! Started logfile: /vlbi/uf001/uva//J0649-4108_X_b_dfm.log on Sun Jan 13 23:10:56 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0649-4108_X_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0649-4108_X_b_uva.fits
! AN table 1: 74 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.999099 visibilities/baseline/integration-bin.
! Found source: J0649-4108
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 13308 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0649-4108_X_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004408Jy  sigma=13.822510
! Fit after  self-cal, rms=0.918815Jy  sigma=12.432767
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=14.36 mas, bpa=-9.561 degrees
! Estimated noise=1.4757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0618747 Jy
! Component: 100  -  total flux cleaned = 0.0826638 Jy
! Total flux subtracted in 100 components = 0.0826638 Jy
! Clean residual min=-0.011907 max=0.014136 Jy/beam
! Clean residual mean=-0.000036 rms=0.004036 Jy/beam
! Combined flux in latest and established models = 0.0826638 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.0826638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101715Jy  sigma=1.264619
! Fit after  self-cal, rms=0.101365Jy  sigma=1.259921
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.372 mas, bmaj=16.88 mas, bpa=-10.56 degrees
! Estimated noise=0.470107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251843 Jy
! Component: 100  -  total flux cleaned = 0.0384098 Jy
! Component: 150  -  total flux cleaned = 0.0431112 Jy
! Component: 200  -  total flux cleaned = 0.0456557 Jy
! Total flux subtracted in 200 components = 0.0456557 Jy
! Clean residual min=-0.006551 max=0.006386 Jy/beam
! Clean residual mean=-0.000023 rms=0.002097 Jy/beam
! Combined flux in latest and established models = 0.12832 Jy
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 121 components and 0.12832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096706Jy  sigma=1.142166
! Fit after  self-cal, rms=0.096978Jy  sigma=1.139093
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.372 x 16.88 at -10.56 degrees (North through East)
! Clean map  min=-0.0076561  max=0.081213 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.04     KP        1.08     LA        0.87     NL        1.30     
!   OV        0.95     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.98     KP        1.02     LA        0.87     NL        1.22     
!   OV        1.00     PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.03     KP        1.04     LA        0.86     NL        1.23     
!   OV        0.98     PT        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.07     KP        1.07     LA        0.94     NL        1.40     
!   OV        1.01     PT        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.08     KP        1.10     LA        0.86     NL        1.14     
!   OV        1.01     PT        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.09     KP        1.07     LA        0.90     NL        1.22     
!   OV        1.00     PT        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.01     KP        1.00     LA        0.93     NL        1.10     
!   OV        0.92     PT        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.05     KP        1.04     LA        0.87     NL        1.14     
!   OV        0.91     PT        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.05     KP        1.09     LA        0.83     NL        1.14     
!   OV        0.94     PT        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.05     KP        1.06     LA        0.82     NL        1.10     
!   OV        0.98     PT        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.98     KP        1.04     LA        0.88     NL        1.13     
!   OV        0.97     PT        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.95     KP        1.11     LA        0.89     NL        1.03     
!   OV        0.96     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.096978Jy  sigma=1.139093
! Fit after  self-cal, rms=0.102540Jy  sigma=1.126520
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.394 mas, bmaj=17.33 mas, bpa=-10.42 degrees
! Estimated noise=0.471339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169197 Jy
! Component: 100  -  total flux cleaned = 0.00224316 Jy
! Component: 150  -  total flux cleaned = 0.00263677 Jy
! Component: 200  -  total flux cleaned = 0.00277392 Jy
! Total flux subtracted in 200 components = 0.00277392 Jy
! Clean residual min=-0.002657 max=0.003175 Jy/beam
! Clean residual mean=-0.000001 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.131094 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 140 components and 0.131093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102434Jy  sigma=1.125090
! Fit after  self-cal, rms=0.102944Jy  sigma=1.123736
! Inverting map 
! Added new window around map position (9.4, 24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174198 Jy
! Component: 100  -  total flux cleaned = 5.68691e-05 Jy
! Component: 150  -  total flux cleaned = 4.45966e-05 Jy
! Component: 200  -  total flux cleaned = 9.63283e-05 Jy
! Total flux subtracted in 200 components = 9.63283e-05 Jy
! Clean residual min=-0.002033 max=0.002171 Jy/beam
! Clean residual mean=-0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.13119 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 172 components and 0.13119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102728Jy  sigma=1.121568
! Fit after  self-cal, rms=0.102934Jy  sigma=1.120859
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102934Jy  sigma=1.120859
! Fit after  self-cal, rms=0.103195Jy  sigma=1.120609
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.393 mas, bmaj=17.32 mas, bpa=-10.41 degrees
! Estimated noise=0.471248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427598 Jy
! Component: 100  -  total flux cleaned = 0.000945088 Jy
! Component: 150  -  total flux cleaned = 0.00160293 Jy
! Component: 200  -  total flux cleaned = 0.00199066 Jy
! Total flux subtracted in 200 components = 0.00199066 Jy
! Clean residual min=-0.001620 max=0.002004 Jy/beam
! Clean residual mean=-0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.13318 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 200 components and 0.13318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103102Jy  sigma=1.119744
! Fit after  self-cal, rms=0.103280Jy  sigma=1.119471
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160526 Jy
! Component: 100  -  total flux cleaned = 0.000520831 Jy
! Component: 150  -  total flux cleaned = 0.000655133 Jy
! Component: 200  -  total flux cleaned = 0.000696263 Jy
! Total flux subtracted in 200 components = 0.000696263 Jy
! Clean residual min=-0.001576 max=0.001936 Jy/beam
! Clean residual mean=-0.000001 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.133877 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 220 components and 0.133877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103219Jy  sigma=1.118963
! Fit after  self-cal, rms=0.103351Jy  sigma=1.118845
! Inverting map 
! Added new window around map position (-42.6, -25.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000884288 Jy
! Component: 100  -  total flux cleaned = 0.00094059 Jy
! Component: 150  -  total flux cleaned = 0.00119507 Jy
! Component: 200  -  total flux cleaned = 0.00151547 Jy
! Total flux subtracted in 200 components = 0.00151547 Jy
! Clean residual min=-0.001493 max=0.001191 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.135392 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 240 components and 0.135392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103261Jy  sigma=1.118126
! Fit after  self-cal, rms=0.103321Jy  sigma=1.117981
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103321Jy  sigma=1.117981
! Fit after  self-cal, rms=0.104197Jy  sigma=1.117915
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.397 mas, bmaj=17.33 mas, bpa=-10.42 degrees
! Estimated noise=0.471833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000768693 Jy
! Component: 100  -  total flux cleaned = 0.00106049 Jy
! Component: 150  -  total flux cleaned = 0.00131497 Jy
! Component: 200  -  total flux cleaned = 0.00158566 Jy
! Total flux subtracted in 200 components = 0.00158566 Jy
! Clean residual min=-0.001479 max=0.001202 Jy/beam
! Clean residual mean=-0.000002 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.136978 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 262 components and 0.136978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104140Jy  sigma=1.117446
! Fit after  self-cal, rms=0.104205Jy  sigma=1.117357
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029431 Jy
! Component: 100  -  total flux cleaned = 0.000333847 Jy
! Component: 150  -  total flux cleaned = 0.000524341 Jy
! Component: 200  -  total flux cleaned = 0.000765198 Jy
! Total flux subtracted in 200 components = 0.000765198 Jy
! Clean residual min=-0.001426 max=0.001088 Jy/beam
! Clean residual mean=-0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.137743 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 284 components and 0.137743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104166Jy  sigma=1.117037
! Fit after  self-cal, rms=0.104204Jy  sigma=1.116962
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104204Jy  sigma=1.116962
! Fit after  self-cal, rms=0.104408Jy  sigma=1.116925
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=21.9 mas, bpa=-13.41 degrees
! Estimated noise=0.471832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414768 Jy
! Component: 100  -  total flux cleaned = 0.000515855 Jy
! Component: 150  -  total flux cleaned = 0.000475499 Jy
! Component: 200  -  total flux cleaned = 0.000439177 Jy
! Total flux subtracted in 200 components = 0.000439177 Jy
! Clean residual min=-0.000832 max=0.001002 Jy/beam
! Clean residual mean=-0.000003 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.138182 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 322 components and 0.138182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104392Jy  sigma=1.116758
! Fit after  self-cal, rms=0.104421Jy  sigma=1.116732
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39.8, 39.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000226805 Jy
! Component: 100  -  total flux cleaned = 0.000608626 Jy
! Component: 150  -  total flux cleaned = 0.000799295 Jy
! Component: 200  -  total flux cleaned = 0.000822177 Jy
! Total flux subtracted in 200 components = 0.000822177 Jy
! Clean residual min=-0.000634 max=0.000554 Jy/beam
! Clean residual mean=-0.000003 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.139004 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 358 components and 0.139004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104402Jy  sigma=1.116480
! Fit after  self-cal, rms=0.104395Jy  sigma=1.116442
! Inverting map 
! Added new window around map position (-33.2, -42.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143217 Jy
! Component: 100  -  total flux cleaned = 0.000264216 Jy
! Component: 150  -  total flux cleaned = 0.0001596 Jy
! Component: 200  -  total flux cleaned = 6.19735e-05 Jy
! Total flux subtracted in 200 components = 6.19735e-05 Jy
! Clean residual min=-0.000532 max=0.000445 Jy/beam
! Clean residual mean=-0.000003 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.139066 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 389 components and 0.139066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104378Jy  sigma=1.116256
! Fit after  self-cal, rms=0.104379Jy  sigma=1.116230
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=17.33 mas, bpa=-10.43 degrees
! Estimated noise=0.471199 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.398 x 17.33 at -10.43 degrees (North through East)
! Clean map  min=-0.0040884  max=0.079967 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=14.78 mas, bpa=-9.365 degrees
! Estimated noise=1.52954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0610845 Jy
! Component: 100  -  total flux cleaned = 0.0762885 Jy
! Component: 150  -  total flux cleaned = 0.0877026 Jy
! Component: 200  -  total flux cleaned = 0.091648 Jy
! Total flux subtracted in 200 components = 0.091648 Jy
! Clean residual min=-0.007924 max=0.008663 Jy/beam
! Clean residual mean=-0.000016 rms=0.002807 Jy/beam
! Combined flux in latest and established models = 0.091648 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 57 model components to the UV plane model.
! The established model now contains 57 components and 0.091648 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=17.33 mas, bpa=-10.43 degrees
! Estimated noise=0.471199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135501 Jy
! Component: 100  -  total flux cleaned = 0.0177596 Jy
! Component: 150  -  total flux cleaned = 0.0190513 Jy
! Component: 200  -  total flux cleaned = 0.0189537 Jy
! Total flux subtracted in 200 components = 0.0189537 Jy
! Clean residual min=-0.002873 max=0.003139 Jy/beam
! Clean residual mean=-0.000012 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.110602 Jy
! Adding 84 model components to the UV plane model.
! The established model now contains 132 components and 0.110602 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=21.9 mas, bpa=-13.41 degrees
! Estimated noise=0.471832 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199823 Jy
! Component: 100  -  total flux cleaned = 0.00278113 Jy
! Component: 150  -  total flux cleaned = 0.00362971 Jy
! Component: 200  -  total flux cleaned = 0.00375469 Jy
! Total flux subtracted in 200 components = 0.00375469 Jy
! Clean residual min=-0.001509 max=0.001745 Jy/beam
! Clean residual mean=-0.000004 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.114356 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012358 Jy
! Component: 100  -  total flux cleaned = 0.0006489 Jy
! Component: 150  -  total flux cleaned = 0.00118189 Jy
! Component: 200  -  total flux cleaned = 0.00138052 Jy
! Total flux subtracted in 200 components = 0.00138052 Jy
! Clean residual min=-0.001156 max=0.001361 Jy/beam
! Clean residual mean=-0.000004 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.115737 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 215 components and 0.115737 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=17.33 mas, bpa=-10.43 degrees
! Estimated noise=0.471199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102084 Jy
! Component: 100  -  total flux cleaned = -0.00025379 Jy
! Component: 150  -  total flux cleaned = -0.000370237 Jy
! Component: 200  -  total flux cleaned = -0.000317304 Jy
! Total flux subtracted in 200 components = -0.000317304 Jy
! Clean residual min=-0.001579 max=0.001257 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.11542 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 260 components and 0.11542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104438Jy  sigma=1.117012
! Fit after  self-cal, rms=0.104397Jy  sigma=1.116736
wmodel J0649-4108_X_b_map.mod
! Writing 260 model components to file: J0649-4108_X_b_map.mod
wobs   J0649-4108_X_b_uvs.fits
! Writing UV FITS file: J0649-4108_X_b_uvs.fits
wwins  J0649-4108_X_b_map.win
! wwins: Wrote 5 windows to J0649-4108_X_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000617659 Jy
! Component: 100  -  total flux cleaned = -0.00107302 Jy
! Component: 150  -  total flux cleaned = -0.00140051 Jy
! Component: 200  -  total flux cleaned = -0.0016217 Jy
! Component: 250  -  total flux cleaned = -0.00178225 Jy
! Component: 300  -  total flux cleaned = -0.00190327 Jy
! Component: 350  -  total flux cleaned = -0.00200407 Jy
! Component: 400  -  total flux cleaned = -0.00206976 Jy
! Component: 450  -  total flux cleaned = -0.00211795 Jy
! Component: 500  -  total flux cleaned = -0.00214959 Jy
! Component: 550  -  total flux cleaned = -0.00214954 Jy
! Component: 600  -  total flux cleaned = -0.00204205 Jy
! Component: 650  -  total flux cleaned = -0.00198145 Jy
! Component: 700  -  total flux cleaned = -0.0019065 Jy
! Component: 750  -  total flux cleaned = -0.00181752 Jy
! Component: 800  -  total flux cleaned = -0.00174411 Jy
! Component: 850  -  total flux cleaned = -0.00167139 Jy
! Component: 900  -  total flux cleaned = -0.00164253 Jy
! Component: 950  -  total flux cleaned = -0.00164242 Jy
! Component: 1000  -  total flux cleaned = -0.0016279 Jy
! Component: 1050  -  total flux cleaned = -0.00158484 Jy
! Component: 1100  -  total flux cleaned = -0.00155605 Jy
! Component: 1150  -  total flux cleaned = -0.00151231 Jy
! Component: 1200  -  total flux cleaned = -0.0014977 Jy
! Component: 1250  -  total flux cleaned = -0.00146797 Jy
! Component: 1300  -  total flux cleaned = -0.00145291 Jy
! Component: 1350  -  total flux cleaned = -0.00142245 Jy
! Component: 1400  -  total flux cleaned = -0.00139143 Jy
! Component: 1450  -  total flux cleaned = -0.00139152 Jy
! Component: 1500  -  total flux cleaned = -0.00139136 Jy
! Component: 1550  -  total flux cleaned = -0.00139135 Jy
! Component: 1600  -  total flux cleaned = -0.00137441 Jy
! Component: 1650  -  total flux cleaned = -0.00139167 Jy
! Component: 1700  -  total flux cleaned = -0.00137394 Jy
! Component: 1750  -  total flux cleaned = -0.0013739 Jy
! Component: 1800  -  total flux cleaned = -0.00137403 Jy
! Component: 1850  -  total flux cleaned = -0.00137407 Jy
! Component: 1900  -  total flux cleaned = -0.00135373 Jy
! Component: 1950  -  total flux cleaned = -0.00135361 Jy
! Component: 2000  -  total flux cleaned = -0.00135358 Jy
! Component: 2050  -  total flux cleaned = -0.00135373 Jy
! Component: 2100  -  total flux cleaned = -0.0013307 Jy
! Component: 2150  -  total flux cleaned = -0.00133027 Jy
! Component: 2200  -  total flux cleaned = -0.00133013 Jy
! Component: 2250  -  total flux cleaned = -0.00133064 Jy
! Component: 2300  -  total flux cleaned = -0.00130425 Jy
! Component: 2350  -  total flux cleaned = -0.00130445 Jy
! Component: 2400  -  total flux cleaned = -0.00127518 Jy
! Component: 2450  -  total flux cleaned = -0.0012748 Jy
! Component: 2500  -  total flux cleaned = -0.00127538 Jy
! Component: 2550  -  total flux cleaned = -0.00124392 Jy
! Component: 2600  -  total flux cleaned = -0.00124377 Jy
! Component: 2650  -  total flux cleaned = -0.00124388 Jy
! Component: 2700  -  total flux cleaned = -0.00120737 Jy
! Component: 2750  -  total flux cleaned = -0.00120712 Jy
! Component: 2800  -  total flux cleaned = -0.00120746 Jy
! Component: 2850  -  total flux cleaned = -0.00120779 Jy
! Component: 2900  -  total flux cleaned = -0.00120817 Jy
! Component: 2950  -  total flux cleaned = -0.00120911 Jy
! Component: 3000  -  total flux cleaned = -0.00121005 Jy
! Component: 3050  -  total flux cleaned = -0.00121054 Jy
! Component: 3100  -  total flux cleaned = -0.00121129 Jy
! Component: 3150  -  total flux cleaned = -0.00121217 Jy
! Component: 3200  -  total flux cleaned = -0.00121341 Jy
! Component: 3250  -  total flux cleaned = -0.00121441 Jy
! Component: 3300  -  total flux cleaned = -0.00121533 Jy
! Component: 3350  -  total flux cleaned = -0.00121669 Jy
! Component: 3400  -  total flux cleaned = -0.00121728 Jy
! Component: 3450  -  total flux cleaned = -0.00121784 Jy
! Component: 3500  -  total flux cleaned = -0.00121857 Jy
! Component: 3550  -  total flux cleaned = -0.001219 Jy
! Component: 3600  -  total flux cleaned = -0.00121955 Jy
! Component: 3650  -  total flux cleaned = -0.00122022 Jy
! Component: 3700  -  total flux cleaned = -0.00122058 Jy
! Component: 3750  -  total flux cleaned = -0.0012209 Jy
! Component: 3800  -  total flux cleaned = -0.0012227 Jy
! Component: 3850  -  total flux cleaned = -0.00122305 Jy
! Component: 3900  -  total flux cleaned = -0.00112466 Jy
! Component: 3950  -  total flux cleaned = -0.00122628 Jy
! Component: 4000  -  total flux cleaned = -0.0012264 Jy
! Component: 4050  -  total flux cleaned = -0.00111455 Jy
! Total flux subtracted in 4096 components = -0.00111171 Jy
! Clean residual min=-0.006120 max=0.006222 Jy/beam
! Clean residual mean=-0.000005 rms=0.001251 Jy/beam
! Combined flux in latest and established models = 0.114308 Jy
keep
! Adding 159 model components to the UV plane model.
! The established model now contains 419 components and 0.114308 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0649-4108_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.398 x 17.33 at -10.43 degrees (North through East)
! Clean map  min=-0.00892  max=0.074952 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0649-4108_X_b_map.fits
wmodel /vlbi/uf001/uva//J0649-4108_X_b_map.mod
! Writing 419 model components to file: /vlbi/uf001/uva//J0649-4108_X_b_map.mod
wobs   /vlbi/uf001/uva//J0649-4108_X_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0649-4108_X_b_uvs.fits
wwins  /vlbi/uf001/uva//J0649-4108_X_b_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0649-4108_X_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0749518 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000980785 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.92566 3.92566 7.85133 15.7027 31.4053 62.8106
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.074 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  76.42 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0649-4108_X_b_dfm.log closed on Sun Jan 13 23:11:02 2019