! Started logfile: /vlbi/uf001/uva//J0624-0103_S_dfm.log on Sun Jan 13 22:59:25 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0624-0103_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0624-0103_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.929045 visibilities/baseline/integration-bin.
! Found source: J0624-0103
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7149 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0624-0103_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010866Jy  sigma=21.830281
! Fit after  self-cal, rms=0.932398Jy  sigma=20.076426
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.732 mas, bmaj=7.006 mas, bpa=-2.5 degrees
! Estimated noise=0.484034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525223 Jy
! Component: 100  -  total flux cleaned = 0.0668684 Jy
! Total flux subtracted in 100 components = 0.0668684 Jy
! Clean residual min=-0.004557 max=0.011793 Jy/beam
! Clean residual mean=0.000010 rms=0.001256 Jy/beam
! Combined flux in latest and established models = 0.0668684 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0668684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070076Jy  sigma=1.447415
! Fit after  self-cal, rms=0.068677Jy  sigma=1.419846
! Inverting map 
! Added new window around map position (-3.5, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119836 Jy
! Component: 100  -  total flux cleaned = 0.0191497 Jy
! Total flux subtracted in 100 components = 0.0191497 Jy
! Clean residual min=-0.003423 max=0.004402 Jy/beam
! Clean residual mean=0.000006 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.0860181 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 29 components and 0.0860181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066130Jy  sigma=1.359447
! Fit after  self-cal, rms=0.065961Jy  sigma=1.356354
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00551154 Jy
! Component: 100  -  total flux cleaned = 0.00922923 Jy
! Total flux subtracted in 100 components = 0.00922923 Jy
! Clean residual min=-0.002575 max=0.003328 Jy/beam
! Clean residual mean=0.000003 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.0952474 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 37 components and 0.0952473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065322Jy  sigma=1.340922
! Fit after  self-cal, rms=0.065295Jy  sigma=1.340476
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=7.978 mas, bpa=-3.868 degrees
! Estimated noise=0.397424 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7.5, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464345 Jy
! Component: 100  -  total flux cleaned = 0.00761959 Jy
! Component: 150  -  total flux cleaned = 0.00974828 Jy
! Component: 200  -  total flux cleaned = 0.0112124 Jy
! Total flux subtracted in 200 components = 0.0112124 Jy
! Clean residual min=-0.002380 max=0.002141 Jy/beam
! Clean residual mean=0.000002 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.10646 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 74 components and 0.10646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064923Jy  sigma=1.331425
! Fit after  self-cal, rms=0.064893Jy  sigma=1.330806
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.2 x 7.978 at -3.868 degrees (North through East)
! Clean map  min=-0.0022344  max=0.068591 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.95     HN        1.00     KP        1.00     
!   LA        0.95     MK        1.06     NL        1.05     OV        1.00     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        1.02     KP        1.03     
!   LA        0.94     MK        0.98     NL        1.05     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.95     HN        0.98     KP        1.03     
!   LA        0.95     MK        1.00     NL        0.97     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.064893Jy  sigma=1.330806
! Fit after  self-cal, rms=0.064331Jy  sigma=1.328147
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.216 mas, bmaj=8.031 mas, bpa=-3.86 degrees
! Estimated noise=0.393664 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114535 Jy
! Component: 100  -  total flux cleaned = 0.000227428 Jy
! Component: 150  -  total flux cleaned = 0.000228862 Jy
! Component: 200  -  total flux cleaned = 0.000228278 Jy
! Total flux subtracted in 200 components = 0.000228278 Jy
! Clean residual min=-0.002055 max=0.002255 Jy/beam
! Clean residual mean=-0.000003 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.106688 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 90 components and 0.106688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064297Jy  sigma=1.327332
! Fit after  self-cal, rms=0.064311Jy  sigma=1.327171
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064311Jy  sigma=1.327171
! Fit after  self-cal, rms=0.065164Jy  sigma=1.322777
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.211 mas, bmaj=8.031 mas, bpa=-3.754 degrees
! Estimated noise=0.393957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016245 Jy
! Component: 100  -  total flux cleaned = 0.000221905 Jy
! Component: 150  -  total flux cleaned = 0.000324963 Jy
! Component: 200  -  total flux cleaned = 0.000346961 Jy
! Total flux subtracted in 200 components = 0.000346961 Jy
! Clean residual min=-0.001918 max=0.002111 Jy/beam
! Clean residual mean=-0.000001 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.107035 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 107 components and 0.107035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065137Jy  sigma=1.322217
! Fit after  self-cal, rms=0.065155Jy  sigma=1.322037
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.1012e-05 Jy
! Component: 100  -  total flux cleaned = 0.000116141 Jy
! Component: 150  -  total flux cleaned = 0.000136838 Jy
! Component: 200  -  total flux cleaned = 0.000174571 Jy
! Total flux subtracted in 200 components = 0.000174571 Jy
! Clean residual min=-0.001907 max=0.002107 Jy/beam
! Clean residual mean=-0.000002 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.10721 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 114 components and 0.10721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065143Jy  sigma=1.321773
! Fit after  self-cal, rms=0.065141Jy  sigma=1.321755
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065141Jy  sigma=1.321755
! Fit after  self-cal, rms=0.065282Jy  sigma=1.321683
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.211 mas, bmaj=8.029 mas, bpa=-3.723 degrees
! Estimated noise=0.393419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.21218e-05 Jy
! Component: 100  -  total flux cleaned = 8.13962e-05 Jy
! Component: 150  -  total flux cleaned = 9.92453e-05 Jy
! Component: 200  -  total flux cleaned = 9.93794e-05 Jy
! Total flux subtracted in 200 components = 9.93794e-05 Jy
! Clean residual min=-0.001891 max=0.002071 Jy/beam
! Clean residual mean=-0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.107309 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 118 components and 0.107309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065271Jy  sigma=1.321481
! Fit after  self-cal, rms=0.065273Jy  sigma=1.321467
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.28971e-05 Jy
! Component: 100  -  total flux cleaned = 4.95629e-05 Jy
! Component: 150  -  total flux cleaned = 6.56945e-05 Jy
! Component: 200  -  total flux cleaned = 9.50811e-05 Jy
! Total flux subtracted in 200 components = 9.50811e-05 Jy
! Clean residual min=-0.001892 max=0.002059 Jy/beam
! Clean residual mean=-0.000001 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.107404 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 121 components and 0.107404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065266Jy  sigma=1.321325
! Fit after  self-cal, rms=0.065265Jy  sigma=1.321316
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065265Jy  sigma=1.321316
! Fit after  self-cal, rms=0.065336Jy  sigma=1.321302
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.491 mas, bmaj=12.92 mas, bpa=-4.894 degrees
! Estimated noise=0.498683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000395197 Jy
! Component: 100  -  total flux cleaned = 0.000421971 Jy
! Component: 150  -  total flux cleaned = 0.000421559 Jy
! Component: 200  -  total flux cleaned = 0.000421941 Jy
! Total flux subtracted in 200 components = 0.000421941 Jy
! Clean residual min=-0.002231 max=0.002751 Jy/beam
! Clean residual mean=-0.000003 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.107826 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 136 components and 0.107826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065337Jy  sigma=1.321341
! Fit after  self-cal, rms=0.065339Jy  sigma=1.321319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159321 Jy
! Component: 100  -  total flux cleaned = 0.000199802 Jy
! Component: 150  -  total flux cleaned = 0.000200087 Jy
! Component: 200  -  total flux cleaned = 0.000208879 Jy
! Total flux subtracted in 200 components = 0.000208879 Jy
! Clean residual min=-0.002236 max=0.002738 Jy/beam
! Clean residual mean=-0.000002 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.108035 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 141 components and 0.108035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065341Jy  sigma=1.321376
! Fit after  self-cal, rms=0.065341Jy  sigma=1.321369
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=8.025 mas, bpa=-3.663 degrees
! Estimated noise=0.393325 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.213 x 8.025 at -3.663 degrees (North through East)
! Clean map  min=-0.002055  max=0.067683 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.736 mas, bmaj=7.048 mas, bpa=-2.427 degrees
! Estimated noise=0.481375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0527293 Jy
! Component: 100  -  total flux cleaned = 0.0700172 Jy
! Component: 150  -  total flux cleaned = 0.0806623 Jy
! Component: 200  -  total flux cleaned = 0.0874824 Jy
! Total flux subtracted in 200 components = 0.0874824 Jy
! Clean residual min=-0.002739 max=0.003719 Jy/beam
! Clean residual mean=0.000003 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.0874823 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0874823 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=8.025 mas, bpa=-3.663 degrees
! Estimated noise=0.393325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00655532 Jy
! Component: 100  -  total flux cleaned = 0.0109522 Jy
! Component: 150  -  total flux cleaned = 0.0139956 Jy
! Component: 200  -  total flux cleaned = 0.0161335 Jy
! Total flux subtracted in 200 components = 0.0161335 Jy
! Clean residual min=-0.002052 max=0.002078 Jy/beam
! Clean residual mean=0.000001 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.103616 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 59 components and 0.103616 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.491 mas, bmaj=12.92 mas, bpa=-4.894 degrees
! Estimated noise=0.498683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021871 Jy
! Component: 100  -  total flux cleaned = 0.0033273 Jy
! Component: 150  -  total flux cleaned = 0.00364194 Jy
! Component: 200  -  total flux cleaned = 0.00386757 Jy
! Total flux subtracted in 200 components = 0.00386757 Jy
! Clean residual min=-0.002186 max=0.002790 Jy/beam
! Clean residual mean=-0.000001 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.107483 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207745 Jy
! Component: 100  -  total flux cleaned = 0.00035971 Jy
! Component: 150  -  total flux cleaned = 0.000487755 Jy
! Component: 200  -  total flux cleaned = 0.000584221 Jy
! Total flux subtracted in 200 components = 0.000584221 Jy
! Clean residual min=-0.002221 max=0.002739 Jy/beam
! Clean residual mean=-0.000002 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.108068 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 114 components and 0.108068 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=8.025 mas, bpa=-3.663 degrees
! Estimated noise=0.393325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.35153e-05 Jy
! Component: 100  -  total flux cleaned = -0.000116159 Jy
! Component: 150  -  total flux cleaned = -0.000115167 Jy
! Component: 200  -  total flux cleaned = -8.91154e-05 Jy
! Total flux subtracted in 200 components = -8.91154e-05 Jy
! Clean residual min=-0.001904 max=0.002070 Jy/beam
! Clean residual mean=-0.000001 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.107978 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 131 components and 0.107978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065377Jy  sigma=1.322204
! Fit after  self-cal, rms=0.065373Jy  sigma=1.322133
wmodel J0624-0103_S_map.mod
! Writing 131 model components to file: J0624-0103_S_map.mod
wobs   J0624-0103_S_uvs.fits
! Writing UV FITS file: J0624-0103_S_uvs.fits
wwins  J0624-0103_S_map.win
! wwins: Wrote 3 windows to J0624-0103_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000530871 Jy
! Component: 100  -  total flux cleaned = 0.000699688 Jy
! Component: 150  -  total flux cleaned = 0.000894306 Jy
! Component: 200  -  total flux cleaned = 0.00114521 Jy
! Component: 250  -  total flux cleaned = 0.00135883 Jy
! Component: 300  -  total flux cleaned = 0.00165581 Jy
! Component: 350  -  total flux cleaned = 0.00191619 Jy
! Component: 400  -  total flux cleaned = 0.0020855 Jy
! Component: 450  -  total flux cleaned = 0.00236196 Jy
! Component: 500  -  total flux cleaned = 0.00260582 Jy
! Component: 550  -  total flux cleaned = 0.00289798 Jy
! Component: 600  -  total flux cleaned = 0.00308038 Jy
! Component: 650  -  total flux cleaned = 0.00323419 Jy
! Component: 700  -  total flux cleaned = 0.00335995 Jy
! Component: 750  -  total flux cleaned = 0.00348381 Jy
! Component: 800  -  total flux cleaned = 0.00362971 Jy
! Component: 850  -  total flux cleaned = 0.00370109 Jy
! Component: 900  -  total flux cleaned = 0.00384215 Jy
! Component: 950  -  total flux cleaned = 0.00393473 Jy
! Component: 1000  -  total flux cleaned = 0.00395747 Jy
! Component: 1050  -  total flux cleaned = 0.00407094 Jy
! Component: 1100  -  total flux cleaned = 0.0042047 Jy
! Component: 1150  -  total flux cleaned = 0.00422669 Jy
! Component: 1200  -  total flux cleaned = 0.00439955 Jy
! Component: 1250  -  total flux cleaned = 0.00435678 Jy
! Component: 1300  -  total flux cleaned = 0.00442015 Jy
! Component: 1350  -  total flux cleaned = 0.00454475 Jy
! Component: 1400  -  total flux cleaned = 0.00464749 Jy
! Component: 1450  -  total flux cleaned = 0.00464735 Jy
! Component: 1500  -  total flux cleaned = 0.00468777 Jy
! Component: 1550  -  total flux cleaned = 0.00466818 Jy
! Component: 1600  -  total flux cleaned = 0.00468786 Jy
! Component: 1650  -  total flux cleaned = 0.0047458 Jy
! Component: 1700  -  total flux cleaned = 0.00474546 Jy
! Component: 1750  -  total flux cleaned = 0.00470747 Jy
! Component: 1800  -  total flux cleaned = 0.00468902 Jy
! Component: 1850  -  total flux cleaned = 0.00472608 Jy
! Component: 1900  -  total flux cleaned = 0.00468959 Jy
! Component: 1950  -  total flux cleaned = 0.00463515 Jy
! Component: 2000  -  total flux cleaned = 0.00461719 Jy
! Component: 2050  -  total flux cleaned = 0.00459944 Jy
! Component: 2100  -  total flux cleaned = 0.00456439 Jy
! Component: 2150  -  total flux cleaned = 0.00456427 Jy
! Component: 2200  -  total flux cleaned = 0.00454686 Jy
! Component: 2250  -  total flux cleaned = 0.00449565 Jy
! Component: 2300  -  total flux cleaned = 0.00451261 Jy
! Component: 2350  -  total flux cleaned = 0.00437841 Jy
! Component: 2400  -  total flux cleaned = 0.00439503 Jy
! Component: 2450  -  total flux cleaned = 0.00428009 Jy
! Component: 2500  -  total flux cleaned = 0.00424751 Jy
! Component: 2550  -  total flux cleaned = 0.00424777 Jy
! Component: 2600  -  total flux cleaned = 0.00419977 Jy
! Component: 2650  -  total flux cleaned = 0.00415214 Jy
! Component: 2700  -  total flux cleaned = 0.00418349 Jy
! Component: 2750  -  total flux cleaned = 0.00413659 Jy
! Component: 2800  -  total flux cleaned = 0.00401285 Jy
! Component: 2850  -  total flux cleaned = 0.00410458 Jy
! Component: 2900  -  total flux cleaned = 0.00402829 Jy
! Component: 2950  -  total flux cleaned = 0.0039228 Jy
! Component: 3000  -  total flux cleaned = 0.00393783 Jy
! Component: 3050  -  total flux cleaned = 0.0039378 Jy
! Component: 3100  -  total flux cleaned = 0.00389359 Jy
! Component: 3150  -  total flux cleaned = 0.0038206 Jy
! Component: 3200  -  total flux cleaned = 0.00377703 Jy
! Component: 3250  -  total flux cleaned = 0.00367648 Jy
! Component: 3300  -  total flux cleaned = 0.00374768 Jy
! Component: 3350  -  total flux cleaned = 0.00370503 Jy
! Component: 3400  -  total flux cleaned = 0.00364874 Jy
! Component: 3450  -  total flux cleaned = 0.003621 Jy
! Component: 3500  -  total flux cleaned = 0.00364861 Jy
! Component: 3550  -  total flux cleaned = 0.00360732 Jy
! Component: 3600  -  total flux cleaned = 0.00356635 Jy
! Component: 3650  -  total flux cleaned = 0.00355291 Jy
! Component: 3700  -  total flux cleaned = 0.00353957 Jy
! Component: 3750  -  total flux cleaned = 0.00356622 Jy
! Component: 3800  -  total flux cleaned = 0.00357945 Jy
! Component: 3850  -  total flux cleaned = 0.00361899 Jy
! Component: 3900  -  total flux cleaned = 0.00361905 Jy
! Component: 3950  -  total flux cleaned = 0.00365816 Jy
! Component: 4000  -  total flux cleaned = 0.00369689 Jy
! Component: 4050  -  total flux cleaned = 0.00370983 Jy
! Total flux subtracted in 4096 components = 0.00376082 Jy
! Clean residual min=-0.000711 max=0.000651 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.111739 Jy
keep
! Adding 319 model components to the UV plane model.
! The established model now contains 450 components and 0.111739 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0624-0103_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.213 x 8.025 at -3.663 degrees (North through East)
! Clean map  min=-0.0013396  max=0.068186 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0624-0103_S_map.fits
wmodel /vlbi/uf001/uva//J0624-0103_S_map.mod
! Writing 450 model components to file: /vlbi/uf001/uva//J0624-0103_S_map.mod
wobs   /vlbi/uf001/uva//J0624-0103_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0624-0103_S_uvs.fits
wwins  /vlbi/uf001/uva//J0624-0103_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J0624-0103_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0681858 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000235416 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.03577 1.03577 2.07154 4.14309 8.28617 16.5723 33.1447 66.2894
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.068 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  289.639 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0624-0103_S_dfm.log closed on Sun Jan 13 22:59:30 2019