! Started logfile: /vlbi/uf001/uva//J0650-0840_S_dfm.log on Sun Jan 13 23:11:50 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0650-0840_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0650-0840_S_uva.fits
! AN table 1: 72 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.921682 visibilities/baseline/integration-bin.
! Found source: J0650-0840
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7167 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0650-0840_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026939Jy  sigma=17.914183
! Fit after  self-cal, rms=0.791629Jy  sigma=13.968412
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.545 mas, bmaj=6.771 mas, bpa=-1.405 degrees
! Estimated noise=0.689562 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15318 Jy
! Component: 100  -  total flux cleaned = 0.19234 Jy
! Total flux subtracted in 100 components = 0.19234 Jy
! Clean residual min=-0.008854 max=0.031958 Jy/beam
! Clean residual mean=0.000026 rms=0.002873 Jy/beam
! Combined flux in latest and established models = 0.19234 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.19234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091468Jy  sigma=1.497981
! Fit after  self-cal, rms=0.091342Jy  sigma=1.495970
! Inverting map 
! Added new window around map position (3.5, -2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0292531 Jy
! Component: 100  -  total flux cleaned = 0.0446703 Jy
! Total flux subtracted in 100 components = 0.0446703 Jy
! Clean residual min=-0.006276 max=0.008518 Jy/beam
! Clean residual mean=0.000020 rms=0.001583 Jy/beam
! Combined flux in latest and established models = 0.23701 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.23701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078435Jy  sigma=1.270359
! Fit after  self-cal, rms=0.078017Jy  sigma=1.262323
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111686 Jy
! Component: 100  -  total flux cleaned = 0.0181261 Jy
! Total flux subtracted in 100 components = 0.0181261 Jy
! Clean residual min=-0.004990 max=0.005523 Jy/beam
! Clean residual mean=0.000018 rms=0.001235 Jy/beam
! Combined flux in latest and established models = 0.255136 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.255136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075422Jy  sigma=1.220449
! Fit after  self-cal, rms=0.075347Jy  sigma=1.218870
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.062 mas, bmaj=7.774 mas, bpa=-0.8156 degrees
! Estimated noise=0.485456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00808713 Jy
! Component: 100  -  total flux cleaned = 0.0125969 Jy
! Component: 150  -  total flux cleaned = 0.0152415 Jy
! Component: 200  -  total flux cleaned = 0.0163836 Jy
! Total flux subtracted in 200 components = 0.0163836 Jy
! Clean residual min=-0.004206 max=0.004099 Jy/beam
! Clean residual mean=0.000027 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.27152 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 45 components and 0.27152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074310Jy  sigma=1.204916
! Fit after  self-cal, rms=0.074268Jy  sigma=1.204166
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.062 x 7.774 at -0.8156 degrees (North through East)
! Clean map  min=-0.0040507  max=0.20527 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.99     KP        1.00     LA        0.96     
!   MK        0.99     NL        1.03     OV        0.97     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.01     KP        1.00     LA        0.96     
!   MK        1.01     NL        1.07     OV        0.95     PT        1.02     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        1.00     KP        0.99     LA        0.96     
!   MK        1.00     NL        1.06     OV        0.97     PT        1.03     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.074268Jy  sigma=1.204166
! Fit after  self-cal, rms=0.073531Jy  sigma=1.194715
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.064 mas, bmaj=7.79 mas, bpa=-0.7483 degrees
! Estimated noise=0.484904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000142569 Jy
! Component: 100  -  total flux cleaned = 5.45698e-05 Jy
! Component: 150  -  total flux cleaned = -2.13367e-05 Jy
! Component: 200  -  total flux cleaned = -8.94238e-05 Jy
! Total flux subtracted in 200 components = -8.94238e-05 Jy
! Clean residual min=-0.003821 max=0.003657 Jy/beam
! Clean residual mean=0.000019 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 0.27143 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.27143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073488Jy  sigma=1.193894
! Fit after  self-cal, rms=0.073477Jy  sigma=1.193795
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073477Jy  sigma=1.193795
! Fit after  self-cal, rms=0.072927Jy  sigma=1.185883
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.067 mas, bmaj=7.793 mas, bpa=-0.7418 degrees
! Estimated noise=0.484774 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.74323e-05 Jy
! Component: 100  -  total flux cleaned = -0.000174086 Jy
! Component: 150  -  total flux cleaned = -0.000230784 Jy
! Component: 200  -  total flux cleaned = -0.00028226 Jy
! Total flux subtracted in 200 components = -0.00028226 Jy
! Clean residual min=-0.003488 max=0.003201 Jy/beam
! Clean residual mean=0.000014 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.271148 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 64 components and 0.271148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072904Jy  sigma=1.185450
! Fit after  self-cal, rms=0.072899Jy  sigma=1.185397
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.84762e-05 Jy
! Component: 100  -  total flux cleaned = -9.63636e-05 Jy
! Component: 150  -  total flux cleaned = -0.000162864 Jy
! Component: 200  -  total flux cleaned = -0.000203884 Jy
! Total flux subtracted in 200 components = -0.000203884 Jy
! Clean residual min=-0.003454 max=0.003195 Jy/beam
! Clean residual mean=0.000014 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.270944 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 66 components and 0.270944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072885Jy  sigma=1.185168
! Fit after  self-cal, rms=0.072885Jy  sigma=1.185154
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072885Jy  sigma=1.185154
! Fit after  self-cal, rms=0.071277Jy  sigma=1.152318
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=7.797 mas, bpa=-0.7673 degrees
! Estimated noise=0.484635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025134 Jy
! Component: 100  -  total flux cleaned = 0.000226212 Jy
! Component: 150  -  total flux cleaned = 0.000205118 Jy
! Component: 200  -  total flux cleaned = 0.000187373 Jy
! Total flux subtracted in 200 components = 0.000187373 Jy
! Clean residual min=-0.002369 max=0.001824 Jy/beam
! Clean residual mean=0.000004 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.271131 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 76 components and 0.271131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071261Jy  sigma=1.152105
! Fit after  self-cal, rms=0.071283Jy  sigma=1.151942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.78957e-06 Jy
! Component: 100  -  total flux cleaned = -6.36367e-06 Jy
! Component: 150  -  total flux cleaned = -3.72728e-05 Jy
! Component: 200  -  total flux cleaned = -6.61526e-05 Jy
! Total flux subtracted in 200 components = -6.61526e-05 Jy
! Clean residual min=-0.002371 max=0.001825 Jy/beam
! Clean residual mean=0.000004 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.271065 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 81 components and 0.271065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071276Jy  sigma=1.151832
! Fit after  self-cal, rms=0.071275Jy  sigma=1.151819
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071275Jy  sigma=1.151819
! Fit after  self-cal, rms=0.071284Jy  sigma=1.151798
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.926 mas, bmaj=13.57 mas, bpa=-0.5384 degrees
! Estimated noise=0.64677 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.31057e-05 Jy
! Component: 100  -  total flux cleaned = 9.0991e-05 Jy
! Component: 150  -  total flux cleaned = 0.000110974 Jy
! Component: 200  -  total flux cleaned = 0.000135332 Jy
! Total flux subtracted in 200 components = 0.000135332 Jy
! Clean residual min=-0.002316 max=0.001813 Jy/beam
! Clean residual mean=0.000008 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.271201 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 88 components and 0.271201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071284Jy  sigma=1.151806
! Fit after  self-cal, rms=0.071282Jy  sigma=1.151790
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.51768e-05 Jy
! Component: 100  -  total flux cleaned = 2.56936e-06 Jy
! Component: 150  -  total flux cleaned = 1.62099e-05 Jy
! Component: 200  -  total flux cleaned = 3.28064e-05 Jy
! Total flux subtracted in 200 components = 3.28064e-05 Jy
! Clean residual min=-0.002308 max=0.001812 Jy/beam
! Clean residual mean=0.000008 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.271234 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 97 components and 0.271234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071283Jy  sigma=1.151814
! Fit after  self-cal, rms=0.071281Jy  sigma=1.151802
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=7.8 mas, bpa=-0.8033 degrees
! Estimated noise=0.484552 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.07 x 7.8 at -0.8033 degrees (North through East)
! Clean map  min=-0.00226  max=0.2049 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.55 mas, bmaj=6.779 mas, bpa=-1.376 degrees
! Estimated noise=0.689735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153046 Jy
! Component: 100  -  total flux cleaned = 0.198985 Jy
! Component: 150  -  total flux cleaned = 0.223662 Jy
! Component: 200  -  total flux cleaned = 0.238649 Jy
! Total flux subtracted in 200 components = 0.238649 Jy
! Clean residual min=-0.004481 max=0.007979 Jy/beam
! Clean residual mean=0.000008 rms=0.001150 Jy/beam
! Combined flux in latest and established models = 0.238649 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.238649 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=7.8 mas, bpa=-0.8033 degrees
! Estimated noise=0.484552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140671 Jy
! Component: 100  -  total flux cleaned = 0.0216314 Jy
! Component: 150  -  total flux cleaned = 0.0260352 Jy
! Component: 200  -  total flux cleaned = 0.0287137 Jy
! Total flux subtracted in 200 components = 0.0287137 Jy
! Clean residual min=-0.002590 max=0.002116 Jy/beam
! Clean residual mean=0.000006 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.267363 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 47 components and 0.267363 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.926 mas, bmaj=13.57 mas, bpa=-0.5384 degrees
! Estimated noise=0.64677 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00239242 Jy
! Component: 100  -  total flux cleaned = 0.00339699 Jy
! Component: 150  -  total flux cleaned = 0.00384565 Jy
! Component: 200  -  total flux cleaned = 0.00386681 Jy
! Total flux subtracted in 200 components = 0.00386681 Jy
! Clean residual min=-0.002368 max=0.001858 Jy/beam
! Clean residual mean=0.000009 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.271229 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.9149e-07 Jy
! Component: 100  -  total flux cleaned = -9.67945e-07 Jy
! Component: 150  -  total flux cleaned = -1.50057e-06 Jy
! Component: 200  -  total flux cleaned = -1.86008e-06 Jy
! Total flux subtracted in 200 components = -1.86008e-06 Jy
! Clean residual min=-0.002360 max=0.001847 Jy/beam
! Clean residual mean=0.000009 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.271228 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 0.271228 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=7.8 mas, bpa=-0.8033 degrees
! Estimated noise=0.484552 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000211351 Jy
! Component: 100  -  total flux cleaned = -0.000248022 Jy
! Component: 150  -  total flux cleaned = -0.000246434 Jy
! Component: 200  -  total flux cleaned = -0.000276202 Jy
! Total flux subtracted in 200 components = -0.000276202 Jy
! Clean residual min=-0.002409 max=0.001820 Jy/beam
! Clean residual mean=0.000004 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.270951 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 71 components and 0.270951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071290Jy  sigma=1.152128
! Fit after  self-cal, rms=0.071287Jy  sigma=1.152020
wmodel J0650-0840_S_map.mod
! Writing 71 model components to file: J0650-0840_S_map.mod
wobs   J0650-0840_S_uvs.fits
! Writing UV FITS file: J0650-0840_S_uvs.fits
wwins  J0650-0840_S_map.win
! wwins: Wrote 2 windows to J0650-0840_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000931095 Jy
! Component: 100  -  total flux cleaned = -0.00107085 Jy
! Component: 150  -  total flux cleaned = -0.00107044 Jy
! Component: 200  -  total flux cleaned = -0.00122662 Jy
! Component: 250  -  total flux cleaned = -0.00137857 Jy
! Component: 300  -  total flux cleaned = -0.00149692 Jy
! Component: 350  -  total flux cleaned = -0.00158375 Jy
! Component: 400  -  total flux cleaned = -0.0016963 Jy
! Component: 450  -  total flux cleaned = -0.00175164 Jy
! Component: 500  -  total flux cleaned = -0.00183276 Jy
! Component: 550  -  total flux cleaned = -0.00196475 Jy
! Component: 600  -  total flux cleaned = -0.00199021 Jy
! Component: 650  -  total flux cleaned = -0.00201598 Jy
! Component: 700  -  total flux cleaned = -0.00206641 Jy
! Component: 750  -  total flux cleaned = -0.00206707 Jy
! Component: 800  -  total flux cleaned = -0.00206766 Jy
! Component: 850  -  total flux cleaned = -0.00197302 Jy
! Component: 900  -  total flux cleaned = -0.00190335 Jy
! Component: 950  -  total flux cleaned = -0.0017656 Jy
! Component: 1000  -  total flux cleaned = -0.00160776 Jy
! Component: 1050  -  total flux cleaned = -0.00156345 Jy
! Component: 1100  -  total flux cleaned = -0.00147589 Jy
! Component: 1150  -  total flux cleaned = -0.00136826 Jy
! Component: 1200  -  total flux cleaned = -0.00132575 Jy
! Component: 1250  -  total flux cleaned = -0.00124173 Jy
! Component: 1300  -  total flux cleaned = -0.00115927 Jy
! Component: 1350  -  total flux cleaned = -0.00111838 Jy
! Component: 1400  -  total flux cleaned = -0.000957738 Jy
! Component: 1450  -  total flux cleaned = -0.00091861 Jy
! Component: 1500  -  total flux cleaned = -0.000860481 Jy
! Component: 1550  -  total flux cleaned = -0.000783857 Jy
! Component: 1600  -  total flux cleaned = -0.000689111 Jy
! Component: 1650  -  total flux cleaned = -0.000651737 Jy
! Component: 1700  -  total flux cleaned = -0.00055924 Jy
! Component: 1750  -  total flux cleaned = -0.000504612 Jy
! Component: 1800  -  total flux cleaned = -0.000414258 Jy
! Component: 1850  -  total flux cleaned = -0.000360418 Jy
! Component: 1900  -  total flux cleaned = -0.000219909 Jy
! Component: 1950  -  total flux cleaned = -0.000185441 Jy
! Component: 2000  -  total flux cleaned = -0.000151366 Jy
! Component: 2050  -  total flux cleaned = -0.000134117 Jy
! Component: 2100  -  total flux cleaned = -3.3311e-05 Jy
! Component: 2150  -  total flux cleaned = -6.64548e-05 Jy
! Component: 2200  -  total flux cleaned = -3.31998e-05 Jy
! Component: 2250  -  total flux cleaned = 4.80001e-05 Jy
! Component: 2300  -  total flux cleaned = -1.62714e-05 Jy
! Component: 2350  -  total flux cleaned = 1.55183e-05 Jy
! Component: 2400  -  total flux cleaned = 4.7126e-05 Jy
! Component: 2450  -  total flux cleaned = 6.25571e-05 Jy
! Component: 2500  -  total flux cleaned = 4.68672e-05 Jy
! Component: 2550  -  total flux cleaned = 9.26687e-05 Jy
! Component: 2600  -  total flux cleaned = 0.000153087 Jy
! Component: 2650  -  total flux cleaned = 0.000108206 Jy
! Component: 2700  -  total flux cleaned = 0.000167727 Jy
! Component: 2750  -  total flux cleaned = 0.000197076 Jy
! Component: 2800  -  total flux cleaned = 0.000226317 Jy
! Component: 2850  -  total flux cleaned = 0.000269569 Jy
! Component: 2900  -  total flux cleaned = 0.000312432 Jy
! Component: 2950  -  total flux cleaned = 0.000369097 Jy
! Component: 3000  -  total flux cleaned = 0.000383261 Jy
! Component: 3050  -  total flux cleaned = 0.00046667 Jy
! Component: 3100  -  total flux cleaned = 0.000452734 Jy
! Component: 3150  -  total flux cleaned = 0.000507618 Jy
! Component: 3200  -  total flux cleaned = 0.000548118 Jy
! Component: 3250  -  total flux cleaned = 0.000548214 Jy
! Component: 3300  -  total flux cleaned = 0.000615006 Jy
! Component: 3350  -  total flux cleaned = 0.000641413 Jy
! Component: 3400  -  total flux cleaned = 0.000641438 Jy
! Component: 3450  -  total flux cleaned = 0.000641308 Jy
! Component: 3500  -  total flux cleaned = 0.000692982 Jy
! Component: 3550  -  total flux cleaned = 0.000705871 Jy
! Component: 3600  -  total flux cleaned = 0.000744054 Jy
! Component: 3650  -  total flux cleaned = 0.000744002 Jy
! Component: 3700  -  total flux cleaned = 0.000806504 Jy
! Component: 3750  -  total flux cleaned = 0.000855943 Jy
! Component: 3800  -  total flux cleaned = 0.00083125 Jy
! Component: 3850  -  total flux cleaned = 0.000892237 Jy
! Component: 3900  -  total flux cleaned = 0.000904316 Jy
! Component: 3950  -  total flux cleaned = 0.000856221 Jy
! Component: 4000  -  total flux cleaned = 0.000951887 Jy
! Component: 4050  -  total flux cleaned = 0.000951775 Jy
! Total flux subtracted in 4096 components = 0.000939875 Jy
! Clean residual min=-0.000601 max=0.000726 Jy/beam
! Clean residual mean=0.000003 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.271891 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 363 components and 0.271891 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0650-0840_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.07 x 7.8 at -0.8033 degrees (North through East)
! Clean map  min=-0.0015725  max=0.20541 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0650-0840_S_map.fits
wmodel /vlbi/uf001/uva//J0650-0840_S_map.mod
! Writing 363 model components to file: /vlbi/uf001/uva//J0650-0840_S_map.mod
wobs   /vlbi/uf001/uva//J0650-0840_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0650-0840_S_uvs.fits
wwins  /vlbi/uf001/uva//J0650-0840_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0650-0840_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.205409 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212884 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.310917 0.310917 0.621834 1.24367 2.48734 4.97467 9.94935 19.8987 39.7974 79.5948
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.205 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  964.887 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0650-0840_S_dfm.log closed on Sun Jan 13 23:11:54 2019