! Started logfile: /vlbi/uf001/uva//J0648-4734_S_dfm.log on Sun Jan 13 23:10:21 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0648-4734_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0648-4734_S_uva.fits
! AN table 1: 73 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.99726 visibilities/baseline/integration-bin.
! Found source: J0648-4734
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2184 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0648-4734_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.231157Jy  sigma=13.945000
! Fit after  self-cal, rms=0.435107Jy  sigma=5.139416
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.29 mas, bmaj=109.6 mas, bpa=-2.551 degrees
! Estimated noise=1.55978 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.493435 Jy
! Component: 100  -  total flux cleaned = 0.665937 Jy
! Total flux subtracted in 100 components = 0.665937 Jy
! Clean residual min=-0.074325 max=0.089001 Jy/beam
! Clean residual mean=-0.000905 rms=0.031413 Jy/beam
! Combined flux in latest and established models = 0.665937 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.665937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.301929Jy  sigma=3.150606
! Fit after  self-cal, rms=0.301117Jy  sigma=3.139889
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.48 mas, bmaj=114 mas, bpa=-1.964 degrees
! Estimated noise=1.33973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139106 Jy
! Component: 100  -  total flux cleaned = 0.195477 Jy
! Component: 150  -  total flux cleaned = 0.204003 Jy
! Component: 200  -  total flux cleaned = 0.197898 Jy
! Total flux subtracted in 200 components = 0.197898 Jy
! Clean residual min=-0.079105 max=0.090732 Jy/beam
! Clean residual mean=0.002478 rms=0.034694 Jy/beam
! Combined flux in latest and established models = 0.863835 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 76 components and 0.863835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.217202Jy  sigma=2.308860
! Fit after  self-cal, rms=0.215950Jy  sigma=2.295090
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.48 x 114 at -1.964 degrees (North through East)
! Clean map  min=-0.07876  max=0.70445 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        0.93     LA        1.04     OV        1.14     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        0.92     LA        1.09     OV        1.11     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        0.92     LA        1.07     OV        1.10     
!   PT        1.06     
! 
! 
! Fit before self-cal, rms=0.215950Jy  sigma=2.295090
! Fit after  self-cal, rms=0.193495Jy  sigma=2.114427
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.69 mas, bmaj=114.6 mas, bpa=-1.736 degrees
! Estimated noise=1.32606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0183667 Jy
! Component: 100  -  total flux cleaned = -0.0234637 Jy
! Component: 150  -  total flux cleaned = -0.0278142 Jy
! Component: 200  -  total flux cleaned = -0.0315954 Jy
! Total flux subtracted in 200 components = -0.0315954 Jy
! Clean residual min=-0.072448 max=0.083879 Jy/beam
! Clean residual mean=0.001497 rms=0.028333 Jy/beam
! Combined flux in latest and established models = 0.83224 Jy
! Performing phase self-cal
! Adding 70 model components to the UV plane model.
! The established model now contains 145 components and 0.83224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.188090Jy  sigma=2.071717
! Fit after  self-cal, rms=0.187990Jy  sigma=2.068590
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.187990Jy  sigma=2.068590
! Fit after  self-cal, rms=0.187036Jy  sigma=2.011744
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.6 mas, bmaj=114.6 mas, bpa=-1.666 degrees
! Estimated noise=1.34147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149977 Jy
! Component: 100  -  total flux cleaned = 0.0121129 Jy
! Component: 150  -  total flux cleaned = 0.00909901 Jy
! Component: 200  -  total flux cleaned = 0.0059203 Jy
! Total flux subtracted in 200 components = 0.0059203 Jy
! Clean residual min=-0.072315 max=0.079178 Jy/beam
! Clean residual mean=0.001392 rms=0.027003 Jy/beam
! Combined flux in latest and established models = 0.83816 Jy
selfcal
! Performing phase self-cal
! Adding 75 model components to the UV plane model.
! The established model now contains 216 components and 0.83816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.183089Jy  sigma=1.982711
! Fit after  self-cal, rms=0.183045Jy  sigma=1.981487
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00353963 Jy
! Component: 100  -  total flux cleaned = -0.006179 Jy
! Component: 150  -  total flux cleaned = -0.00789326 Jy
! Component: 200  -  total flux cleaned = -0.0101005 Jy
! Total flux subtracted in 200 components = -0.0101005 Jy
! Clean residual min=-0.070417 max=0.079394 Jy/beam
! Clean residual mean=0.001327 rms=0.026634 Jy/beam
! Combined flux in latest and established models = 0.828059 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 276 components and 0.828059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.181331Jy  sigma=1.971786
! Fit after  self-cal, rms=0.181234Jy  sigma=1.971209
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.181234Jy  sigma=1.971209
! Fit after  self-cal, rms=0.176876Jy  sigma=1.815922
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.57 mas, bmaj=116.3 mas, bpa=-1.64 degrees
! Estimated noise=1.33825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0182903 Jy
! Component: 100  -  total flux cleaned = -0.0248345 Jy
! Component: 150  -  total flux cleaned = -0.0270693 Jy
! Component: 200  -  total flux cleaned = -0.0291211 Jy
! Total flux subtracted in 200 components = -0.0291211 Jy
! Clean residual min=-0.066669 max=0.069653 Jy/beam
! Clean residual mean=0.001291 rms=0.023075 Jy/beam
! Combined flux in latest and established models = 0.798938 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 316 components and 0.798938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.173091Jy  sigma=1.785379
! Fit after  self-cal, rms=0.173063Jy  sigma=1.784677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00241139 Jy
! Component: 100  -  total flux cleaned = -0.00446108 Jy
! Component: 150  -  total flux cleaned = -0.00634282 Jy
! Component: 200  -  total flux cleaned = -0.00779079 Jy
! Total flux subtracted in 200 components = -0.00779079 Jy
! Clean residual min=-0.064420 max=0.069447 Jy/beam
! Clean residual mean=0.001244 rms=0.022714 Jy/beam
! Combined flux in latest and established models = 0.791148 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 366 components and 0.791148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.171588Jy  sigma=1.775151
! Fit after  self-cal, rms=0.171438Jy  sigma=1.774769
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.171438Jy  sigma=1.774769
! Fit after  self-cal, rms=0.169836Jy  sigma=1.764147
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.17 mas, bmaj=119.5 mas, bpa=-1.759 degrees
! Estimated noise=1.34445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0133474 Jy
! Component: 100  -  total flux cleaned = -0.0163508 Jy
! Component: 150  -  total flux cleaned = -0.0189823 Jy
! Component: 200  -  total flux cleaned = -0.0210074 Jy
! Total flux subtracted in 200 components = -0.0210074 Jy
! Clean residual min=-0.066083 max=0.067621 Jy/beam
! Clean residual mean=0.001290 rms=0.022660 Jy/beam
! Combined flux in latest and established models = 0.77014 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 396 components and 0.770141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.167552Jy  sigma=1.749987
! Fit after  self-cal, rms=0.167439Jy  sigma=1.749543
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00246353 Jy
! Component: 100  -  total flux cleaned = -0.00386979 Jy
! Component: 150  -  total flux cleaned = -0.00516578 Jy
! Component: 200  -  total flux cleaned = -0.00637133 Jy
! Total flux subtracted in 200 components = -0.00637133 Jy
! Clean residual min=-0.064286 max=0.067435 Jy/beam
! Clean residual mean=0.001258 rms=0.022370 Jy/beam
! Combined flux in latest and established models = 0.763769 Jy
! Performing phase self-cal
! Adding 75 model components to the UV plane model.
! The established model now contains 445 components and 0.763769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166354Jy  sigma=1.744522
! Fit after  self-cal, rms=0.166220Jy  sigma=1.744190
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=13.58 mas, bmaj=117.2 mas, bpa=-1.662 degrees
! Estimated noise=1.33661 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.58 x 117.2 at -1.662 degrees (North through East)
! Clean map  min=-0.071206  max=0.70641 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166220Jy  sigma=1.744190
! Fit after  self-cal, rms=0.160287Jy  sigma=1.629352
! Inverting map and beam 
! Estimated beam: bmin=13.57 mas, bmaj=117.8 mas, bpa=-1.7 degrees
! Estimated noise=1.33551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00732547 Jy
! Component: 100  -  total flux cleaned = -0.0111926 Jy
! Component: 150  -  total flux cleaned = -0.0143228 Jy
! Component: 200  -  total flux cleaned = -0.0158447 Jy
! Total flux subtracted in 200 components = -0.0158447 Jy
! Clean residual min=-0.061232 max=0.062569 Jy/beam
! Clean residual mean=0.001043 rms=0.020650 Jy/beam
! Combined flux in latest and established models = 0.747925 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 468 components and 0.747925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.158616Jy  sigma=1.622370
! Fit after  self-cal, rms=0.158526Jy  sigma=1.622186
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00122148 Jy
! Component: 100  -  total flux cleaned = -0.00230827 Jy
! Component: 150  -  total flux cleaned = -0.0035255 Jy
! Component: 200  -  total flux cleaned = -0.00447937 Jy
! Total flux subtracted in 200 components = -0.00447937 Jy
! Clean residual min=-0.060222 max=0.062495 Jy/beam
! Clean residual mean=0.001019 rms=0.020512 Jy/beam
! Combined flux in latest and established models = 0.743445 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 499 components and 0.743445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157687Jy  sigma=1.619288
! Fit after  self-cal, rms=0.157592Jy  sigma=1.619086
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157592Jy  sigma=1.619086
! Fit after  self-cal, rms=0.158551Jy  sigma=1.615515
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.43 mas, bmaj=114.5 mas, bpa=-2.228 degrees
! Estimated noise=1.5887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.500904 Jy
! Component: 100  -  total flux cleaned = 0.671528 Jy
! Component: 150  -  total flux cleaned = 0.75842 Jy
! Component: 200  -  total flux cleaned = 0.788122 Jy
! Total flux subtracted in 200 components = 0.788122 Jy
! Clean residual min=-0.073817 max=0.056781 Jy/beam
! Clean residual mean=0.000355 rms=0.024739 Jy/beam
! Combined flux in latest and established models = 0.788122 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 69 model components to the UV plane model.
! The established model now contains 69 components and 0.788122 Jy
! Inverting map and beam 
! Estimated beam: bmin=13.58 mas, bmaj=118.3 mas, bpa=-1.716 degrees
! Estimated noise=1.33896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334812 Jy
! Component: 100  -  total flux cleaned = 0.0319429 Jy
! Component: 150  -  total flux cleaned = 0.0236274 Jy
! Component: 200  -  total flux cleaned = 0.0151286 Jy
! Total flux subtracted in 200 components = 0.0151286 Jy
! Clean residual min=-0.071331 max=0.063989 Jy/beam
! Clean residual mean=0.001496 rms=0.023913 Jy/beam
! Combined flux in latest and established models = 0.803251 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 130 components and 0.803251 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.17 mas, bmaj=120.5 mas, bpa=-1.802 degrees
! Estimated noise=1.34683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00912508 Jy
! Component: 100  -  total flux cleaned = -0.0160608 Jy
! Component: 150  -  total flux cleaned = -0.0242661 Jy
! Component: 200  -  total flux cleaned = -0.0314712 Jy
! Total flux subtracted in 200 components = -0.0314712 Jy
! Clean residual min=-0.068882 max=0.063868 Jy/beam
! Clean residual mean=0.001358 rms=0.022823 Jy/beam
! Combined flux in latest and established models = 0.771779 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00477998 Jy
! Component: 100  -  total flux cleaned = -0.0098308 Jy
! Component: 150  -  total flux cleaned = -0.013718 Jy
! Component: 200  -  total flux cleaned = -0.0177963 Jy
! Total flux subtracted in 200 components = -0.0177963 Jy
! Clean residual min=-0.065726 max=0.062866 Jy/beam
! Clean residual mean=0.001197 rms=0.021955 Jy/beam
! Combined flux in latest and established models = 0.753983 Jy
! Adding 123 model components to the UV plane model.
! The established model now contains 235 components and 0.753983 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=13.58 mas, bmaj=118.3 mas, bpa=-1.716 degrees
! Estimated noise=1.33896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134842 Jy
! Component: 100  -  total flux cleaned = -0.00354339 Jy
! Component: 150  -  total flux cleaned = -0.00599268 Jy
! Component: 200  -  total flux cleaned = -0.00823159 Jy
! Total flux subtracted in 200 components = -0.00823159 Jy
! Clean residual min=-0.061365 max=0.061469 Jy/beam
! Clean residual mean=0.001099 rms=0.020725 Jy/beam
! Combined flux in latest and established models = 0.745752 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 296 components and 0.745752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.161200Jy  sigma=1.641575
! Fit after  self-cal, rms=0.161170Jy  sigma=1.639158
wmodel J0648-4734_S_map.mod
! Writing 296 model components to file: J0648-4734_S_map.mod
wobs   J0648-4734_S_uvs.fits
! Writing UV FITS file: J0648-4734_S_uvs.fits
wwins  J0648-4734_S_map.win
! wwins: Wrote 1 windows to J0648-4734_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120558 Jy
! Component: 100  -  total flux cleaned = -0.0045038 Jy
! Component: 150  -  total flux cleaned = -0.00672027 Jy
! Component: 200  -  total flux cleaned = -0.00733966 Jy
! Component: 250  -  total flux cleaned = -0.00792603 Jy
! Component: 300  -  total flux cleaned = -0.00847273 Jy
! Component: 350  -  total flux cleaned = -0.00848026 Jy
! Component: 400  -  total flux cleaned = -0.00894801 Jy
! Component: 450  -  total flux cleaned = -0.0102321 Jy
! Component: 500  -  total flux cleaned = -0.0117936 Jy
! Component: 550  -  total flux cleaned = -0.0128835 Jy
! Component: 600  -  total flux cleaned = -0.0139152 Jy
! Component: 650  -  total flux cleaned = -0.0142302 Jy
! Component: 700  -  total flux cleaned = -0.0145354 Jy
! Component: 750  -  total flux cleaned = -0.0150935 Jy
! Component: 800  -  total flux cleaned = -0.0150926 Jy
! Component: 850  -  total flux cleaned = -0.0161119 Jy
! Component: 900  -  total flux cleaned = -0.0175914 Jy
! Component: 950  -  total flux cleaned = -0.0190341 Jy
! Component: 1000  -  total flux cleaned = -0.0206807 Jy
! Component: 1050  -  total flux cleaned = -0.0220682 Jy
! Component: 1100  -  total flux cleaned = -0.0225236 Jy
! Component: 1150  -  total flux cleaned = -0.0225266 Jy
! Component: 1200  -  total flux cleaned = -0.0227546 Jy
! Component: 1250  -  total flux cleaned = -0.0229817 Jy
! Component: 1300  -  total flux cleaned = -0.0234307 Jy
! Component: 1350  -  total flux cleaned = -0.0238836 Jy
! Component: 1400  -  total flux cleaned = -0.0243331 Jy
! Component: 1450  -  total flux cleaned = -0.0247854 Jy
! Component: 1500  -  total flux cleaned = -0.0252405 Jy
! Component: 1550  -  total flux cleaned = -0.0259209 Jy
! Component: 1600  -  total flux cleaned = -0.0259283 Jy
! Component: 1650  -  total flux cleaned = -0.0259289 Jy
! Component: 1700  -  total flux cleaned = -0.0261631 Jy
! Component: 1750  -  total flux cleaned = -0.0259116 Jy
! Component: 1800  -  total flux cleaned = -0.0254033 Jy
! Component: 1850  -  total flux cleaned = -0.0248806 Jy
! Component: 1900  -  total flux cleaned = -0.024073 Jy
! Component: 1950  -  total flux cleaned = -0.0229595 Jy
! Component: 2000  -  total flux cleaned = -0.022088 Jy
! Component: 2050  -  total flux cleaned = -0.0211847 Jy
! Component: 2100  -  total flux cleaned = -0.0202517 Jy
! Component: 2150  -  total flux cleaned = -0.0196112 Jy
! Component: 2200  -  total flux cleaned = -0.0182871 Jy
! Component: 2250  -  total flux cleaned = -0.0172495 Jy
! Component: 2300  -  total flux cleaned = -0.0161732 Jy
! Component: 2350  -  total flux cleaned = -0.0150612 Jy
! Component: 2400  -  total flux cleaned = -0.0139082 Jy
! Component: 2450  -  total flux cleaned = -0.0123131 Jy
! Component: 2500  -  total flux cleaned = -0.0110646 Jy
! Component: 2550  -  total flux cleaned = -0.00977265 Jy
! Component: 2600  -  total flux cleaned = -0.00843698 Jy
! Component: 2650  -  total flux cleaned = -0.00705327 Jy
! Component: 2700  -  total flux cleaned = -0.00562245 Jy
! Component: 2750  -  total flux cleaned = -0.00413487 Jy
! Component: 2800  -  total flux cleaned = -0.00310916 Jy
! Component: 2850  -  total flux cleaned = -0.00205165 Jy
! Component: 2900  -  total flux cleaned = -0.000387152 Jy
! Component: 2950  -  total flux cleaned = 0.000191631 Jy
! Component: 3000  -  total flux cleaned = 0.00198119 Jy
! Component: 3050  -  total flux cleaned = 0.00323518 Jy
! Component: 3100  -  total flux cleaned = 0.00452466 Jy
! Component: 3150  -  total flux cleaned = 0.00587107 Jy
! Component: 3200  -  total flux cleaned = 0.00657011 Jy
! Component: 3250  -  total flux cleaned = 0.00729222 Jy
! Component: 3300  -  total flux cleaned = 0.00878635 Jy
! Component: 3350  -  total flux cleaned = 0.00954271 Jy
! Component: 3400  -  total flux cleaned = 0.010344 Jy
! Component: 3450  -  total flux cleaned = 0.0120006 Jy
! Component: 3500  -  total flux cleaned = 0.0137535 Jy
! Component: 3550  -  total flux cleaned = 0.0146869 Jy
! Component: 3600  -  total flux cleaned = 0.0165853 Jy
! Component: 3650  -  total flux cleaned = 0.0175551 Jy
! Component: 3700  -  total flux cleaned = 0.020586 Jy
! Component: 3750  -  total flux cleaned = 0.0227074 Jy
! Component: 3800  -  total flux cleaned = 0.0249063 Jy
! Component: 3850  -  total flux cleaned = 0.0271895 Jy
! Component: 3900  -  total flux cleaned = 0.0295637 Jy
! Component: 3950  -  total flux cleaned = 0.032028 Jy
! Component: 4000  -  total flux cleaned = 0.0345667 Jy
! Component: 4050  -  total flux cleaned = 0.0358858 Jy
! Total flux subtracted in 4096 components = 0.0372579 Jy
! Clean residual min=-0.076091 max=0.093675 Jy/beam
! Clean residual mean=0.000067 rms=0.026138 Jy/beam
! Combined flux in latest and established models = 0.783009 Jy
keep
! Adding 411 model components to the UV plane model.
! The established model now contains 707 components and 0.783009 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0648-4734_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.58 x 118.3 at -1.716 degrees (North through East)
! Clean map  min=-0.13552  max=0.69539 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0648-4734_S_map.fits
wmodel /vlbi/uf001/uva//J0648-4734_S_map.mod
! Writing 707 model components to file: /vlbi/uf001/uva//J0648-4734_S_map.mod
wobs   /vlbi/uf001/uva//J0648-4734_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0648-4734_S_uvs.fits
wwins  /vlbi/uf001/uva//J0648-4734_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0648-4734_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.69539 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.028721 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -12.3906 12.3906 24.7811 49.5623 99.1246
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0861 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.695 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  24.211 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0648-4734_S_dfm.log closed on Sun Jan 13 23:10:29 2019