! Started logfile: /vlbi/uf001/uva//J0649-4108_S_b_dfm.log on Sun Jan 13 23:10:43 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0649-4108_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0649-4108_S_b_uva.fits
! AN table 1: 74 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.998649 visibilities/baseline/integration-bin.
! Found source: J0649-4108
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2217 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0649-4108_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010614Jy  sigma=12.217476
! Fit after  self-cal, rms=0.870921Jy  sigma=10.276374
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.53 mas, bmaj=198.3 mas, bpa=-16.9 degrees
! Estimated noise=2.97776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100596 Jy
! Component: 100  -  total flux cleaned = 0.138552 Jy
! Total flux subtracted in 100 components = 0.138552 Jy
! Clean residual min=-0.020834 max=0.020896 Jy/beam
! Clean residual mean=-0.000563 rms=0.009849 Jy/beam
! Combined flux in latest and established models = 0.138552 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.138552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117532Jy  sigma=1.414302
! Fit after  self-cal, rms=0.117003Jy  sigma=1.405855
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.141 mas, bmaj=190.5 mas, bpa=-16.52 degrees
! Estimated noise=1.2933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0368645 Jy
! Component: 100  -  total flux cleaned = 0.0636828 Jy
! Component: 150  -  total flux cleaned = 0.0840976 Jy
! Component: 200  -  total flux cleaned = 0.0885498 Jy
! Total flux subtracted in 200 components = 0.0885498 Jy
! Clean residual min=-0.011690 max=0.011727 Jy/beam
! Clean residual mean=-0.000364 rms=0.005708 Jy/beam
! Combined flux in latest and established models = 0.227101 Jy
! Performing phase self-cal
! Adding 108 model components to the UV plane model.
! The established model now contains 140 components and 0.227101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099772Jy  sigma=1.150501
! Fit after  self-cal, rms=0.099035Jy  sigma=1.140347
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.141 x 190.5 at -16.52 degrees (North through East)
! Clean map  min=-0.013967  max=0.14667 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.95     LA        0.86     NL        1.13     OV        1.05     
!   PT        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.96     LA        0.89     NL        1.21     OV        0.86     
!   PT        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.94     LA        0.89     NL        1.00     OV        1.02     
!   PT        1.00     
! 
! 
! Fit before self-cal, rms=0.099035Jy  sigma=1.140347
! Fit after  self-cal, rms=0.093973Jy  sigma=1.100268
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.532 mas, bmaj=187.7 mas, bpa=-16.6 degrees
! Estimated noise=1.19816 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105418 Jy
! Component: 100  -  total flux cleaned = 0.0111001 Jy
! Component: 150  -  total flux cleaned = 0.0107714 Jy
! Component: 200  -  total flux cleaned = 0.0110771 Jy
! Total flux subtracted in 200 components = 0.0110771 Jy
! Clean residual min=-0.002483 max=0.002400 Jy/beam
! Clean residual mean=-0.000039 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.238178 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 201 components and 0.238178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092987Jy  sigma=1.082269
! Fit after  self-cal, rms=0.092870Jy  sigma=1.079847
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092870Jy  sigma=1.079847
! Fit after  self-cal, rms=0.092762Jy  sigma=1.079147
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.563 mas, bmaj=187.3 mas, bpa=-16.61 degrees
! Estimated noise=1.19197 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000974311 Jy
! Component: 100  -  total flux cleaned = 0.000641008 Jy
! Component: 150  -  total flux cleaned = 0.000571401 Jy
! Component: 200  -  total flux cleaned = 0.000381696 Jy
! Total flux subtracted in 200 components = 0.000381696 Jy
! Clean residual min=-0.000988 max=0.000991 Jy/beam
! Clean residual mean=-0.000003 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.23856 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 268 components and 0.23856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092604Jy  sigma=1.077526
! Fit after  self-cal, rms=0.092607Jy  sigma=1.077202
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120265 Jy
! Component: 100  -  total flux cleaned = 0.00150972 Jy
! Component: 150  -  total flux cleaned = 0.00167162 Jy
! Component: 200  -  total flux cleaned = 0.0017741 Jy
! Total flux subtracted in 200 components = 0.0017741 Jy
! Clean residual min=-0.000823 max=0.000832 Jy/beam
! Clean residual mean=-0.000002 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.240334 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 310 components and 0.240334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092517Jy  sigma=1.076492
! Fit after  self-cal, rms=0.092518Jy  sigma=1.076385
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092518Jy  sigma=1.076385
! Fit after  self-cal, rms=0.092421Jy  sigma=1.076361
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.557 mas, bmaj=187.4 mas, bpa=-16.6 degrees
! Estimated noise=1.19232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176504 Jy
! Component: 100  -  total flux cleaned = 0.000321411 Jy
! Component: 150  -  total flux cleaned = 0.00049613 Jy
! Component: 200  -  total flux cleaned = 0.000537834 Jy
! Total flux subtracted in 200 components = 0.000537834 Jy
! Clean residual min=-0.000707 max=0.000701 Jy/beam
! Clean residual mean=0.000001 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.240872 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 363 components and 0.240872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092367Jy  sigma=1.075944
! Fit after  self-cal, rms=0.092377Jy  sigma=1.075892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00010922 Jy
! Component: 100  -  total flux cleaned = -2.23132e-05 Jy
! Component: 150  -  total flux cleaned = -6.54794e-05 Jy
! Component: 200  -  total flux cleaned = 2.314e-05 Jy
! Total flux subtracted in 200 components = 2.314e-05 Jy
! Clean residual min=-0.000737 max=0.000736 Jy/beam
! Clean residual mean=-0.000002 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.240895 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 394 components and 0.240895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092340Jy  sigma=1.075611
! Fit after  self-cal, rms=0.092344Jy  sigma=1.075569
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092344Jy  sigma=1.075569
! Fit after  self-cal, rms=0.091654Jy  sigma=1.075532
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.05 mas, bmaj=181.3 mas, bpa=-16.81 degrees
! Estimated noise=1.16938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000356035 Jy
! Component: 100  -  total flux cleaned = -0.000385312 Jy
! Component: 150  -  total flux cleaned = -0.000384722 Jy
! Component: 200  -  total flux cleaned = -0.000354932 Jy
! Total flux subtracted in 200 components = -0.000354932 Jy
! Clean residual min=-0.000505 max=0.000500 Jy/beam
! Clean residual mean=0.000001 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.24054 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 435 components and 0.24054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091624Jy  sigma=1.075319
! Fit after  self-cal, rms=0.091626Jy  sigma=1.075297
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251463 Jy
! Component: 100  -  total flux cleaned = 0.000394621 Jy
! Component: 150  -  total flux cleaned = 0.000528236 Jy
! Component: 200  -  total flux cleaned = 0.000665332 Jy
! Total flux subtracted in 200 components = 0.000665332 Jy
! Clean residual min=-0.000461 max=0.000463 Jy/beam
! Clean residual mean=-0.000003 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.241205 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 462 components and 0.241205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091608Jy  sigma=1.075153
! Fit after  self-cal, rms=0.091610Jy  sigma=1.075125
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.536 mas, bmaj=187.5 mas, bpa=-16.6 degrees
! Estimated noise=1.18762 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.536 x 187.5 at -16.6 degrees (North through East)
! Clean map  min=-0.0057613  max=0.1385 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.851 mas, bmaj=193.7 mas, bpa=-16.95 degrees
! Estimated noise=2.78847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0910313 Jy
! Component: 100  -  total flux cleaned = 0.12554 Jy
! Component: 150  -  total flux cleaned = 0.147814 Jy
! Component: 200  -  total flux cleaned = 0.166981 Jy
! Total flux subtracted in 200 components = 0.166981 Jy
! Clean residual min=-0.012175 max=0.012447 Jy/beam
! Clean residual mean=-0.000377 rms=0.006023 Jy/beam
! Combined flux in latest and established models = 0.166981 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 86 model components to the UV plane model.
! The established model now contains 86 components and 0.166981 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.536 mas, bmaj=187.5 mas, bpa=-16.6 degrees
! Estimated noise=1.18762 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245088 Jy
! Component: 100  -  total flux cleaned = 0.038354 Jy
! Component: 150  -  total flux cleaned = 0.0416677 Jy
! Component: 200  -  total flux cleaned = 0.0437285 Jy
! Total flux subtracted in 200 components = 0.0437285 Jy
! Clean residual min=-0.008081 max=0.008175 Jy/beam
! Clean residual mean=-0.000214 rms=0.003422 Jy/beam
! Combined flux in latest and established models = 0.21071 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 161 components and 0.21071 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.05 mas, bmaj=181.3 mas, bpa=-16.81 degrees
! Estimated noise=1.16938 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00149736 Jy
! Component: 100  -  total flux cleaned = -0.0065464 Jy
! Component: 150  -  total flux cleaned = -0.0078905 Jy
! Component: 200  -  total flux cleaned = -0.00916854 Jy
! Total flux subtracted in 200 components = -0.00916854 Jy
! Clean residual min=-0.003500 max=0.003548 Jy/beam
! Clean residual mean=-0.000070 rms=0.001283 Jy/beam
! Combined flux in latest and established models = 0.201541 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000622523 Jy
! Component: 100  -  total flux cleaned = -0.000620068 Jy
! Component: 150  -  total flux cleaned = -0.000157472 Jy
! Component: 200  -  total flux cleaned = 0.000610447 Jy
! Total flux subtracted in 200 components = 0.000610447 Jy
! Clean residual min=-0.004420 max=0.004486 Jy/beam
! Clean residual mean=-0.000011 rms=0.001427 Jy/beam
! Combined flux in latest and established models = 0.202152 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 243 components and 0.202152 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.536 mas, bmaj=187.5 mas, bpa=-16.6 degrees
! Estimated noise=1.18762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135024 Jy
! Component: 100  -  total flux cleaned = 0.00137754 Jy
! Component: 150  -  total flux cleaned = 0.0013839 Jy
! Component: 200  -  total flux cleaned = 0.00162275 Jy
! Total flux subtracted in 200 components = 0.00162275 Jy
! Clean residual min=-0.001917 max=0.001965 Jy/beam
! Clean residual mean=0.000000 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.203774 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 267 components and 0.203774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091733Jy  sigma=1.076706
! Fit after  self-cal, rms=0.091679Jy  sigma=1.076241
wmodel J0649-4108_S_b_map.mod
! Writing 267 model components to file: J0649-4108_S_b_map.mod
wobs   J0649-4108_S_b_uvs.fits
! Writing UV FITS file: J0649-4108_S_b_uvs.fits
wwins  J0649-4108_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J0649-4108_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.536 x 187.5 at -16.6 degrees (North through East)
! Clean map  min=-0.014284  max=0.13012 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0649-4108_S_b_map.fits
wmodel /vlbi/uf001/uva//J0649-4108_S_b_map.mod
! Writing 267 model components to file: /vlbi/uf001/uva//J0649-4108_S_b_map.mod
wobs   /vlbi/uf001/uva//J0649-4108_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0649-4108_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0649-4108_S_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.130118 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000502206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.15788 1.15788 2.31577 4.63154 9.26308 18.5262 37.0523 74.1046
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.13 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  259.093 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0649-4108_S_b_dfm.log closed on Sun Jan 13 23:10:49 2019