! Started logfile: /vlbi/uf001/uva//J0650-0152_X_dfm.log on Sun Jan 13 23:11:43 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0650-0152_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0650-0152_X_uva.fits
! AN table 1: 72 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.986111 visibilities/baseline/integration-bin.
! Found source: J0650-0152
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30672 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0650-0152_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011809Jy  sigma=22.465339
! Fit after  self-cal, rms=0.882332Jy  sigma=19.552115
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6356 mas, bmaj=1.61 mas, bpa=-2.624 degrees
! Estimated noise=0.351511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.09108 Jy
! Component: 100  -  total flux cleaned = 0.114242 Jy
! Total flux subtracted in 100 components = 0.114242 Jy
! Clean residual min=-0.005949 max=0.012991 Jy/beam
! Clean residual mean=-0.000007 rms=0.001299 Jy/beam
! Combined flux in latest and established models = 0.114242 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.114242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063836Jy  sigma=1.384145
! Fit after  self-cal, rms=0.063834Jy  sigma=1.383800
! Inverting map 
! Added new window around map position (-1, -6.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123933 Jy
! Component: 100  -  total flux cleaned = 0.0190248 Jy
! Total flux subtracted in 100 components = 0.0190248 Jy
! Clean residual min=-0.004718 max=0.009645 Jy/beam
! Clean residual mean=-0.000005 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.133267 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.133267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061614Jy  sigma=1.326329
! Fit after  self-cal, rms=0.061315Jy  sigma=1.319060
! Inverting map 
! Added new window around map position (0.8, 6.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0079056 Jy
! Component: 100  -  total flux cleaned = 0.0130785 Jy
! Total flux subtracted in 100 components = 0.0130785 Jy
! Clean residual min=-0.004094 max=0.004446 Jy/beam
! Clean residual mean=-0.000004 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.146346 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.146346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059849Jy  sigma=1.277730
! Fit after  self-cal, rms=0.059825Jy  sigma=1.277369
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8097 mas, bmaj=1.911 mas, bpa=-2.725 degrees
! Estimated noise=0.184336 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00766092 Jy
! Component: 100  -  total flux cleaned = 0.0125664 Jy
! Component: 150  -  total flux cleaned = 0.0152227 Jy
! Component: 200  -  total flux cleaned = 0.0165498 Jy
! Total flux subtracted in 200 components = 0.0165498 Jy
! Clean residual min=-0.004893 max=0.005264 Jy/beam
! Clean residual mean=-0.000009 rms=0.001172 Jy/beam
! Combined flux in latest and established models = 0.162895 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.162895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058793Jy  sigma=1.246231
! Fit after  self-cal, rms=0.058730Jy  sigma=1.244943
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8097 x 1.911 at -2.725 degrees (North through East)
! Clean map  min=-0.0042743  max=0.11112 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.04     KP        1.01     LA        0.97     
!   MK        0.99     NL        1.14     OV        0.89     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.04     KP        1.05     LA        0.96     
!   MK        1.02     NL        1.13     OV        0.87     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.03     KP        1.05     LA        0.97     
!   MK        1.03     NL        1.13     OV        0.88     PT        0.94     
!   SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.02     KP        1.03     LA        0.97     
!   MK        1.02     NL        1.15     OV        0.91     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.01     KP        1.01     LA        0.99     
!   MK        1.07     NL        1.17     OV        0.87     PT        0.98     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.01     KP        1.05     LA        0.97     
!   MK        1.02     NL        1.14     OV        0.89     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.05     KP        1.08     LA        0.99     
!   MK        1.03     NL        1.15     OV        0.89     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.03     KP        1.08     LA        0.98     
!   MK        1.07     NL        1.13     OV        0.90     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.04     KP        1.05     LA        0.97     
!   MK        1.07     NL        1.12     OV        0.91     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        1.06     KP        1.05     LA        0.98     
!   MK        1.05     NL        1.13     OV        0.88     PT        0.96     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.00     KP        1.06     LA        0.97     
!   MK        1.09     NL        1.12     OV        0.92     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.06     KP        1.01     LA        0.98     
!   MK        1.08     NL        1.14     OV        0.89     PT        0.94     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.058730Jy  sigma=1.244943
! Fit after  self-cal, rms=0.059220Jy  sigma=1.215449
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8147 mas, bmaj=1.924 mas, bpa=-1.933 degrees
! Estimated noise=0.187795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206359 Jy
! Component: 100  -  total flux cleaned = 0.00250775 Jy
! Component: 150  -  total flux cleaned = 0.00265129 Jy
! Component: 200  -  total flux cleaned = 0.00280816 Jy
! Total flux subtracted in 200 components = 0.00280816 Jy
! Clean residual min=-0.004000 max=0.003719 Jy/beam
! Clean residual mean=-0.000007 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.165703 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.165703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059068Jy  sigma=1.211766
! Fit after  self-cal, rms=0.059099Jy  sigma=1.210966
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059099Jy  sigma=1.210966
! Fit after  self-cal, rms=0.059251Jy  sigma=1.204551
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=1.925 mas, bpa=-1.867 degrees
! Estimated noise=0.188186 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000356475 Jy
! Component: 100  -  total flux cleaned = 0.000191229 Jy
! Component: 150  -  total flux cleaned = 0.000223362 Jy
! Component: 200  -  total flux cleaned = 0.000278523 Jy
! Total flux subtracted in 200 components = 0.000278523 Jy
! Clean residual min=-0.003514 max=0.003295 Jy/beam
! Clean residual mean=-0.000006 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.165982 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.165982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059192Jy  sigma=1.203418
! Fit after  self-cal, rms=0.059180Jy  sigma=1.203021
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.12115e-05 Jy
! Component: 100  -  total flux cleaned = 4.29702e-05 Jy
! Component: 150  -  total flux cleaned = 0.00012105 Jy
! Component: 200  -  total flux cleaned = 0.000166751 Jy
! Total flux subtracted in 200 components = 0.000166751 Jy
! Clean residual min=-0.003472 max=0.003162 Jy/beam
! Clean residual mean=-0.000006 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.166149 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.166149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059143Jy  sigma=1.202325
! Fit after  self-cal, rms=0.059127Jy  sigma=1.202086
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059127Jy  sigma=1.202086
! Fit after  self-cal, rms=0.059091Jy  sigma=1.188220
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8136 mas, bmaj=1.928 mas, bpa=-1.889 degrees
! Estimated noise=0.188492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011877 Jy
! Component: 100  -  total flux cleaned = -5.98077e-05 Jy
! Component: 150  -  total flux cleaned = -0.000136676 Jy
! Component: 200  -  total flux cleaned = -0.000158893 Jy
! Total flux subtracted in 200 components = -0.000158893 Jy
! Clean residual min=-0.003583 max=0.003150 Jy/beam
! Clean residual mean=-0.000000 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.16599 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 65 components and 0.16599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059056Jy  sigma=1.187549
! Fit after  self-cal, rms=0.059064Jy  sigma=1.187207
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.71746e-05 Jy
! Component: 100  -  total flux cleaned = -4.1225e-05 Jy
! Component: 150  -  total flux cleaned = -4.14523e-05 Jy
! Component: 200  -  total flux cleaned = -2.02033e-05 Jy
! Total flux subtracted in 200 components = -2.02033e-05 Jy
! Clean residual min=-0.003479 max=0.003092 Jy/beam
! Clean residual mean=-0.000000 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.16597 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.16597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059040Jy  sigma=1.186707
! Fit after  self-cal, rms=0.059029Jy  sigma=1.186545
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059029Jy  sigma=1.186545
! Fit after  self-cal, rms=0.059092Jy  sigma=1.186502
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.009 mas, bmaj=3.441 mas, bpa=-4.351 degrees
! Estimated noise=0.246121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210848 Jy
! Component: 100  -  total flux cleaned = 0.00238063 Jy
! Component: 150  -  total flux cleaned = 0.0024222 Jy
! Component: 200  -  total flux cleaned = 0.00245618 Jy
! Total flux subtracted in 200 components = 0.00245618 Jy
! Clean residual min=-0.004377 max=0.002850 Jy/beam
! Clean residual mean=0.000000 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.168426 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 73 components and 0.168426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059117Jy  sigma=1.186512
! Fit after  self-cal, rms=0.059098Jy  sigma=1.186211
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218917 Jy
! Component: 100  -  total flux cleaned = 0.00025536 Jy
! Component: 150  -  total flux cleaned = 0.000285617 Jy
! Component: 200  -  total flux cleaned = 0.000310326 Jy
! Total flux subtracted in 200 components = 0.000310326 Jy
! Clean residual min=-0.004144 max=0.002678 Jy/beam
! Clean residual mean=0.000000 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.168736 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 75 components and 0.168736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059131Jy  sigma=1.186729
! Fit after  self-cal, rms=0.059116Jy  sigma=1.186545
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8137 mas, bmaj=1.929 mas, bpa=-1.897 degrees
! Estimated noise=0.188683 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8137 x 1.929 at -1.897 degrees (North through East)
! Clean map  min=-0.0032317  max=0.11167 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6369 mas, bmaj=1.621 mas, bpa=-1.804 degrees
! Estimated noise=0.361685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0936139 Jy
! Component: 100  -  total flux cleaned = 0.116846 Jy
! Component: 150  -  total flux cleaned = 0.129128 Jy
! Component: 200  -  total flux cleaned = 0.137074 Jy
! Total flux subtracted in 200 components = 0.137074 Jy
! Clean residual min=-0.003540 max=0.004581 Jy/beam
! Clean residual mean=-0.000002 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.137074 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.137074 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8137 mas, bmaj=1.929 mas, bpa=-1.897 degrees
! Estimated noise=0.188683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00881694 Jy
! Component: 100  -  total flux cleaned = 0.0142642 Jy
! Component: 150  -  total flux cleaned = 0.0182338 Jy
! Component: 200  -  total flux cleaned = 0.0212027 Jy
! Total flux subtracted in 200 components = 0.0212027 Jy
! Clean residual min=-0.002568 max=0.003789 Jy/beam
! Clean residual mean=-0.000001 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.158277 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 44 components and 0.158277 Jy
! Inverting map 
! Added new window around map position (-0.8, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347384 Jy
! Component: 100  -  total flux cleaned = 0.00545525 Jy
! Component: 150  -  total flux cleaned = 0.00673165 Jy
! Component: 200  -  total flux cleaned = 0.00782366 Jy
! Total flux subtracted in 200 components = 0.00782366 Jy
! Clean residual min=-0.002299 max=0.002815 Jy/beam
! Clean residual mean=-0.000000 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.166101 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 61 components and 0.166101 Jy
! Inverting map 
! Added new window around map position (1.8, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247075 Jy
! Component: 100  -  total flux cleaned = 0.00279926 Jy
! Component: 150  -  total flux cleaned = 0.00320105 Jy
! Component: 200  -  total flux cleaned = 0.00354991 Jy
! Total flux subtracted in 200 components = 0.00354991 Jy
! Clean residual min=-0.002255 max=0.002527 Jy/beam
! Clean residual mean=0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.169651 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.169651 Jy
! Inverting map 
! Added new window around map position (0.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183837 Jy
! Component: 100  -  total flux cleaned = 0.00196959 Jy
! Component: 150  -  total flux cleaned = 0.00204378 Jy
! Component: 200  -  total flux cleaned = 0.00204207 Jy
! Total flux subtracted in 200 components = 0.00204207 Jy
! Clean residual min=-0.002297 max=0.001606 Jy/beam
! Clean residual mean=0.000000 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.171693 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 100 components and 0.171693 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.009 mas, bmaj=3.441 mas, bpa=-4.351 degrees
! Estimated noise=0.246121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000266865 Jy
! Component: 100  -  total flux cleaned = -4.51048e-05 Jy
! Component: 150  -  total flux cleaned = 0.000153002 Jy
! Component: 200  -  total flux cleaned = 0.000310626 Jy
! Total flux subtracted in 200 components = 0.000310626 Jy
! Clean residual min=-0.003752 max=0.002390 Jy/beam
! Clean residual mean=0.000000 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.172003 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.28706e-05 Jy
! Component: 100  -  total flux cleaned = 0.000141611 Jy
! Component: 150  -  total flux cleaned = 0.000178698 Jy
! Component: 200  -  total flux cleaned = 0.000196473 Jy
! Total flux subtracted in 200 components = 0.000196473 Jy
! Clean residual min=-0.003703 max=0.002313 Jy/beam
! Clean residual mean=0.000000 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.1722 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 117 components and 0.1722 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8137 mas, bmaj=1.929 mas, bpa=-1.897 degrees
! Estimated noise=0.188683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.58877e-06 Jy
! Component: 100  -  total flux cleaned = -6.24969e-05 Jy
! Component: 150  -  total flux cleaned = -6.27123e-05 Jy
! Component: 200  -  total flux cleaned = -8.56485e-05 Jy
! Total flux subtracted in 200 components = -8.56485e-05 Jy
! Clean residual min=-0.002239 max=0.001469 Jy/beam
! Clean residual mean=0.000000 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.172114 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 126 components and 0.172114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058702Jy  sigma=1.179559
! Fit after  self-cal, rms=0.058665Jy  sigma=1.179008
wmodel J0650-0152_X_map.mod
! Writing 126 model components to file: J0650-0152_X_map.mod
wobs   J0650-0152_X_uvs.fits
! Writing UV FITS file: J0650-0152_X_uvs.fits
wwins  J0650-0152_X_map.win
! wwins: Wrote 6 windows to J0650-0152_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000921748 Jy
! Component: 100  -  total flux cleaned = -0.000825043 Jy
! Component: 150  -  total flux cleaned = -0.000499823 Jy
! Component: 200  -  total flux cleaned = -0.000261925 Jy
! Component: 250  -  total flux cleaned = -1.19139e-05 Jy
! Component: 300  -  total flux cleaned = 0.000272655 Jy
! Component: 350  -  total flux cleaned = 0.000462266 Jy
! Component: 400  -  total flux cleaned = 0.00064664 Jy
! Component: 450  -  total flux cleaned = 0.000825148 Jy
! Component: 500  -  total flux cleaned = 0.000998355 Jy
! Component: 550  -  total flux cleaned = 0.00116717 Jy
! Component: 600  -  total flux cleaned = 0.00133129 Jy
! Component: 650  -  total flux cleaned = 0.00147346 Jy
! Component: 700  -  total flux cleaned = 0.00156009 Jy
! Component: 750  -  total flux cleaned = 0.00161131 Jy
! Component: 800  -  total flux cleaned = 0.00169454 Jy
! Component: 850  -  total flux cleaned = 0.00172725 Jy
! Component: 900  -  total flux cleaned = 0.00172732 Jy
! Component: 950  -  total flux cleaned = 0.00174342 Jy
! Component: 1000  -  total flux cleaned = 0.00178984 Jy
! Component: 1050  -  total flux cleaned = 0.00180503 Jy
! Component: 1100  -  total flux cleaned = 0.00181997 Jy
! Component: 1150  -  total flux cleaned = 0.00180533 Jy
! Component: 1200  -  total flux cleaned = 0.0018345 Jy
! Component: 1250  -  total flux cleaned = 0.00186292 Jy
! Component: 1300  -  total flux cleaned = 0.00186286 Jy
! Component: 1350  -  total flux cleaned = 0.00190485 Jy
! Component: 1400  -  total flux cleaned = 0.00190484 Jy
! Component: 1450  -  total flux cleaned = 0.00193202 Jy
! Component: 1500  -  total flux cleaned = 0.00189176 Jy
! Component: 1550  -  total flux cleaned = 0.0019185 Jy
! Component: 1600  -  total flux cleaned = 0.00198417 Jy
! Component: 1650  -  total flux cleaned = 0.00198413 Jy
! Component: 1700  -  total flux cleaned = 0.00199689 Jy
! Component: 1750  -  total flux cleaned = 0.00200953 Jy
! Component: 1800  -  total flux cleaned = 0.00199719 Jy
! Component: 1850  -  total flux cleaned = 0.00203454 Jy
! Component: 1900  -  total flux cleaned = 0.00204678 Jy
! Component: 1950  -  total flux cleaned = 0.0020588 Jy
! Component: 2000  -  total flux cleaned = 0.00204656 Jy
! Component: 2050  -  total flux cleaned = 0.00204654 Jy
! Component: 2100  -  total flux cleaned = 0.00201126 Jy
! Component: 2150  -  total flux cleaned = 0.00203461 Jy
! Component: 2200  -  total flux cleaned = 0.00198822 Jy
! Component: 2250  -  total flux cleaned = 0.0019882 Jy
! Component: 2300  -  total flux cleaned = 0.00198814 Jy
! Component: 2350  -  total flux cleaned = 0.00198812 Jy
! Component: 2400  -  total flux cleaned = 0.00194357 Jy
! Component: 2450  -  total flux cleaned = 0.00198786 Jy
! Component: 2500  -  total flux cleaned = 0.00194392 Jy
! Component: 2550  -  total flux cleaned = 0.00192228 Jy
! Component: 2600  -  total flux cleaned = 0.00193306 Jy
! Component: 2650  -  total flux cleaned = 0.00191159 Jy
! Component: 2700  -  total flux cleaned = 0.00186929 Jy
! Component: 2750  -  total flux cleaned = 0.00183787 Jy
! Component: 2800  -  total flux cleaned = 0.00178601 Jy
! Component: 2850  -  total flux cleaned = 0.00180661 Jy
! Component: 2900  -  total flux cleaned = 0.00176568 Jy
! Component: 2950  -  total flux cleaned = 0.00179608 Jy
! Component: 3000  -  total flux cleaned = 0.00177582 Jy
! Component: 3050  -  total flux cleaned = 0.00172577 Jy
! Component: 3100  -  total flux cleaned = 0.00175549 Jy
! Component: 3150  -  total flux cleaned = 0.00168651 Jy
! Component: 3200  -  total flux cleaned = 0.00167667 Jy
! Component: 3250  -  total flux cleaned = 0.00167665 Jy
! Component: 3300  -  total flux cleaned = 0.00161885 Jy
! Component: 3350  -  total flux cleaned = 0.00159984 Jy
! Component: 3400  -  total flux cleaned = 0.0015903 Jy
! Component: 3450  -  total flux cleaned = 0.0015527 Jy
! Component: 3500  -  total flux cleaned = 0.00155268 Jy
! Component: 3550  -  total flux cleaned = 0.00152487 Jy
! Component: 3600  -  total flux cleaned = 0.00148793 Jy
! Component: 3650  -  total flux cleaned = 0.00148788 Jy
! Component: 3700  -  total flux cleaned = 0.0014696 Jy
! Component: 3750  -  total flux cleaned = 0.0014335 Jy
! Component: 3800  -  total flux cleaned = 0.00143353 Jy
! Component: 3850  -  total flux cleaned = 0.00140669 Jy
! Component: 3900  -  total flux cleaned = 0.00137118 Jy
! Component: 3950  -  total flux cleaned = 0.00135346 Jy
! Component: 4000  -  total flux cleaned = 0.0013184 Jy
! Component: 4050  -  total flux cleaned = 0.00132707 Jy
! Total flux subtracted in 4096 components = 0.00128383 Jy
! Clean residual min=-0.000504 max=0.000548 Jy/beam
! Clean residual mean=-0.000000 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.173398 Jy
keep
! Adding 331 model components to the UV plane model.
! The established model now contains 457 components and 0.173398 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0650-0152_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8137 x 1.929 at -1.897 degrees (North through East)
! Clean map  min=-0.0014765  max=0.11359 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0650-0152_X_map.fits
wmodel /vlbi/uf001/uva//J0650-0152_X_map.mod
! Writing 457 model components to file: /vlbi/uf001/uva//J0650-0152_X_map.mod
wobs   /vlbi/uf001/uva//J0650-0152_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0650-0152_X_uvs.fits
wwins  /vlbi/uf001/uva//J0650-0152_X_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J0650-0152_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.113591 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015123 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.399408 0.399408 0.798815 1.59763 3.19526 6.39052 12.781 25.5621 51.1242
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  751.112 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0650-0152_X_dfm.log closed on Sun Jan 13 23:11:49 2019