! Started logfile: /vlbi/uf001/uva//J0637-3536_S_b_dfm.log on Sun Jan 13 23:04:55 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0637-3536_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0637-3536_S_b_uva.fits
! AN table 1: 74 integrations on 15 of 15 possible baselines.
! AN table 2: 74 integrations on 21 of 21 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0637-3536
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7992 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0637-3536_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.012645Jy  sigma=13.227435
! Fit after  self-cal, rms=0.899938Jy  sigma=11.708929
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.978 mas, bmaj=26.46 mas, bpa=-15.11 degrees
! Estimated noise=1.1625 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0730194 Jy
! Component: 100  -  total flux cleaned = 0.0967328 Jy
! Total flux subtracted in 100 components = 0.0967328 Jy
! Clean residual min=-0.007224 max=0.011169 Jy/beam
! Clean residual mean=-0.000162 rms=0.002668 Jy/beam
! Combined flux in latest and established models = 0.0967328 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0967328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105355Jy  sigma=1.270521
! Fit after  self-cal, rms=0.105002Jy  sigma=1.266700
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.847 mas, bmaj=24.46 mas, bpa=-13.93 degrees
! Estimated noise=0.632219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0213005 Jy
! Component: 100  -  total flux cleaned = 0.0340141 Jy
! Component: 150  -  total flux cleaned = 0.0423436 Jy
! Component: 200  -  total flux cleaned = 0.0479508 Jy
! Total flux subtracted in 200 components = 0.0479508 Jy
! Clean residual min=-0.005353 max=0.006349 Jy/beam
! Clean residual mean=-0.000163 rms=0.001732 Jy/beam
! Combined flux in latest and established models = 0.144684 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 76 components and 0.144684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100636Jy  sigma=1.196533
! Fit after  self-cal, rms=0.100515Jy  sigma=1.193575
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.847 x 24.46 at -13.93 degrees (North through East)
! Clean map  min=-0.0053668  max=0.097646 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.10     KP        0.92     LA        0.80     NL        1.23     
!   OV        1.02     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     KP        1.07     LA        0.86     MK        1.06     
!   NL        1.24     OV        1.00     PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.04     KP        0.99     LA        0.85     NL        1.18     
!   OV        0.88     PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     KP        1.04     LA        0.88     MK        1.05     
!   NL        1.16     OV        0.86     PT        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.05     KP        1.04     LA        0.87     NL        1.03     
!   OV        1.01     PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     KP        1.08     LA        0.88     MK        0.99     
!   NL        1.16     OV        1.01     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.100515Jy  sigma=1.193575
! Fit after  self-cal, rms=0.102920Jy  sigma=1.175754
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.938 mas, bmaj=24.68 mas, bpa=-14.07 degrees
! Estimated noise=0.625718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176813 Jy
! Component: 100  -  total flux cleaned = 0.0019533 Jy
! Component: 150  -  total flux cleaned = 0.00210967 Jy
! Component: 200  -  total flux cleaned = 0.00224699 Jy
! Total flux subtracted in 200 components = 0.00224699 Jy
! Clean residual min=-0.002434 max=0.003924 Jy/beam
! Clean residual mean=-0.000021 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.146931 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 96 components and 0.146931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102850Jy  sigma=1.174741
! Fit after  self-cal, rms=0.103180Jy  sigma=1.173657
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103180Jy  sigma=1.173657
! Fit after  self-cal, rms=0.103875Jy  sigma=1.173501
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.943 mas, bmaj=24.6 mas, bpa=-14.07 degrees
! Estimated noise=0.62685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120779 Jy
! Component: 100  -  total flux cleaned = 0.00134914 Jy
! Component: 150  -  total flux cleaned = 0.00143068 Jy
! Component: 200  -  total flux cleaned = 0.00150351 Jy
! Total flux subtracted in 200 components = 0.00150351 Jy
! Clean residual min=-0.002424 max=0.003600 Jy/beam
! Clean residual mean=-0.000015 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.148434 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 105 components and 0.148434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103834Jy  sigma=1.172952
! Fit after  self-cal, rms=0.103874Jy  sigma=1.172862
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17, -15.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348037 Jy
! Component: 100  -  total flux cleaned = 0.00421536 Jy
! Component: 150  -  total flux cleaned = 0.00406364 Jy
! Component: 200  -  total flux cleaned = 0.00406657 Jy
! Total flux subtracted in 200 components = 0.00406657 Jy
! Clean residual min=-0.002054 max=0.002169 Jy/beam
! Clean residual mean=0.000007 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.152501 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 138 components and 0.152501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103731Jy  sigma=1.171297
! Fit after  self-cal, rms=0.103675Jy  sigma=1.170997
! Inverting map 
! Added new window around map position (115, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125395 Jy
! Component: 100  -  total flux cleaned = 0.0016097 Jy
! Component: 150  -  total flux cleaned = 0.0016631 Jy
! Component: 200  -  total flux cleaned = 0.00166233 Jy
! Total flux subtracted in 200 components = 0.00166233 Jy
! Clean residual min=-0.001889 max=0.001851 Jy/beam
! Clean residual mean=0.000005 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.154163 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 172 components and 0.154163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103593Jy  sigma=1.170238
! Fit after  self-cal, rms=0.103578Jy  sigma=1.170131
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103578Jy  sigma=1.170131
! Fit after  self-cal, rms=0.103112Jy  sigma=1.170013
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.954 mas, bmaj=24.57 mas, bpa=-14.06 degrees
! Estimated noise=0.624517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497815 Jy
! Component: 100  -  total flux cleaned = 0.000588052 Jy
! Component: 150  -  total flux cleaned = 0.000511347 Jy
! Component: 200  -  total flux cleaned = 0.000473868 Jy
! Total flux subtracted in 200 components = 0.000473868 Jy
! Clean residual min=-0.001708 max=0.001774 Jy/beam
! Clean residual mean=0.000009 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.154637 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 200 components and 0.154637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103068Jy  sigma=1.169700
! Fit after  self-cal, rms=0.103072Jy  sigma=1.169654
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125268 Jy
! Component: 100  -  total flux cleaned = 0.0001235 Jy
! Component: 150  -  total flux cleaned = 0.000157459 Jy
! Component: 200  -  total flux cleaned = 0.0001886 Jy
! Total flux subtracted in 200 components = 0.0001886 Jy
! Clean residual min=-0.001647 max=0.001763 Jy/beam
! Clean residual mean=0.000009 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.154825 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 215 components and 0.154825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103042Jy  sigma=1.169438
! Fit after  self-cal, rms=0.103030Jy  sigma=1.169349
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103030Jy  sigma=1.169349
! Fit after  self-cal, rms=0.102798Jy  sigma=1.169306
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.577 mas, bmaj=27.11 mas, bpa=-7.038 degrees
! Estimated noise=0.709004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329885 Jy
! Component: 100  -  total flux cleaned = 0.00039047 Jy
! Component: 150  -  total flux cleaned = 0.000418115 Jy
! Component: 200  -  total flux cleaned = 0.000392687 Jy
! Total flux subtracted in 200 components = 0.000392687 Jy
! Clean residual min=-0.001475 max=0.001442 Jy/beam
! Clean residual mean=0.000014 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.155218 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 253 components and 0.155218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102780Jy  sigma=1.169199
! Fit after  self-cal, rms=0.102776Jy  sigma=1.169186
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168152 Jy
! Component: 100  -  total flux cleaned = 0.000120567 Jy
! Component: 150  -  total flux cleaned = 9.90929e-05 Jy
! Component: 200  -  total flux cleaned = 7.78584e-05 Jy
! Total flux subtracted in 200 components = 7.78584e-05 Jy
! Clean residual min=-0.001425 max=0.001420 Jy/beam
! Clean residual mean=0.000014 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.155296 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 275 components and 0.155296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102764Jy  sigma=1.169141
! Fit after  self-cal, rms=0.102760Jy  sigma=1.169134
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.963 mas, bmaj=24.58 mas, bpa=-14.05 degrees
! Estimated noise=0.623808 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.963 x 24.58 at -14.05 degrees (North through East)
! Clean map  min=-0.0021805  max=0.095164 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.049 mas, bmaj=26.47 mas, bpa=-15.28 degrees
! Estimated noise=1.18885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0734055 Jy
! Component: 100  -  total flux cleaned = 0.0968505 Jy
! Component: 150  -  total flux cleaned = 0.110312 Jy
! Component: 200  -  total flux cleaned = 0.119687 Jy
! Total flux subtracted in 200 components = 0.119687 Jy
! Clean residual min=-0.006341 max=0.005716 Jy/beam
! Clean residual mean=-0.000069 rms=0.001863 Jy/beam
! Combined flux in latest and established models = 0.119687 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 0.119687 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.963 mas, bmaj=24.58 mas, bpa=-14.05 degrees
! Estimated noise=0.623808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108313 Jy
! Component: 100  -  total flux cleaned = 0.0177214 Jy
! Component: 150  -  total flux cleaned = 0.022691 Jy
! Component: 200  -  total flux cleaned = 0.0255796 Jy
! Total flux subtracted in 200 components = 0.0255796 Jy
! Clean residual min=-0.002995 max=0.002601 Jy/beam
! Clean residual mean=-0.000034 rms=0.000832 Jy/beam
! Combined flux in latest and established models = 0.145267 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 114 components and 0.145267 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.577 mas, bmaj=27.11 mas, bpa=-7.038 degrees
! Estimated noise=0.709004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00371679 Jy
! Component: 100  -  total flux cleaned = 0.00531051 Jy
! Component: 150  -  total flux cleaned = 0.00645856 Jy
! Component: 200  -  total flux cleaned = 0.00722515 Jy
! Total flux subtracted in 200 components = 0.00722515 Jy
! Clean residual min=-0.001921 max=0.001740 Jy/beam
! Clean residual mean=0.000002 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.152492 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000444186 Jy
! Component: 100  -  total flux cleaned = 0.000836005 Jy
! Component: 150  -  total flux cleaned = 0.00118864 Jy
! Component: 200  -  total flux cleaned = 0.00147402 Jy
! Total flux subtracted in 200 components = 0.00147402 Jy
! Clean residual min=-0.001666 max=0.001527 Jy/beam
! Clean residual mean=0.000008 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.153966 Jy
! Adding 104 model components to the UV plane model.
! The established model now contains 214 components and 0.153966 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.963 mas, bmaj=24.58 mas, bpa=-14.05 degrees
! Estimated noise=0.623808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000197578 Jy
! Component: 100  -  total flux cleaned = -0.000199651 Jy
! Component: 150  -  total flux cleaned = -3.16581e-05 Jy
! Component: 200  -  total flux cleaned = 0.000117357 Jy
! Total flux subtracted in 200 components = 0.000117357 Jy
! Clean residual min=-0.001975 max=0.001902 Jy/beam
! Clean residual mean=0.000003 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.154083 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 245 components and 0.154083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102802Jy  sigma=1.169660
! Fit after  self-cal, rms=0.102766Jy  sigma=1.169547
wmodel J0637-3536_S_b_map.mod
! Writing 245 model components to file: J0637-3536_S_b_map.mod
wobs   J0637-3536_S_b_uvs.fits
! Writing UV FITS file: J0637-3536_S_b_uvs.fits
wwins  J0637-3536_S_b_map.win
! wwins: Wrote 3 windows to J0637-3536_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000551824 Jy
! Component: 100  -  total flux cleaned = -0.000884398 Jy
! Component: 150  -  total flux cleaned = -0.00102235 Jy
! Component: 200  -  total flux cleaned = -0.00112606 Jy
! Component: 250  -  total flux cleaned = -0.00112571 Jy
! Component: 300  -  total flux cleaned = -0.00112571 Jy
! Component: 350  -  total flux cleaned = -0.00117089 Jy
! Component: 400  -  total flux cleaned = -0.00123563 Jy
! Component: 450  -  total flux cleaned = -0.00125609 Jy
! Component: 500  -  total flux cleaned = -0.00135699 Jy
! Component: 550  -  total flux cleaned = -0.0014164 Jy
! Component: 600  -  total flux cleaned = -0.00147363 Jy
! Component: 650  -  total flux cleaned = -0.00147354 Jy
! Component: 700  -  total flux cleaned = -0.00147324 Jy
! Component: 750  -  total flux cleaned = -0.00140195 Jy
! Component: 800  -  total flux cleaned = -0.00138478 Jy
! Component: 850  -  total flux cleaned = -0.00135065 Jy
! Component: 900  -  total flux cleaned = -0.00128357 Jy
! Component: 950  -  total flux cleaned = -0.00123445 Jy
! Component: 1000  -  total flux cleaned = -0.00120241 Jy
! Component: 1050  -  total flux cleaned = -0.00113895 Jy
! Component: 1100  -  total flux cleaned = -0.00110767 Jy
! Component: 1150  -  total flux cleaned = -0.0010618 Jy
! Component: 1200  -  total flux cleaned = -0.00103173 Jy
! Component: 1250  -  total flux cleaned = -0.00103189 Jy
! Component: 1300  -  total flux cleaned = -0.00101708 Jy
! Component: 1350  -  total flux cleaned = -0.00100252 Jy
! Component: 1400  -  total flux cleaned = -0.000974143 Jy
! Component: 1450  -  total flux cleaned = -0.000960216 Jy
! Component: 1500  -  total flux cleaned = -0.000918787 Jy
! Component: 1550  -  total flux cleaned = -0.000905329 Jy
! Component: 1600  -  total flux cleaned = -0.000865146 Jy
! Component: 1650  -  total flux cleaned = -0.000838693 Jy
! Component: 1700  -  total flux cleaned = -0.000773058 Jy
! Component: 1750  -  total flux cleaned = -0.000721048 Jy
! Component: 1800  -  total flux cleaned = -0.000669949 Jy
! Component: 1850  -  total flux cleaned = -0.000657284 Jy
! Component: 1900  -  total flux cleaned = -0.000607226 Jy
! Component: 1950  -  total flux cleaned = -0.000582552 Jy
! Component: 2000  -  total flux cleaned = -0.000545842 Jy
! Component: 2050  -  total flux cleaned = -0.000509425 Jy
! Component: 2100  -  total flux cleaned = -0.000497505 Jy
! Component: 2150  -  total flux cleaned = -0.000461975 Jy
! Component: 2200  -  total flux cleaned = -0.000462003 Jy
! Component: 2250  -  total flux cleaned = -0.000485257 Jy
! Component: 2300  -  total flux cleaned = -0.000508386 Jy
! Component: 2350  -  total flux cleaned = -0.000554119 Jy
! Component: 2400  -  total flux cleaned = -0.000576822 Jy
! Component: 2450  -  total flux cleaned = -0.000576876 Jy
! Component: 2500  -  total flux cleaned = -0.000621799 Jy
! Component: 2550  -  total flux cleaned = -0.000632965 Jy
! Component: 2600  -  total flux cleaned = -0.000655168 Jy
! Component: 2650  -  total flux cleaned = -0.000666137 Jy
! Component: 2700  -  total flux cleaned = -0.000666127 Jy
! Component: 2750  -  total flux cleaned = -0.000655215 Jy
! Component: 2800  -  total flux cleaned = -0.000655225 Jy
! Component: 2850  -  total flux cleaned = -0.000644449 Jy
! Component: 2900  -  total flux cleaned = -0.000666072 Jy
! Component: 2950  -  total flux cleaned = -0.000666063 Jy
! Component: 3000  -  total flux cleaned = -0.000676815 Jy
! Component: 3050  -  total flux cleaned = -0.000666095 Jy
! Component: 3100  -  total flux cleaned = -0.000676712 Jy
! Component: 3150  -  total flux cleaned = -0.00067669 Jy
! Component: 3200  -  total flux cleaned = -0.000666113 Jy
! Component: 3250  -  total flux cleaned = -0.000666066 Jy
! Component: 3300  -  total flux cleaned = -0.000645025 Jy
! Component: 3350  -  total flux cleaned = -0.000634492 Jy
! Component: 3400  -  total flux cleaned = -0.000624034 Jy
! Component: 3450  -  total flux cleaned = -0.000613568 Jy
! Component: 3500  -  total flux cleaned = -0.000592684 Jy
! Component: 3550  -  total flux cleaned = -0.000551156 Jy
! Component: 3600  -  total flux cleaned = -0.000540773 Jy
! Component: 3650  -  total flux cleaned = -0.000509742 Jy
! Component: 3700  -  total flux cleaned = -0.000488992 Jy
! Component: 3750  -  total flux cleaned = -0.000489 Jy
! Component: 3800  -  total flux cleaned = -0.000478633 Jy
! Component: 3850  -  total flux cleaned = -0.000447719 Jy
! Component: 3900  -  total flux cleaned = -0.000427097 Jy
! Component: 3950  -  total flux cleaned = -0.000406517 Jy
! Component: 4000  -  total flux cleaned = -0.000365372 Jy
! Component: 4050  -  total flux cleaned = -0.000334516 Jy
! Total flux subtracted in 4096 components = -0.000293369 Jy
! Clean residual min=-0.000547 max=0.000619 Jy/beam
! Clean residual mean=0.000001 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.15379 Jy
keep
! Adding 248 model components to the UV plane model.
! The established model now contains 493 components and 0.15379 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0637-3536_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.963 x 24.58 at -14.05 degrees (North through East)
! Clean map  min=-0.0019794  max=0.094578 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0637-3536_S_b_map.fits
wmodel /vlbi/uf001/uva//J0637-3536_S_b_map.mod
! Writing 493 model components to file: /vlbi/uf001/uva//J0637-3536_S_b_map.mod
wobs   /vlbi/uf001/uva//J0637-3536_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0637-3536_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J0637-3536_S_b_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0637-3536_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0945776 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000196821 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.624316 0.624316 1.24863 2.49726 4.99453 9.98905 19.9781 39.9562 79.9124
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.094 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  480.526 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0637-3536_S_b_dfm.log closed on Sun Jan 13 23:05:00 2019