! Started logfile: /vlbi/uf001/uva//J0650-0840_X_dfm.log on Sun Jan 13 23:11:55 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0650-0840_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0650-0840_X_uva.fits
! AN table 1: 72 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.921682 visibilities/baseline/integration-bin.
! Found source: J0650-0840
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28668 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0650-0840_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003295Jy  sigma=22.136902
! Fit after  self-cal, rms=0.933029Jy  sigma=20.581684
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6523 mas, bmaj=1.697 mas, bpa=-0.3998 degrees
! Estimated noise=0.35135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0501163 Jy
! Component: 100  -  total flux cleaned = 0.062791 Jy
! Total flux subtracted in 100 components = 0.062791 Jy
! Clean residual min=-0.006457 max=0.026389 Jy/beam
! Clean residual mean=-0.000003 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 0.062791 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.062791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069124Jy  sigma=1.465216
! Fit after  self-cal, rms=0.068421Jy  sigma=1.448818
! Inverting map 
! Added new window around map position (3.4, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021806 Jy
! Component: 100  -  total flux cleaned = 0.0308381 Jy
! Total flux subtracted in 100 components = 0.0308381 Jy
! Clean residual min=-0.003408 max=0.004699 Jy/beam
! Clean residual mean=-0.000002 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.0936291 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.0936291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060855Jy  sigma=1.280863
! Fit after  self-cal, rms=0.059896Jy  sigma=1.260824
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00757348 Jy
! Component: 100  -  total flux cleaned = 0.0119969 Jy
! Total flux subtracted in 100 components = 0.0119969 Jy
! Clean residual min=-0.002983 max=0.003220 Jy/beam
! Clean residual mean=-0.000002 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.105626 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.105626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058600Jy  sigma=1.232224
! Fit after  self-cal, rms=0.058555Jy  sigma=1.231164
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8307 mas, bmaj=2.032 mas, bpa=0.4632 degrees
! Estimated noise=0.191454 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00518147 Jy
! Component: 100  -  total flux cleaned = 0.0084299 Jy
! Component: 150  -  total flux cleaned = 0.0105807 Jy
! Component: 200  -  total flux cleaned = 0.0120454 Jy
! Total flux subtracted in 200 components = 0.0120454 Jy
! Clean residual min=-0.002705 max=0.003308 Jy/beam
! Clean residual mean=-0.000013 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.117671 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.117671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058029Jy  sigma=1.219833
! Fit after  self-cal, rms=0.058024Jy  sigma=1.219537
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8307 x 2.032 at 0.4632 degrees (North through East)
! Clean map  min=-0.0025986  max=0.071763 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.93     KP        0.97     LA        0.97     
!   MK        1.03     NL        1.09     OV        0.86     PT        0.98     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.93     KP        0.94     LA        0.96     
!   MK        1.03     NL        1.14     OV        0.87     PT        1.04     
!   SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        0.93     KP        0.93     LA        0.94     
!   MK        1.02     NL        1.12     OV        0.86     PT        0.99     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.93     KP        1.00     LA        0.97     
!   MK        1.05     NL        1.12     OV        0.90     PT        1.01     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.94     KP        0.94     LA        0.97     
!   MK        1.00     NL        1.12     OV        0.88     PT        1.04     
!   SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        0.95     KP        0.98     LA        0.99     
!   MK        1.05     NL        1.13     OV        0.89     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.97     KP        0.91     LA        0.99     
!   MK        1.08     NL        1.10     OV        0.91     PT        1.03     
!   SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        0.94     KP        0.99     LA        0.98     
!   MK        1.07     NL        1.17     OV        0.89     PT        1.05     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.98     KP        0.98     LA        0.97     
!   MK        1.00     NL        1.13     OV        0.92     PT        1.07     
!   SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        0.96     KP        0.97     LA        0.97     
!   MK        1.06     NL        1.14     OV        0.87     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        0.95     KP        0.98     LA        0.98     
!   MK        1.01     NL        1.17     OV        0.89     PT        1.00     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.95     KP        0.95     LA        1.01     
!   MK        1.13     NL        1.12     OV        0.92     PT        0.99     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.058024Jy  sigma=1.219537
! Fit after  self-cal, rms=0.056663Jy  sigma=1.208917
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8333 mas, bmaj=2.049 mas, bpa=1.13 degrees
! Estimated noise=0.188477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205419 Jy
! Component: 100  -  total flux cleaned = 0.00020671 Jy
! Component: 150  -  total flux cleaned = 0.000227861 Jy
! Component: 200  -  total flux cleaned = 0.00022782 Jy
! Total flux subtracted in 200 components = 0.00022782 Jy
! Clean residual min=-0.002355 max=0.002161 Jy/beam
! Clean residual mean=-0.000015 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.117899 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.117899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056639Jy  sigma=1.208376
! Fit after  self-cal, rms=0.056678Jy  sigma=1.207971
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056678Jy  sigma=1.207971
! Fit after  self-cal, rms=0.056802Jy  sigma=1.203552
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8352 mas, bmaj=2.053 mas, bpa=1.231 degrees
! Estimated noise=0.188405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137506 Jy
! Component: 100  -  total flux cleaned = -0.000212634 Jy
! Component: 150  -  total flux cleaned = -0.000213202 Jy
! Component: 200  -  total flux cleaned = -0.000213682 Jy
! Total flux subtracted in 200 components = -0.000213682 Jy
! Clean residual min=-0.001824 max=0.001764 Jy/beam
! Clean residual mean=-0.000013 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.117686 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.117686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056791Jy  sigma=1.203343
! Fit after  self-cal, rms=0.056805Jy  sigma=1.203238
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.24203e-07 Jy
! Component: 100  -  total flux cleaned = -6.82076e-09 Jy
! Component: 150  -  total flux cleaned = 1.2465e-05 Jy
! Component: 200  -  total flux cleaned = 1.25214e-05 Jy
! Total flux subtracted in 200 components = 1.25214e-05 Jy
! Clean residual min=-0.001829 max=0.001757 Jy/beam
! Clean residual mean=-0.000013 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.117698 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.117698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056799Jy  sigma=1.203130
! Fit after  self-cal, rms=0.056800Jy  sigma=1.203130
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056800Jy  sigma=1.203130
! Fit after  self-cal, rms=0.057129Jy  sigma=1.192721
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8361 mas, bmaj=2.054 mas, bpa=1.223 degrees
! Estimated noise=0.187967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.77761e-05 Jy
! Component: 100  -  total flux cleaned = 9.78852e-05 Jy
! Component: 150  -  total flux cleaned = 0.000146804 Jy
! Component: 200  -  total flux cleaned = 0.000168104 Jy
! Total flux subtracted in 200 components = 0.000168104 Jy
! Clean residual min=-0.001120 max=0.001060 Jy/beam
! Clean residual mean=-0.000002 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.117866 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 54 components and 0.117866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057121Jy  sigma=1.192550
! Fit after  self-cal, rms=0.057166Jy  sigma=1.192250
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.32827e-05 Jy
! Component: 100  -  total flux cleaned = 3.35289e-05 Jy
! Component: 150  -  total flux cleaned = 4.32994e-05 Jy
! Component: 200  -  total flux cleaned = 5.26906e-05 Jy
! Total flux subtracted in 200 components = 5.26906e-05 Jy
! Clean residual min=-0.001145 max=0.001055 Jy/beam
! Clean residual mean=-0.000002 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.117919 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.117919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057163Jy  sigma=1.192182
! Fit after  self-cal, rms=0.057163Jy  sigma=1.192184
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057163Jy  sigma=1.192184
! Fit after  self-cal, rms=0.057220Jy  sigma=1.192155
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.058 mas, bmaj=3.805 mas, bpa=0.53 degrees
! Estimated noise=0.242585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505494 Jy
! Component: 100  -  total flux cleaned = 0.000770399 Jy
! Component: 150  -  total flux cleaned = 0.000819048 Jy
! Component: 200  -  total flux cleaned = 0.000812816 Jy
! Total flux subtracted in 200 components = 0.000812816 Jy
! Clean residual min=-0.001047 max=0.001047 Jy/beam
! Clean residual mean=-0.000003 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.118732 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 59 components and 0.118732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057219Jy  sigma=1.192152
! Fit after  self-cal, rms=0.057222Jy  sigma=1.192144
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.82177e-05 Jy
! Component: 100  -  total flux cleaned = 2.60572e-05 Jy
! Component: 150  -  total flux cleaned = 1.47312e-05 Jy
! Component: 200  -  total flux cleaned = 9.2033e-06 Jy
! Total flux subtracted in 200 components = 9.2033e-06 Jy
! Clean residual min=-0.001041 max=0.001052 Jy/beam
! Clean residual mean=-0.000003 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.118741 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 60 components and 0.118741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057221Jy  sigma=1.192146
! Fit after  self-cal, rms=0.057221Jy  sigma=1.192145
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.836 mas, bmaj=2.055 mas, bpa=1.192 degrees
! Estimated noise=0.187944 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.836 x 2.055 at 1.192 degrees (North through East)
! Clean map  min=-0.00099063  max=0.070834 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6568 mas, bmaj=1.714 mas, bpa=0.3677 degrees
! Estimated noise=0.348339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0526372 Jy
! Component: 100  -  total flux cleaned = 0.0763235 Jy
! Component: 150  -  total flux cleaned = 0.0898121 Jy
! Component: 200  -  total flux cleaned = 0.0983457 Jy
! Total flux subtracted in 200 components = 0.0983457 Jy
! Clean residual min=-0.002434 max=0.004511 Jy/beam
! Clean residual mean=-0.000001 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.0983457 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0983457 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.836 mas, bmaj=2.055 mas, bpa=1.192 degrees
! Estimated noise=0.187944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00745215 Jy
! Component: 100  -  total flux cleaned = 0.0119513 Jy
! Component: 150  -  total flux cleaned = 0.0147268 Jy
! Component: 200  -  total flux cleaned = 0.0164876 Jy
! Total flux subtracted in 200 components = 0.0164876 Jy
! Clean residual min=-0.001217 max=0.001231 Jy/beam
! Clean residual mean=-0.000002 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.114833 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.114833 Jy
! Inverting map 
! Added new window around map position (-0.8, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129487 Jy
! Component: 100  -  total flux cleaned = 0.0019777 Jy
! Component: 150  -  total flux cleaned = 0.0024288 Jy
! Component: 200  -  total flux cleaned = 0.00267724 Jy
! Total flux subtracted in 200 components = 0.00267724 Jy
! Clean residual min=-0.001107 max=0.000956 Jy/beam
! Clean residual mean=-0.000002 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.117511 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 31 components and 0.117511 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.058 mas, bmaj=3.805 mas, bpa=0.53 degrees
! Estimated noise=0.242585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000877898 Jy
! Component: 100  -  total flux cleaned = 0.00119147 Jy
! Component: 150  -  total flux cleaned = 0.00123226 Jy
! Component: 200  -  total flux cleaned = 0.00125671 Jy
! Total flux subtracted in 200 components = 0.00125671 Jy
! Clean residual min=-0.001006 max=0.001069 Jy/beam
! Clean residual mean=-0.000004 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.118767 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.25681e-05 Jy
! Component: 100  -  total flux cleaned = 4.40818e-05 Jy
! Component: 150  -  total flux cleaned = 6.43854e-05 Jy
! Component: 200  -  total flux cleaned = 8.30622e-05 Jy
! Total flux subtracted in 200 components = 8.30622e-05 Jy
! Clean residual min=-0.001009 max=0.001030 Jy/beam
! Clean residual mean=-0.000004 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.11885 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.11885 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.836 mas, bmaj=2.055 mas, bpa=1.192 degrees
! Estimated noise=0.187944 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.17484e-05 Jy
! Component: 100  -  total flux cleaned = -0.000226005 Jy
! Component: 150  -  total flux cleaned = -0.000257985 Jy
! Component: 200  -  total flux cleaned = -0.000243111 Jy
! Total flux subtracted in 200 components = -0.000243111 Jy
! Clean residual min=-0.001088 max=0.000948 Jy/beam
! Clean residual mean=-0.000002 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.118607 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 0.118607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057192Jy  sigma=1.191621
! Fit after  self-cal, rms=0.057185Jy  sigma=1.191565
wmodel J0650-0840_X_map.mod
! Writing 60 model components to file: J0650-0840_X_map.mod
wobs   J0650-0840_X_uvs.fits
! Writing UV FITS file: J0650-0840_X_uvs.fits
wwins  J0650-0840_X_map.win
! wwins: Wrote 3 windows to J0650-0840_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287085 Jy
! Component: 100  -  total flux cleaned = -0.000456842 Jy
! Component: 150  -  total flux cleaned = -0.000504798 Jy
! Component: 200  -  total flux cleaned = -0.000595485 Jy
! Component: 250  -  total flux cleaned = -0.000624801 Jy
! Component: 300  -  total flux cleaned = -0.000667738 Jy
! Component: 350  -  total flux cleaned = -0.000737074 Jy
! Component: 400  -  total flux cleaned = -0.000737095 Jy
! Component: 450  -  total flux cleaned = -0.000776874 Jy
! Component: 500  -  total flux cleaned = -0.000750837 Jy
! Component: 550  -  total flux cleaned = -0.000776166 Jy
! Component: 600  -  total flux cleaned = -0.000713322 Jy
! Component: 650  -  total flux cleaned = -0.000700866 Jy
! Component: 700  -  total flux cleaned = -0.000712815 Jy
! Component: 750  -  total flux cleaned = -0.000676774 Jy
! Component: 800  -  total flux cleaned = -0.00066503 Jy
! Component: 850  -  total flux cleaned = -0.000606772 Jy
! Component: 900  -  total flux cleaned = -0.000653051 Jy
! Component: 950  -  total flux cleaned = -0.000584378 Jy
! Component: 1000  -  total flux cleaned = -0.000505456 Jy
! Component: 1050  -  total flux cleaned = -0.000494572 Jy
! Component: 1100  -  total flux cleaned = -0.000450337 Jy
! Component: 1150  -  total flux cleaned = -0.000439361 Jy
! Component: 1200  -  total flux cleaned = -0.000396059 Jy
! Component: 1250  -  total flux cleaned = -0.000342735 Jy
! Component: 1300  -  total flux cleaned = -0.000321466 Jy
! Component: 1350  -  total flux cleaned = -0.000290244 Jy
! Component: 1400  -  total flux cleaned = -0.000259083 Jy
! Component: 1450  -  total flux cleaned = -0.000208022 Jy
! Component: 1500  -  total flux cleaned = -0.000146906 Jy
! Component: 1550  -  total flux cleaned = -0.000156894 Jy
! Component: 1600  -  total flux cleaned = -8.69717e-05 Jy
! Component: 1650  -  total flux cleaned = -0.000116658 Jy
! Component: 1700  -  total flux cleaned = -7.7344e-05 Jy
! Component: 1750  -  total flux cleaned = -5.78413e-05 Jy
! Component: 1800  -  total flux cleaned = -8.67089e-05 Jy
! Component: 1850  -  total flux cleaned = -1.94976e-05 Jy
! Component: 1900  -  total flux cleaned = -1.93767e-05 Jy
! Component: 1950  -  total flux cleaned = -3.82164e-05 Jy
! Component: 2000  -  total flux cleaned = -1.94392e-05 Jy
! Component: 2050  -  total flux cleaned = -1.94478e-05 Jy
! Component: 2100  -  total flux cleaned = -9.85889e-07 Jy
! Component: 2150  -  total flux cleaned = -1.01612e-05 Jy
! Component: 2200  -  total flux cleaned = 7.99069e-06 Jy
! Component: 2250  -  total flux cleaned = -9.98204e-06 Jy
! Component: 2300  -  total flux cleaned = -9.99402e-06 Jy
! Component: 2350  -  total flux cleaned = 1.66438e-05 Jy
! Component: 2400  -  total flux cleaned = 7.78907e-06 Jy
! Component: 2450  -  total flux cleaned = -9.74512e-06 Jy
! Component: 2500  -  total flux cleaned = 7.59414e-06 Jy
! Component: 2550  -  total flux cleaned = 1.62676e-05 Jy
! Component: 2600  -  total flux cleaned = -9.46376e-07 Jy
! Component: 2650  -  total flux cleaned = 1.61322e-05 Jy
! Component: 2700  -  total flux cleaned = 7.76657e-06 Jy
! Component: 2750  -  total flux cleaned = 7.53082e-05 Jy
! Component: 2800  -  total flux cleaned = 3.33728e-05 Jy
! Component: 2850  -  total flux cleaned = 5.01918e-05 Jy
! Component: 2900  -  total flux cleaned = 5.85276e-05 Jy
! Component: 2950  -  total flux cleaned = 5.0295e-05 Jy
! Component: 3000  -  total flux cleaned = 8.29789e-05 Jy
! Component: 3050  -  total flux cleaned = 7.4843e-05 Jy
! Component: 3100  -  total flux cleaned = 6.6812e-05 Jy
! Component: 3150  -  total flux cleaned = 0.00011499 Jy
! Component: 3200  -  total flux cleaned = 9.10783e-05 Jy
! Component: 3250  -  total flux cleaned = 0.000138718 Jy
! Component: 3300  -  total flux cleaned = 9.92662e-05 Jy
! Component: 3350  -  total flux cleaned = 0.000107079 Jy
! Component: 3400  -  total flux cleaned = 0.000122631 Jy
! Component: 3450  -  total flux cleaned = 0.000107018 Jy
! Component: 3500  -  total flux cleaned = 0.000106988 Jy
! Component: 3550  -  total flux cleaned = 0.000106934 Jy
! Component: 3600  -  total flux cleaned = 0.000106907 Jy
! Component: 3650  -  total flux cleaned = 8.42094e-05 Jy
! Component: 3700  -  total flux cleaned = 0.000114407 Jy
! Component: 3750  -  total flux cleaned = 9.18472e-05 Jy
! Component: 3800  -  total flux cleaned = 4.70341e-05 Jy
! Component: 3850  -  total flux cleaned = 3.96027e-05 Jy
! Component: 3900  -  total flux cleaned = 6.18181e-05 Jy
! Component: 3950  -  total flux cleaned = 8.38424e-05 Jy
! Component: 4000  -  total flux cleaned = 9.12105e-05 Jy
! Component: 4050  -  total flux cleaned = 5.49301e-05 Jy
! Total flux subtracted in 4096 components = 6.93673e-05 Jy
! Clean residual min=-0.000398 max=0.000533 Jy/beam
! Clean residual mean=-0.000000 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.118677 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 366 components and 0.118677 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0650-0840_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.836 x 2.055 at 1.192 degrees (North through East)
! Clean map  min=-0.0007302  max=0.070724 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0650-0840_X_map.fits
wmodel /vlbi/uf001/uva//J0650-0840_X_map.mod
! Writing 366 model components to file: /vlbi/uf001/uva//J0650-0840_X_map.mod
wobs   /vlbi/uf001/uva//J0650-0840_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0650-0840_X_uvs.fits
wwins  /vlbi/uf001/uva//J0650-0840_X_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0650-0840_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0707243 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000125223 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.531176 0.531176 1.06235 2.12471 4.24941 8.49882 16.9976 33.9953 67.9906
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  564.784 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0650-0840_X_dfm.log closed on Sun Jan 13 23:12:00 2019