! Started logfile: /vlbi/uf001/uva//J0631-1410_X_dfm.log on Sun Jan 13 23:02:07 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0631-1410_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0631-1410_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955556 visibilities/baseline/integration-bin.
! Found source: J0631-1410
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 14448 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0631-1410_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.098332Jy  sigma=20.298483
! Fit after  self-cal, rms=0.557251Jy  sigma=10.323771
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6449 mas, bmaj=1.652 mas, bpa=-4.09 degrees
! Estimated noise=0.54286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.34244 Jy
! Component: 100  -  total flux cleaned = 0.419576 Jy
! Total flux subtracted in 100 components = 0.419576 Jy
! Clean residual min=-0.017188 max=0.028408 Jy/beam
! Clean residual mean=0.000056 rms=0.003725 Jy/beam
! Combined flux in latest and established models = 0.419576 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.419576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.104596Jy  sigma=1.882716
! Fit after  self-cal, rms=0.104583Jy  sigma=1.882395
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0309722 Jy
! Component: 100  -  total flux cleaned = 0.0466952 Jy
! Total flux subtracted in 100 components = 0.0466952 Jy
! Clean residual min=-0.017579 max=0.019747 Jy/beam
! Clean residual mean=0.000042 rms=0.003173 Jy/beam
! Combined flux in latest and established models = 0.466271 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.466271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093437Jy  sigma=1.679118
! Fit after  self-cal, rms=0.093373Jy  sigma=1.677963
! Inverting map 
! Added new window around map position (-1.8, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166797 Jy
! Component: 100  -  total flux cleaned = 0.0252598 Jy
! Total flux subtracted in 100 components = 0.0252598 Jy
! Clean residual min=-0.016465 max=0.018230 Jy/beam
! Clean residual mean=0.000037 rms=0.002949 Jy/beam
! Combined flux in latest and established models = 0.491531 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.491531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090787Jy  sigma=1.628172
! Fit after  self-cal, rms=0.090434Jy  sigma=1.622107
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8256 mas, bmaj=1.961 mas, bpa=-3.014 degrees
! Estimated noise=0.349898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00528663 Jy
! Component: 100  -  total flux cleaned = 0.00674338 Jy
! Component: 150  -  total flux cleaned = 0.00759503 Jy
! Component: 200  -  total flux cleaned = 0.00794752 Jy
! Total flux subtracted in 200 components = 0.00794752 Jy
! Clean residual min=-0.018160 max=0.017157 Jy/beam
! Clean residual mean=0.000055 rms=0.004089 Jy/beam
! Combined flux in latest and established models = 0.499479 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 35 components and 0.499479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089750Jy  sigma=1.610333
! Fit after  self-cal, rms=0.089678Jy  sigma=1.609258
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8256 x 1.961 at -3.014 degrees (North through East)
! Clean map  min=-0.017463  max=0.44337 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.97     HN        0.97     KP        0.94     
!   LA        1.12     MK        1.02     NL        1.06     OV        0.90     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.97     KP        0.93     
!   LA        1.12     MK        1.02     NL        1.05     OV        0.89     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        0.97     KP        0.93     
!   LA        1.10     MK        1.02     NL        1.06     OV        0.88     
!   PT        0.92     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.97     HN        0.96     KP        0.94     
!   LA        1.10     MK        1.01     NL        1.06     OV        0.90     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.97     KP        0.95     
!   LA        1.11     MK        1.01     NL        1.07     OV        0.89     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.95     KP        0.95     
!   LA        1.11     MK        1.00     NL        1.07     OV        0.90     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        0.97     KP        0.93     
!   LA        1.13     MK        1.02     NL        1.07     OV        0.89     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        0.99     KP        0.94     
!   LA        1.11     MK        1.02     NL        1.07     OV        0.89     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        0.99     KP        0.94     
!   LA        1.12     MK        1.02     NL        1.05     OV        0.89     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.98     HN        0.98     KP        0.93     
!   LA        1.11     MK        1.03     NL        1.04     OV        0.89     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.97     KP        0.94     
!   LA        1.14     MK        1.01     NL        1.07     OV        0.90     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.97     HN        0.97     KP        0.96     
!   LA        1.14     MK        1.03     NL        1.05     OV        0.90     
!   PT        0.95     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.089678Jy  sigma=1.609258
! Fit after  self-cal, rms=0.079777Jy  sigma=1.387757
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8256 mas, bmaj=1.977 mas, bpa=-2.746 degrees
! Estimated noise=0.349615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.005603 Jy
! Component: 100  -  total flux cleaned = -0.00699652 Jy
! Component: 150  -  total flux cleaned = -0.0078267 Jy
! Component: 200  -  total flux cleaned = -0.00816028 Jy
! Total flux subtracted in 200 components = -0.00816028 Jy
! Clean residual min=-0.014015 max=0.012906 Jy/beam
! Clean residual mean=0.000017 rms=0.002964 Jy/beam
! Combined flux in latest and established models = 0.491318 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 0.491318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079241Jy  sigma=1.379164
! Fit after  self-cal, rms=0.079225Jy  sigma=1.378241
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079225Jy  sigma=1.378241
! Fit after  self-cal, rms=0.067956Jy  sigma=1.128540
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8273 mas, bmaj=1.983 mas, bpa=-2.824 degrees
! Estimated noise=0.350746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00494404 Jy
! Component: 100  -  total flux cleaned = -0.00516259 Jy
! Component: 150  -  total flux cleaned = -0.00516696 Jy
! Component: 200  -  total flux cleaned = -0.00516836 Jy
! Total flux subtracted in 200 components = -0.00516836 Jy
! Clean residual min=-0.003439 max=0.004212 Jy/beam
! Clean residual mean=0.000012 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.48615 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.48615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067523Jy  sigma=1.120099
! Fit after  self-cal, rms=0.067554Jy  sigma=1.118860
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306615 Jy
! Component: 100  -  total flux cleaned = 0.00425392 Jy
! Component: 150  -  total flux cleaned = 0.00486197 Jy
! Component: 200  -  total flux cleaned = 0.00498927 Jy
! Total flux subtracted in 200 components = 0.00498927 Jy
! Clean residual min=-0.003077 max=0.003672 Jy/beam
! Clean residual mean=0.000010 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.491139 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.491139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067277Jy  sigma=1.112992
! Fit after  self-cal, rms=0.067259Jy  sigma=1.112396
! Inverting map 
! Added new window around map position (-0.8, -10.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335677 Jy
! Component: 100  -  total flux cleaned = 0.0053316 Jy
! Component: 150  -  total flux cleaned = 0.00637626 Jy
! Component: 200  -  total flux cleaned = 0.00669444 Jy
! Total flux subtracted in 200 components = 0.00669444 Jy
! Clean residual min=-0.002821 max=0.002914 Jy/beam
! Clean residual mean=0.000008 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.497834 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 87 components and 0.497834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067049Jy  sigma=1.108563
! Fit after  self-cal, rms=0.067044Jy  sigma=1.108471
! Inverting map 
! Added new window around map position (2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025721 Jy
! Component: 100  -  total flux cleaned = 0.00339185 Jy
! Component: 150  -  total flux cleaned = 0.00391755 Jy
! Component: 200  -  total flux cleaned = 0.00422064 Jy
! Total flux subtracted in 200 components = 0.00422064 Jy
! Clean residual min=-0.002624 max=0.002289 Jy/beam
! Clean residual mean=0.000007 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.502055 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 100 components and 0.502054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066897Jy  sigma=1.104975
! Fit after  self-cal, rms=0.066888Jy  sigma=1.104753
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066888Jy  sigma=1.104753
! Fit after  self-cal, rms=0.066887Jy  sigma=1.103591
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8271 mas, bmaj=1.983 mas, bpa=-2.795 degrees
! Estimated noise=0.350642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119865 Jy
! Component: 100  -  total flux cleaned = -0.00114502 Jy
! Component: 150  -  total flux cleaned = -0.00119255 Jy
! Component: 200  -  total flux cleaned = -0.001192 Jy
! Total flux subtracted in 200 components = -0.001192 Jy
! Clean residual min=-0.002277 max=0.002180 Jy/beam
! Clean residual mean=0.000005 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.500862 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 108 components and 0.500862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066801Jy  sigma=1.101910
! Fit after  self-cal, rms=0.066799Jy  sigma=1.101801
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.10014e-05 Jy
! Component: 100  -  total flux cleaned = 0.000155514 Jy
! Component: 150  -  total flux cleaned = 0.000329678 Jy
! Component: 200  -  total flux cleaned = 0.000460809 Jy
! Total flux subtracted in 200 components = 0.000460809 Jy
! Clean residual min=-0.002213 max=0.002089 Jy/beam
! Clean residual mean=0.000005 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.501323 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 117 components and 0.501323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066760Jy  sigma=1.101121
! Fit after  self-cal, rms=0.066760Jy  sigma=1.101088
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066760Jy  sigma=1.101088
! Fit after  self-cal, rms=0.066695Jy  sigma=1.100707
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.114 mas, bmaj=3.942 mas, bpa=-0.7838 degrees
! Estimated noise=0.467381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104279 Jy
! Component: 100  -  total flux cleaned = 0.00101146 Jy
! Component: 150  -  total flux cleaned = 0.000982613 Jy
! Component: 200  -  total flux cleaned = 0.000958778 Jy
! Total flux subtracted in 200 components = 0.000958778 Jy
! Clean residual min=-0.002351 max=0.002976 Jy/beam
! Clean residual mean=0.000009 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.502282 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 133 components and 0.502282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066675Jy  sigma=1.100562
! Fit after  self-cal, rms=0.066674Jy  sigma=1.100538
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.2, -50.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023235 Jy
! Component: 100  -  total flux cleaned = 0.00290054 Jy
! Component: 150  -  total flux cleaned = 0.00315987 Jy
! Component: 200  -  total flux cleaned = 0.00339275 Jy
! Total flux subtracted in 200 components = 0.00339275 Jy
! Clean residual min=-0.002122 max=0.002237 Jy/beam
! Clean residual mean=0.000007 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.505675 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 157 components and 0.505675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066629Jy  sigma=1.099937
! Fit after  self-cal, rms=0.066627Jy  sigma=1.099789
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.827 mas, bmaj=1.983 mas, bpa=-2.781 degrees
! Estimated noise=0.350465 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.827 x 1.983 at -2.781 degrees (North through East)
! Clean map  min=-0.0030597  max=0.44495 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6461 mas, bmaj=1.668 mas, bpa=-3.71 degrees
! Estimated noise=0.545337 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.343912 Jy
! Component: 100  -  total flux cleaned = 0.421108 Jy
! Component: 150  -  total flux cleaned = 0.449688 Jy
! Component: 200  -  total flux cleaned = 0.463989 Jy
! Total flux subtracted in 200 components = 0.463989 Jy
! Clean residual min=-0.004775 max=0.006686 Jy/beam
! Clean residual mean=0.000014 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.463989 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.463989 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.827 mas, bmaj=1.983 mas, bpa=-2.781 degrees
! Estimated noise=0.350465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00977407 Jy
! Component: 100  -  total flux cleaned = 0.0156466 Jy
! Component: 150  -  total flux cleaned = 0.0201189 Jy
! Component: 200  -  total flux cleaned = 0.0236638 Jy
! Total flux subtracted in 200 components = 0.0236638 Jy
! Clean residual min=-0.002435 max=0.002867 Jy/beam
! Clean residual mean=0.000008 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.487653 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 39 components and 0.487653 Jy
! Inverting map 
! Added new window around map position (0.6, -12.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00321047 Jy
! Component: 100  -  total flux cleaned = 0.00547603 Jy
! Component: 150  -  total flux cleaned = 0.00728781 Jy
! Component: 200  -  total flux cleaned = 0.00883418 Jy
! Total flux subtracted in 200 components = 0.00883418 Jy
! Clean residual min=-0.002173 max=0.001976 Jy/beam
! Clean residual mean=0.000006 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.496487 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 61 components and 0.496487 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.114 mas, bmaj=3.942 mas, bpa=-0.7838 degrees
! Estimated noise=0.467381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0029313 Jy
! Component: 100  -  total flux cleaned = 0.0051863 Jy
! Component: 150  -  total flux cleaned = 0.00657718 Jy
! Component: 200  -  total flux cleaned = 0.00761341 Jy
! Total flux subtracted in 200 components = 0.00761341 Jy
! Clean residual min=-0.002361 max=0.002191 Jy/beam
! Clean residual mean=0.000009 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.504101 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103644 Jy
! Component: 100  -  total flux cleaned = 0.00194923 Jy
! Component: 150  -  total flux cleaned = 0.00272521 Jy
! Component: 200  -  total flux cleaned = 0.00338946 Jy
! Total flux subtracted in 200 components = 0.00338946 Jy
! Clean residual min=-0.002207 max=0.002227 Jy/beam
! Clean residual mean=0.000007 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.50749 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 126 components and 0.50749 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.827 mas, bmaj=1.983 mas, bpa=-2.781 degrees
! Estimated noise=0.350465 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.41041e-05 Jy
! Component: 100  -  total flux cleaned = 0.000359633 Jy
! Component: 150  -  total flux cleaned = 0.000730811 Jy
! Component: 200  -  total flux cleaned = 0.0011619 Jy
! Total flux subtracted in 200 components = 0.0011619 Jy
! Clean residual min=-0.001878 max=0.001763 Jy/beam
! Clean residual mean=0.000003 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.508652 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 147 components and 0.508652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066645Jy  sigma=1.100147
! Fit after  self-cal, rms=0.066625Jy  sigma=1.099674
wmodel J0631-1410_X_map.mod
! Writing 147 model components to file: J0631-1410_X_map.mod
wobs   J0631-1410_X_uvs.fits
! Writing UV FITS file: J0631-1410_X_uvs.fits
wwins  J0631-1410_X_map.win
! wwins: Wrote 7 windows to J0631-1410_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111897 Jy
! Component: 100  -  total flux cleaned = 9.58027e-05 Jy
! Component: 150  -  total flux cleaned = 0.000210351 Jy
! Component: 200  -  total flux cleaned = 0.000209731 Jy
! Component: 250  -  total flux cleaned = 0.000155834 Jy
! Component: 300  -  total flux cleaned = 0.000129334 Jy
! Component: 350  -  total flux cleaned = 5.36451e-05 Jy
! Component: 400  -  total flux cleaned = 2.93508e-05 Jy
! Component: 450  -  total flux cleaned = 0.000199254 Jy
! Component: 500  -  total flux cleaned = 0.000270452 Jy
! Component: 550  -  total flux cleaned = 0.000340722 Jy
! Component: 600  -  total flux cleaned = 0.000317625 Jy
! Component: 650  -  total flux cleaned = 0.000363285 Jy
! Component: 700  -  total flux cleaned = 0.000385695 Jy
! Component: 750  -  total flux cleaned = 0.00049619 Jy
! Component: 800  -  total flux cleaned = 0.000517508 Jy
! Component: 850  -  total flux cleaned = 0.0005176 Jy
! Component: 900  -  total flux cleaned = 0.00058155 Jy
! Component: 950  -  total flux cleaned = 0.000560641 Jy
! Component: 1000  -  total flux cleaned = 0.00058135 Jy
! Component: 1050  -  total flux cleaned = 0.00062219 Jy
! Component: 1100  -  total flux cleaned = 0.000581285 Jy
! Component: 1150  -  total flux cleaned = 0.000520859 Jy
! Component: 1200  -  total flux cleaned = 0.000540834 Jy
! Component: 1250  -  total flux cleaned = 0.000462402 Jy
! Component: 1300  -  total flux cleaned = 0.000384801 Jy
! Component: 1350  -  total flux cleaned = 0.000365787 Jy
! Component: 1400  -  total flux cleaned = 0.000365557 Jy
! Component: 1450  -  total flux cleaned = 0.000327861 Jy
! Component: 1500  -  total flux cleaned = 0.000290515 Jy
! Component: 1550  -  total flux cleaned = 0.000217296 Jy
! Component: 1600  -  total flux cleaned = 0.000235575 Jy
! Component: 1650  -  total flux cleaned = 0.000181811 Jy
! Component: 1700  -  total flux cleaned = 0.000235341 Jy
! Component: 1750  -  total flux cleaned = 0.000199873 Jy
! Component: 1800  -  total flux cleaned = 0.000129763 Jy
! Component: 1850  -  total flux cleaned = 9.51416e-05 Jy
! Component: 1900  -  total flux cleaned = 2.6561e-05 Jy
! Component: 1950  -  total flux cleaned = -4.14837e-05 Jy
! Component: 2000  -  total flux cleaned = -0.000142283 Jy
! Component: 2050  -  total flux cleaned = -0.000159065 Jy
! Component: 2100  -  total flux cleaned = -0.000357729 Jy
! Component: 2150  -  total flux cleaned = -0.000308376 Jy
! Component: 2200  -  total flux cleaned = -0.000324979 Jy
! Component: 2250  -  total flux cleaned = -0.000437989 Jy
! Component: 2300  -  total flux cleaned = -0.000502252 Jy
! Component: 2350  -  total flux cleaned = -0.000533949 Jy
! Component: 2400  -  total flux cleaned = -0.000565544 Jy
! Component: 2450  -  total flux cleaned = -0.000596804 Jy
! Component: 2500  -  total flux cleaned = -0.000674148 Jy
! Component: 2550  -  total flux cleaned = -0.000735694 Jy
! Component: 2600  -  total flux cleaned = -0.000735988 Jy
! Component: 2650  -  total flux cleaned = -0.000841984 Jy
! Component: 2700  -  total flux cleaned = -0.000902014 Jy
! Component: 2750  -  total flux cleaned = -0.000946418 Jy
! Component: 2800  -  total flux cleaned = -0.00103507 Jy
! Component: 2850  -  total flux cleaned = -0.00104969 Jy
! Component: 2900  -  total flux cleaned = -0.00103537 Jy
! Component: 2950  -  total flux cleaned = -0.0011077 Jy
! Component: 3000  -  total flux cleaned = -0.0011079 Jy
! Component: 3050  -  total flux cleaned = -0.00116487 Jy
! Component: 3100  -  total flux cleaned = -0.00117911 Jy
! Component: 3150  -  total flux cleaned = -0.00126325 Jy
! Component: 3200  -  total flux cleaned = -0.00124938 Jy
! Component: 3250  -  total flux cleaned = -0.00129098 Jy
! Component: 3300  -  total flux cleaned = -0.00127727 Jy
! Component: 3350  -  total flux cleaned = -0.00130449 Jy
! Component: 3400  -  total flux cleaned = -0.00127726 Jy
! Component: 3450  -  total flux cleaned = -0.0012638 Jy
! Component: 3500  -  total flux cleaned = -0.00134387 Jy
! Component: 3550  -  total flux cleaned = -0.00127758 Jy
! Component: 3600  -  total flux cleaned = -0.00134342 Jy
! Component: 3650  -  total flux cleaned = -0.00131707 Jy
! Component: 3700  -  total flux cleaned = -0.00133017 Jy
! Component: 3750  -  total flux cleaned = -0.00134301 Jy
! Component: 3800  -  total flux cleaned = -0.00138147 Jy
! Component: 3850  -  total flux cleaned = -0.00139419 Jy
! Component: 3900  -  total flux cleaned = -0.00139425 Jy
! Component: 3950  -  total flux cleaned = -0.0014194 Jy
! Component: 4000  -  total flux cleaned = -0.00144452 Jy
! Component: 4050  -  total flux cleaned = -0.00143215 Jy
! Total flux subtracted in 4096 components = -0.00149396 Jy
! Clean residual min=-0.000825 max=0.000667 Jy/beam
! Clean residual mean=0.000000 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.507158 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 453 components and 0.507158 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0631-1410_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.827 x 1.983 at -2.781 degrees (North through East)
! Clean map  min=-0.0013815  max=0.44617 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0631-1410_X_map.fits
wmodel /vlbi/uf001/uva//J0631-1410_X_map.mod
! Writing 453 model components to file: /vlbi/uf001/uva//J0631-1410_X_map.mod
wobs   /vlbi/uf001/uva//J0631-1410_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0631-1410_X_uvs.fits
wwins  /vlbi/uf001/uva//J0631-1410_X_map.win
! wwins: Wrote 8 windows to /vlbi/uf001/uva//J0631-1410_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.446171 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208763 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.14037 0.14037 0.280739 0.561479 1.12296 2.24592 4.49183 8.98366 17.9673 35.9347 71.8693
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.446 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2137.21 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0631-1410_X_dfm.log closed on Sun Jan 13 23:02:12 2019