! Started logfile: /vlbi/uf001/uva//J0632+3200_X_dfm.log on Sun Jan 13 23:02:35 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0632+3200_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0632+3200_X_uva.fits
! AN table 1: 87 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.982631 visibilities/baseline/integration-bin.
! Found source: J0632+3200
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 46164 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0632+3200_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008193Jy  sigma=22.794157
! Fit after  self-cal, rms=0.869674Jy  sigma=19.552987
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7248 mas, bmaj=1.333 mas, bpa=-3.777 degrees
! Estimated noise=0.349827 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102368 Jy
! Component: 100  -  total flux cleaned = 0.12597 Jy
! Total flux subtracted in 100 components = 0.12597 Jy
! Clean residual min=-0.004944 max=0.008696 Jy/beam
! Clean residual mean=-0.000006 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.12597 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.12597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066553Jy  sigma=1.331339
! Fit after  self-cal, rms=0.066394Jy  sigma=1.329856
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00945853 Jy
! Component: 100  -  total flux cleaned = 0.0140829 Jy
! Total flux subtracted in 100 components = 0.0140829 Jy
! Clean residual min=-0.004497 max=0.005966 Jy/beam
! Clean residual mean=-0.000005 rms=0.000966 Jy/beam
! Combined flux in latest and established models = 0.140053 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.140053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065148Jy  sigma=1.291581
! Fit after  self-cal, rms=0.065163Jy  sigma=1.291465
! Inverting map 
! Added new window around map position (-14.4, -21.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048718 Jy
! Component: 100  -  total flux cleaned = 0.00545003 Jy
! Total flux subtracted in 100 components = 0.00545003 Jy
! Clean residual min=-0.004238 max=0.005107 Jy/beam
! Clean residual mean=-0.000005 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.145503 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.145503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064867Jy  sigma=1.288581
! Fit after  self-cal, rms=0.064847Jy  sigma=1.287991
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9519 mas, bmaj=1.65 mas, bpa=-2.557 degrees
! Estimated noise=0.151062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235706 Jy
! Component: 100  -  total flux cleaned = 0.00235703 Jy
! Component: 150  -  total flux cleaned = 0.00235695 Jy
! Component: 200  -  total flux cleaned = 0.00206706 Jy
! Total flux subtracted in 200 components = 0.00206706 Jy
! Clean residual min=-0.003883 max=0.004018 Jy/beam
! Clean residual mean=-0.000007 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.14757 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 35 components and 0.14757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064194Jy  sigma=1.278865
! Fit after  self-cal, rms=0.064185Jy  sigma=1.278248
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9519 x 1.65 at -2.557 degrees (North through East)
! Clean map  min=-0.0036118  max=0.13438 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.85     KP        1.01     
!   LA        1.04     MK        1.15     NL        0.99     OV        0.95     
!   PT        0.91     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        0.84     KP        1.02     
!   LA        1.02     MK        1.15     NL        0.99     OV        0.95     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.87     KP        0.98     
!   LA        1.03     MK        1.12     NL        0.99     OV        0.95     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        0.87     KP        1.02     
!   LA        1.02     MK        1.14     NL        0.99     OV        0.95     
!   PT        0.94     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.02     HN        0.92     KP        1.02     
!   LA        1.04     MK        1.16     NL        0.99     OV        0.94     
!   PT        0.92     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.89     KP        1.01     
!   LA        1.01     MK        1.14     NL        1.00     OV        0.96     
!   PT        0.95     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.86     KP        1.02     
!   LA        1.01     MK        1.13     NL        1.00     OV        0.97     
!   PT        0.93     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.03     HN        0.88     KP        1.02     
!   LA        1.02     MK        1.13     NL        1.00     OV        0.95     
!   PT        0.93     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.03     HN        0.86     KP        1.01     
!   LA        1.01     MK        1.14     NL        1.00     OV        0.96     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.88     KP        1.02     
!   LA        1.01     MK        1.13     NL        1.02     OV        0.95     
!   PT        0.93     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.88     KP        1.00     
!   LA        1.03     MK        1.10     NL        0.99     OV        0.95     
!   PT        0.92     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.03     HN        0.86     KP        1.02     
!   LA        1.03     MK        1.05     NL        1.01     OV        0.97     
!   PT        0.95     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.064185Jy  sigma=1.278248
! Fit after  self-cal, rms=0.062512Jy  sigma=1.246983
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9635 mas, bmaj=1.662 mas, bpa=-1.568 degrees
! Estimated noise=0.149306 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000361354 Jy
! Component: 100  -  total flux cleaned = -0.000845733 Jy
! Component: 150  -  total flux cleaned = -0.00126455 Jy
! Component: 200  -  total flux cleaned = -0.00141042 Jy
! Total flux subtracted in 200 components = -0.00141042 Jy
! Clean residual min=-0.002293 max=0.002210 Jy/beam
! Clean residual mean=-0.000001 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.14616 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 58 components and 0.14616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062080Jy  sigma=1.243180
! Fit after  self-cal, rms=0.062099Jy  sigma=1.242794
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062099Jy  sigma=1.242794
! Fit after  self-cal, rms=0.083006Jy  sigma=1.221904
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9652 mas, bmaj=1.659 mas, bpa=-3.23 degrees
! Estimated noise=0.150259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00179861 Jy
! Component: 100  -  total flux cleaned = -0.00248917 Jy
! Component: 150  -  total flux cleaned = -0.00243102 Jy
! Component: 200  -  total flux cleaned = -0.00235742 Jy
! Total flux subtracted in 200 components = -0.00235742 Jy
! Clean residual min=-0.000964 max=0.000842 Jy/beam
! Clean residual mean=-0.000001 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.143802 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.143802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082968Jy  sigma=1.220364
! Fit after  self-cal, rms=0.083064Jy  sigma=1.220091
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000470643 Jy
! Component: 100  -  total flux cleaned = -0.000381899 Jy
! Component: 150  -  total flux cleaned = -0.00029942 Jy
! Component: 200  -  total flux cleaned = -0.0002808 Jy
! Total flux subtracted in 200 components = -0.0002808 Jy
! Clean residual min=-0.000907 max=0.000809 Jy/beam
! Clean residual mean=-0.000001 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.143521 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 82 components and 0.143521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083057Jy  sigma=1.219706
! Fit after  self-cal, rms=0.083054Jy  sigma=1.219687
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083054Jy  sigma=1.219687
! Fit after  self-cal, rms=0.086575Jy  sigma=1.219447
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9651 mas, bmaj=1.66 mas, bpa=-3.339 degrees
! Estimated noise=0.150119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000769307 Jy
! Component: 100  -  total flux cleaned = -0.000767564 Jy
! Component: 150  -  total flux cleaned = -0.000766814 Jy
! Component: 200  -  total flux cleaned = -0.000747644 Jy
! Total flux subtracted in 200 components = -0.000747644 Jy
! Clean residual min=-0.000848 max=0.000757 Jy/beam
! Clean residual mean=-0.000001 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.142774 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 85 components and 0.142774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086564Jy  sigma=1.219048
! Fit after  self-cal, rms=0.086569Jy  sigma=1.219031
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110171 Jy
! Component: 100  -  total flux cleaned = -9.24351e-05 Jy
! Component: 150  -  total flux cleaned = -7.61887e-05 Jy
! Component: 200  -  total flux cleaned = -9.13096e-05 Jy
! Total flux subtracted in 200 components = -9.13096e-05 Jy
! Clean residual min=-0.000825 max=0.000745 Jy/beam
! Clean residual mean=-0.000001 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.142683 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 94 components and 0.142683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086563Jy  sigma=1.218816
! Fit after  self-cal, rms=0.086562Jy  sigma=1.218811
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086562Jy  sigma=1.218811
! Fit after  self-cal, rms=0.087335Jy  sigma=1.218760
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.192 mas, bmaj=2.638 mas, bpa=-6.414 degrees
! Estimated noise=0.183248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.46548e-05 Jy
! Component: 100  -  total flux cleaned = 1.79719e-05 Jy
! Component: 150  -  total flux cleaned = 7.3264e-05 Jy
! Component: 200  -  total flux cleaned = 0.000102595 Jy
! Total flux subtracted in 200 components = 0.000102595 Jy
! Clean residual min=-0.000728 max=0.000865 Jy/beam
! Clean residual mean=-0.000001 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.142785 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 108 components and 0.142785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087334Jy  sigma=1.218645
! Fit after  self-cal, rms=0.087336Jy  sigma=1.218630
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.82694e-05 Jy
! Component: 100  -  total flux cleaned = 7.61147e-05 Jy
! Component: 150  -  total flux cleaned = 9.25688e-05 Jy
! Component: 200  -  total flux cleaned = 0.000107556 Jy
! Total flux subtracted in 200 components = 0.000107556 Jy
! Clean residual min=-0.000720 max=0.000849 Jy/beam
! Clean residual mean=-0.000001 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.142893 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 117 components and 0.142893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087335Jy  sigma=1.218569
! Fit after  self-cal, rms=0.087334Jy  sigma=1.218563
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9647 mas, bmaj=1.661 mas, bpa=-3.378 degrees
! Estimated noise=0.150019 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9647 x 1.661 at -3.378 degrees (North through East)
! Clean map  min=-0.0011297  max=0.13276 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7327 mas, bmaj=1.342 mas, bpa=-4.841 degrees
! Estimated noise=0.349665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102307 Jy
! Component: 100  -  total flux cleaned = 0.125164 Jy
! Component: 150  -  total flux cleaned = 0.133421 Jy
! Component: 200  -  total flux cleaned = 0.137474 Jy
! Total flux subtracted in 200 components = 0.137474 Jy
! Clean residual min=-0.001900 max=0.002028 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.137474 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.137474 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9647 mas, bmaj=1.661 mas, bpa=-3.378 degrees
! Estimated noise=0.150019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218633 Jy
! Component: 100  -  total flux cleaned = 0.00336764 Jy
! Component: 150  -  total flux cleaned = 0.00391839 Jy
! Component: 200  -  total flux cleaned = 0.00434731 Jy
! Total flux subtracted in 200 components = 0.00434731 Jy
! Clean residual min=-0.000778 max=0.000841 Jy/beam
! Clean residual mean=-0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.141822 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 32 components and 0.141821 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.192 mas, bmaj=2.638 mas, bpa=-6.414 degrees
! Estimated noise=0.183248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332196 Jy
! Component: 100  -  total flux cleaned = 0.000697373 Jy
! Component: 150  -  total flux cleaned = 0.000852768 Jy
! Component: 200  -  total flux cleaned = 0.000966906 Jy
! Total flux subtracted in 200 components = 0.000966906 Jy
! Clean residual min=-0.000750 max=0.000818 Jy/beam
! Clean residual mean=-0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.142788 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.71681e-05 Jy
! Component: 100  -  total flux cleaned = 0.000132771 Jy
! Component: 150  -  total flux cleaned = 0.00018915 Jy
! Component: 200  -  total flux cleaned = 0.000220561 Jy
! Total flux subtracted in 200 components = 0.000220561 Jy
! Clean residual min=-0.000720 max=0.000808 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.143009 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 67 components and 0.143009 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9647 mas, bmaj=1.661 mas, bpa=-3.378 degrees
! Estimated noise=0.150019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.02817e-05 Jy
! Component: 100  -  total flux cleaned = -6.70011e-05 Jy
! Component: 150  -  total flux cleaned = -8.77362e-05 Jy
! Component: 200  -  total flux cleaned = -8.74724e-05 Jy
! Total flux subtracted in 200 components = -8.74724e-05 Jy
! Clean residual min=-0.000749 max=0.000750 Jy/beam
! Clean residual mean=-0.000000 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.142921 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 83 components and 0.142921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087355Jy  sigma=1.218760
! Fit after  self-cal, rms=0.087334Jy  sigma=1.218652
wmodel J0632+3200_X_map.mod
! Writing 83 model components to file: J0632+3200_X_map.mod
wobs   J0632+3200_X_uvs.fits
! Writing UV FITS file: J0632+3200_X_uvs.fits
wwins  J0632+3200_X_map.win
! wwins: Wrote 4 windows to J0632+3200_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 5.50552e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122084 Jy
! Component: 150  -  total flux cleaned = 0.000109409 Jy
! Component: 200  -  total flux cleaned = 9.68243e-05 Jy
! Component: 250  -  total flux cleaned = 4.77236e-05 Jy
! Component: 300  -  total flux cleaned = 4.76615e-05 Jy
! Component: 350  -  total flux cleaned = 3.5705e-05 Jy
! Component: 400  -  total flux cleaned = 2.39645e-05 Jy
! Component: 450  -  total flux cleaned = 1.24367e-05 Jy
! Component: 500  -  total flux cleaned = 1.226e-05 Jy
! Component: 550  -  total flux cleaned = -4.31408e-05 Jy
! Component: 600  -  total flux cleaned = -3.2138e-05 Jy
! Component: 650  -  total flux cleaned = 5.43232e-08 Jy
! Component: 700  -  total flux cleaned = -1.08641e-05 Jy
! Component: 750  -  total flux cleaned = -3.19985e-05 Jy
! Component: 800  -  total flux cleaned = 9.44226e-06 Jy
! Component: 850  -  total flux cleaned = -3.17864e-05 Jy
! Component: 900  -  total flux cleaned = 9.10136e-06 Jy
! Component: 950  -  total flux cleaned = 4.91451e-05 Jy
! Component: 1000  -  total flux cleaned = 1.93358e-05 Jy
! Component: 1050  -  total flux cleaned = 6.86263e-05 Jy
! Component: 1100  -  total flux cleaned = 5.87289e-05 Jy
! Component: 1150  -  total flux cleaned = 5.86587e-05 Jy
! Component: 1200  -  total flux cleaned = 4.90825e-05 Jy
! Component: 1250  -  total flux cleaned = 3.00402e-05 Jy
! Component: 1300  -  total flux cleaned = 2.06169e-05 Jy
! Component: 1350  -  total flux cleaned = 2.06914e-05 Jy
! Component: 1400  -  total flux cleaned = -7.04719e-06 Jy
! Component: 1450  -  total flux cleaned = 2.06297e-05 Jy
! Component: 1500  -  total flux cleaned = 5.71008e-05 Jy
! Component: 1550  -  total flux cleaned = 5.70337e-05 Jy
! Component: 1600  -  total flux cleaned = 4.79292e-05 Jy
! Component: 1650  -  total flux cleaned = 6.583e-05 Jy
! Component: 1700  -  total flux cleaned = 7.46548e-05 Jy
! Component: 1750  -  total flux cleaned = 0.000127337 Jy
! Component: 1800  -  total flux cleaned = 0.00011854 Jy
! Component: 1850  -  total flux cleaned = 0.000118513 Jy
! Component: 1900  -  total flux cleaned = 0.000153076 Jy
! Component: 1950  -  total flux cleaned = 0.000135965 Jy
! Component: 2000  -  total flux cleaned = 0.000170021 Jy
! Component: 2050  -  total flux cleaned = 0.000203884 Jy
! Component: 2100  -  total flux cleaned = 0.000212195 Jy
! Component: 2150  -  total flux cleaned = 0.000195519 Jy
! Component: 2200  -  total flux cleaned = 0.000228728 Jy
! Component: 2250  -  total flux cleaned = 0.000253515 Jy
! Component: 2300  -  total flux cleaned = 0.000253534 Jy
! Component: 2350  -  total flux cleaned = 0.00024535 Jy
! Component: 2400  -  total flux cleaned = 0.000302035 Jy
! Component: 2450  -  total flux cleaned = 0.000334264 Jy
! Component: 2500  -  total flux cleaned = 0.000334185 Jy
! Component: 2550  -  total flux cleaned = 0.000381899 Jy
! Component: 2600  -  total flux cleaned = 0.000389759 Jy
! Component: 2650  -  total flux cleaned = 0.000381872 Jy
! Component: 2700  -  total flux cleaned = 0.000389742 Jy
! Component: 2750  -  total flux cleaned = 0.000413065 Jy
! Component: 2800  -  total flux cleaned = 0.000413035 Jy
! Component: 2850  -  total flux cleaned = 0.000420771 Jy
! Component: 2900  -  total flux cleaned = 0.000451331 Jy
! Component: 2950  -  total flux cleaned = 0.00046666 Jy
! Component: 3000  -  total flux cleaned = 0.000451512 Jy
! Component: 3050  -  total flux cleaned = 0.000496674 Jy
! Component: 3100  -  total flux cleaned = 0.000496669 Jy
! Component: 3150  -  total flux cleaned = 0.000466846 Jy
! Component: 3200  -  total flux cleaned = 0.00048915 Jy
! Component: 3250  -  total flux cleaned = 0.000474381 Jy
! Component: 3300  -  total flux cleaned = 0.000518449 Jy
! Component: 3350  -  total flux cleaned = 0.000503868 Jy
! Component: 3400  -  total flux cleaned = 0.000532946 Jy
! Component: 3450  -  total flux cleaned = 0.000540151 Jy
! Component: 3500  -  total flux cleaned = 0.000518546 Jy
! Component: 3550  -  total flux cleaned = 0.000540008 Jy
! Component: 3600  -  total flux cleaned = 0.000518686 Jy
! Component: 3650  -  total flux cleaned = 0.00051165 Jy
! Component: 3700  -  total flux cleaned = 0.000504656 Jy
! Component: 3750  -  total flux cleaned = 0.00049067 Jy
! Component: 3800  -  total flux cleaned = 0.000539678 Jy
! Component: 3850  -  total flux cleaned = 0.000539651 Jy
! Component: 3900  -  total flux cleaned = 0.000574336 Jy
! Component: 3950  -  total flux cleaned = 0.000567426 Jy
! Component: 4000  -  total flux cleaned = 0.000588058 Jy
! Component: 4050  -  total flux cleaned = 0.000574369 Jy
! Total flux subtracted in 4096 components = 0.000574396 Jy
! Clean residual min=-0.000456 max=0.000347 Jy/beam
! Clean residual mean=-0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.143496 Jy
keep
! Adding 325 model components to the UV plane model.
! The established model now contains 408 components and 0.143496 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0632+3200_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9647 x 1.661 at -3.378 degrees (North through East)
! Clean map  min=-0.00093805  max=0.13312 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0632+3200_X_map.fits
wmodel /vlbi/uf001/uva//J0632+3200_X_map.mod
! Writing 408 model components to file: /vlbi/uf001/uva//J0632+3200_X_map.mod
wobs   /vlbi/uf001/uva//J0632+3200_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0632+3200_X_uvs.fits
wwins  /vlbi/uf001/uva//J0632+3200_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J0632+3200_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133119 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000117383 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.264537 0.264537 0.529074 1.05815 2.1163 4.23259 8.46519 16.9304 33.8607 67.7215
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1134.06 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0632+3200_X_dfm.log closed on Sun Jan 13 23:02:41 2019