! Started logfile: /vlbi/uf001/uva//J0648-4734_X_dfm.log on Sun Jan 13 23:10:30 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0648-4734_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0648-4734_X_uva.fits
! AN table 1: 73 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.99726 visibilities/baseline/integration-bin.
! Found source: J0648-4734
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 8736 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0648-4734_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004997Jy  sigma=16.815569
! Fit after  self-cal, rms=0.930722Jy  sigma=15.601891
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.034 mas, bmaj=25.84 mas, bpa=-0.5239 degrees
! Estimated noise=1.57251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562082 Jy
! Component: 100  -  total flux cleaned = 0.073492 Jy
! Total flux subtracted in 100 components = 0.073492 Jy
! Clean residual min=-0.014920 max=0.015059 Jy/beam
! Clean residual mean=0.000386 rms=0.006325 Jy/beam
! Combined flux in latest and established models = 0.073492 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.073492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089306Jy  sigma=1.448444
! Fit after  self-cal, rms=0.087970Jy  sigma=1.430459
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=28.93 mas, bpa=-2.076 degrees
! Estimated noise=0.458365 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168067 Jy
! Component: 100  -  total flux cleaned = 0.0256185 Jy
! Component: 150  -  total flux cleaned = 0.0314966 Jy
! Component: 200  -  total flux cleaned = 0.0363434 Jy
! Total flux subtracted in 200 components = 0.0363434 Jy
! Clean residual min=-0.006550 max=0.006547 Jy/beam
! Clean residual mean=0.000288 rms=0.003093 Jy/beam
! Combined flux in latest and established models = 0.109835 Jy
! Performing phase self-cal
! Adding 162 model components to the UV plane model.
! The established model now contains 213 components and 0.109835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079349Jy  sigma=1.282950
! Fit after  self-cal, rms=0.078400Jy  sigma=1.271610
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.479 x 28.93 at -2.076 degrees (North through East)
! Clean map  min=-0.015283  max=0.07337 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.08     LA        0.75     OV        1.32     
!   PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     KP        1.21     LA        0.72     OV        1.31     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.04     LA        0.77     OV        1.24     
!   PT        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.15     LA        0.73     OV        1.33     
!   PT        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        1.06     LA        0.73     OV        1.26     
!   PT        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.10     LA        0.74     OV        1.15     
!   PT        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.09     LA        0.75     OV        1.26     
!   PT        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.08     LA        0.76     OV        1.19     
!   PT        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        0.95     LA        0.78     OV        1.13     
!   PT        0.93     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.06     LA        0.77     OV        1.13     
!   PT        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        1.10     LA        0.71     OV        1.07     
!   PT        0.93     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.96     LA        0.88     OV        0.98     
!   PT        0.87     
! 
! 
! Fit before self-cal, rms=0.078400Jy  sigma=1.271610
! Fit after  self-cal, rms=0.075229Jy  sigma=1.225847
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.65 mas, bmaj=29.15 mas, bpa=-2.404 degrees
! Estimated noise=0.447461 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00239388 Jy
! Component: 100  -  total flux cleaned = 0.00310175 Jy
! Component: 150  -  total flux cleaned = 0.00350899 Jy
! Component: 200  -  total flux cleaned = 0.00386509 Jy
! Total flux subtracted in 200 components = 0.00386509 Jy
! Clean residual min=-0.001806 max=0.001813 Jy/beam
! Clean residual mean=0.000008 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.113701 Jy
! Performing phase self-cal
! Adding 135 model components to the UV plane model.
! The established model now contains 348 components and 0.113701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074495Jy  sigma=1.214241
! Fit after  self-cal, rms=0.074854Jy  sigma=1.206166
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074854Jy  sigma=1.206166
! Fit after  self-cal, rms=0.077015Jy  sigma=1.204023
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.692 mas, bmaj=29.32 mas, bpa=-2.534 degrees
! Estimated noise=0.454265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000702032 Jy
! Component: 100  -  total flux cleaned = -1.4007e-06 Jy
! Component: 150  -  total flux cleaned = 0.000351217 Jy
! Component: 200  -  total flux cleaned = 0.000367758 Jy
! Total flux subtracted in 200 components = 0.000367758 Jy
! Clean residual min=-0.001547 max=0.001568 Jy/beam
! Clean residual mean=-0.000009 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.114068 Jy
selfcal
! Performing phase self-cal
! Adding 133 model components to the UV plane model.
! The established model now contains 481 components and 0.114068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076509Jy  sigma=1.197009
! Fit after  self-cal, rms=0.076597Jy  sigma=1.194781
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000538435 Jy
! Component: 100  -  total flux cleaned = -0.000668591 Jy
! Component: 150  -  total flux cleaned = -0.000961933 Jy
! Component: 200  -  total flux cleaned = -0.00104909 Jy
! Total flux subtracted in 200 components = -0.00104909 Jy
! Clean residual min=-0.001365 max=0.001362 Jy/beam
! Clean residual mean=-0.000003 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.113019 Jy
! Performing phase self-cal
! Adding 131 model components to the UV plane model.
! The established model now contains 598 components and 0.113019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076249Jy  sigma=1.190220
! Fit after  self-cal, rms=0.076219Jy  sigma=1.189174
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076219Jy  sigma=1.189174
! Fit after  self-cal, rms=0.076407Jy  sigma=1.186831
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.714 mas, bmaj=29.42 mas, bpa=-2.574 degrees
! Estimated noise=0.452515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000389453 Jy
! Component: 100  -  total flux cleaned = -0.00113971 Jy
! Component: 150  -  total flux cleaned = -0.00145021 Jy
! Component: 200  -  total flux cleaned = -0.00185726 Jy
! Total flux subtracted in 200 components = -0.00185726 Jy
! Clean residual min=-0.001043 max=0.001058 Jy/beam
! Clean residual mean=-0.000004 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.111162 Jy
selfcal
! Performing phase self-cal
! Adding 125 model components to the UV plane model.
! The established model now contains 699 components and 0.111162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076189Jy  sigma=1.183822
! Fit after  self-cal, rms=0.076215Jy  sigma=1.182864
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000893195 Jy
! Component: 100  -  total flux cleaned = -0.00142438 Jy
! Component: 150  -  total flux cleaned = -0.00188799 Jy
! Component: 200  -  total flux cleaned = -0.00207113 Jy
! Total flux subtracted in 200 components = -0.00207113 Jy
! Clean residual min=-0.000896 max=0.000885 Jy/beam
! Clean residual mean=0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.109091 Jy
! Performing phase self-cal
! Adding 112 model components to the UV plane model.
! The established model now contains 787 components and 0.109091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076074Jy  sigma=1.181015
! Fit after  self-cal, rms=0.076017Jy  sigma=1.180374
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076017Jy  sigma=1.180374
! Fit after  self-cal, rms=0.075308Jy  sigma=1.180090
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.922 mas, bmaj=30.12 mas, bpa=-2.692 degrees
! Estimated noise=0.447411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.85692e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110523 Jy
! Component: 150  -  total flux cleaned = 3.9445e-05 Jy
! Component: 200  -  total flux cleaned = -4.45162e-06 Jy
! Total flux subtracted in 200 components = -4.45162e-06 Jy
! Clean residual min=-0.000745 max=0.000748 Jy/beam
! Clean residual mean=0.000008 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.109086 Jy
selfcal
! Performing phase self-cal
! Adding 115 model components to the UV plane model.
! The established model now contains 870 components and 0.109086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075213Jy  sigma=1.178779
! Fit after  self-cal, rms=0.075205Jy  sigma=1.178380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259394 Jy
! Component: 100  -  total flux cleaned = 0.000454549 Jy
! Component: 150  -  total flux cleaned = 0.00066697 Jy
! Component: 200  -  total flux cleaned = 0.000817114 Jy
! Total flux subtracted in 200 components = 0.000817114 Jy
! Clean residual min=-0.000598 max=0.000595 Jy/beam
! Clean residual mean=0.000007 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.109903 Jy
! Performing phase self-cal
! Adding 129 model components to the UV plane model.
! The established model now contains 959 components and 0.109904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075144Jy  sigma=1.177555
! Fit after  self-cal, rms=0.075130Jy  sigma=1.177419
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.721 mas, bmaj=29.47 mas, bpa=-2.578 degrees
! Estimated noise=0.448224 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.721 x 29.47 at -2.578 degrees (North through East)
! Clean map  min=-0.0071952  max=0.065444 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.26 mas, bmaj=25.96 mas, bpa=-1.124 degrees
! Estimated noise=1.57818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0533452 Jy
! Component: 100  -  total flux cleaned = 0.0713759 Jy
! Component: 150  -  total flux cleaned = 0.0796006 Jy
! Component: 200  -  total flux cleaned = 0.0833653 Jy
! Total flux subtracted in 200 components = 0.0833653 Jy
! Clean residual min=-0.008645 max=0.008663 Jy/beam
! Clean residual mean=0.000207 rms=0.003682 Jy/beam
! Combined flux in latest and established models = 0.0833653 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 129 model components to the UV plane model.
! The established model now contains 129 components and 0.0833653 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.721 mas, bmaj=29.47 mas, bpa=-2.578 degrees
! Estimated noise=0.448224 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768183 Jy
! Component: 100  -  total flux cleaned = 0.00693222 Jy
! Component: 150  -  total flux cleaned = 0.00660199 Jy
! Component: 200  -  total flux cleaned = 0.00612466 Jy
! Total flux subtracted in 200 components = 0.00612466 Jy
! Clean residual min=-0.003740 max=0.003739 Jy/beam
! Clean residual mean=0.000133 rms=0.001752 Jy/beam
! Combined flux in latest and established models = 0.08949 Jy
! Adding 112 model components to the UV plane model.
! The established model now contains 241 components and 0.08949 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.922 mas, bmaj=30.12 mas, bpa=-2.692 degrees
! Estimated noise=0.447411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000682842 Jy
! Component: 100  -  total flux cleaned = -0.000184019 Jy
! Component: 150  -  total flux cleaned = -0.000605073 Jy
! Component: 200  -  total flux cleaned = -0.000739028 Jy
! Total flux subtracted in 200 components = -0.000739028 Jy
! Clean residual min=-0.001863 max=0.001835 Jy/beam
! Clean residual mean=0.000067 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.0887509 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000633201 Jy
! Component: 100  -  total flux cleaned = -0.00118598 Jy
! Component: 150  -  total flux cleaned = -0.00126743 Jy
! Component: 200  -  total flux cleaned = -0.000988084 Jy
! Total flux subtracted in 200 components = -0.000988084 Jy
! Clean residual min=-0.001131 max=0.001131 Jy/beam
! Clean residual mean=0.000036 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0877629 Jy
! Adding 235 model components to the UV plane model.
! The established model now contains 458 components and 0.0877629 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.721 mas, bmaj=29.47 mas, bpa=-2.578 degrees
! Estimated noise=0.448224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000930808 Jy
! Component: 100  -  total flux cleaned = 0.00150201 Jy
! Component: 150  -  total flux cleaned = 0.00195327 Jy
! Component: 200  -  total flux cleaned = 0.00221784 Jy
! Total flux subtracted in 200 components = 0.00221784 Jy
! Clean residual min=-0.000698 max=0.000695 Jy/beam
! Clean residual mean=0.000021 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0899807 Jy
selfcal
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 553 components and 0.0899807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075121Jy  sigma=1.177652
! Fit after  self-cal, rms=0.075069Jy  sigma=1.177166
wmodel J0648-4734_X_map.mod
! Writing 553 model components to file: J0648-4734_X_map.mod
wobs   J0648-4734_X_uvs.fits
! Writing UV FITS file: J0648-4734_X_uvs.fits
wwins  J0648-4734_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J0648-4734_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.721 x 29.47 at -2.578 degrees (North through East)
! Clean map  min=-0.0096259  max=0.058025 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0648-4734_X_map.fits
wmodel /vlbi/uf001/uva//J0648-4734_X_map.mod
! Writing 553 model components to file: /vlbi/uf001/uva//J0648-4734_X_map.mod
wobs   /vlbi/uf001/uva//J0648-4734_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0648-4734_X_uvs.fits
wwins  /vlbi/uf001/uva//J0648-4734_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0580253 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000384037 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.98553 1.98553 3.97106 7.94213 15.8843 31.7685 63.537
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.058 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  151.092 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0648-4734_X_dfm.log closed on Sun Jan 13 23:10:35 2019