! Started logfile: /vlbi/uf001/uva//J0641-0320_S_dfm.log on Sun Jan 13 23:06:24 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0641-0320_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0641-0320_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.964912 visibilities/baseline/integration-bin.
! Found source: J0641-0320
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7425 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0641-0320_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.123770Jy  sigma=20.561789
! Fit after  self-cal, rms=0.513538Jy  sigma=9.783857
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.59 mas, bmaj=6.73 mas, bpa=-5.192 degrees
! Estimated noise=0.601761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.36936 Jy
! Component: 100  -  total flux cleaned = 0.464413 Jy
! Total flux subtracted in 100 components = 0.464413 Jy
! Clean residual min=-0.019393 max=0.051709 Jy/beam
! Clean residual mean=0.000032 rms=0.005488 Jy/beam
! Combined flux in latest and established models = 0.464413 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.464413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.178311Jy  sigma=2.585578
! Fit after  self-cal, rms=0.178074Jy  sigma=2.577120
! Inverting map 
! Added new window around map position (-3.5, -2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0555538 Jy
! Component: 100  -  total flux cleaned = 0.0889282 Jy
! Total flux subtracted in 100 components = 0.0889282 Jy
! Clean residual min=-0.014296 max=0.025388 Jy/beam
! Clean residual mean=0.000016 rms=0.003744 Jy/beam
! Combined flux in latest and established models = 0.553341 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 22 components and 0.553341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.147349Jy  sigma=1.966723
! Fit after  self-cal, rms=0.146524Jy  sigma=1.941270
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0259719 Jy
! Component: 100  -  total flux cleaned = 0.0428356 Jy
! Total flux subtracted in 100 components = 0.0428356 Jy
! Clean residual min=-0.012411 max=0.016075 Jy/beam
! Clean residual mean=0.000009 rms=0.003061 Jy/beam
! Combined flux in latest and established models = 0.596176 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.596176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137758Jy  sigma=1.771256
! Fit after  self-cal, rms=0.137420Jy  sigma=1.759921
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.154 mas, bmaj=7.761 mas, bpa=-4.198 degrees
! Estimated noise=0.45422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209016 Jy
! Component: 100  -  total flux cleaned = 0.0338783 Jy
! Component: 150  -  total flux cleaned = 0.0428918 Jy
! Component: 200  -  total flux cleaned = 0.0493488 Jy
! Total flux subtracted in 200 components = 0.0493488 Jy
! Clean residual min=-0.010969 max=0.014384 Jy/beam
! Clean residual mean=0.000006 rms=0.002988 Jy/beam
! Combined flux in latest and established models = 0.645525 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.645525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132772Jy  sigma=1.672565
! Fit after  self-cal, rms=0.132602Jy  sigma=1.666714
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.154 x 7.761 at -4.198 degrees (North through East)
! Clean map  min=-0.0106  max=0.4839 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.02     KP        1.01     
!   LA        0.96     MK        1.01     NL        1.03     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        0.96     HN        1.02     KP        1.03     
!   LA        0.95     MK        0.98     NL        1.05     OV        0.97     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     HN        1.01     KP        1.03     
!   LA        0.95     MK        1.01     NL        1.05     OV        0.98     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.132602Jy  sigma=1.666714
! Fit after  self-cal, rms=0.163788Jy  sigma=1.553280
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.147 mas, bmaj=7.793 mas, bpa=-3.991 degrees
! Estimated noise=0.455556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286552 Jy
! Component: 100  -  total flux cleaned = 0.00321435 Jy
! Component: 150  -  total flux cleaned = 0.00320859 Jy
! Component: 200  -  total flux cleaned = 0.0029689 Jy
! Total flux subtracted in 200 components = 0.0029689 Jy
! Clean residual min=-0.009290 max=0.009544 Jy/beam
! Clean residual mean=-0.000016 rms=0.002380 Jy/beam
! Combined flux in latest and established models = 0.648494 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.648494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.162975Jy  sigma=1.547278
! Fit after  self-cal, rms=0.162980Jy  sigma=1.545812
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.162980Jy  sigma=1.545812
! Fit after  self-cal, rms=0.139102Jy  sigma=1.461349
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.138 mas, bmaj=7.792 mas, bpa=-3.962 degrees
! Estimated noise=0.458114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00453087 Jy
! Component: 100  -  total flux cleaned = 0.00540774 Jy
! Component: 150  -  total flux cleaned = 0.00552905 Jy
! Component: 200  -  total flux cleaned = 0.00523529 Jy
! Total flux subtracted in 200 components = 0.00523529 Jy
! Clean residual min=-0.010160 max=0.008112 Jy/beam
! Clean residual mean=-0.000019 rms=0.002058 Jy/beam
! Combined flux in latest and established models = 0.653729 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.653729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138360Jy  sigma=1.458112
! Fit after  self-cal, rms=0.138379Jy  sigma=1.457390
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000262138 Jy
! Component: 100  -  total flux cleaned = -0.00016715 Jy
! Component: 150  -  total flux cleaned = -0.000314262 Jy
! Component: 200  -  total flux cleaned = -0.00051373 Jy
! Total flux subtracted in 200 components = -0.00051373 Jy
! Clean residual min=-0.010089 max=0.008029 Jy/beam
! Clean residual mean=-0.000018 rms=0.002045 Jy/beam
! Combined flux in latest and established models = 0.653215 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 76 components and 0.653216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138152Jy  sigma=1.456216
! Fit after  self-cal, rms=0.138150Jy  sigma=1.455900
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138150Jy  sigma=1.455900
! Fit after  self-cal, rms=0.076059Jy  sigma=1.185135
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.142 mas, bmaj=7.777 mas, bpa=-4.004 degrees
! Estimated noise=0.457863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00049033 Jy
! Component: 100  -  total flux cleaned = -0.000488774 Jy
! Component: 150  -  total flux cleaned = -0.000742534 Jy
! Component: 200  -  total flux cleaned = -0.000899854 Jy
! Total flux subtracted in 200 components = -0.000899854 Jy
! Clean residual min=-0.002799 max=0.003310 Jy/beam
! Clean residual mean=-0.000003 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.652316 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 85 components and 0.652316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075833Jy  sigma=1.181883
! Fit after  self-cal, rms=0.075797Jy  sigma=1.181125
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.5, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216447 Jy
! Component: 100  -  total flux cleaned = 0.00224554 Jy
! Component: 150  -  total flux cleaned = 0.00224312 Jy
! Component: 200  -  total flux cleaned = 0.0022395 Jy
! Total flux subtracted in 200 components = 0.0022395 Jy
! Clean residual min=-0.002611 max=0.002412 Jy/beam
! Clean residual mean=-0.000004 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.654555 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 103 components and 0.654555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075668Jy  sigma=1.178360
! Fit after  self-cal, rms=0.075663Jy  sigma=1.178241
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075663Jy  sigma=1.178241
! Fit after  self-cal, rms=0.075762Jy  sigma=1.177922
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.075 mas, bmaj=12.58 mas, bpa=-6.085 degrees
! Estimated noise=0.613457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000373762 Jy
! Component: 100  -  total flux cleaned = 0.000465879 Jy
! Component: 150  -  total flux cleaned = 0.000429326 Jy
! Component: 200  -  total flux cleaned = 0.000430429 Jy
! Total flux subtracted in 200 components = 0.000430429 Jy
! Clean residual min=-0.003125 max=0.003062 Jy/beam
! Clean residual mean=-0.000008 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.654986 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 115 components and 0.654986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075721Jy  sigma=1.177451
! Fit after  self-cal, rms=0.075720Jy  sigma=1.177379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.05564e-05 Jy
! Component: 100  -  total flux cleaned = 2.92171e-05 Jy
! Component: 150  -  total flux cleaned = 5.25258e-05 Jy
! Component: 200  -  total flux cleaned = 7.4262e-05 Jy
! Total flux subtracted in 200 components = 7.4262e-05 Jy
! Clean residual min=-0.003072 max=0.003074 Jy/beam
! Clean residual mean=-0.000008 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.65506 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 124 components and 0.65506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075701Jy  sigma=1.177179
! Fit after  self-cal, rms=0.075700Jy  sigma=1.177132
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=7.779 mas, bpa=-4.024 degrees
! Estimated noise=0.458169 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.141 x 7.779 at -4.024 degrees (North through East)
! Clean map  min=-0.0025501  max=0.48689 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.577 mas, bmaj=6.713 mas, bpa=-4.86 degrees
! Estimated noise=0.60559 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.369959 Jy
! Component: 100  -  total flux cleaned = 0.479058 Jy
! Component: 150  -  total flux cleaned = 0.536741 Jy
! Component: 200  -  total flux cleaned = 0.573356 Jy
! Total flux subtracted in 200 components = 0.573356 Jy
! Clean residual min=-0.008131 max=0.019570 Jy/beam
! Clean residual mean=0.000013 rms=0.002182 Jy/beam
! Combined flux in latest and established models = 0.573356 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.573356 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=7.779 mas, bpa=-4.024 degrees
! Estimated noise=0.458169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0326182 Jy
! Component: 100  -  total flux cleaned = 0.0504042 Jy
! Component: 150  -  total flux cleaned = 0.0605439 Jy
! Component: 200  -  total flux cleaned = 0.0669081 Jy
! Total flux subtracted in 200 components = 0.0669081 Jy
! Clean residual min=-0.003448 max=0.003840 Jy/beam
! Clean residual mean=0.000002 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.640264 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 47 components and 0.640264 Jy
! Inverting map 
! Added new window around map position (4, 4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438956 Jy
! Component: 100  -  total flux cleaned = 0.00750503 Jy
! Component: 150  -  total flux cleaned = 0.00977455 Jy
! Component: 200  -  total flux cleaned = 0.0111663 Jy
! Total flux subtracted in 200 components = 0.0111663 Jy
! Clean residual min=-0.002850 max=0.002589 Jy/beam
! Clean residual mean=-0.000002 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.65143 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 72 components and 0.65143 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.075 mas, bmaj=12.58 mas, bpa=-6.085 degrees
! Estimated noise=0.613457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174876 Jy
! Component: 100  -  total flux cleaned = 0.00265114 Jy
! Component: 150  -  total flux cleaned = 0.00291846 Jy
! Component: 200  -  total flux cleaned = 0.00313918 Jy
! Total flux subtracted in 200 components = 0.00313918 Jy
! Clean residual min=-0.003113 max=0.003015 Jy/beam
! Clean residual mean=-0.000007 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.654569 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185868 Jy
! Component: 100  -  total flux cleaned = 0.000325054 Jy
! Component: 150  -  total flux cleaned = 0.000377676 Jy
! Component: 200  -  total flux cleaned = 0.000410475 Jy
! Total flux subtracted in 200 components = 0.000410475 Jy
! Clean residual min=-0.003102 max=0.003051 Jy/beam
! Clean residual mean=-0.000008 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.65498 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 103 components and 0.65498 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=7.779 mas, bpa=-4.024 degrees
! Estimated noise=0.458169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000917739 Jy
! Component: 100  -  total flux cleaned = -0.000793649 Jy
! Component: 150  -  total flux cleaned = -0.000609511 Jy
! Component: 200  -  total flux cleaned = -0.000543027 Jy
! Total flux subtracted in 200 components = -0.000543027 Jy
! Clean residual min=-0.002618 max=0.002390 Jy/beam
! Clean residual mean=-0.000003 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.654437 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 124 components and 0.654437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075639Jy  sigma=1.175919
! Fit after  self-cal, rms=0.075622Jy  sigma=1.175626
wmodel J0641-0320_S_map.mod
! Writing 124 model components to file: J0641-0320_S_map.mod
wobs   J0641-0320_S_uvs.fits
! Writing UV FITS file: J0641-0320_S_uvs.fits
wwins  J0641-0320_S_map.win
! wwins: Wrote 4 windows to J0641-0320_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000686782 Jy
! Component: 100  -  total flux cleaned = -0.000262904 Jy
! Component: 150  -  total flux cleaned = 1.6202e-05 Jy
! Component: 200  -  total flux cleaned = 0.000204416 Jy
! Component: 250  -  total flux cleaned = 0.000276574 Jy
! Component: 300  -  total flux cleaned = 0.000415749 Jy
! Component: 350  -  total flux cleaned = 0.000381464 Jy
! Component: 400  -  total flux cleaned = 0.000381613 Jy
! Component: 450  -  total flux cleaned = 0.000382292 Jy
! Component: 500  -  total flux cleaned = 0.000413952 Jy
! Component: 550  -  total flux cleaned = 0.000474907 Jy
! Component: 600  -  total flux cleaned = 0.000594293 Jy
! Component: 650  -  total flux cleaned = 0.000769727 Jy
! Component: 700  -  total flux cleaned = 0.000913052 Jy
! Component: 750  -  total flux cleaned = 0.000997063 Jy
! Component: 800  -  total flux cleaned = 0.00105214 Jy
! Component: 850  -  total flux cleaned = 0.00116051 Jy
! Component: 900  -  total flux cleaned = 0.00121357 Jy
! Component: 950  -  total flux cleaned = 0.0012135 Jy
! Component: 1000  -  total flux cleaned = 0.00123905 Jy
! Component: 1050  -  total flux cleaned = 0.00121353 Jy
! Component: 1100  -  total flux cleaned = 0.00121327 Jy
! Component: 1150  -  total flux cleaned = 0.001238 Jy
! Component: 1200  -  total flux cleaned = 0.00118902 Jy
! Component: 1250  -  total flux cleaned = 0.00121309 Jy
! Component: 1300  -  total flux cleaned = 0.0011657 Jy
! Component: 1350  -  total flux cleaned = 0.00116595 Jy
! Component: 1400  -  total flux cleaned = 0.00114287 Jy
! Component: 1450  -  total flux cleaned = 0.00114347 Jy
! Component: 1500  -  total flux cleaned = 0.00107576 Jy
! Component: 1550  -  total flux cleaned = 0.00112044 Jy
! Component: 1600  -  total flux cleaned = 0.00107638 Jy
! Component: 1650  -  total flux cleaned = 0.000989112 Jy
! Component: 1700  -  total flux cleaned = 0.00098939 Jy
! Component: 1750  -  total flux cleaned = 0.00105354 Jy
! Component: 1800  -  total flux cleaned = 0.000989931 Jy
! Component: 1850  -  total flux cleaned = 0.000927232 Jy
! Component: 1900  -  total flux cleaned = 0.000947759 Jy
! Component: 1950  -  total flux cleaned = 0.000947564 Jy
! Component: 2000  -  total flux cleaned = 0.000886921 Jy
! Component: 2050  -  total flux cleaned = 0.000887029 Jy
! Component: 2100  -  total flux cleaned = 0.000926577 Jy
! Component: 2150  -  total flux cleaned = 0.000907114 Jy
! Component: 2200  -  total flux cleaned = 0.000984892 Jy
! Component: 2250  -  total flux cleaned = 0.00102322 Jy
! Component: 2300  -  total flux cleaned = 0.00102312 Jy
! Component: 2350  -  total flux cleaned = 0.000985049 Jy
! Component: 2400  -  total flux cleaned = 0.00102265 Jy
! Component: 2450  -  total flux cleaned = 0.00109679 Jy
! Component: 2500  -  total flux cleaned = 0.00107841 Jy
! Component: 2550  -  total flux cleaned = 0.00111494 Jy
! Component: 2600  -  total flux cleaned = 0.00111486 Jy
! Component: 2650  -  total flux cleaned = 0.00115077 Jy
! Component: 2700  -  total flux cleaned = 0.00113301 Jy
! Component: 2750  -  total flux cleaned = 0.00120384 Jy
! Component: 2800  -  total flux cleaned = 0.00125652 Jy
! Component: 2850  -  total flux cleaned = 0.00134349 Jy
! Component: 2900  -  total flux cleaned = 0.00142944 Jy
! Component: 2950  -  total flux cleaned = 0.0014979 Jy
! Component: 3000  -  total flux cleaned = 0.00146385 Jy
! Component: 3050  -  total flux cleaned = 0.00159877 Jy
! Component: 3100  -  total flux cleaned = 0.00164928 Jy
! Component: 3150  -  total flux cleaned = 0.00183226 Jy
! Component: 3200  -  total flux cleaned = 0.00193137 Jy
! Component: 3250  -  total flux cleaned = 0.00193144 Jy
! Component: 3300  -  total flux cleaned = 0.00201298 Jy
! Component: 3350  -  total flux cleaned = 0.00206159 Jy
! Component: 3400  -  total flux cleaned = 0.00215799 Jy
! Component: 3450  -  total flux cleaned = 0.00220605 Jy
! Component: 3500  -  total flux cleaned = 0.00226966 Jy
! Component: 3550  -  total flux cleaned = 0.00233276 Jy
! Component: 3600  -  total flux cleaned = 0.00245823 Jy
! Component: 3650  -  total flux cleaned = 0.00248935 Jy
! Component: 3700  -  total flux cleaned = 0.00259756 Jy
! Component: 3750  -  total flux cleaned = 0.0026436 Jy
! Component: 3800  -  total flux cleaned = 0.00273533 Jy
! Component: 3850  -  total flux cleaned = 0.00281116 Jy
! Component: 3900  -  total flux cleaned = 0.0028715 Jy
! Component: 3950  -  total flux cleaned = 0.00293147 Jy
! Component: 4000  -  total flux cleaned = 0.00297637 Jy
! Component: 4050  -  total flux cleaned = 0.00305043 Jy
! Total flux subtracted in 4096 components = 0.00313879 Jy
! Clean residual min=-0.000866 max=0.000979 Jy/beam
! Clean residual mean=-0.000000 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.657576 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 431 components and 0.657575 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0641-0320_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.141 x 7.779 at -4.024 degrees (North through East)
! Clean map  min=-0.0016592  max=0.48815 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0641-0320_S_map.fits
wmodel /vlbi/uf001/uva//J0641-0320_S_map.mod
! Writing 431 model components to file: /vlbi/uf001/uva//J0641-0320_S_map.mod
wobs   /vlbi/uf001/uva//J0641-0320_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0641-0320_S_uvs.fits
wwins  /vlbi/uf001/uva//J0641-0320_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0641-0320_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.488154 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000269863 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.165847 0.165847 0.331694 0.663388 1.32678 2.65355 5.3071 10.6142 21.2284 42.4568 84.9136
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.488 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1808.9 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0641-0320_S_dfm.log closed on Sun Jan 13 23:06:28 2019