! Started logfile: /vlbi/uf001/uvm//J0659+0813_X_a_dfm.log on Sun Jan 13 20:58:48 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J0659+0813_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J0659+0813_X_a_uvm.fits ! AN table 1: 4 integrations on 45 of 45 possible baselines. ! AN table 2: 16 integrations on 36 of 36 possible baselines. ! AN table 3: 9 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.651852 visibilities/baseline/integration-bin. ! Found source: J0659+0813 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6336 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0659+0813_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 16 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.042696Jy sigma=21.870800 ! Fit after self-cal, rms=0.737179Jy sigma=15.523674 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6586 mas, bmaj=1.606 mas, bpa=0.2597 degrees ! Estimated noise=0.66524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202671 Jy ! Component: 100 - total flux cleaned = 0.271142 Jy ! Total flux subtracted in 100 components = 0.271142 Jy ! Clean residual min=-0.011054 max=0.029376 Jy/beam ! Clean residual mean=-0.000005 rms=0.002674 Jy/beam ! Combined flux in latest and established models = 0.271142 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.271142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089960Jy sigma=1.809709 ! Fit after self-cal, rms=0.089097Jy sigma=1.791824 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309699 Jy ! Component: 100 - total flux cleaned = 0.0463429 Jy ! Total flux subtracted in 100 components = 0.0463429 Jy ! Clean residual min=-0.008934 max=0.014330 Jy/beam ! Clean residual mean=-0.000006 rms=0.001939 Jy/beam ! Combined flux in latest and established models = 0.317485 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.317484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075784Jy sigma=1.514173 ! Fit after self-cal, rms=0.075669Jy sigma=1.511676 ! Inverting map ! Added new window around map position (-1, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01415 Jy ! Component: 100 - total flux cleaned = 0.0229614 Jy ! Total flux subtracted in 100 components = 0.0229614 Jy ! Clean residual min=-0.008162 max=0.010043 Jy/beam ! Clean residual mean=-0.000005 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.340446 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.340446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071977Jy sigma=1.434018 ! Fit after self-cal, rms=0.071847Jy sigma=1.431191 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7784 mas, bmaj=1.767 mas, bpa=2.988 degrees ! Estimated noise=0.509822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104421 Jy ! Component: 100 - total flux cleaned = 0.0174998 Jy ! Component: 150 - total flux cleaned = 0.0227831 Jy ! Component: 200 - total flux cleaned = 0.0268036 Jy ! Total flux subtracted in 200 components = 0.0268036 Jy ! Clean residual min=-0.008167 max=0.013284 Jy/beam ! Clean residual mean=-0.000006 rms=0.002078 Jy/beam ! Combined flux in latest and established models = 0.367249 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.367249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069861Jy sigma=1.390589 ! Fit after self-cal, rms=0.069775Jy sigma=1.388588 ! Inverting map ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109226 Jy ! Component: 100 - total flux cleaned = 0.0168348 Jy ! Component: 150 - total flux cleaned = 0.0211955 Jy ! Component: 200 - total flux cleaned = 0.023305 Jy ! Total flux subtracted in 200 components = 0.023305 Jy ! Clean residual min=-0.007553 max=0.010298 Jy/beam ! Clean residual mean=-0.000004 rms=0.001838 Jy/beam ! Combined flux in latest and established models = 0.390554 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 58 components and 0.390554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067658Jy sigma=1.347549 ! Fit after self-cal, rms=0.067473Jy sigma=1.343685 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7784 x 1.767 at 2.988 degrees (North through East) ! Clean map min=-0.0069689 max=0.2544 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.08 HN 0.94 KP 1.07 ! LA 0.91 MK 1.01 NL 1.17 OV 1.07 ! PT 1.00* SC 1.00 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.96 HN 0.99 KP 0.95 ! LA 0.95 MK 1.02 NL 1.10 OV 0.94 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 HN 0.97 NL 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.03 HN 0.97 KP 1.06 ! LA 0.91 MK 1.01 NL 1.26 OV 1.15 ! PT 1.00* SC 0.92 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 1.04 KP 0.88 ! LA 0.92 MK 1.00 NL 1.14 OV 0.98 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 HN 1.00 NL 1.00 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.09 HN 0.97 KP 1.07 ! LA 0.85 MK 1.05 NL 1.18 OV 1.06 ! PT 1.00* SC 0.99 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.97 HN 1.01 KP 0.92 ! LA 0.93 MK 0.98 NL 1.14 OV 0.95 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 HN 0.93 NL 1.02 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.99 HN 0.92 KP 1.10 ! LA 0.96 MK 1.03 NL 1.20 OV 1.02 ! PT 1.00* SC 0.97 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 0.98 KP 0.93 ! LA 0.89 MK 1.03 NL 1.09 OV 0.97 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 HN 1.00 NL 0.97 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.05 HN 0.98 KP 1.06 ! LA 0.98 MK 0.98 NL 1.18 OV 1.04 ! PT 1.00* SC 1.05 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 0.98 KP 0.91 ! LA 0.91 MK 1.01 NL 1.10 OV 0.97 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 HN 0.91 NL 1.00 SC 0.86 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 HN 0.98 KP 1.04 ! LA 1.02 MK 0.97 NL 1.19 OV 1.06 ! PT 1.00* SC 1.01 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.99 HN 0.94 KP 0.88 ! LA 0.93 MK 1.03 NL 1.12 OV 0.96 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 HN 0.95 NL 0.97 SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.97 KP 1.06 ! LA 0.93 MK 1.03 NL 1.21 OV 1.03 ! PT 1.00* SC 1.09 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.96 HN 0.97 KP 0.91 ! LA 0.92 MK 1.01 NL 1.11 OV 0.94 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 HN 0.92 NL 1.04 SC 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.10 HN 1.08 KP 1.07 ! LA 0.93 MK 1.05 NL 1.23 OV 0.98 ! PT 1.00* SC 1.03 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.98 KP 0.92 ! LA 0.93 MK 1.01 NL 1.11 OV 0.95 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 1.01 NL 1.03 SC 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.08 HN 0.94 KP 1.05 ! LA 0.97 MK 1.04 NL 1.23 OV 1.05 ! PT 1.00* SC 1.04 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.00 KP 0.97 ! LA 0.94 MK 0.99 NL 1.11 OV 0.91 ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 HN 0.95 NL 1.02 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.15 HN 0.98 KP 1.14 ! LA 0.93 MK 1.04 NL 1.17 OV 1.07 ! PT 1.00* SC 0.95 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 HN 1.03 KP 0.88 ! LA 0.91 MK 1.03 NL 1.07 OV 0.95 ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 HN 0.99 NL 0.95 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.97 KP 1.08 ! LA 0.95 MK 1.09 NL 1.28 OV 1.04 ! PT 1.00* SC 1.00 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.96 HN 0.97 KP 0.91 ! LA 0.92 MK 1.04 NL 1.11 OV 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 HN 0.90 NL 1.09 SC 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.10 HN 1.02 KP 1.10 ! LA 0.96 MK 1.07 NL 1.28 OV 1.04 ! PT 1.00* SC 0.99 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 1.00 KP 0.92 ! LA 0.94 MK 1.00 NL 1.12 OV 0.94 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 HN 0.95 NL 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.067473Jy sigma=1.343685 ! Fit after self-cal, rms=0.061279Jy sigma=1.214917 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7766 mas, bmaj=1.755 mas, bpa=2.995 degrees ! Estimated noise=0.518555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520635 Jy ! Component: 100 - total flux cleaned = 0.00598037 Jy ! Component: 150 - total flux cleaned = 0.00586252 Jy ! Component: 200 - total flux cleaned = 0.00547578 Jy ! Total flux subtracted in 200 components = 0.00547578 Jy ! Clean residual min=-0.004019 max=0.004014 Jy/beam ! Clean residual mean=0.000000 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.39603 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 90 components and 0.39603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060481Jy sigma=1.196913 ! Fit after self-cal, rms=0.060454Jy sigma=1.195604 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060454Jy sigma=1.195604 ! Fit after self-cal, rms=0.059545Jy sigma=1.175912 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7764 mas, bmaj=1.758 mas, bpa=2.933 degrees ! Estimated noise=0.517396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127192 Jy ! Component: 100 - total flux cleaned = 0.00147715 Jy ! Component: 150 - total flux cleaned = 0.00171916 Jy ! Component: 200 - total flux cleaned = 0.00171638 Jy ! Total flux subtracted in 200 components = 0.00171638 Jy ! Clean residual min=-0.003133 max=0.002967 Jy/beam ! Clean residual mean=-0.000000 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.397747 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 114 components and 0.397747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059265Jy sigma=1.169744 ! Fit after self-cal, rms=0.059241Jy sigma=1.169421 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.89927e-05 Jy ! Component: 100 - total flux cleaned = 0.000260381 Jy ! Component: 150 - total flux cleaned = 0.000462003 Jy ! Component: 200 - total flux cleaned = 0.00078965 Jy ! Total flux subtracted in 200 components = 0.00078965 Jy ! Clean residual min=-0.003084 max=0.002878 Jy/beam ! Clean residual mean=-0.000000 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.398536 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 127 components and 0.398536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059151Jy sigma=1.167492 ! Fit after self-cal, rms=0.059143Jy sigma=1.167418 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059143Jy sigma=1.167418 ! Fit after self-cal, rms=0.059011Jy sigma=1.165652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7763 mas, bmaj=1.76 mas, bpa=2.927 degrees ! Estimated noise=0.516058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000698782 Jy ! Component: 100 - total flux cleaned = -0.000762614 Jy ! Component: 150 - total flux cleaned = -0.000712762 Jy ! Component: 200 - total flux cleaned = -0.000538989 Jy ! Total flux subtracted in 200 components = -0.000538989 Jy ! Clean residual min=-0.002736 max=0.002670 Jy/beam ! Clean residual mean=-0.000000 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.397997 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 140 components and 0.397997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058909Jy sigma=1.163635 ! Fit after self-cal, rms=0.058904Jy sigma=1.163543 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163609 Jy ! Component: 100 - total flux cleaned = 2.83065e-05 Jy ! Component: 150 - total flux cleaned = 0.000133386 Jy ! Component: 200 - total flux cleaned = 0.000296304 Jy ! Total flux subtracted in 200 components = 0.000296304 Jy ! Clean residual min=-0.002736 max=0.002662 Jy/beam ! Clean residual mean=-0.000000 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.398294 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 147 components and 0.398294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058860Jy sigma=1.162704 ! Fit after self-cal, rms=0.058856Jy sigma=1.162671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058856Jy sigma=1.162671 ! Fit after self-cal, rms=0.058780Jy sigma=1.162162 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.829 mas, bmaj=2.751 mas, bpa=4.849 degrees ! Estimated noise=0.713577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.15063e-05 Jy ! Component: 100 - total flux cleaned = -0.000272826 Jy ! Component: 150 - total flux cleaned = -0.000455263 Jy ! Component: 200 - total flux cleaned = -0.000549334 Jy ! Total flux subtracted in 200 components = -0.000549334 Jy ! Clean residual min=-0.003337 max=0.004271 Jy/beam ! Clean residual mean=0.000001 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.397744 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 161 components and 0.397744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058738Jy sigma=1.161478 ! Fit after self-cal, rms=0.058734Jy sigma=1.161401 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.4, 9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279879 Jy ! Component: 100 - total flux cleaned = 0.00346233 Jy ! Component: 150 - total flux cleaned = 0.00346463 Jy ! Component: 200 - total flux cleaned = 0.00335746 Jy ! Total flux subtracted in 200 components = 0.00335746 Jy ! Clean residual min=-0.003270 max=0.002784 Jy/beam ! Clean residual mean=-0.000000 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.401102 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 197 components and 0.401102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058596Jy sigma=1.159442 ! Fit after self-cal, rms=0.058569Jy sigma=1.158871 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7761 mas, bmaj=1.761 mas, bpa=2.941 degrees ! Estimated noise=0.515266 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7761 x 1.761 at 2.941 degrees (North through East) ! Clean map min=-0.0023963 max=0.25372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6581 mas, bmaj=1.619 mas, bpa=0.3487 degrees ! Estimated noise=0.676154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204158 Jy ! Component: 100 - total flux cleaned = 0.274381 Jy ! Component: 150 - total flux cleaned = 0.305137 Jy ! Component: 200 - total flux cleaned = 0.321578 Jy ! Total flux subtracted in 200 components = 0.321578 Jy ! Clean residual min=-0.006169 max=0.008504 Jy/beam ! Clean residual mean=-0.000005 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.321578 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.321578 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7761 mas, bmaj=1.761 mas, bpa=2.941 degrees ! Estimated noise=0.515266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134272 Jy ! Component: 100 - total flux cleaned = 0.0224084 Jy ! Component: 150 - total flux cleaned = 0.0293111 Jy ! Component: 200 - total flux cleaned = 0.034948 Jy ! Total flux subtracted in 200 components = 0.034948 Jy ! Clean residual min=-0.003839 max=0.004314 Jy/beam ! Clean residual mean=-0.000003 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.356526 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.356526 Jy ! Inverting map ! Added new window around map position (-4.6, 26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501266 Jy ! Component: 100 - total flux cleaned = 0.00928632 Jy ! Component: 150 - total flux cleaned = 0.0130452 Jy ! Component: 200 - total flux cleaned = 0.0161255 Jy ! Total flux subtracted in 200 components = 0.0161255 Jy ! Clean residual min=-0.003131 max=0.003569 Jy/beam ! Clean residual mean=-0.000002 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.372652 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 65 components and 0.372652 Jy ! Inverting map ! Added new window around map position (1, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352635 Jy ! Component: 100 - total flux cleaned = 0.00603143 Jy ! Component: 150 - total flux cleaned = 0.00799752 Jy ! Component: 200 - total flux cleaned = 0.00942221 Jy ! Total flux subtracted in 200 components = 0.00942221 Jy ! Clean residual min=-0.002822 max=0.002468 Jy/beam ! Clean residual mean=-0.000001 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.382074 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 87 components and 0.382074 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.829 mas, bmaj=2.751 mas, bpa=4.849 degrees ! Estimated noise=0.713577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041533 Jy ! Component: 100 - total flux cleaned = 0.00671627 Jy ! Component: 150 - total flux cleaned = 0.00852329 Jy ! Component: 200 - total flux cleaned = 0.010252 Jy ! Total flux subtracted in 200 components = 0.010252 Jy ! Clean residual min=-0.003294 max=0.002841 Jy/beam ! Clean residual mean=-0.000001 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.392326 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142686 Jy ! Component: 100 - total flux cleaned = 0.00242178 Jy ! Component: 150 - total flux cleaned = 0.00326283 Jy ! Component: 200 - total flux cleaned = 0.00387205 Jy ! Total flux subtracted in 200 components = 0.00387205 Jy ! Clean residual min=-0.003157 max=0.002586 Jy/beam ! Clean residual mean=-0.000001 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.396198 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 147 components and 0.396198 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7761 mas, bmaj=1.761 mas, bpa=2.941 degrees ! Estimated noise=0.515266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.60281e-05 Jy ! Component: 100 - total flux cleaned = 0.000488165 Jy ! Component: 150 - total flux cleaned = 0.000868569 Jy ! Component: 200 - total flux cleaned = 0.00115401 Jy ! Total flux subtracted in 200 components = 0.00115401 Jy ! Clean residual min=-0.002709 max=0.002449 Jy/beam ! Clean residual mean=-0.000000 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.397352 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 172 components and 0.397352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058509Jy sigma=1.158203 ! Fit after self-cal, rms=0.058474Jy sigma=1.157460 wmodel J0659+0813_X_a_map.mod ! Writing 172 model components to file: J0659+0813_X_a_map.mod wobs J0659+0813_X_a_uvs.fits ! Writing UV FITS file: J0659+0813_X_a_uvs.fits wwins J0659+0813_X_a_map.win ! wwins: Wrote 7 windows to J0659+0813_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000445196 Jy ! Component: 100 - total flux cleaned = -0.000703321 Jy ! Component: 150 - total flux cleaned = -0.000622394 Jy ! Component: 200 - total flux cleaned = -0.000464805 Jy ! Component: 250 - total flux cleaned = -0.000311672 Jy ! Component: 300 - total flux cleaned = -0.000163627 Jy ! Component: 350 - total flux cleaned = -5.49691e-05 Jy ! Component: 400 - total flux cleaned = -5.55803e-05 Jy ! Component: 450 - total flux cleaned = -5.52018e-05 Jy ! Component: 500 - total flux cleaned = 4.7833e-05 Jy ! Component: 550 - total flux cleaned = -8.91218e-05 Jy ! Component: 600 - total flux cleaned = -0.000156336 Jy ! Component: 650 - total flux cleaned = -0.000221713 Jy ! Component: 700 - total flux cleaned = -0.000188866 Jy ! Component: 750 - total flux cleaned = -0.000188247 Jy ! Component: 800 - total flux cleaned = -0.000284085 Jy ! Component: 850 - total flux cleaned = -0.000252034 Jy ! Component: 900 - total flux cleaned = -0.00028357 Jy ! Component: 950 - total flux cleaned = -0.000221896 Jy ! Component: 1000 - total flux cleaned = -0.000221736 Jy ! Component: 1050 - total flux cleaned = -0.000161425 Jy ! Component: 1100 - total flux cleaned = -0.000101252 Jy ! Component: 1150 - total flux cleaned = 1.69314e-05 Jy ! Component: 1200 - total flux cleaned = 1.64435e-05 Jy ! Component: 1250 - total flux cleaned = 1.68441e-05 Jy ! Component: 1300 - total flux cleaned = -1.15856e-05 Jy ! Component: 1350 - total flux cleaned = -3.98911e-05 Jy ! Component: 1400 - total flux cleaned = 7.34482e-05 Jy ! Component: 1450 - total flux cleaned = 0.000101198 Jy ! Component: 1500 - total flux cleaned = -6.58441e-05 Jy ! Component: 1550 - total flux cleaned = -0.000120782 Jy ! Component: 1600 - total flux cleaned = -1.12179e-05 Jy ! Component: 1650 - total flux cleaned = -9.28383e-05 Jy ! Component: 1700 - total flux cleaned = -6.61578e-05 Jy ! Component: 1750 - total flux cleaned = -3.9007e-05 Jy ! Component: 1800 - total flux cleaned = -6.53502e-05 Jy ! Component: 1850 - total flux cleaned = -3.89652e-05 Jy ! Component: 1900 - total flux cleaned = -3.879e-05 Jy ! Component: 1950 - total flux cleaned = 6.50347e-05 Jy ! Component: 2000 - total flux cleaned = -6.37707e-05 Jy ! Component: 2050 - total flux cleaned = -3.80142e-05 Jy ! Component: 2100 - total flux cleaned = -1.22709e-05 Jy ! Component: 2150 - total flux cleaned = -3.80711e-05 Jy ! Component: 2200 - total flux cleaned = -3.81571e-05 Jy ! Component: 2250 - total flux cleaned = -0.000112713 Jy ! Component: 2300 - total flux cleaned = -8.78743e-05 Jy ! Component: 2350 - total flux cleaned = -6.3695e-05 Jy ! Component: 2400 - total flux cleaned = -8.79579e-05 Jy ! Component: 2450 - total flux cleaned = -8.78734e-05 Jy ! Component: 2500 - total flux cleaned = -0.000111797 Jy ! Component: 2550 - total flux cleaned = -6.34633e-05 Jy ! Component: 2600 - total flux cleaned = -3.97574e-05 Jy ! Component: 2650 - total flux cleaned = 7.41083e-06 Jy ! Component: 2700 - total flux cleaned = -6.32863e-05 Jy ! Component: 2750 - total flux cleaned = -0.000110125 Jy ! Component: 2800 - total flux cleaned = -0.000202743 Jy ! Component: 2850 - total flux cleaned = -0.000110415 Jy ! Component: 2900 - total flux cleaned = -0.000110469 Jy ! Component: 2950 - total flux cleaned = -0.000179067 Jy ! Component: 3000 - total flux cleaned = -0.000133591 Jy ! Component: 3050 - total flux cleaned = -0.000111302 Jy ! Component: 3100 - total flux cleaned = -6.65252e-05 Jy ! Component: 3150 - total flux cleaned = -2.22369e-05 Jy ! Component: 3200 - total flux cleaned = -2.21544e-05 Jy ! Component: 3250 - total flux cleaned = -8.81829e-05 Jy ! Component: 3300 - total flux cleaned = -0.000110116 Jy ! Component: 3350 - total flux cleaned = -4.4897e-05 Jy ! Component: 3400 - total flux cleaned = -1.60068e-06 Jy ! Component: 3450 - total flux cleaned = 6.31264e-05 Jy ! Component: 3500 - total flux cleaned = 2.01517e-05 Jy ! Component: 3550 - total flux cleaned = 0.000105417 Jy ! Component: 3600 - total flux cleaned = 0.00010551 Jy ! Component: 3650 - total flux cleaned = 0.000126595 Jy ! Component: 3700 - total flux cleaned = 0.000168515 Jy ! Component: 3750 - total flux cleaned = 0.000106055 Jy ! Component: 3800 - total flux cleaned = 0.000209928 Jy ! Component: 3850 - total flux cleaned = 0.000147809 Jy ! Component: 3900 - total flux cleaned = 0.000147735 Jy ! Component: 3950 - total flux cleaned = 0.000127401 Jy ! Component: 4000 - total flux cleaned = 0.000127341 Jy ! Component: 4050 - total flux cleaned = 0.000127296 Jy ! Total flux subtracted in 4096 components = 4.66803e-05 Jy ! Clean residual min=-0.001319 max=0.001293 Jy/beam ! Clean residual mean=-0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.397399 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 509 components and 0.397399 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J0659+0813_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7761 x 1.761 at 2.941 degrees (North through East) ! Clean map min=-0.0019268 max=0.25428 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J0659+0813_X_a_map.fits wmodel /vlbi/uf001/uvm//J0659+0813_X_a_map.mod ! Writing 509 model components to file: /vlbi/uf001/uvm//J0659+0813_X_a_map.mod wobs /vlbi/uf001/uvm//J0659+0813_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J0659+0813_X_a_uvs.fits wwins /vlbi/uf001/uvm//J0659+0813_X_a_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J0659+0813_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.25428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000350839 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.41392 0.41392 0.827841 1.65568 3.31136 6.62273 13.2455 26.4909 52.9818 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.254 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 724.776 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J0659+0813_X_a_dfm.log closed on Sun Jan 13 20:58:53 2019