! Started logfile: /vlbi/uf001/uva//J0650+6001_X_dfm.log on Sun Jan 13 23:11:31 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J0650+6001_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J0650+6001_X_uva.fits ! AN table 1: 42 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.883598 visibilities/baseline/integration-bin. ! Found source: J0650+6001 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16032 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0650+6001_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.187258Jy sigma=21.727204 ! Fit after self-cal, rms=0.480056Jy sigma=9.367834 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7496 mas, bmaj=0.8925 mas, bpa=36.97 degrees ! Estimated noise=0.568839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.389896 Jy ! Component: 100 - total flux cleaned = 0.513649 Jy ! Total flux subtracted in 100 components = 0.513649 Jy ! Clean residual min=-0.042406 max=0.129536 Jy/beam ! Clean residual mean=-0.000012 rms=0.009043 Jy/beam ! Combined flux in latest and established models = 0.513649 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.513649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.245396Jy sigma=4.120295 ! Fit after self-cal, rms=0.245093Jy sigma=4.115794 ! Inverting map ! Added new window around map position (-1.6, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115126 Jy ! Component: 100 - total flux cleaned = 0.182656 Jy ! Total flux subtracted in 100 components = 0.182656 Jy ! Clean residual min=-0.028497 max=0.039516 Jy/beam ! Clean residual mean=-0.000007 rms=0.005407 Jy/beam ! Combined flux in latest and established models = 0.696305 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.696305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154104Jy sigma=2.594854 ! Fit after self-cal, rms=0.150609Jy sigma=2.522108 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515827 Jy ! Component: 100 - total flux cleaned = 0.0887501 Jy ! Total flux subtracted in 100 components = 0.0887501 Jy ! Clean residual min=-0.021584 max=0.027178 Jy/beam ! Clean residual mean=-0.000004 rms=0.003990 Jy/beam ! Combined flux in latest and established models = 0.785055 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.785055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116375Jy sigma=1.980313 ! Fit after self-cal, rms=0.116040Jy sigma=1.972970 ! Inverting map ! Added new window around map position (0.4, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030545 Jy ! Component: 100 - total flux cleaned = 0.0540831 Jy ! Total flux subtracted in 100 components = 0.0540831 Jy ! Clean residual min=-0.018592 max=0.020263 Jy/beam ! Clean residual mean=-0.000003 rms=0.003380 Jy/beam ! Combined flux in latest and established models = 0.839138 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.839138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100276Jy sigma=1.728376 ! Fit after self-cal, rms=0.100174Jy sigma=1.726245 ! Inverting map ! Added new window around map position (13.8, 30.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213752 Jy ! Component: 100 - total flux cleaned = 0.0381225 Jy ! Total flux subtracted in 100 components = 0.0381225 Jy ! Clean residual min=-0.016672 max=0.015727 Jy/beam ! Clean residual mean=-0.000002 rms=0.003007 Jy/beam ! Combined flux in latest and established models = 0.877261 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.87726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092054Jy sigma=1.601666 ! Fit after self-cal, rms=0.091955Jy sigma=1.599777 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9357 mas, bmaj=1.108 mas, bpa=39.17 degrees ! Estimated noise=0.333332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240028 Jy ! Component: 100 - total flux cleaned = 0.0421965 Jy ! Component: 150 - total flux cleaned = 0.0571353 Jy ! Component: 200 - total flux cleaned = 0.0696899 Jy ! Total flux subtracted in 200 components = 0.0696899 Jy ! Clean residual min=-0.013528 max=0.015099 Jy/beam ! Clean residual mean=-0.000007 rms=0.002944 Jy/beam ! Combined flux in latest and established models = 0.94695 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 63 components and 0.94695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080742Jy sigma=1.427727 ! Fit after self-cal, rms=0.080270Jy sigma=1.420131 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9357 x 1.108 at 39.17 degrees (North through East) ! Clean map min=-0.012665 max=0.55558 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.95 KP 1.00 LA 0.98 ! MK 1.04 NL 1.08 OV 0.92 PT 0.90 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.97 KP 0.98 LA 0.99 ! MK 1.04 NL 1.09 OV 0.91 PT 0.91 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.96 KP 0.98 LA 0.98 ! MK 1.03 NL 1.09 OV 0.93 PT 0.90 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.96 KP 0.99 LA 0.99 ! MK 1.04 NL 1.10 OV 0.93 PT 0.91 ! SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.97 KP 1.00 LA 0.99 ! MK 1.06 NL 1.10 OV 0.93 PT 0.92 ! SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.97 KP 1.00 LA 0.98 ! MK 1.05 NL 1.10 OV 0.93 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.98 KP 1.01 LA 1.00 ! MK 1.07 NL 1.09 OV 0.96 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.98 KP 1.02 LA 0.99 ! MK 1.08 NL 1.09 OV 0.94 PT 0.92 ! SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.98 KP 1.02 LA 1.00 ! MK 1.07 NL 1.10 OV 0.95 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 0.99 KP 1.00 LA 0.99 ! MK 1.06 NL 1.11 OV 0.93 PT 0.93 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.97 KP 1.02 LA 1.00 ! MK 1.07 NL 1.11 OV 0.95 PT 0.92 ! SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 0.98 KP 1.01 LA 1.00 ! MK 1.07 NL 1.12 OV 0.94 PT 0.92 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.080270Jy sigma=1.420131 ! Fit after self-cal, rms=0.061115Jy sigma=1.094810 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9363 mas, bmaj=1.118 mas, bpa=39.36 degrees ! Estimated noise=0.333308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708896 Jy ! Component: 100 - total flux cleaned = 0.00733176 Jy ! Component: 150 - total flux cleaned = 0.00732523 Jy ! Component: 200 - total flux cleaned = 0.00732576 Jy ! Total flux subtracted in 200 components = 0.00732576 Jy ! Clean residual min=-0.004383 max=0.004792 Jy/beam ! Clean residual mean=0.000008 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.954276 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.954276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059527Jy sigma=1.065408 ! Fit after self-cal, rms=0.059441Jy sigma=1.063763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059441Jy sigma=1.063763 ! Fit after self-cal, rms=0.058788Jy sigma=1.051667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.935 mas, bmaj=1.118 mas, bpa=39.22 degrees ! Estimated noise=0.333412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186147 Jy ! Component: 100 - total flux cleaned = 0.00235085 Jy ! Component: 150 - total flux cleaned = 0.00235087 Jy ! Component: 200 - total flux cleaned = 0.00222784 Jy ! Total flux subtracted in 200 components = 0.00222784 Jy ! Clean residual min=-0.003800 max=0.004124 Jy/beam ! Clean residual mean=0.000003 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.956504 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.956504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058012Jy sigma=1.037952 ! Fit after self-cal, rms=0.057968Jy sigma=1.037236 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257963 Jy ! Component: 100 - total flux cleaned = 0.00258891 Jy ! Component: 150 - total flux cleaned = 0.00259522 Jy ! Component: 200 - total flux cleaned = 0.00240375 Jy ! Total flux subtracted in 200 components = 0.00240375 Jy ! Clean residual min=-0.003852 max=0.003476 Jy/beam ! Clean residual mean=0.000003 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.958908 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.958908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057539Jy sigma=1.029428 ! Fit after self-cal, rms=0.057515Jy sigma=1.029008 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057515Jy sigma=1.029008 ! Fit after self-cal, rms=0.057331Jy sigma=1.026731 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9333 mas, bmaj=1.117 mas, bpa=39.13 degrees ! Estimated noise=0.333803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470471 Jy ! Component: 100 - total flux cleaned = 0.000700346 Jy ! Component: 150 - total flux cleaned = 0.000605855 Jy ! Component: 200 - total flux cleaned = 0.000336492 Jy ! Total flux subtracted in 200 components = 0.000336492 Jy ! Clean residual min=-0.003370 max=0.003245 Jy/beam ! Clean residual mean=0.000003 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.959244 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.959244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056977Jy sigma=1.020264 ! Fit after self-cal, rms=0.056961Jy sigma=1.019980 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214849 Jy ! Component: 100 - total flux cleaned = -3.41714e-05 Jy ! Component: 150 - total flux cleaned = -0.000492251 Jy ! Component: 200 - total flux cleaned = -0.000920911 Jy ! Total flux subtracted in 200 components = -0.000920911 Jy ! Clean residual min=-0.003295 max=0.003136 Jy/beam ! Clean residual mean=0.000003 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.958323 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 110 components and 0.958323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056769Jy sigma=1.016403 ! Fit after self-cal, rms=0.056762Jy sigma=1.016267 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056762Jy sigma=1.016267 ! Fit after self-cal, rms=0.056690Jy sigma=1.015158 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.048 mas, bmaj=2.251 mas, bpa=62.24 degrees ! Estimated noise=0.471499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203633 Jy ! Component: 100 - total flux cleaned = -0.000837491 Jy ! Component: 150 - total flux cleaned = -0.00142018 Jy ! Component: 200 - total flux cleaned = -0.001919 Jy ! Total flux subtracted in 200 components = -0.001919 Jy ! Clean residual min=-0.002980 max=0.003136 Jy/beam ! Clean residual mean=0.000006 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.956404 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 125 components and 0.956404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056602Jy sigma=1.013763 ! Fit after self-cal, rms=0.056595Jy sigma=1.013537 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.38895e-05 Jy ! Component: 100 - total flux cleaned = -0.000551788 Jy ! Component: 150 - total flux cleaned = -0.000906824 Jy ! Component: 200 - total flux cleaned = -0.00122519 Jy ! Total flux subtracted in 200 components = -0.00122519 Jy ! Clean residual min=-0.002766 max=0.002927 Jy/beam ! Clean residual mean=0.000005 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.955179 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.955179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056556Jy sigma=1.012892 ! Fit after self-cal, rms=0.056553Jy sigma=1.012811 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9323 mas, bmaj=1.116 mas, bpa=39.08 degrees ! Estimated noise=0.334177 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9323 x 1.116 at 39.08 degrees (North through East) ! Clean map min=-0.0028132 max=0.55308 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056553Jy sigma=1.012811 ! Fit after self-cal, rms=0.053000Jy sigma=0.937444 ! Inverting map and beam ! Estimated beam: bmin=0.9322 mas, bmaj=1.115 mas, bpa=39.2 degrees ! Estimated noise=0.334605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000644404 Jy ! Component: 100 - total flux cleaned = 0.000569251 Jy ! Component: 150 - total flux cleaned = 0.000501004 Jy ! Component: 200 - total flux cleaned = 0.000565692 Jy ! Total flux subtracted in 200 components = 0.000565692 Jy ! Clean residual min=-0.002866 max=0.002610 Jy/beam ! Clean residual mean=0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.955745 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 134 components and 0.955745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052809Jy sigma=0.933830 ! Fit after self-cal, rms=0.052800Jy sigma=0.933693 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160404 Jy ! Component: 100 - total flux cleaned = -1.86135e-05 Jy ! Component: 150 - total flux cleaned = -0.000188565 Jy ! Component: 200 - total flux cleaned = -0.000298974 Jy ! Total flux subtracted in 200 components = -0.000298974 Jy ! Clean residual min=-0.002745 max=0.002573 Jy/beam ! Clean residual mean=0.000002 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.955446 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 139 components and 0.955446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052689Jy sigma=0.931546 ! Fit after self-cal, rms=0.052687Jy sigma=0.931488 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052687Jy sigma=0.931488 ! Fit after self-cal, rms=0.052658Jy sigma=0.930979 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.746 mas, bmaj=0.9008 mas, bpa=37.18 degrees ! Estimated noise=0.572437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.39223 Jy ! Component: 100 - total flux cleaned = 0.538771 Jy ! Component: 150 - total flux cleaned = 0.63468 Jy ! Component: 200 - total flux cleaned = 0.701287 Jy ! Total flux subtracted in 200 components = 0.701287 Jy ! Clean residual min=-0.020048 max=0.039822 Jy/beam ! Clean residual mean=-0.000006 rms=0.004253 Jy/beam ! Combined flux in latest and established models = 0.701287 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.701287 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9314 mas, bmaj=1.114 mas, bpa=39.16 degrees ! Estimated noise=0.334845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660186 Jy ! Component: 100 - total flux cleaned = 0.109514 Jy ! Component: 150 - total flux cleaned = 0.140515 Jy ! Component: 200 - total flux cleaned = 0.163356 Jy ! Total flux subtracted in 200 components = 0.163356 Jy ! Clean residual min=-0.007271 max=0.013951 Jy/beam ! Clean residual mean=-0.000013 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 0.864643 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 0.864643 Jy ! Inverting map ! Added new window around map position (0, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180228 Jy ! Component: 100 - total flux cleaned = 0.0323268 Jy ! Component: 150 - total flux cleaned = 0.0437444 Jy ! Component: 200 - total flux cleaned = 0.0528931 Jy ! Total flux subtracted in 200 components = 0.0528931 Jy ! Clean residual min=-0.004515 max=0.005741 Jy/beam ! Clean residual mean=-0.000005 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.917536 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 54 components and 0.917537 Jy ! Inverting map ! Added new window around map position (-2.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00758121 Jy ! Component: 100 - total flux cleaned = 0.0139197 Jy ! Component: 150 - total flux cleaned = 0.0182464 Jy ! Component: 200 - total flux cleaned = 0.0214397 Jy ! Total flux subtracted in 200 components = 0.0214397 Jy ! Clean residual min=-0.003953 max=0.004084 Jy/beam ! Clean residual mean=-0.000001 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.938976 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 69 components and 0.938976 Jy ! Inverting map ! Added new window around map position (9.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208997 Jy ! Component: 100 - total flux cleaned = 0.00364534 Jy ! Component: 150 - total flux cleaned = 0.00521979 Jy ! Component: 200 - total flux cleaned = 0.00667745 Jy ! Total flux subtracted in 200 components = 0.00667745 Jy ! Clean residual min=-0.003122 max=0.003221 Jy/beam ! Clean residual mean=0.000000 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.945654 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 81 components and 0.945654 Jy ! Inverting map ! Added new window around map position (-9.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002259 Jy ! Component: 100 - total flux cleaned = 0.00331358 Jy ! Component: 150 - total flux cleaned = 0.00430314 Jy ! Component: 200 - total flux cleaned = 0.00522737 Jy ! Total flux subtracted in 200 components = 0.00522737 Jy ! Clean residual min=-0.002701 max=0.002869 Jy/beam ! Clean residual mean=0.000002 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.950881 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 91 components and 0.950881 Jy ! Inverting map ! Added new window around map position (-7.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517669 Jy ! Component: 100 - total flux cleaned = 0.00119435 Jy ! Component: 150 - total flux cleaned = 0.00181216 Jy ! Component: 200 - total flux cleaned = 0.00214521 Jy ! Total flux subtracted in 200 components = 0.00214521 Jy ! Clean residual min=-0.002433 max=0.002578 Jy/beam ! Clean residual mean=0.000002 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.953026 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 106 components and 0.953026 Jy ! Inverting map ! Added new window around map position (-3.8, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572159 Jy ! Component: 100 - total flux cleaned = 0.000814608 Jy ! Component: 150 - total flux cleaned = 0.00104421 Jy ! Component: 200 - total flux cleaned = 0.00132717 Jy ! Total flux subtracted in 200 components = 0.00132717 Jy ! Clean residual min=-0.002220 max=0.002244 Jy/beam ! Clean residual mean=0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.954353 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 118 components and 0.954353 Jy ! Inverting map ! Added new window around map position (12.6, 20.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988513 Jy ! Component: 100 - total flux cleaned = 0.00139601 Jy ! Component: 150 - total flux cleaned = 0.00139857 Jy ! Component: 200 - total flux cleaned = 0.00146106 Jy ! Total flux subtracted in 200 components = 0.00146106 Jy ! Clean residual min=-0.002057 max=0.001976 Jy/beam ! Clean residual mean=0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.955815 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 137 components and 0.955815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.049 mas, bmaj=2.251 mas, bpa=62.45 degrees ! Estimated noise=0.473173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.13366e-05 Jy ! Component: 100 - total flux cleaned = 0.000202327 Jy ! Component: 150 - total flux cleaned = 0.000116202 Jy ! Component: 200 - total flux cleaned = 0.000116534 Jy ! Total flux subtracted in 200 components = 0.000116534 Jy ! Clean residual min=-0.002256 max=0.002265 Jy/beam ! Clean residual mean=0.000007 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.955931 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.37921e-05 Jy ! Component: 100 - total flux cleaned = -0.000175348 Jy ! Component: 150 - total flux cleaned = -0.000240991 Jy ! Component: 200 - total flux cleaned = -0.000394167 Jy ! Total flux subtracted in 200 components = -0.000394167 Jy ! Clean residual min=-0.002138 max=0.002187 Jy/beam ! Clean residual mean=0.000006 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.955537 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 163 components and 0.955537 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9314 mas, bmaj=1.114 mas, bpa=39.16 degrees ! Estimated noise=0.334845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336503 Jy ! Component: 100 - total flux cleaned = -0.000277537 Jy ! Component: 150 - total flux cleaned = -0.00033001 Jy ! Component: 200 - total flux cleaned = -0.000279044 Jy ! Total flux subtracted in 200 components = -0.000279044 Jy ! Clean residual min=-0.001860 max=0.001849 Jy/beam ! Clean residual mean=0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.955258 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 175 components and 0.955258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052327Jy sigma=0.924944 ! Fit after self-cal, rms=0.052296Jy sigma=0.924247 wmodel J0650+6001_X_map.mod ! Writing 175 model components to file: J0650+6001_X_map.mod wobs J0650+6001_X_uvs.fits ! Writing UV FITS file: J0650+6001_X_uvs.fits wwins J0650+6001_X_map.win ! wwins: Wrote 14 windows to J0650+6001_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.02965e-05 Jy ! Component: 100 - total flux cleaned = -0.000219686 Jy ! Component: 150 - total flux cleaned = -0.000403607 Jy ! Component: 200 - total flux cleaned = -0.000581372 Jy ! Component: 250 - total flux cleaned = -0.000667917 Jy ! Component: 300 - total flux cleaned = -0.000780595 Jy ! Component: 350 - total flux cleaned = -0.000890315 Jy ! Component: 400 - total flux cleaned = -0.00105121 Jy ! Component: 450 - total flux cleaned = -0.00112937 Jy ! Component: 500 - total flux cleaned = -0.00118094 Jy ! Component: 550 - total flux cleaned = -0.00125686 Jy ! Component: 600 - total flux cleaned = -0.00130733 Jy ! Component: 650 - total flux cleaned = -0.00150475 Jy ! Component: 700 - total flux cleaned = -0.00150404 Jy ! Component: 750 - total flux cleaned = -0.00155254 Jy ! Component: 800 - total flux cleaned = -0.00162332 Jy ! Component: 850 - total flux cleaned = -0.00169362 Jy ! Component: 900 - total flux cleaned = -0.00171695 Jy ! Component: 950 - total flux cleaned = -0.0018077 Jy ! Component: 1000 - total flux cleaned = -0.00174103 Jy ! Component: 1050 - total flux cleaned = -0.00174135 Jy ! Component: 1100 - total flux cleaned = -0.0017411 Jy ! Component: 1150 - total flux cleaned = -0.00171977 Jy ! Component: 1200 - total flux cleaned = -0.00165525 Jy ! Component: 1250 - total flux cleaned = -0.00169721 Jy ! Component: 1300 - total flux cleaned = -0.0016554 Jy ! Component: 1350 - total flux cleaned = -0.00167626 Jy ! Component: 1400 - total flux cleaned = -0.00163535 Jy ! Component: 1450 - total flux cleaned = -0.00171594 Jy ! Component: 1500 - total flux cleaned = -0.00165589 Jy ! Component: 1550 - total flux cleaned = -0.00171545 Jy ! Component: 1600 - total flux cleaned = -0.00171544 Jy ! Component: 1650 - total flux cleaned = -0.00175425 Jy ! Component: 1700 - total flux cleaned = -0.00169681 Jy ! Component: 1750 - total flux cleaned = -0.00171601 Jy ! Component: 1800 - total flux cleaned = -0.001754 Jy ! Component: 1850 - total flux cleaned = -0.00175388 Jy ! Component: 1900 - total flux cleaned = -0.00173547 Jy ! Component: 1950 - total flux cleaned = -0.00169901 Jy ! Component: 2000 - total flux cleaned = -0.00171695 Jy ! Component: 2050 - total flux cleaned = -0.00166347 Jy ! Component: 2100 - total flux cleaned = -0.00171682 Jy ! Component: 2150 - total flux cleaned = -0.00171695 Jy ! Component: 2200 - total flux cleaned = -0.0016647 Jy ! Component: 2250 - total flux cleaned = -0.00164755 Jy ! Component: 2300 - total flux cleaned = -0.00171612 Jy ! Component: 2350 - total flux cleaned = -0.00161422 Jy ! Component: 2400 - total flux cleaned = -0.00154673 Jy ! Component: 2450 - total flux cleaned = -0.00161386 Jy ! Component: 2500 - total flux cleaned = -0.00159705 Jy ! Component: 2550 - total flux cleaned = -0.00159706 Jy ! Component: 2600 - total flux cleaned = -0.00156438 Jy ! Component: 2650 - total flux cleaned = -0.0015159 Jy ! Component: 2700 - total flux cleaned = -0.00156416 Jy ! Component: 2750 - total flux cleaned = -0.00159583 Jy ! Component: 2800 - total flux cleaned = -0.00159563 Jy ! Component: 2850 - total flux cleaned = -0.0015485 Jy ! Component: 2900 - total flux cleaned = -0.00150187 Jy ! Component: 2950 - total flux cleaned = -0.00153278 Jy ! Component: 3000 - total flux cleaned = -0.0015329 Jy ! Component: 3050 - total flux cleaned = -0.0015177 Jy ! Component: 3100 - total flux cleaned = -0.00148747 Jy ! Component: 3150 - total flux cleaned = -0.00159261 Jy ! Component: 3200 - total flux cleaned = -0.0014882 Jy ! Component: 3250 - total flux cleaned = -0.00151786 Jy ! Component: 3300 - total flux cleaned = -0.00150317 Jy ! Component: 3350 - total flux cleaned = -0.00150313 Jy ! Component: 3400 - total flux cleaned = -0.00145949 Jy ! Component: 3450 - total flux cleaned = -0.0014452 Jy ! Component: 3500 - total flux cleaned = -0.0014738 Jy ! Component: 3550 - total flux cleaned = -0.00144552 Jy ! Component: 3600 - total flux cleaned = -0.00137474 Jy ! Component: 3650 - total flux cleaned = -0.00138893 Jy ! Component: 3700 - total flux cleaned = -0.00134701 Jy ! Component: 3750 - total flux cleaned = -0.00136088 Jy ! Component: 3800 - total flux cleaned = -0.00134671 Jy ! Component: 3850 - total flux cleaned = -0.00129212 Jy ! Component: 3900 - total flux cleaned = -0.00125133 Jy ! Component: 3950 - total flux cleaned = -0.00123801 Jy ! Component: 4000 - total flux cleaned = -0.00123794 Jy ! Component: 4050 - total flux cleaned = -0.00123801 Jy ! Total flux subtracted in 4096 components = -0.00125141 Jy ! Clean residual min=-0.000752 max=0.000796 Jy/beam ! Clean residual mean=0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.954006 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 511 components and 0.954006 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J0650+6001_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9314 x 1.114 at 39.16 degrees (North through East) ! Clean map min=-0.0018174 max=0.5568 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J0650+6001_X_map.fits wmodel /vlbi/uf001/uva//J0650+6001_X_map.mod ! Writing 511 model components to file: /vlbi/uf001/uva//J0650+6001_X_map.mod wobs /vlbi/uf001/uva//J0650+6001_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J0650+6001_X_uvs.fits wwins /vlbi/uf001/uva//J0650+6001_X_map.win ! wwins: Wrote 15 windows to /vlbi/uf001/uva//J0650+6001_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.556803 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022085 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.118992 0.118992 0.237984 0.475968 0.951936 1.90387 3.80774 7.61548 15.231 30.4619 60.9239 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.556 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2521.18 quit ! Quitting program ! Log file /vlbi/uf001/uva//J0650+6001_X_dfm.log closed on Sun Jan 13 23:11:37 2019