! Started logfile: /vlbi/uf001/uva//J0619+0736_X_dfm.log on Sun Jan 13 22:56:31 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J0619+0736_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0619+0736_X_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.846979 visibilities/baseline/integration-bin.
! Found source: J0619+0736
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 20856 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0619+0736_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002879Jy  sigma=23.146812
! Fit after  self-cal, rms=0.939397Jy  sigma=21.650514
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6334 mas, bmaj=1.587 mas, bpa=-2.762 degrees
! Estimated noise=0.355841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0429627 Jy
! Component: 100  -  total flux cleaned = 0.0588858 Jy
! Total flux subtracted in 100 components = 0.0588858 Jy
! Clean residual min=-0.004656 max=0.007833 Jy/beam
! Clean residual mean=0.000003 rms=0.001034 Jy/beam
! Combined flux in latest and established models = 0.0588858 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0588858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069391Jy  sigma=1.465155
! Fit after  self-cal, rms=0.068791Jy  sigma=1.451124
! Inverting map 
! Added new window around map position (-0.6, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105373 Jy
! Component: 100  -  total flux cleaned = 0.0167725 Jy
! Total flux subtracted in 100 components = 0.0167725 Jy
! Clean residual min=-0.003792 max=0.008116 Jy/beam
! Clean residual mean=0.000001 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.0756582 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.0756582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066481Jy  sigma=1.387732
! Fit after  self-cal, rms=0.066444Jy  sigma=1.386157
! Inverting map 
! Added new window around map position (-1.8, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0072708 Jy
! Component: 100  -  total flux cleaned = 0.0117831 Jy
! Total flux subtracted in 100 components = 0.0117831 Jy
! Clean residual min=-0.003337 max=0.003420 Jy/beam
! Clean residual mean=-0.000000 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0874413 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 16 components and 0.0874413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065333Jy  sigma=1.355493
! Fit after  self-cal, rms=0.065209Jy  sigma=1.352739
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7849 mas, bmaj=1.863 mas, bpa=-3.474 degrees
! Estimated noise=0.223792 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00606503 Jy
! Component: 100  -  total flux cleaned = 0.00969299 Jy
! Component: 150  -  total flux cleaned = 0.0121339 Jy
! Component: 200  -  total flux cleaned = 0.01389 Jy
! Total flux subtracted in 200 components = 0.01389 Jy
! Clean residual min=-0.002348 max=0.002880 Jy/beam
! Clean residual mean=0.000000 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.101331 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 30 components and 0.101331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064625Jy  sigma=1.335916
! Fit after  self-cal, rms=0.064548Jy  sigma=1.333887
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7849 x 1.863 at -3.474 degrees (North through East)
! Clean map  min=-0.0019642  max=0.061623 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.95     LA        0.90     
!   MK        1.02     NL        1.19     OV        0.97     PT        0.99     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.95     LA        0.92     
!   MK        0.97     NL        1.14     OV        0.98     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        0.94     LA        0.91     
!   MK        1.03     NL        1.16     OV        1.04     PT        0.94     
!   SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     HN        1.00     LA        0.90     
!   MK        1.04     NL        1.18     OV        1.00     PT        1.02     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        1.01     LA        0.95     
!   MK        1.06     NL        1.16     OV        0.95     PT        0.96     
!   SC        0.90     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.93     HN        1.03     LA        0.91     
!   MK        1.01     NL        1.19     OV        1.02     PT        0.98     
!   SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.02     LA        0.93     
!   MK        1.01     NL        1.11     OV        0.96     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        0.95     LA        0.93     
!   MK        0.99     NL        1.19     OV        0.96     PT        0.99     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.92     HN        0.97     LA        0.99     
!   MK        1.01     NL        1.15     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.04     HN        0.99     LA        0.91     
!   MK        0.97     NL        1.14     OV        0.96     PT        0.99     
!   SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.91     LA        0.91     
!   MK        0.96     NL        1.14     OV        0.96     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        0.92     LA        0.92     
!   MK        1.00     NL        1.12     OV        0.94     PT        1.04     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.064548Jy  sigma=1.333887
! Fit after  self-cal, rms=0.063385Jy  sigma=1.325190
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7854 mas, bmaj=1.871 mas, bpa=-3.187 degrees
! Estimated noise=0.222268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012805 Jy
! Component: 100  -  total flux cleaned = 0.0015763 Jy
! Component: 150  -  total flux cleaned = 0.00167027 Jy
! Component: 200  -  total flux cleaned = 0.00183171 Jy
! Total flux subtracted in 200 components = 0.00183171 Jy
! Clean residual min=-0.001384 max=0.001456 Jy/beam
! Clean residual mean=0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.103163 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 50 components and 0.103163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063293Jy  sigma=1.322985
! Fit after  self-cal, rms=0.063379Jy  sigma=1.322338
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063379Jy  sigma=1.322338
! Fit after  self-cal, rms=0.063570Jy  sigma=1.318220
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7863 mas, bmaj=1.866 mas, bpa=-3.122 degrees
! Estimated noise=0.222141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536855 Jy
! Component: 100  -  total flux cleaned = 0.000784282 Jy
! Component: 150  -  total flux cleaned = 0.000930448 Jy
! Component: 200  -  total flux cleaned = 0.00103023 Jy
! Total flux subtracted in 200 components = 0.00103023 Jy
! Clean residual min=-0.001233 max=0.001274 Jy/beam
! Clean residual mean=0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.104193 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 54 components and 0.104193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063536Jy  sigma=1.317496
! Fit after  self-cal, rms=0.063559Jy  sigma=1.317241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.6, -46.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000810395 Jy
! Component: 100  -  total flux cleaned = 0.00118755 Jy
! Component: 150  -  total flux cleaned = 0.00137698 Jy
! Component: 200  -  total flux cleaned = 0.00142541 Jy
! Total flux subtracted in 200 components = 0.00142541 Jy
! Clean residual min=-0.001176 max=0.001165 Jy/beam
! Clean residual mean=0.000001 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.105619 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 71 components and 0.105619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063526Jy  sigma=1.316513
! Fit after  self-cal, rms=0.063522Jy  sigma=1.316433
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063522Jy  sigma=1.316433
! Fit after  self-cal, rms=0.063230Jy  sigma=1.316176
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7839 mas, bmaj=1.862 mas, bpa=-3.057 degrees
! Estimated noise=0.220943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030988 Jy
! Component: 100  -  total flux cleaned = 0.000467297 Jy
! Component: 150  -  total flux cleaned = 0.000581643 Jy
! Component: 200  -  total flux cleaned = 0.000685374 Jy
! Total flux subtracted in 200 components = 0.000685374 Jy
! Clean residual min=-0.001087 max=0.001089 Jy/beam
! Clean residual mean=0.000001 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.106304 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 78 components and 0.106304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063209Jy  sigma=1.315762
! Fit after  self-cal, rms=0.063213Jy  sigma=1.315707
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357523 Jy
! Component: 100  -  total flux cleaned = 0.000396968 Jy
! Component: 150  -  total flux cleaned = 0.000378789 Jy
! Component: 200  -  total flux cleaned = 0.00036209 Jy
! Total flux subtracted in 200 components = 0.00036209 Jy
! Clean residual min=-0.001059 max=0.001082 Jy/beam
! Clean residual mean=0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.106666 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 85 components and 0.106666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063202Jy  sigma=1.315473
! Fit after  self-cal, rms=0.063202Jy  sigma=1.315451
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063202Jy  sigma=1.315451
! Fit after  self-cal, rms=0.062794Jy  sigma=1.315394
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.913 mas, bmaj=3.091 mas, bpa=-0.2661 degrees
! Estimated noise=0.291082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000821939 Jy
! Component: 100  -  total flux cleaned = 0.00114598 Jy
! Component: 150  -  total flux cleaned = 0.00114596 Jy
! Component: 200  -  total flux cleaned = 0.00114577 Jy
! Total flux subtracted in 200 components = 0.00114577 Jy
! Clean residual min=-0.001268 max=0.001253 Jy/beam
! Clean residual mean=0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.107812 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.107812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062792Jy  sigma=1.315367
! Fit after  self-cal, rms=0.062786Jy  sigma=1.315307
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207961 Jy
! Component: 100  -  total flux cleaned = 0.000220598 Jy
! Component: 150  -  total flux cleaned = 0.000207943 Jy
! Component: 200  -  total flux cleaned = 0.000207318 Jy
! Total flux subtracted in 200 components = 0.000207318 Jy
! Clean residual min=-0.001227 max=0.001221 Jy/beam
! Clean residual mean=0.000002 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.108019 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 110 components and 0.108019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062786Jy  sigma=1.315323
! Fit after  self-cal, rms=0.062785Jy  sigma=1.315310
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7818 mas, bmaj=1.858 mas, bpa=-3.032 degrees
! Estimated noise=0.219851 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7818 x 1.858 at -3.032 degrees (North through East)
! Clean map  min=-0.0012221  max=0.060218 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6324 mas, bmaj=1.584 mas, bpa=-2.357 degrees
! Estimated noise=0.348121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0420491 Jy
! Component: 100  -  total flux cleaned = 0.0600561 Jy
! Component: 150  -  total flux cleaned = 0.0712891 Jy
! Component: 200  -  total flux cleaned = 0.0790508 Jy
! Total flux subtracted in 200 components = 0.0790508 Jy
! Clean residual min=-0.003181 max=0.004275 Jy/beam
! Clean residual mean=0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.0790508 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0790508 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7818 mas, bmaj=1.858 mas, bpa=-3.032 degrees
! Estimated noise=0.219851 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00829408 Jy
! Component: 100  -  total flux cleaned = 0.0133839 Jy
! Component: 150  -  total flux cleaned = 0.0167994 Jy
! Component: 200  -  total flux cleaned = 0.0193481 Jy
! Total flux subtracted in 200 components = 0.0193481 Jy
! Clean residual min=-0.001451 max=0.001499 Jy/beam
! Clean residual mean=0.000001 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.0983989 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 34 components and 0.0983989 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.913 mas, bmaj=3.091 mas, bpa=-0.2661 degrees
! Estimated noise=0.291082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354401 Jy
! Component: 100  -  total flux cleaned = 0.00573623 Jy
! Component: 150  -  total flux cleaned = 0.00717165 Jy
! Component: 200  -  total flux cleaned = 0.00769443 Jy
! Total flux subtracted in 200 components = 0.00769443 Jy
! Clean residual min=-0.001575 max=0.001302 Jy/beam
! Clean residual mean=0.000002 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.106093 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030946 Jy
! Component: 100  -  total flux cleaned = 0.000602428 Jy
! Component: 150  -  total flux cleaned = 0.000855839 Jy
! Component: 200  -  total flux cleaned = 0.00110122 Jy
! Total flux subtracted in 200 components = 0.00110122 Jy
! Clean residual min=-0.001350 max=0.001175 Jy/beam
! Clean residual mean=0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.107195 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 77 components and 0.107195 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7818 mas, bmaj=1.858 mas, bpa=-3.032 degrees
! Estimated noise=0.219851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117168 Jy
! Component: 100  -  total flux cleaned = -0.000188104 Jy
! Component: 150  -  total flux cleaned = -0.000187899 Jy
! Component: 200  -  total flux cleaned = -0.000104797 Jy
! Total flux subtracted in 200 components = -0.000104797 Jy
! Clean residual min=-0.001079 max=0.001206 Jy/beam
! Clean residual mean=0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.10709 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 94 components and 0.10709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062808Jy  sigma=1.315925
! Fit after  self-cal, rms=0.062814Jy  sigma=1.315730
wmodel J0619+0736_X_map.mod
! Writing 94 model components to file: J0619+0736_X_map.mod
wobs   J0619+0736_X_uvs.fits
! Writing UV FITS file: J0619+0736_X_uvs.fits
wwins  J0619+0736_X_map.win
! wwins: Wrote 5 windows to J0619+0736_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000286333 Jy
! Component: 100  -  total flux cleaned = 0.000457385 Jy
! Component: 150  -  total flux cleaned = 0.000621998 Jy
! Component: 200  -  total flux cleaned = 0.000798809 Jy
! Component: 250  -  total flux cleaned = 0.000885067 Jy
! Component: 300  -  total flux cleaned = 0.00105372 Jy
! Component: 350  -  total flux cleaned = 0.00116948 Jy
! Component: 400  -  total flux cleaned = 0.00131534 Jy
! Component: 450  -  total flux cleaned = 0.00142637 Jy
! Component: 500  -  total flux cleaned = 0.0014732 Jy
! Component: 550  -  total flux cleaned = 0.0015656 Jy
! Component: 600  -  total flux cleaned = 0.00159582 Jy
! Component: 650  -  total flux cleaned = 0.00164062 Jy
! Component: 700  -  total flux cleaned = 0.00169963 Jy
! Component: 750  -  total flux cleaned = 0.00175775 Jy
! Component: 800  -  total flux cleaned = 0.00178649 Jy
! Component: 850  -  total flux cleaned = 0.00185723 Jy
! Component: 900  -  total flux cleaned = 0.00188519 Jy
! Component: 950  -  total flux cleaned = 0.00192656 Jy
! Component: 1000  -  total flux cleaned = 0.00198105 Jy
! Component: 1050  -  total flux cleaned = 0.00199452 Jy
! Component: 1100  -  total flux cleaned = 0.00207442 Jy
! Component: 1150  -  total flux cleaned = 0.00212684 Jy
! Component: 1200  -  total flux cleaned = 0.00215281 Jy
! Component: 1250  -  total flux cleaned = 0.00220442 Jy
! Component: 1300  -  total flux cleaned = 0.00225525 Jy
! Component: 1350  -  total flux cleaned = 0.00230563 Jy
! Component: 1400  -  total flux cleaned = 0.00235577 Jy
! Component: 1450  -  total flux cleaned = 0.00240524 Jy
! Component: 1500  -  total flux cleaned = 0.00249106 Jy
! Component: 1550  -  total flux cleaned = 0.00252744 Jy
! Component: 1600  -  total flux cleaned = 0.00257574 Jy
! Component: 1650  -  total flux cleaned = 0.00259971 Jy
! Component: 1700  -  total flux cleaned = 0.0027181 Jy
! Component: 1750  -  total flux cleaned = 0.00270632 Jy
! Component: 1800  -  total flux cleaned = 0.00279939 Jy
! Component: 1850  -  total flux cleaned = 0.00281085 Jy
! Component: 1900  -  total flux cleaned = 0.00282233 Jy
! Component: 1950  -  total flux cleaned = 0.00284499 Jy
! Component: 2000  -  total flux cleaned = 0.00287889 Jy
! Component: 2050  -  total flux cleaned = 0.00289015 Jy
! Component: 2100  -  total flux cleaned = 0.00290132 Jy
! Component: 2150  -  total flux cleaned = 0.00293454 Jy
! Component: 2200  -  total flux cleaned = 0.00292368 Jy
! Component: 2250  -  total flux cleaned = 0.00291291 Jy
! Component: 2300  -  total flux cleaned = 0.00298853 Jy
! Component: 2350  -  total flux cleaned = 0.00295635 Jy
! Component: 2400  -  total flux cleaned = 0.00296695 Jy
! Component: 2450  -  total flux cleaned = 0.00300925 Jy
! Component: 2500  -  total flux cleaned = 0.00301958 Jy
! Component: 2550  -  total flux cleaned = 0.00300911 Jy
! Component: 2600  -  total flux cleaned = 0.00305044 Jy
! Component: 2650  -  total flux cleaned = 0.00302993 Jy
! Component: 2700  -  total flux cleaned = 0.00308096 Jy
! Component: 2750  -  total flux cleaned = 0.0030708 Jy
! Component: 2800  -  total flux cleaned = 0.00313121 Jy
! Component: 2850  -  total flux cleaned = 0.00310104 Jy
! Component: 2900  -  total flux cleaned = 0.00310108 Jy
! Component: 2950  -  total flux cleaned = 0.00312073 Jy
! Component: 3000  -  total flux cleaned = 0.00308141 Jy
! Component: 3050  -  total flux cleaned = 0.00312037 Jy
! Component: 3100  -  total flux cleaned = 0.00313967 Jy
! Component: 3150  -  total flux cleaned = 0.00313967 Jy
! Component: 3200  -  total flux cleaned = 0.00313965 Jy
! Component: 3250  -  total flux cleaned = 0.00313958 Jy
! Component: 3300  -  total flux cleaned = 0.00312073 Jy
! Component: 3350  -  total flux cleaned = 0.00313023 Jy
! Component: 3400  -  total flux cleaned = 0.00311157 Jy
! Component: 3450  -  total flux cleaned = 0.00313019 Jy
! Component: 3500  -  total flux cleaned = 0.00312095 Jy
! Component: 3550  -  total flux cleaned = 0.00311183 Jy
! Component: 3600  -  total flux cleaned = 0.00311188 Jy
! Component: 3650  -  total flux cleaned = 0.00309378 Jy
! Component: 3700  -  total flux cleaned = 0.00310277 Jy
! Component: 3750  -  total flux cleaned = 0.00307591 Jy
! Component: 3800  -  total flux cleaned = 0.00306696 Jy
! Component: 3850  -  total flux cleaned = 0.00308461 Jy
! Component: 3900  -  total flux cleaned = 0.0030582 Jy
! Component: 3950  -  total flux cleaned = 0.00308462 Jy
! Component: 4000  -  total flux cleaned = 0.00309339 Jy
! Component: 4050  -  total flux cleaned = 0.00308472 Jy
! Total flux subtracted in 4096 components = 0.00304151 Jy
! Clean residual min=-0.000673 max=0.000556 Jy/beam
! Clean residual mean=0.000000 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.110131 Jy
keep
! Adding 332 model components to the UV plane model.
! The established model now contains 426 components and 0.110131 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0619+0736_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7818 x 1.858 at -3.032 degrees (North through East)
! Clean map  min=-0.0010956  max=0.05995 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0619+0736_X_map.fits
wmodel /vlbi/uf001/uva//J0619+0736_X_map.mod
! Writing 426 model components to file: /vlbi/uf001/uva//J0619+0736_X_map.mod
wobs   /vlbi/uf001/uva//J0619+0736_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0619+0736_X_uvs.fits
wwins  /vlbi/uf001/uva//J0619+0736_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J0619+0736_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0599502 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000146747 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.734344 0.734344 1.46869 2.93738 5.87476 11.7495 23.499 46.998 93.9961
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  408.527 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0619+0736_X_dfm.log closed on Sun Jan 13 22:56:36 2019