self-cal, rms=0.086654Jy  sigma=1.119741
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000531274 Jy
! Component: 100  -  total flux cleaned = 0.000534103 Jy
! Component: 150  -  total flux cleaned = 0.000437981 Jy
! Component: 200  -  total flux cleaned = 0.000225131 Jy
! Total flux subtracted in 200 components = 0.000225131 Jy
! Clean residual min=-0.000492 max=0.000488 Jy/beam
! Clean residual mean=-0.000003 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.333178 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 402 components and 0.333178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086630Jy  sigma=1.119456
! Fit after  self-cal, rms=0.086631Jy  sigma=1.119448
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086631Jy  sigma=1.119448
! Fit after  self-cal, rms=0.086539Jy  sigma=1.117360
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.1 mas, bmaj=107.2 mas, bpa=-3.015 degrees
! Estimated noise=1.18676 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000485468 Jy
! Component: 100  -  total flux cleaned = -0.000749576 Jy
! Component: 150  -  total flux cleaned = -0.000987395 Jy
! Component: 200  -  total flux cleaned = -0.00113547 Jy
! Total flux subtracted in 200 components = -0.00113547 Jy
! Clean residual min=-0.000396 max=0.000400 Jy/beam
! Clean residual mean=0.000002 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.332043 Jy
selfcal
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 495 components and 0.332043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086521Jy  sigma=1.117172
! Fit after  self-cal, rms=0.086528Jy  sigma=1.117145
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.73955e-05 Jy
! Component: 100  -  total flux cleaned = -4.13535e-05 Jy
! Component: 150  -  total flux cleaned = -4.11858e-05 Jy
! Component: 200  -  total flux cleaned = -8.32251e-05 Jy
! Total flux subtracted in 200 components = -8.32251e-05 Jy
! Clean residual min=-0.000338 max=0.000338 Jy/beam
! Clean residual mean=0.000002 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.331959 Jy
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 570 components and 0.331959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086517Jy  sigma=1.117036
! Fit after  self-cal, rms=0.086519Jy  sigma=1.117031
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086519Jy  sigma=1.117031
! Fit after  self-cal, rms=0.086524Jy  sigma=1.117013
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.71 mas, bmaj=109 mas, bpa=-3.144 degrees
! Estimated noise=1.18885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000297509 Jy
! Component: 100  -  total flux cleaned = -0.000547276 Jy
! Component: 150  -  total flux cleaned = -0.000624823 Jy
! Component: 200  -  total flux cleaned = -0.00073614 Jy
! Total flux subtracted in 200 components = -0.00073614 Jy
! Clean residual min=-0.000302 max=0.000298 Jy/beam
! Clean residual mean=0.000001 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.331223 Jy
selfcal
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 654 components and 0.331223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086514Jy  sigma=1.116913
! Fit after  self-cal, rms=0.086516Jy  sigma=1.116910
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.62403e-05 Jy
! Component: 100  -  total flux cleaned = 6.87485e-06 Jy
! Component: 150  -  total flux cleaned = 7.02149e-06 Jy
! Component: 200  -  total flux cleaned = 6.81838e-06 Jy
! Total flux subtracted in 200 components = 6.81838e-06 Jy
! Clean residual min=-0.000273 max=0.000271 Jy/beam
! Clean residual mean=0.000002 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.33123 Jy
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 723 components and 0.33123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086508Jy  sigma=1.116833
! Fit after  self-cal, rms=0.086509Jy  sigma=1.116830
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=14.1 mas, bmaj=107.2 mas, bpa=-3.017 degrees
! Estimated noise=1.18656 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.1 x 107.2 at -3.017 degrees (North through East)
! Clean map  min=-0.0041039  max=0.26526 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.07 mas, bmaj=102.3 mas, bpa=-4.062 degrees
! Estimated noise=1.72302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194825 Jy
! Component: 100  -  total flux cleaned = 0.250661 Jy
! Component: 150  -  total flux cleaned = 0.28341 Jy
! Component: 200  -  total flux cleaned = 0.303162 Jy
! Total flux subtracted in 200 components = 0.303162 Jy
! Clean residual min=-0.009134 max=0.010073 Jy/beam
! Clean residual mean=-0.000390 rms=0.003249 Jy/beam
! Combined flux in latest and established models = 0.303162 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.303162 Jy
! Inverting map and beam 
! Estimated beam: bmin=14.1 mas, bmaj=107.2 mas, bpa=-3.017 degrees
! Estimated noise=1.18656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151978 Jy
! Component: 100  -  total flux cleaned = 0.0172777 Jy
! Component: 150  -  total flux cleaned = 0.0188176 Jy
! Component: 200  -  total flux cleaned = 0.0195039 Jy
! Total flux subtracted in 200 components = 0.0195039 Jy
! Clean residual min=-0.002539 max=0.002535 Jy/beam
! Clean residual mean=-0.000169 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 0.322666 Jy
! Adding 124 model components to the UV plane model.
! The established model now contains 160 components and 0.322666 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.71 mas, bmaj=109 mas, bpa=-3.144 degrees
! Estimated noise=1.18885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115075 Jy
! Component: 100  -  total flux cleaned = 0.000578359 Jy
! Component: 150  -  total flux cleaned = 9.13626e-05 Jy
! Component: 200  -  total flux cleaned = -0.000483388 Jy
! Total flux subtracted in 200 components = -0.000483388 Jy
! Clean residual min=-0.001315 max=0.001318 Jy/beam
! Clean residual mean=-0.000102 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.322182 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000357146 Jy
! Component: 100  -  total flux cleaned = -0.00101464 Jy
! Component: 150  -  total flux cleaned = -0.0015974 Jy
! Component: 200  -  total flux cleaned = -0.00224097 Jy
! Total flux subtracted in 200 components = -0.00224097 Jy
! Clean residual min=-0.000860 max=0.000862 Jy/beam
! Clean residual mean=-0.000068 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.319941 Jy
! Adding 221 model components to the UV plane model.
! The established model now contains 377 components and 0.319941 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=14.1 mas, bmaj=107.2 mas, bpa=-3.017 degrees
! Estimated noise=1.18656 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000231176 Jy
! Component: 100  -  total flux cleaned = -0.000194259 Jy
! Component: 150  -  total flux cleaned = -0.000119332 Jy
! Component: 200  -  total flux cleaned = -0.000337058 Jy
! Total flux subtracted in 200 components = -0.000337058 Jy
! Clean residual min=-0.000583 max=0.000582 Jy/beam
! Clean residual mean=-0.000039 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.319604 Jy
selfcal
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 452 components and 0.319604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086538Jy  sigma=1.117265
! Fit after  self-cal, rms=0.086536Jy  sigma=1.117212
wmodel J0701-4634_S_a_map.mod
! Writing 452 model components to file: J0701-4634_S_a_map.mod
wobs   J0701-4634_S_a_uvs.fits
! Writing UV FITS file: J0701-4634_S_a_uvs.fits
wwins  J0701-4634_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J0701-4634_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.1 x 107.2 at -3.017 degrees (North through East)
! Clean map  min=-0.0038004  max=0.26444 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0701-4634_S_a_map.fits
wmodel /vlbi/uf001/uva//J0701-4634_S_a_map.mod
! Writing 452 model components to file: /vlbi/uf001/uva//J0701-4634_S_a_map.mod
wobs   /vlbi/uf001/uva//J0701-4634_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0701-4634_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J0701-4634_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.26444 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000283807 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.32197 0.32197 0.643941 1.28788 2.57576 5.15153 10.3031 20.6061 41.2122 82.4244
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.264 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  931.762 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0701-4634_S_a_dfm.log closed on Sun Jan 13 23:16:40 2019