! Started logfile: /vlbi/uf001/uva//J0637+3322_S_dfm.log on Sun Jan 13 23:04:12 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0637+3322_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0637+3322_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.99922 visibilities/baseline/integration-bin.
! Found source: J0637+3322
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7689 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0637+3322_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.005079Jy  sigma=25.385267
! Fit after  self-cal, rms=0.945450Jy  sigma=23.884747
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.003 mas, bmaj=5.388 mas, bpa=-5.492 degrees
! Estimated noise=0.489327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0422703 Jy
! Component: 100  -  total flux cleaned = 0.0533602 Jy
! Total flux subtracted in 100 components = 0.0533602 Jy
! Clean residual min=-0.003043 max=0.004393 Jy/beam
! Clean residual mean=-0.000002 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.0533602 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0533602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060342Jy  sigma=1.379457
! Fit after  self-cal, rms=0.059038Jy  sigma=1.338724
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00559499 Jy
! Component: 100  -  total flux cleaned = 0.00780499 Jy
! Total flux subtracted in 100 components = 0.00780499 Jy
! Clean residual min=-0.003177 max=0.003036 Jy/beam
! Clean residual mean=-0.000001 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.0611652 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.0611652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058536Jy  sigma=1.325845
! Fit after  self-cal, rms=0.058524Jy  sigma=1.325510
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=6.29 mas, bpa=-2.484 degrees
! Estimated noise=0.331057 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120395 Jy
! Component: 100  -  total flux cleaned = 0.00143867 Jy
! Component: 150  -  total flux cleaned = 0.00141037 Jy
! Component: 200  -  total flux cleaned = 0.00134628 Jy
! Total flux subtracted in 200 components = 0.00134628 Jy
! Clean residual min=-0.001974 max=0.002073 Jy/beam
! Clean residual mean=-0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.0625115 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.0625115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058500Jy  sigma=1.324963
! Fit after  self-cal, rms=0.058499Jy  sigma=1.324946
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.625 x 6.29 at -2.484 degrees (North through East)
! Clean map  min=-0.0018856  max=0.056889 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.97     KP        0.99     
!   LA        0.96     MK        0.94     NL        0.99     OV        1.04     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.99     KP        1.04     
!   LA        0.98     MK        1.05     NL        1.09     OV        0.99     
!   PT        0.97     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.08     HN        1.00     KP        0.95     
!   LA        0.91     MK        1.05     NL        1.09     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.058499Jy  sigma=1.324946
! Fit after  self-cal, rms=0.057922Jy  sigma=1.321719
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.613 mas, bmaj=6.278 mas, bpa=-1.77 degrees
! Estimated noise=0.330591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.90834e-05 Jy
! Component: 100  -  total flux cleaned = -0.000124145 Jy
! Component: 150  -  total flux cleaned = -0.000149066 Jy
! Component: 200  -  total flux cleaned = -0.000171831 Jy
! Total flux subtracted in 200 components = -0.000171831 Jy
! Clean residual min=-0.001913 max=0.001784 Jy/beam
! Clean residual mean=-0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.0623397 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.0623397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057914Jy  sigma=1.321579
! Fit after  self-cal, rms=0.057891Jy  sigma=1.321401
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057891Jy  sigma=1.321401
! Fit after  self-cal, rms=0.059434Jy  sigma=1.316524
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.607 mas, bmaj=6.294 mas, bpa=-2.198 degrees
! Estimated noise=0.330569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.54882e-05 Jy
! Component: 100  -  total flux cleaned = -3.44529e-05 Jy
! Component: 150  -  total flux cleaned = -5.14557e-05 Jy
! Component: 200  -  total flux cleaned = -5.94266e-05 Jy
! Total flux subtracted in 200 components = -5.94266e-05 Jy
! Clean residual min=-0.001969 max=0.001989 Jy/beam
! Clean residual mean=-0.000001 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.0622803 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 0.0622803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059431Jy  sigma=1.316426
! Fit after  self-cal, rms=0.059462Jy  sigma=1.316225
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.39351e-05 Jy
! Component: 100  -  total flux cleaned = -6.37677e-05 Jy
! Component: 150  -  total flux cleaned = -6.37353e-05 Jy
! Component: 200  -  total flux cleaned = -5.8236e-05 Jy
! Total flux subtracted in 200 components = -5.8236e-05 Jy
! Clean residual min=-0.001960 max=0.001972 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.062222 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 42 components and 0.062222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059461Jy  sigma=1.316184
! Fit after  self-cal, rms=0.059461Jy  sigma=1.316182
! Inverting map 
! Added new window around map position (-86.5, 41.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000872945 Jy
! Component: 100  -  total flux cleaned = 0.000398963 Jy
! Component: 150  -  total flux cleaned = 0.000124446 Jy
! Component: 200  -  total flux cleaned = -2.42146e-05 Jy
! Total flux subtracted in 200 components = -2.42146e-05 Jy
! Clean residual min=-0.001837 max=0.001814 Jy/beam
! Clean residual mean=-0.000001 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0621978 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.0621978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059406Jy  sigma=1.314617
! Fit after  self-cal, rms=0.059397Jy  sigma=1.314462
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059397Jy  sigma=1.314462
! Fit after  self-cal, rms=0.059665Jy  sigma=1.314275
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.6 mas, bmaj=6.288 mas, bpa=-2.553 degrees
! Estimated noise=0.330319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199625 Jy
! Component: 100  -  total flux cleaned = 2.81681e-05 Jy
! Component: 150  -  total flux cleaned = -5.74021e-05 Jy
! Component: 200  -  total flux cleaned = -9.68757e-05 Jy
! Total flux subtracted in 200 components = -9.68757e-05 Jy
! Clean residual min=-0.001717 max=0.001846 Jy/beam
! Clean residual mean=-0.000001 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.0621009 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.0621009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059649Jy  sigma=1.313767
! Fit after  self-cal, rms=0.059653Jy  sigma=1.313730
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-60, 43).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129644 Jy
! Component: 100  -  total flux cleaned = 0.00147088 Jy
! Component: 150  -  total flux cleaned = 0.00140377 Jy
! Component: 200  -  total flux cleaned = 0.00145512 Jy
! Total flux subtracted in 200 components = 0.00145512 Jy
! Clean residual min=-0.001750 max=0.001652 Jy/beam
! Clean residual mean=-0.000001 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.0635561 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 0.0635561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059583Jy  sigma=1.312317
! Fit after  self-cal, rms=0.059579Jy  sigma=1.312203
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059579Jy  sigma=1.312203
! Fit after  self-cal, rms=0.059375Jy  sigma=1.312098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.489 mas, bmaj=9.591 mas, bpa=-4.441 degrees
! Estimated noise=0.405907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.67714e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122691 Jy
! Component: 150  -  total flux cleaned = 0.000206052 Jy
! Component: 200  -  total flux cleaned = 0.000312773 Jy
! Total flux subtracted in 200 components = 0.000312773 Jy
! Clean residual min=-0.001477 max=0.001527 Jy/beam
! Clean residual mean=-0.000002 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.0638688 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.0638688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059368Jy  sigma=1.311930
! Fit after  self-cal, rms=0.059368Jy  sigma=1.311906
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.42384e-05 Jy
! Component: 100  -  total flux cleaned = 0.000143058 Jy
! Component: 150  -  total flux cleaned = 0.000193974 Jy
! Component: 200  -  total flux cleaned = 0.000229449 Jy
! Total flux subtracted in 200 components = 0.000229449 Jy
! Clean residual min=-0.001445 max=0.001517 Jy/beam
! Clean residual mean=-0.000002 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0640983 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 113 components and 0.0640983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059365Jy  sigma=1.311813
! Fit after  self-cal, rms=0.059364Jy  sigma=1.311804
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=6.281 mas, bpa=-2.638 degrees
! Estimated noise=0.32901 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.602 x 6.281 at -2.638 degrees (North through East)
! Clean map  min=-0.0016228  max=0.056829 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.984 mas, bmaj=5.388 mas, bpa=-5.883 degrees
! Estimated noise=0.485054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0430864 Jy
! Component: 100  -  total flux cleaned = 0.0549362 Jy
! Component: 150  -  total flux cleaned = 0.0597306 Jy
! Component: 200  -  total flux cleaned = 0.0621627 Jy
! Total flux subtracted in 200 components = 0.0621627 Jy
! Clean residual min=-0.003095 max=0.002758 Jy/beam
! Clean residual mean=-0.000001 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.0621627 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0621627 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=6.281 mas, bpa=-2.638 degrees
! Estimated noise=0.32901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227965 Jy
! Component: 100  -  total flux cleaned = 0.00264616 Jy
! Component: 150  -  total flux cleaned = 0.00295483 Jy
! Component: 200  -  total flux cleaned = 0.00290893 Jy
! Total flux subtracted in 200 components = 0.00290893 Jy
! Clean residual min=-0.001886 max=0.001670 Jy/beam
! Clean residual mean=-0.000002 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0650716 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 33 components and 0.0650716 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.489 mas, bmaj=9.591 mas, bpa=-4.441 degrees
! Estimated noise=0.405907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000360924 Jy
! Component: 100  -  total flux cleaned = -0.000475808 Jy
! Component: 150  -  total flux cleaned = -0.000574004 Jy
! Component: 200  -  total flux cleaned = -0.000574051 Jy
! Total flux subtracted in 200 components = -0.000574051 Jy
! Clean residual min=-0.001426 max=0.001507 Jy/beam
! Clean residual mean=-0.000002 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0644976 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.92734e-05 Jy
! Component: 100  -  total flux cleaned = -1.69971e-05 Jy
! Component: 150  -  total flux cleaned = 3.19009e-07 Jy
! Component: 200  -  total flux cleaned = 2.34932e-07 Jy
! Total flux subtracted in 200 components = 2.34932e-07 Jy
! Clean residual min=-0.001417 max=0.001516 Jy/beam
! Clean residual mean=-0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0644978 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 0.0644978 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.602 mas, bmaj=6.281 mas, bpa=-2.638 degrees
! Estimated noise=0.32901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149504 Jy
! Component: 100  -  total flux cleaned = -8.82526e-05 Jy
! Component: 150  -  total flux cleaned = -6.14336e-05 Jy
! Component: 200  -  total flux cleaned = -3.55897e-05 Jy
! Total flux subtracted in 200 components = -3.55897e-05 Jy
! Clean residual min=-0.001756 max=0.001594 Jy/beam
! Clean residual mean=-0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0644622 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.0644622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059370Jy  sigma=1.312038
! Fit after  self-cal, rms=0.059371Jy  sigma=1.311991
wmodel J0637+3322_S_map.mod
! Writing 75 model components to file: J0637+3322_S_map.mod
wobs   J0637+3322_S_uvs.fits
! Writing UV FITS file: J0637+3322_S_uvs.fits
wwins  J0637+3322_S_map.win
! wwins: Wrote 3 windows to J0637+3322_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226493 Jy
! Component: 100  -  total flux cleaned = -8.80776e-05 Jy
! Component: 150  -  total flux cleaned = 4.39464e-05 Jy
! Component: 200  -  total flux cleaned = 0.000171739 Jy
! Component: 250  -  total flux cleaned = 0.000246062 Jy
! Component: 300  -  total flux cleaned = 0.00029442 Jy
! Component: 350  -  total flux cleaned = 0.000318152 Jy
! Component: 400  -  total flux cleaned = 0.000340915 Jy
! Component: 450  -  total flux cleaned = 0.00034067 Jy
! Component: 500  -  total flux cleaned = 0.000318785 Jy
! Component: 550  -  total flux cleaned = 0.000297072 Jy
! Component: 600  -  total flux cleaned = 0.000254469 Jy
! Component: 650  -  total flux cleaned = 0.000233415 Jy
! Component: 700  -  total flux cleaned = 0.000171284 Jy
! Component: 750  -  total flux cleaned = 0.000150787 Jy
! Component: 800  -  total flux cleaned = 7.03676e-05 Jy
! Component: 850  -  total flux cleaned = 1.09525e-05 Jy
! Component: 900  -  total flux cleaned = -8.33595e-06 Jy
! Component: 950  -  total flux cleaned = -4.69537e-05 Jy
! Component: 1000  -  total flux cleaned = -0.000122671 Jy
! Component: 1050  -  total flux cleaned = -0.000103445 Jy
! Component: 1100  -  total flux cleaned = -0.000140292 Jy
! Component: 1150  -  total flux cleaned = -0.000103762 Jy
! Component: 1200  -  total flux cleaned = -0.000158169 Jy
! Component: 1250  -  total flux cleaned = -0.000140148 Jy
! Component: 1300  -  total flux cleaned = -0.000122247 Jy
! Component: 1350  -  total flux cleaned = -6.99543e-05 Jy
! Component: 1400  -  total flux cleaned = -0.000104537 Jy
! Component: 1450  -  total flux cleaned = -5.31533e-05 Jy
! Component: 1500  -  total flux cleaned = -6.99597e-05 Jy
! Component: 1550  -  total flux cleaned = -1.97246e-05 Jy
! Component: 1600  -  total flux cleaned = -3.13503e-06 Jy
! Component: 1650  -  total flux cleaned = 2.96693e-05 Jy
! Component: 1700  -  total flux cleaned = 2.9546e-05 Jy
! Component: 1750  -  total flux cleaned = 4.58119e-05 Jy
! Component: 1800  -  total flux cleaned = -5.01405e-05 Jy
! Component: 1850  -  total flux cleaned = 4.52318e-05 Jy
! Component: 1900  -  total flux cleaned = -2.07495e-06 Jy
! Component: 1950  -  total flux cleaned = 6.03458e-05 Jy
! Component: 2000  -  total flux cleaned = 1.38648e-05 Jy
! Component: 2050  -  total flux cleaned = -1.67723e-05 Jy
! Component: 2100  -  total flux cleaned = -4.71549e-05 Jy
! Component: 2150  -  total flux cleaned = -1.68397e-05 Jy
! Component: 2200  -  total flux cleaned = -3.17183e-05 Jy
! Component: 2250  -  total flux cleaned = -1.68506e-05 Jy
! Component: 2300  -  total flux cleaned = -1.66917e-05 Jy
! Component: 2350  -  total flux cleaned = -1.68482e-05 Jy
! Component: 2400  -  total flux cleaned = 4.1328e-05 Jy
! Component: 2450  -  total flux cleaned = -3.06476e-05 Jy
! Component: 2500  -  total flux cleaned = -2.05092e-06 Jy
! Component: 2550  -  total flux cleaned = 4.05637e-05 Jy
! Component: 2600  -  total flux cleaned = -2.00764e-06 Jy
! Component: 2650  -  total flux cleaned = -2.13759e-06 Jy
! Component: 2700  -  total flux cleaned = -7.17571e-05 Jy
! Component: 2750  -  total flux cleaned = -4.40476e-05 Jy
! Component: 2800  -  total flux cleaned = -3.01388e-05 Jy
! Component: 2850  -  total flux cleaned = -7.10121e-05 Jy
! Component: 2900  -  total flux cleaned = -7.09586e-05 Jy
! Component: 2950  -  total flux cleaned = -1.71136e-05 Jy
! Component: 3000  -  total flux cleaned = -3.03768e-05 Jy
! Component: 3050  -  total flux cleaned = -1.71415e-05 Jy
! Component: 3100  -  total flux cleaned = 9.10518e-06 Jy
! Component: 3150  -  total flux cleaned = -4.0439e-06 Jy
! Component: 3200  -  total flux cleaned = 8.9203e-06 Jy
! Component: 3250  -  total flux cleaned = 6.06077e-05 Jy
! Component: 3300  -  total flux cleaned = 0.000137517 Jy
! Component: 3350  -  total flux cleaned = 0.000137448 Jy
! Component: 3400  -  total flux cleaned = 0.000200702 Jy
! Component: 3450  -  total flux cleaned = 0.000225809 Jy
! Component: 3500  -  total flux cleaned = 0.000300819 Jy
! Component: 3550  -  total flux cleaned = 0.000338105 Jy
! Component: 3600  -  total flux cleaned = 0.000436873 Jy
! Component: 3650  -  total flux cleaned = 0.000473686 Jy
! Component: 3700  -  total flux cleaned = 0.000498053 Jy
! Component: 3750  -  total flux cleaned = 0.000498012 Jy
! Component: 3800  -  total flux cleaned = 0.000546306 Jy
! Component: 3850  -  total flux cleaned = 0.00060632 Jy
! Component: 3900  -  total flux cleaned = 0.000618198 Jy
! Component: 3950  -  total flux cleaned = 0.000641935 Jy
! Component: 4000  -  total flux cleaned = 0.000665633 Jy
! Component: 4050  -  total flux cleaned = 0.000736096 Jy
! Total flux subtracted in 4096 components = 0.000806191 Jy
! Clean residual min=-0.000734 max=0.000660 Jy/beam
! Clean residual mean=-0.000002 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0652684 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 378 components and 0.0652684 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0637+3322_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.602 x 6.281 at -2.638 degrees (North through East)
! Clean map  min=-0.0012442  max=0.056552 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0637+3322_S_map.fits
wmodel /vlbi/uf001/uva//J0637+3322_S_map.mod
! Writing 378 model components to file: /vlbi/uf001/uva//J0637+3322_S_map.mod
wobs   /vlbi/uf001/uva//J0637+3322_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0637+3322_S_uvs.fits
wwins  /vlbi/uf001/uva//J0637+3322_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0637+3322_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0565518 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000213033 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13011 1.13011 2.26022 4.52044 9.04089 18.0818 36.1635 72.3271
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.056 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  265.46 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0637+3322_S_dfm.log closed on Sun Jan 13 23:04:16 2019