! Started logfile: /vlbi/uf001/uva//J0628-2805_S_dfm.log on Sun Jan 13 23:00:52 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0628-2805_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0628-2805_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.980093 visibilities/baseline/integration-bin.
! Found source: J0628-2805
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6351 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0628-2805_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014776Jy  sigma=15.706227
! Fit after  self-cal, rms=0.855052Jy  sigma=12.983811
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.476 mas, bmaj=6.756 mas, bpa=-7.187 degrees
! Estimated noise=1.00228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117781 Jy
! Component: 100  -  total flux cleaned = 0.145343 Jy
! Total flux subtracted in 100 components = 0.145343 Jy
! Clean residual min=-0.009716 max=0.017013 Jy/beam
! Clean residual mean=0.000001 rms=0.002829 Jy/beam
! Combined flux in latest and established models = 0.145343 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.145343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096861Jy  sigma=1.397880
! Fit after  self-cal, rms=0.096843Jy  sigma=1.397551
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.964 mas, bmaj=7.988 mas, bpa=-6.136 degrees
! Estimated noise=0.591164 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179193 Jy
! Component: 100  -  total flux cleaned = 0.0277782 Jy
! Component: 150  -  total flux cleaned = 0.0343339 Jy
! Component: 200  -  total flux cleaned = 0.0388072 Jy
! Total flux subtracted in 200 components = 0.0388072 Jy
! Clean residual min=-0.007133 max=0.013162 Jy/beam
! Clean residual mean=0.000034 rms=0.002335 Jy/beam
! Combined flux in latest and established models = 0.18415 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 31 components and 0.18415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093995Jy  sigma=1.330261
! Fit after  self-cal, rms=0.093671Jy  sigma=1.322572
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.964 x 7.988 at -6.136 degrees (North through East)
! Clean map  min=-0.0064682  max=0.14591 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.43     FD        0.91     HN        1.22     KP        0.99     
!   LA        0.92     MK        1.02     NL        1.10     OV        0.93     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.27     FD        0.88     HN        1.24     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.05     OV        0.77     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.52     FD        0.92     HN        1.15     KP        1.01     
!   LA        0.94     MK        1.00     NL        1.04     OV        0.87     
!   PT        0.95     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.093671Jy  sigma=1.322572
! Fit after  self-cal, rms=0.114997Jy  sigma=1.235142
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.965 mas, bmaj=7.994 mas, bpa=-5.406 degrees
! Estimated noise=0.593428 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00246652 Jy
! Component: 100  -  total flux cleaned = -0.00300556 Jy
! Component: 150  -  total flux cleaned = -0.00339912 Jy
! Component: 200  -  total flux cleaned = -0.0037449 Jy
! Total flux subtracted in 200 components = -0.0037449 Jy
! Clean residual min=-0.003876 max=0.004133 Jy/beam
! Clean residual mean=0.000022 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.180405 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.180405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114881Jy  sigma=1.232820
! Fit after  self-cal, rms=0.115443Jy  sigma=1.231604
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115443Jy  sigma=1.231604
! Fit after  self-cal, rms=0.127653Jy  sigma=1.220674
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.971 mas, bmaj=7.983 mas, bpa=-5.503 degrees
! Estimated noise=0.594372 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00155606 Jy
! Component: 100  -  total flux cleaned = -0.00195556 Jy
! Component: 150  -  total flux cleaned = -0.00220786 Jy
! Component: 200  -  total flux cleaned = -0.00243434 Jy
! Total flux subtracted in 200 components = -0.00243434 Jy
! Clean residual min=-0.002698 max=0.003203 Jy/beam
! Clean residual mean=0.000002 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.177971 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.177971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127583Jy  sigma=1.219697
! Fit after  self-cal, rms=0.127694Jy  sigma=1.219490
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17.5, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135423 Jy
! Component: 100  -  total flux cleaned = 0.00111481 Jy
! Component: 150  -  total flux cleaned = 0.00100343 Jy
! Component: 200  -  total flux cleaned = 0.000957137 Jy
! Total flux subtracted in 200 components = 0.000957137 Jy
! Clean residual min=-0.002297 max=0.002158 Jy/beam
! Clean residual mean=0.000004 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.178928 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.178928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127594Jy  sigma=1.217718
! Fit after  self-cal, rms=0.127599Jy  sigma=1.217641
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.127599Jy  sigma=1.217641
! Fit after  self-cal, rms=0.128670Jy  sigma=1.217458
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.977 mas, bmaj=7.992 mas, bpa=-5.449 degrees
! Estimated noise=0.593273 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000423586 Jy
! Component: 100  -  total flux cleaned = -0.00059799 Jy
! Component: 150  -  total flux cleaned = -0.000759083 Jy
! Component: 200  -  total flux cleaned = -0.000910356 Jy
! Total flux subtracted in 200 components = -0.000910356 Jy
! Clean residual min=-0.002138 max=0.002153 Jy/beam
! Clean residual mean=0.000005 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.178017 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 87 components and 0.178017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128631Jy  sigma=1.216867
! Fit after  self-cal, rms=0.128634Jy  sigma=1.216841
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000178891 Jy
! Component: 100  -  total flux cleaned = -0.000282115 Jy
! Component: 150  -  total flux cleaned = -0.000410132 Jy
! Component: 200  -  total flux cleaned = -0.000471932 Jy
! Total flux subtracted in 200 components = -0.000471932 Jy
! Clean residual min=-0.002109 max=0.002163 Jy/beam
! Clean residual mean=0.000004 rms=0.000574 Jy/beam
! Combined flux in latest and established models = 0.177545 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 91 components and 0.177545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128611Jy  sigma=1.216531
! Fit after  self-cal, rms=0.128610Jy  sigma=1.216523
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128610Jy  sigma=1.216523
! Fit after  self-cal, rms=0.129203Jy  sigma=1.216440
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.73 mas, bmaj=19.9 mas, bpa=-1.085 degrees
! Estimated noise=0.764006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000606292 Jy
! Component: 100  -  total flux cleaned = -0.00093817 Jy
! Component: 150  -  total flux cleaned = -0.00107372 Jy
! Component: 200  -  total flux cleaned = -0.0011558 Jy
! Total flux subtracted in 200 components = -0.0011558 Jy
! Clean residual min=-0.002020 max=0.002389 Jy/beam
! Clean residual mean=0.000010 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.17639 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 97 components and 0.17639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.129196Jy  sigma=1.216324
! Fit after  self-cal, rms=0.129194Jy  sigma=1.216280
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000253333 Jy
! Component: 100  -  total flux cleaned = -0.000274817 Jy
! Component: 150  -  total flux cleaned = -0.000310123 Jy
! Component: 200  -  total flux cleaned = -0.000374549 Jy
! Total flux subtracted in 200 components = -0.000374549 Jy
! Clean residual min=-0.001977 max=0.002316 Jy/beam
! Clean residual mean=0.000009 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.176015 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 105 components and 0.176015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.129195Jy  sigma=1.216248
! Fit after  self-cal, rms=0.129191Jy  sigma=1.216236
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.98 mas, bmaj=7.997 mas, bpa=-5.395 degrees
! Estimated noise=0.592033 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.98 x 7.997 at -5.395 degrees (North through East)
! Clean map  min=-0.0024999  max=0.14692 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.49 mas, bmaj=6.732 mas, bpa=-6.568 degrees
! Estimated noise=1.00978 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11832 Jy
! Component: 100  -  total flux cleaned = 0.145612 Jy
! Component: 150  -  total flux cleaned = 0.156535 Jy
! Component: 200  -  total flux cleaned = 0.163335 Jy
! Total flux subtracted in 200 components = 0.163335 Jy
! Clean residual min=-0.004477 max=0.004855 Jy/beam
! Clean residual mean=-0.000001 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.163335 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.163335 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.98 mas, bmaj=7.997 mas, bpa=-5.395 degrees
! Estimated noise=0.592033 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589674 Jy
! Component: 100  -  total flux cleaned = 0.00828552 Jy
! Component: 150  -  total flux cleaned = 0.00915879 Jy
! Component: 200  -  total flux cleaned = 0.00986058 Jy
! Total flux subtracted in 200 components = 0.00986058 Jy
! Clean residual min=-0.002290 max=0.002151 Jy/beam
! Clean residual mean=-0.000000 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.173195 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 66 components and 0.173195 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.73 mas, bmaj=19.9 mas, bpa=-1.085 degrees
! Estimated noise=0.764006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185949 Jy
! Component: 100  -  total flux cleaned = 0.00218008 Jy
! Component: 150  -  total flux cleaned = 0.00221006 Jy
! Component: 200  -  total flux cleaned = 0.00221016 Jy
! Total flux subtracted in 200 components = 0.00221016 Jy
! Clean residual min=-0.002034 max=0.002407 Jy/beam
! Clean residual mean=0.000007 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.175406 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.26932e-05 Jy
! Component: 100  -  total flux cleaned = -2.15557e-05 Jy
! Component: 150  -  total flux cleaned = -2.03516e-05 Jy
! Component: 200  -  total flux cleaned = -3.76518e-05 Jy
! Total flux subtracted in 200 components = -3.76518e-05 Jy
! Clean residual min=-0.002000 max=0.002359 Jy/beam
! Clean residual mean=0.000008 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.175368 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 100 components and 0.175368 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.98 mas, bmaj=7.997 mas, bpa=-5.395 degrees
! Estimated noise=0.592033 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.83724e-05 Jy
! Component: 100  -  total flux cleaned = -4.44448e-05 Jy
! Component: 150  -  total flux cleaned = -8.12619e-05 Jy
! Component: 200  -  total flux cleaned = -0.0001158 Jy
! Total flux subtracted in 200 components = -0.0001158 Jy
! Clean residual min=-0.002105 max=0.002188 Jy/beam
! Clean residual mean=0.000003 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.175252 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 116 components and 0.175252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.129221Jy  sigma=1.216184
! Fit after  self-cal, rms=0.129179Jy  sigma=1.215990
wmodel J0628-2805_S_map.mod
! Writing 116 model components to file: J0628-2805_S_map.mod
wobs   J0628-2805_S_uvs.fits
! Writing UV FITS file: J0628-2805_S_uvs.fits
wwins  J0628-2805_S_map.win
! wwins: Wrote 3 windows to J0628-2805_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116043 Jy
! Component: 100  -  total flux cleaned = -0.000189737 Jy
! Component: 150  -  total flux cleaned = -0.000260379 Jy
! Component: 200  -  total flux cleaned = -0.000430383 Jy
! Component: 250  -  total flux cleaned = -0.000529442 Jy
! Component: 300  -  total flux cleaned = -0.000562395 Jy
! Component: 350  -  total flux cleaned = -0.00065634 Jy
! Component: 400  -  total flux cleaned = -0.00062514 Jy
! Component: 450  -  total flux cleaned = -0.000594674 Jy
! Component: 500  -  total flux cleaned = -0.000712977 Jy
! Component: 550  -  total flux cleaned = -0.000712892 Jy
! Component: 600  -  total flux cleaned = -0.00077009 Jy
! Component: 650  -  total flux cleaned = -0.000853799 Jy
! Component: 700  -  total flux cleaned = -0.000881707 Jy
! Component: 750  -  total flux cleaned = -0.000991429 Jy
! Component: 800  -  total flux cleaned = -0.00109897 Jy
! Component: 850  -  total flux cleaned = -0.00117824 Jy
! Component: 900  -  total flux cleaned = -0.0011262 Jy
! Component: 950  -  total flux cleaned = -0.00117788 Jy
! Component: 1000  -  total flux cleaned = -0.00117819 Jy
! Component: 1050  -  total flux cleaned = -0.00122824 Jy
! Component: 1100  -  total flux cleaned = -0.00120372 Jy
! Component: 1150  -  total flux cleaned = -0.00120357 Jy
! Component: 1200  -  total flux cleaned = -0.00120373 Jy
! Component: 1250  -  total flux cleaned = -0.00120353 Jy
! Component: 1300  -  total flux cleaned = -0.00110958 Jy
! Component: 1350  -  total flux cleaned = -0.0011329 Jy
! Component: 1400  -  total flux cleaned = -0.00111022 Jy
! Component: 1450  -  total flux cleaned = -0.00115511 Jy
! Component: 1500  -  total flux cleaned = -0.00111012 Jy
! Component: 1550  -  total flux cleaned = -0.00111019 Jy
! Component: 1600  -  total flux cleaned = -0.00106594 Jy
! Component: 1650  -  total flux cleaned = -0.0011091 Jy
! Component: 1700  -  total flux cleaned = -0.00110868 Jy
! Component: 1750  -  total flux cleaned = -0.00106614 Jy
! Component: 1800  -  total flux cleaned = -0.00108704 Jy
! Component: 1850  -  total flux cleaned = -0.00116975 Jy
! Component: 1900  -  total flux cleaned = -0.00112843 Jy
! Component: 1950  -  total flux cleaned = -0.00106761 Jy
! Component: 2000  -  total flux cleaned = -0.00108786 Jy
! Component: 2050  -  total flux cleaned = -0.00104793 Jy
! Component: 2100  -  total flux cleaned = -0.00104792 Jy
! Component: 2150  -  total flux cleaned = -0.00104784 Jy
! Component: 2200  -  total flux cleaned = -0.00106725 Jy
! Component: 2250  -  total flux cleaned = -0.00104801 Jy
! Component: 2300  -  total flux cleaned = -0.00102915 Jy
! Component: 2350  -  total flux cleaned = -0.00106703 Jy
! Component: 2400  -  total flux cleaned = -0.00110401 Jy
! Component: 2450  -  total flux cleaned = -0.00110362 Jy
! Component: 2500  -  total flux cleaned = -0.00104837 Jy
! Component: 2550  -  total flux cleaned = -0.00108481 Jy
! Component: 2600  -  total flux cleaned = -0.00106665 Jy
! Component: 2650  -  total flux cleaned = -0.00106664 Jy
! Component: 2700  -  total flux cleaned = -0.0010844 Jy
! Component: 2750  -  total flux cleaned = -0.00110191 Jy
! Component: 2800  -  total flux cleaned = -0.00111922 Jy
! Component: 2850  -  total flux cleaned = -0.00115391 Jy
! Component: 2900  -  total flux cleaned = -0.00115384 Jy
! Component: 2950  -  total flux cleaned = -0.00113678 Jy
! Component: 3000  -  total flux cleaned = -0.00113712 Jy
! Component: 3050  -  total flux cleaned = -0.00120452 Jy
! Component: 3100  -  total flux cleaned = -0.00118766 Jy
! Component: 3150  -  total flux cleaned = -0.00122088 Jy
! Component: 3200  -  total flux cleaned = -0.00120439 Jy
! Component: 3250  -  total flux cleaned = -0.00126992 Jy
! Component: 3300  -  total flux cleaned = -0.00126979 Jy
! Component: 3350  -  total flux cleaned = -0.00126977 Jy
! Component: 3400  -  total flux cleaned = -0.00130183 Jy
! Component: 3450  -  total flux cleaned = -0.00130169 Jy
! Component: 3500  -  total flux cleaned = -0.0013332 Jy
! Component: 3550  -  total flux cleaned = -0.00134898 Jy
! Component: 3600  -  total flux cleaned = -0.0013959 Jy
! Component: 3650  -  total flux cleaned = -0.00138029 Jy
! Component: 3700  -  total flux cleaned = -0.00141112 Jy
! Component: 3750  -  total flux cleaned = -0.00136503 Jy
! Component: 3800  -  total flux cleaned = -0.00136522 Jy
! Component: 3850  -  total flux cleaned = -0.00136512 Jy
! Component: 3900  -  total flux cleaned = -0.00142529 Jy
! Component: 3950  -  total flux cleaned = -0.00144005 Jy
! Component: 4000  -  total flux cleaned = -0.00142509 Jy
! Component: 4050  -  total flux cleaned = -0.00146933 Jy
! Total flux subtracted in 4096 components = -0.00145468 Jy
! Clean residual min=-0.001038 max=0.000867 Jy/beam
! Clean residual mean=0.000001 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.173797 Jy
keep
! Adding 268 model components to the UV plane model.
! The established model now contains 384 components and 0.173797 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0628-2805_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.98 x 7.997 at -5.395 degrees (North through East)
! Clean map  min=-0.0019948  max=0.14951 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0628-2805_S_map.fits
wmodel /vlbi/uf001/uva//J0628-2805_S_map.mod
! Writing 384 model components to file: /vlbi/uf001/uva//J0628-2805_S_map.mod
wobs   /vlbi/uf001/uva//J0628-2805_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0628-2805_S_uvs.fits
wwins  /vlbi/uf001/uva//J0628-2805_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0628-2805_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.149507 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261973 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.525674 0.525674 1.05135 2.1027 4.20539 8.41079 16.8216 33.6432 67.2863
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.149 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  570.695 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0628-2805_S_dfm.log closed on Sun Jan 13 23:00:56 2019