! Started logfile: /vlbi/uf001/uva//J0628+2835_S_dfm.log on Sun Jan 13 23:00:40 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0628+2835_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0628+2835_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.973879 visibilities/baseline/integration-bin.
! Found source: J0628+2835
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7494 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0628+2835_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027902Jy  sigma=24.526387
! Fit after  self-cal, rms=0.825747Jy  sigma=19.685081
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.947 mas, bmaj=5.908 mas, bpa=-0.1183 degrees
! Estimated noise=0.528913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133016 Jy
! Component: 100  -  total flux cleaned = 0.180127 Jy
! Total flux subtracted in 100 components = 0.180127 Jy
! Clean residual min=-0.006461 max=0.020032 Jy/beam
! Clean residual mean=-0.000026 rms=0.002178 Jy/beam
! Combined flux in latest and established models = 0.180127 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.180127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069577Jy  sigma=1.609204
! Fit after  self-cal, rms=0.068784Jy  sigma=1.589778
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232585 Jy
! Component: 100  -  total flux cleaned = 0.0343623 Jy
! Total flux subtracted in 100 components = 0.0343623 Jy
! Clean residual min=-0.004601 max=0.008765 Jy/beam
! Clean residual mean=-0.000013 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 0.21449 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.21449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059838Jy  sigma=1.362202
! Fit after  self-cal, rms=0.059641Jy  sigma=1.357323
! Inverting map 
! Added new window around map position (5.5, 5.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00843091 Jy
! Component: 100  -  total flux cleaned = 0.0133574 Jy
! Total flux subtracted in 100 components = 0.0133574 Jy
! Clean residual min=-0.003874 max=0.004293 Jy/beam
! Clean residual mean=-0.000010 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.227847 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 31 components and 0.227847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058129Jy  sigma=1.318154
! Fit after  self-cal, rms=0.058084Jy  sigma=1.316979
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=6.795 mas, bpa=1.056 degrees
! Estimated noise=0.361694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00581552 Jy
! Component: 100  -  total flux cleaned = 0.00957691 Jy
! Component: 150  -  total flux cleaned = 0.0123096 Jy
! Component: 200  -  total flux cleaned = 0.0143637 Jy
! Total flux subtracted in 200 components = 0.0143637 Jy
! Clean residual min=-0.003385 max=0.003579 Jy/beam
! Clean residual mean=-0.000004 rms=0.000828 Jy/beam
! Combined flux in latest and established models = 0.242211 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 60 components and 0.242211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057409Jy  sigma=1.299350
! Fit after  self-cal, rms=0.057387Jy  sigma=1.298721
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.453 x 6.795 at 1.056 degrees (North through East)
! Clean map  min=-0.0033086  max=0.16745 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.96     MK        0.94     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        0.99     KP        1.01     
!   LA        0.96     MK        0.99     NL        1.01     OV        0.95     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.01     KP        1.02     
!   LA        0.94     MK        1.11     NL        1.03     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.057387Jy  sigma=1.298721
! Fit after  self-cal, rms=0.056599Jy  sigma=1.279695
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.456 mas, bmaj=6.833 mas, bpa=1.168 degrees
! Estimated noise=0.359667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.44919e-05 Jy
! Component: 100  -  total flux cleaned = -0.000449813 Jy
! Component: 150  -  total flux cleaned = -0.000610759 Jy
! Component: 200  -  total flux cleaned = -0.000722763 Jy
! Total flux subtracted in 200 components = -0.000722763 Jy
! Clean residual min=-0.002869 max=0.002383 Jy/beam
! Clean residual mean=-0.000001 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.241488 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.241488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056540Jy  sigma=1.278672
! Fit after  self-cal, rms=0.056546Jy  sigma=1.278470
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056546Jy  sigma=1.278470
! Fit after  self-cal, rms=0.056036Jy  sigma=1.257161
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.442 mas, bmaj=6.838 mas, bpa=1.162 degrees
! Estimated noise=0.359202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.22588e-05 Jy
! Component: 100  -  total flux cleaned = -3.59221e-05 Jy
! Component: 150  -  total flux cleaned = -7.00622e-05 Jy
! Component: 200  -  total flux cleaned = -6.89021e-05 Jy
! Total flux subtracted in 200 components = -6.89021e-05 Jy
! Clean residual min=-0.001748 max=0.001914 Jy/beam
! Clean residual mean=-0.000001 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.241419 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 79 components and 0.241419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055992Jy  sigma=1.256075
! Fit after  self-cal, rms=0.056001Jy  sigma=1.255981
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.6216e-05 Jy
! Component: 100  -  total flux cleaned = -8.1852e-05 Jy
! Component: 150  -  total flux cleaned = -0.00012762 Jy
! Component: 200  -  total flux cleaned = -0.000169397 Jy
! Total flux subtracted in 200 components = -0.000169397 Jy
! Clean residual min=-0.001687 max=0.001855 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.24125 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 83 components and 0.24125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055983Jy  sigma=1.255526
! Fit after  self-cal, rms=0.055983Jy  sigma=1.255500
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055983Jy  sigma=1.255500
! Fit after  self-cal, rms=0.055995Jy  sigma=1.255323
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.433 mas, bmaj=6.838 mas, bpa=1.082 degrees
! Estimated noise=0.358849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115165 Jy
! Component: 100  -  total flux cleaned = 0.000115663 Jy
! Component: 150  -  total flux cleaned = 7.22503e-05 Jy
! Component: 200  -  total flux cleaned = 5.22132e-05 Jy
! Total flux subtracted in 200 components = 5.22132e-05 Jy
! Clean residual min=-0.001626 max=0.001795 Jy/beam
! Clean residual mean=-0.000001 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.241302 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.241302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055978Jy  sigma=1.254878
! Fit after  self-cal, rms=0.055980Jy  sigma=1.254859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.70885e-05 Jy
! Component: 100  -  total flux cleaned = -8.41131e-05 Jy
! Component: 150  -  total flux cleaned = -0.000118073 Jy
! Component: 200  -  total flux cleaned = -0.000134034 Jy
! Total flux subtracted in 200 components = -0.000134034 Jy
! Clean residual min=-0.001608 max=0.001762 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.241168 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.241168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055969Jy  sigma=1.254617
! Fit after  self-cal, rms=0.055970Jy  sigma=1.254601
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055970Jy  sigma=1.254601
! Fit after  self-cal, rms=0.055980Jy  sigma=1.254550
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.15 mas, bmaj=10.17 mas, bpa=-1.635 degrees
! Estimated noise=0.452199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.03853e-05 Jy
! Component: 100  -  total flux cleaned = 1.10764e-05 Jy
! Component: 150  -  total flux cleaned = 2.77498e-05 Jy
! Component: 200  -  total flux cleaned = 4.15098e-05 Jy
! Total flux subtracted in 200 components = 4.15098e-05 Jy
! Clean residual min=-0.001973 max=0.002069 Jy/beam
! Clean residual mean=-0.000003 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.241209 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 97 components and 0.241209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055977Jy  sigma=1.254523
! Fit after  self-cal, rms=0.055976Jy  sigma=1.254480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.69691e-06 Jy
! Component: 100  -  total flux cleaned = 2.9696e-05 Jy
! Component: 150  -  total flux cleaned = 3.05296e-05 Jy
! Component: 200  -  total flux cleaned = 3.04492e-05 Jy
! Total flux subtracted in 200 components = 3.04492e-05 Jy
! Clean residual min=-0.001981 max=0.002074 Jy/beam
! Clean residual mean=-0.000003 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.24124 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 104 components and 0.24124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055977Jy  sigma=1.254517
! Fit after  self-cal, rms=0.055977Jy  sigma=1.254502
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=6.836 mas, bpa=1.055 degrees
! Estimated noise=0.358713 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.428 x 6.836 at 1.055 degrees (North through East)
! Clean map  min=-0.0015982  max=0.16619 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.921 mas, bmaj=5.936 mas, bpa=-0.01281 degrees
! Estimated noise=0.525507 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133512 Jy
! Component: 100  -  total flux cleaned = 0.18337 Jy
! Component: 150  -  total flux cleaned = 0.205311 Jy
! Component: 200  -  total flux cleaned = 0.217242 Jy
! Total flux subtracted in 200 components = 0.217242 Jy
! Clean residual min=-0.003532 max=0.006184 Jy/beam
! Clean residual mean=-0.000008 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.217242 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.217242 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=6.836 mas, bpa=1.055 degrees
! Estimated noise=0.358713 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00917436 Jy
! Component: 100  -  total flux cleaned = 0.0144074 Jy
! Component: 150  -  total flux cleaned = 0.0175926 Jy
! Component: 200  -  total flux cleaned = 0.0197153 Jy
! Total flux subtracted in 200 components = 0.0197153 Jy
! Clean residual min=-0.001732 max=0.001832 Jy/beam
! Clean residual mean=-0.000002 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.236957 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 49 components and 0.236957 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.15 mas, bmaj=10.17 mas, bpa=-1.635 degrees
! Estimated noise=0.452199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00228169 Jy
! Component: 100  -  total flux cleaned = 0.00339299 Jy
! Component: 150  -  total flux cleaned = 0.00399954 Jy
! Component: 200  -  total flux cleaned = 0.00414076 Jy
! Total flux subtracted in 200 components = 0.00414076 Jy
! Clean residual min=-0.001972 max=0.002081 Jy/beam
! Clean residual mean=-0.000003 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.241098 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.76942e-05 Jy
! Component: 100  -  total flux cleaned = 6.92939e-05 Jy
! Component: 150  -  total flux cleaned = 8.7366e-05 Jy
! Component: 200  -  total flux cleaned = 0.00011071 Jy
! Total flux subtracted in 200 components = 0.00011071 Jy
! Clean residual min=-0.001966 max=0.002090 Jy/beam
! Clean residual mean=-0.000003 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.241209 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 80 components and 0.241209 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=6.836 mas, bpa=1.055 degrees
! Estimated noise=0.358713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.51324e-05 Jy
! Component: 100  -  total flux cleaned = 2.94486e-05 Jy
! Component: 150  -  total flux cleaned = 9.44707e-06 Jy
! Component: 200  -  total flux cleaned = -7.56858e-05 Jy
! Total flux subtracted in 200 components = -7.56858e-05 Jy
! Clean residual min=-0.001544 max=0.001669 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.241133 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.241133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055959Jy  sigma=1.253992
! Fit after  self-cal, rms=0.055951Jy  sigma=1.253650
wmodel J0628+2835_S_map.mod
! Writing 93 model components to file: J0628+2835_S_map.mod
wobs   J0628+2835_S_uvs.fits
! Writing UV FITS file: J0628+2835_S_uvs.fits
wwins  J0628+2835_S_map.win
! wwins: Wrote 2 windows to J0628+2835_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000742808 Jy
! Component: 100  -  total flux cleaned = 0.000916627 Jy
! Component: 150  -  total flux cleaned = 0.00105429 Jy
! Component: 200  -  total flux cleaned = 0.00121257 Jy
! Component: 250  -  total flux cleaned = 0.00136474 Jy
! Component: 300  -  total flux cleaned = 0.00156144 Jy
! Component: 350  -  total flux cleaned = 0.00172845 Jy
! Component: 400  -  total flux cleaned = 0.00186805 Jy
! Component: 450  -  total flux cleaned = 0.00198194 Jy
! Component: 500  -  total flux cleaned = 0.0020715 Jy
! Component: 550  -  total flux cleaned = 0.00218151 Jy
! Component: 600  -  total flux cleaned = 0.00226788 Jy
! Component: 650  -  total flux cleaned = 0.00231027 Jy
! Component: 700  -  total flux cleaned = 0.00235202 Jy
! Component: 750  -  total flux cleaned = 0.00239281 Jy
! Component: 800  -  total flux cleaned = 0.00233164 Jy
! Component: 850  -  total flux cleaned = 0.00231203 Jy
! Component: 900  -  total flux cleaned = 0.00237142 Jy
! Component: 950  -  total flux cleaned = 0.0023714 Jy
! Component: 1000  -  total flux cleaned = 0.00240958 Jy
! Component: 1050  -  total flux cleaned = 0.00235289 Jy
! Component: 1100  -  total flux cleaned = 0.00240905 Jy
! Component: 1150  -  total flux cleaned = 0.00240884 Jy
! Component: 1200  -  total flux cleaned = 0.00237264 Jy
! Component: 1250  -  total flux cleaned = 0.0024448 Jy
! Component: 1300  -  total flux cleaned = 0.00242697 Jy
! Component: 1350  -  total flux cleaned = 0.00240933 Jy
! Component: 1400  -  total flux cleaned = 0.0023571 Jy
! Component: 1450  -  total flux cleaned = 0.00233995 Jy
! Component: 1500  -  total flux cleaned = 0.00237364 Jy
! Component: 1550  -  total flux cleaned = 0.002306 Jy
! Component: 1600  -  total flux cleaned = 0.00223926 Jy
! Component: 1650  -  total flux cleaned = 0.00218979 Jy
! Component: 1700  -  total flux cleaned = 0.00217326 Jy
! Component: 1750  -  total flux cleaned = 0.00214096 Jy
! Component: 1800  -  total flux cleaned = 0.00214074 Jy
! Component: 1850  -  total flux cleaned = 0.00212474 Jy
! Component: 1900  -  total flux cleaned = 0.00212451 Jy
! Component: 1950  -  total flux cleaned = 0.00203117 Jy
! Component: 2000  -  total flux cleaned = 0.00207768 Jy
! Component: 2050  -  total flux cleaned = 0.00206245 Jy
! Component: 2100  -  total flux cleaned = 0.00207755 Jy
! Component: 2150  -  total flux cleaned = 0.00201745 Jy
! Component: 2200  -  total flux cleaned = 0.00198779 Jy
! Component: 2250  -  total flux cleaned = 0.00195834 Jy
! Component: 2300  -  total flux cleaned = 0.00195834 Jy
! Component: 2350  -  total flux cleaned = 0.00192938 Jy
! Component: 2400  -  total flux cleaned = 0.00191501 Jy
! Component: 2450  -  total flux cleaned = 0.00188665 Jy
! Component: 2500  -  total flux cleaned = 0.0018726 Jy
! Component: 2550  -  total flux cleaned = 0.0018726 Jy
! Component: 2600  -  total flux cleaned = 0.00183102 Jy
! Component: 2650  -  total flux cleaned = 0.00185862 Jy
! Component: 2700  -  total flux cleaned = 0.00181763 Jy
! Component: 2750  -  total flux cleaned = 0.00181766 Jy
! Component: 2800  -  total flux cleaned = 0.00179079 Jy
! Component: 2850  -  total flux cleaned = 0.00187093 Jy
! Component: 2900  -  total flux cleaned = 0.00181788 Jy
! Component: 2950  -  total flux cleaned = 0.0018572 Jy
! Component: 3000  -  total flux cleaned = 0.00188316 Jy
! Component: 3050  -  total flux cleaned = 0.00181834 Jy
! Component: 3100  -  total flux cleaned = 0.00181837 Jy
! Component: 3150  -  total flux cleaned = 0.00181825 Jy
! Component: 3200  -  total flux cleaned = 0.00181836 Jy
! Component: 3250  -  total flux cleaned = 0.00180579 Jy
! Component: 3300  -  total flux cleaned = 0.00186831 Jy
! Component: 3350  -  total flux cleaned = 0.00185576 Jy
! Component: 3400  -  total flux cleaned = 0.00184345 Jy
! Component: 3450  -  total flux cleaned = 0.00188022 Jy
! Component: 3500  -  total flux cleaned = 0.0018559 Jy
! Component: 3550  -  total flux cleaned = 0.00189211 Jy
! Component: 3600  -  total flux cleaned = 0.00189215 Jy
! Component: 3650  -  total flux cleaned = 0.00193996 Jy
! Component: 3700  -  total flux cleaned = 0.00190427 Jy
! Component: 3750  -  total flux cleaned = 0.00195136 Jy
! Component: 3800  -  total flux cleaned = 0.00193967 Jy
! Component: 3850  -  total flux cleaned = 0.00199773 Jy
! Component: 3900  -  total flux cleaned = 0.00204385 Jy
! Component: 3950  -  total flux cleaned = 0.00200954 Jy
! Component: 4000  -  total flux cleaned = 0.00202097 Jy
! Component: 4050  -  total flux cleaned = 0.00203233 Jy
! Total flux subtracted in 4096 components = 0.00211106 Jy
! Clean residual min=-0.000786 max=0.000662 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.243244 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 407 components and 0.243244 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0628+2835_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.428 x 6.836 at 1.055 degrees (North through East)
! Clean map  min=-0.0011768  max=0.16606 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0628+2835_S_map.fits
wmodel /vlbi/uf001/uva//J0628+2835_S_map.mod
! Writing 407 model components to file: /vlbi/uf001/uva//J0628+2835_S_map.mod
wobs   /vlbi/uf001/uva//J0628+2835_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0628+2835_S_uvs.fits
wwins  /vlbi/uf001/uva//J0628+2835_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0628+2835_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.166062 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000205472 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.371197 0.371197 0.742394 1.48479 2.96958 5.93915 11.8783 23.7566 47.5132 95.0264
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.166 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  808.196 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0628+2835_S_dfm.log closed on Sun Jan 13 23:00:44 2019