! Started logfile: /vlbi/uf001/uva//J0650-2849_S_b_dfm.log on Sun Jan 13 23:12:07 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J0650-2849_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0650-2849_S_b_uva.fits ! AN table 1: 72 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.99504 visibilities/baseline/integration-bin. ! Found source: J0650-2849 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 6018 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0650-2849_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.025810Jy sigma=15.982864 ! Fit after self-cal, rms=0.860742Jy sigma=13.292740 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=13.83 mas, bpa=-24.4 degrees ! Estimated noise=0.913546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109849 Jy ! Component: 100 - total flux cleaned = 0.136832 Jy ! Total flux subtracted in 100 components = 0.136832 Jy ! Clean residual min=-0.008037 max=0.010852 Jy/beam ! Clean residual mean=-0.000034 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.136832 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.136832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097334Jy sigma=1.267034 ! Fit after self-cal, rms=0.097370Jy sigma=1.266822 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=14.85 mas, bpa=-23.58 degrees ! Estimated noise=0.609467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152738 Jy ! Component: 100 - total flux cleaned = 0.0236981 Jy ! Component: 150 - total flux cleaned = 0.0289833 Jy ! Component: 200 - total flux cleaned = 0.032625 Jy ! Total flux subtracted in 200 components = 0.032625 Jy ! Clean residual min=-0.005263 max=0.005019 Jy/beam ! Clean residual mean=-0.000024 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.169457 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 59 components and 0.169457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.094968Jy sigma=1.219034 ! Fit after self-cal, rms=0.095040Jy sigma=1.218499 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 14.85 at -23.58 degrees (North through East) ! Clean map min=-0.0051397 max=0.14386 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.06 KP 0.96 ! LA 0.95 MK 1.01 NL 1.05 OV 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.00 HN 1.11 KP 0.97 ! LA 0.95 MK 0.99 NL 0.98 OV 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.11 KP 0.98 ! LA 0.97 MK 1.00 NL 1.03 OV 0.95 ! ! ! Fit before self-cal, rms=0.095040Jy sigma=1.218499 ! Fit after self-cal, rms=0.102439Jy sigma=1.206964 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=15.07 mas, bpa=-23.88 degrees ! Estimated noise=0.608295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001187 Jy ! Component: 100 - total flux cleaned = -0.00129838 Jy ! Component: 150 - total flux cleaned = -0.00134665 Jy ! Component: 200 - total flux cleaned = -0.00130964 Jy ! Total flux subtracted in 200 components = -0.00130964 Jy ! Clean residual min=-0.004737 max=0.004405 Jy/beam ! Clean residual mean=-0.000020 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.168147 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.168147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102360Jy sigma=1.206243 ! Fit after self-cal, rms=0.102490Jy sigma=1.206010 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102490Jy sigma=1.206010 ! Fit after self-cal, rms=0.103700Jy sigma=1.205773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=15.11 mas, bpa=-24 degrees ! Estimated noise=0.609458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000792381 Jy ! Component: 100 - total flux cleaned = -0.00101726 Jy ! Component: 150 - total flux cleaned = -0.00105324 Jy ! Component: 200 - total flux cleaned = -0.00102248 Jy ! Total flux subtracted in 200 components = -0.00102248 Jy ! Clean residual min=-0.004633 max=0.004340 Jy/beam ! Clean residual mean=-0.000019 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.167125 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.167125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103642Jy sigma=1.205303 ! Fit after self-cal, rms=0.103640Jy sigma=1.205282 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69424e-05 Jy ! Component: 100 - total flux cleaned = 0.00010264 Jy ! Component: 150 - total flux cleaned = 0.000127054 Jy ! Component: 200 - total flux cleaned = 0.000175385 Jy ! Total flux subtracted in 200 components = 0.000175385 Jy ! Clean residual min=-0.004606 max=0.004298 Jy/beam ! Clean residual mean=-0.000020 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.1673 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 0.1673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103616Jy sigma=1.205151 ! Fit after self-cal, rms=0.103610Jy sigma=1.205137 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103610Jy sigma=1.205137 ! Fit after self-cal, rms=0.102204Jy sigma=1.196010 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=15.16 mas, bpa=-24.12 degrees ! Estimated noise=0.60926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103525 Jy ! Component: 100 - total flux cleaned = -0.0010716 Jy ! Component: 150 - total flux cleaned = -0.00107128 Jy ! Component: 200 - total flux cleaned = -0.00104498 Jy ! Total flux subtracted in 200 components = -0.00104498 Jy ! Clean residual min=-0.002881 max=0.002581 Jy/beam ! Clean residual mean=-0.000000 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.166255 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.166255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102166Jy sigma=1.195693 ! Fit after self-cal, rms=0.102168Jy sigma=1.195489 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171522 Jy ! Component: 100 - total flux cleaned = -0.000124977 Jy ! Component: 150 - total flux cleaned = -8.35813e-05 Jy ! Component: 200 - total flux cleaned = -4.51082e-05 Jy ! Total flux subtracted in 200 components = -4.51082e-05 Jy ! Clean residual min=-0.002895 max=0.002486 Jy/beam ! Clean residual mean=-0.000000 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.16621 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 124 components and 0.16621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102152Jy sigma=1.195363 ! Fit after self-cal, rms=0.102147Jy sigma=1.195345 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102147Jy sigma=1.195345 ! Fit after self-cal, rms=0.102772Jy sigma=1.195176 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.44 mas, bmaj=24.68 mas, bpa=-12.37 degrees ! Estimated noise=0.746472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000746814 Jy ! Component: 100 - total flux cleaned = -0.000893919 Jy ! Component: 150 - total flux cleaned = -0.000927797 Jy ! Component: 200 - total flux cleaned = -0.000941652 Jy ! Total flux subtracted in 200 components = -0.000941652 Jy ! Clean residual min=-0.002402 max=0.002401 Jy/beam ! Clean residual mean=0.000001 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.165269 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 145 components and 0.165269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102764Jy sigma=1.195067 ! Fit after self-cal, rms=0.102769Jy sigma=1.195047 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.67981e-05 Jy ! Component: 100 - total flux cleaned = -3.3882e-05 Jy ! Component: 150 - total flux cleaned = -9.81417e-06 Jy ! Component: 200 - total flux cleaned = -9.89198e-06 Jy ! Total flux subtracted in 200 components = -9.89198e-06 Jy ! Clean residual min=-0.002372 max=0.002429 Jy/beam ! Clean residual mean=0.000001 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.165259 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 149 components and 0.165259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102764Jy sigma=1.195014 ! Fit after self-cal, rms=0.102764Jy sigma=1.195010 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=15.2 mas, bpa=-24.22 degrees ! Estimated noise=0.609081 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 15.2 at -24.22 degrees (North through East) ! Clean map min=-0.0026123 max=0.14476 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.591 mas, bmaj=14.17 mas, bpa=-24.97 degrees ! Estimated noise=0.918059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110127 Jy ! Component: 100 - total flux cleaned = 0.134784 Jy ! Component: 150 - total flux cleaned = 0.144882 Jy ! Component: 200 - total flux cleaned = 0.151407 Jy ! Total flux subtracted in 200 components = 0.151407 Jy ! Clean residual min=-0.004485 max=0.004814 Jy/beam ! Clean residual mean=-0.000004 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.151407 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.151407 Jy ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=15.2 mas, bpa=-24.22 degrees ! Estimated noise=0.609081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541481 Jy ! Component: 100 - total flux cleaned = 0.00837932 Jy ! Component: 150 - total flux cleaned = 0.0102916 Jy ! Component: 200 - total flux cleaned = 0.0116027 Jy ! Total flux subtracted in 200 components = 0.0116027 Jy ! Clean residual min=-0.002750 max=0.002491 Jy/beam ! Clean residual mean=0.000001 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.163009 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 72 components and 0.16301 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.44 mas, bmaj=24.68 mas, bpa=-12.37 degrees ! Estimated noise=0.746472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113767 Jy ! Component: 100 - total flux cleaned = 0.00119135 Jy ! Component: 150 - total flux cleaned = 0.00124007 Jy ! Component: 200 - total flux cleaned = 0.00128535 Jy ! Total flux subtracted in 200 components = 0.00128535 Jy ! Clean residual min=-0.002536 max=0.002455 Jy/beam ! Clean residual mean=0.000001 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.164295 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.25645e-05 Jy ! Component: 100 - total flux cleaned = 0.000103068 Jy ! Component: 150 - total flux cleaned = 0.000140572 Jy ! Component: 200 - total flux cleaned = 0.000176225 Jy ! Total flux subtracted in 200 components = 0.000176225 Jy ! Clean residual min=-0.002509 max=0.002406 Jy/beam ! Clean residual mean=0.000001 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.164471 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 109 components and 0.164471 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=15.2 mas, bpa=-24.22 degrees ! Estimated noise=0.609081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.23144e-05 Jy ! Component: 100 - total flux cleaned = 4.34607e-05 Jy ! Component: 150 - total flux cleaned = 0.000112057 Jy ! Component: 200 - total flux cleaned = 0.000152756 Jy ! Total flux subtracted in 200 components = 0.000152756 Jy ! Clean residual min=-0.002771 max=0.002376 Jy/beam ! Clean residual mean=0.000000 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.164624 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 124 components and 0.164624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102759Jy sigma=1.195102 ! Fit after self-cal, rms=0.102720Jy sigma=1.195064 wmodel J0650-2849_S_b_map.mod ! Writing 124 model components to file: J0650-2849_S_b_map.mod wobs J0650-2849_S_b_uvs.fits ! Writing UV FITS file: J0650-2849_S_b_uvs.fits wwins J0650-2849_S_b_map.win ! wwins: Wrote 1 windows to J0650-2849_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103447 Jy ! Component: 100 - total flux cleaned = -0.00120622 Jy ! Component: 150 - total flux cleaned = -0.0013674 Jy ! Component: 200 - total flux cleaned = -0.00151834 Jy ! Component: 250 - total flux cleaned = -0.00173378 Jy ! Component: 300 - total flux cleaned = -0.0018366 Jy ! Component: 350 - total flux cleaned = -0.00196855 Jy ! Component: 400 - total flux cleaned = -0.00187296 Jy ! Component: 450 - total flux cleaned = -0.00190409 Jy ! Component: 500 - total flux cleaned = -0.00187389 Jy ! Component: 550 - total flux cleaned = -0.00202131 Jy ! Component: 600 - total flux cleaned = -0.0021075 Jy ! Component: 650 - total flux cleaned = -0.00221888 Jy ! Component: 700 - total flux cleaned = -0.00224615 Jy ! Component: 750 - total flux cleaned = -0.00230003 Jy ! Component: 800 - total flux cleaned = -0.00237883 Jy ! Component: 850 - total flux cleaned = -0.00230103 Jy ! Component: 900 - total flux cleaned = -0.0023518 Jy ! Component: 950 - total flux cleaned = -0.0023272 Jy ! Component: 1000 - total flux cleaned = -0.00235181 Jy ! Component: 1050 - total flux cleaned = -0.00239972 Jy ! Component: 1100 - total flux cleaned = -0.00232784 Jy ! Component: 1150 - total flux cleaned = -0.00232793 Jy ! Component: 1200 - total flux cleaned = -0.00239728 Jy ! Component: 1250 - total flux cleaned = -0.00237456 Jy ! Component: 1300 - total flux cleaned = -0.00239684 Jy ! Component: 1350 - total flux cleaned = -0.00239656 Jy ! Component: 1400 - total flux cleaned = -0.00237477 Jy ! Component: 1450 - total flux cleaned = -0.00233199 Jy ! Component: 1500 - total flux cleaned = -0.00231106 Jy ! Component: 1550 - total flux cleaned = -0.00224931 Jy ! Component: 1600 - total flux cleaned = -0.00222945 Jy ! Component: 1650 - total flux cleaned = -0.00219011 Jy ! Component: 1700 - total flux cleaned = -0.00226966 Jy ! Component: 1750 - total flux cleaned = -0.00226957 Jy ! Component: 1800 - total flux cleaned = -0.002308 Jy ! Component: 1850 - total flux cleaned = -0.00230785 Jy ! Component: 1900 - total flux cleaned = -0.00240185 Jy ! Component: 1950 - total flux cleaned = -0.00238326 Jy ! Component: 2000 - total flux cleaned = -0.00242002 Jy ! Component: 2050 - total flux cleaned = -0.00258323 Jy ! Component: 2100 - total flux cleaned = -0.00261868 Jy ! Component: 2150 - total flux cleaned = -0.00267147 Jy ! Component: 2200 - total flux cleaned = -0.00274189 Jy ! Component: 2250 - total flux cleaned = -0.00281116 Jy ! Component: 2300 - total flux cleaned = -0.00291402 Jy ! Component: 2350 - total flux cleaned = -0.00296447 Jy ! Component: 2400 - total flux cleaned = -0.0030481 Jy ! Component: 2450 - total flux cleaned = -0.00308118 Jy ! Component: 2500 - total flux cleaned = -0.0031466 Jy ! Component: 2550 - total flux cleaned = -0.00321142 Jy ! Component: 2600 - total flux cleaned = -0.00319541 Jy ! Component: 2650 - total flux cleaned = -0.00327504 Jy ! Component: 2700 - total flux cleaned = -0.00335378 Jy ! Component: 2750 - total flux cleaned = -0.00336909 Jy ! Component: 2800 - total flux cleaned = -0.00341519 Jy ! Component: 2850 - total flux cleaned = -0.00341509 Jy ! Component: 2900 - total flux cleaned = -0.00343018 Jy ! Component: 2950 - total flux cleaned = -0.0035054 Jy ! Component: 3000 - total flux cleaned = -0.00353516 Jy ! Component: 3050 - total flux cleaned = -0.00350584 Jy ! Component: 3100 - total flux cleaned = -0.00357906 Jy ! Component: 3150 - total flux cleaned = -0.00368059 Jy ! Component: 3200 - total flux cleaned = -0.00373807 Jy ! Component: 3250 - total flux cleaned = -0.00380943 Jy ! Component: 3300 - total flux cleaned = -0.00386612 Jy ! Component: 3350 - total flux cleaned = -0.00392253 Jy ! Component: 3400 - total flux cleaned = -0.00402033 Jy ! Component: 3450 - total flux cleaned = -0.00407562 Jy ! Component: 3500 - total flux cleaned = -0.00415834 Jy ! Component: 3550 - total flux cleaned = -0.00421281 Jy ! Component: 3600 - total flux cleaned = -0.00425357 Jy ! Component: 3650 - total flux cleaned = -0.00436156 Jy ! Component: 3700 - total flux cleaned = -0.00441507 Jy ! Component: 3750 - total flux cleaned = -0.00442848 Jy ! Component: 3800 - total flux cleaned = -0.00452128 Jy ! Component: 3850 - total flux cleaned = -0.0045872 Jy ! Component: 3900 - total flux cleaned = -0.00461326 Jy ! Component: 3950 - total flux cleaned = -0.00466542 Jy ! Component: 4000 - total flux cleaned = -0.00471726 Jy ! Component: 4050 - total flux cleaned = -0.00478164 Jy ! Total flux subtracted in 4096 components = -0.00483279 Jy ! Clean residual min=-0.000753 max=0.000781 Jy/beam ! Clean residual mean=-0.000003 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.159791 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 364 components and 0.159791 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0650-2849_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.19 x 15.2 at -24.22 degrees (North through East) ! Clean map min=-0.002153 max=0.14441 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0650-2849_S_b_map.fits wmodel /vlbi/uf001/uva//J0650-2849_S_b_map.mod ! Writing 364 model components to file: /vlbi/uf001/uva//J0650-2849_S_b_map.mod wobs /vlbi/uf001/uva//J0650-2849_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0650-2849_S_b_uvs.fits wwins /vlbi/uf001/uva//J0650-2849_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0650-2849_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.144408 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240069 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.498732 0.498732 0.997465 1.99493 3.98986 7.97972 15.9594 31.9189 63.8378 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.144 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 601.524 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0650-2849_S_b_dfm.log closed on Sun Jan 13 23:12:11 2019