! Started logfile: /vlbi/uf001/uva//J0617-3634_S_a_dfm.log on Sun Jan 13 22:55:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0617-3634_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0617-3634_S_a_uva.fits
! AN table 1: 37 integrations on 21 of 21 possible baselines.
! AN table 2: 37 integrations on 21 of 21 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0617-3634
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4662 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0617-3634_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.054648Jy  sigma=14.072812
! Fit after  self-cal, rms=0.847908Jy  sigma=11.312319
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=13.01 mas, bpa=-0.4922 degrees
! Estimated noise=1.38502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121585 Jy
! Component: 100  -  total flux cleaned = 0.183222 Jy
! Total flux subtracted in 100 components = 0.183222 Jy
! Clean residual min=-0.042602 max=0.042307 Jy/beam
! Clean residual mean=-0.000996 rms=0.013215 Jy/beam
! Combined flux in latest and established models = 0.183222 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.183222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.243805Jy  sigma=2.870619
! Fit after  self-cal, rms=0.243207Jy  sigma=2.862409
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.662 mas, bmaj=15.22 mas, bpa=-1.379 degrees
! Estimated noise=0.807419 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0673534 Jy
! Component: 100  -  total flux cleaned = 0.107536 Jy
! Component: 150  -  total flux cleaned = 0.131966 Jy
! Component: 200  -  total flux cleaned = 0.146908 Jy
! Total flux subtracted in 200 components = 0.146908 Jy
! Clean residual min=-0.053176 max=0.078966 Jy/beam
! Clean residual mean=-0.001272 rms=0.019487 Jy/beam
! Combined flux in latest and established models = 0.330129 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 78 components and 0.330129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.218937Jy  sigma=2.617868
! Fit after  self-cal, rms=0.218462Jy  sigma=2.614087
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.662 x 15.22 at -1.379 degrees (North through East)
! Clean map  min=-0.052029  max=0.13596 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.68     HN        2.24     LA        0.44     NL        2.95     
!   OV        1.98     PT        1.29     SC        1.66     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.81     FD        1.19     LA        0.62     MK        1.39     
!   NL        2.00     OV        1.32     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.68     HN        1.71     LA        0.45     NL        2.61     
!   OV        1.93     PT        1.42     SC        1.73     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.77     FD        1.00     LA        0.71     MK        1.38     
!   NL        1.58     OV        1.09     PT        1.35     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.67     HN        2.16     LA        0.47     NL        2.11     
!   OV        1.89     PT        1.47     SC        1.81     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     FD        1.13     LA        0.65     MK        1.39     
!   NL        1.40     OV        1.22     PT        1.27     
! 
! 
! Fit before self-cal, rms=0.218462Jy  sigma=2.614087
! Fit after  self-cal, rms=0.314373Jy  sigma=2.166847
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.112 mas, bmaj=16.91 mas, bpa=-1.373 degrees
! Estimated noise=0.98582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136565 Jy
! Component: 100  -  total flux cleaned = 0.0161833 Jy
! Component: 150  -  total flux cleaned = 0.0161996 Jy
! Component: 200  -  total flux cleaned = 0.016225 Jy
! Total flux subtracted in 200 components = 0.016225 Jy
! Clean residual min=-0.049644 max=0.084783 Jy/beam
! Clean residual mean=-0.001108 rms=0.017782 Jy/beam
! Combined flux in latest and established models = 0.346354 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 83 components and 0.346354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.309327Jy  sigma=2.156829
! Fit after  self-cal, rms=0.324216Jy  sigma=2.091408
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.324216Jy  sigma=2.091408
! Fit after  self-cal, rms=0.434139Jy  sigma=2.070743
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.227 mas, bmaj=17.2 mas, bpa=0.6825 degrees
! Estimated noise=1.06152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00753354 Jy
! Component: 100  -  total flux cleaned = 0.00954929 Jy
! Component: 150  -  total flux cleaned = 0.0110788 Jy
! Component: 200  -  total flux cleaned = 0.0110798 Jy
! Total flux subtracted in 200 components = 0.0110798 Jy
! Clean residual min=-0.047385 max=0.083867 Jy/beam
! Clean residual mean=-0.001063 rms=0.017725 Jy/beam
! Combined flux in latest and established models = 0.357434 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 92 components and 0.357434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.430364Jy  sigma=2.066117
! Fit after  self-cal, rms=0.432021Jy  sigma=2.059264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (43.5, 27).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0744771 Jy
! Component: 100  -  total flux cleaned = 0.108476 Jy
! Component: 150  -  total flux cleaned = 0.126024 Jy
! Component: 200  -  total flux cleaned = 0.130452 Jy
! Total flux subtracted in 200 components = 0.130452 Jy
! Clean residual min=-0.044878 max=0.049182 Jy/beam
! Clean residual mean=-0.000875 rms=0.016011 Jy/beam
! Combined flux in latest and established models = 0.487886 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 159 components and 0.487886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.407719Jy  sigma=1.937437
! Fit after  self-cal, rms=0.395486Jy  sigma=1.847556
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.395486Jy  sigma=1.847556
! Fit after  self-cal, rms=0.280084Jy  sigma=1.571555
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.377 mas, bmaj=17.86 mas, bpa=2.008 degrees
! Estimated noise=0.949691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0374507 Jy
! Component: 100  -  total flux cleaned = 0.0572096 Jy
! Component: 150  -  total flux cleaned = 0.0664645 Jy
! Component: 200  -  total flux cleaned = 0.0709139 Jy
! Total flux subtracted in 200 components = 0.0709139 Jy
! Clean residual min=-0.025308 max=0.028031 Jy/beam
! Clean residual mean=-0.000403 rms=0.008364 Jy/beam
! Combined flux in latest and established models = 0.5588 Jy
selfcal
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 205 components and 0.5588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.274745Jy  sigma=1.458004
! Fit after  self-cal, rms=0.271795Jy  sigma=1.421226
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012177 Jy
! Component: 100  -  total flux cleaned = 0.0174561 Jy
! Component: 150  -  total flux cleaned = 0.0207876 Jy
! Component: 200  -  total flux cleaned = 0.0223692 Jy
! Total flux subtracted in 200 components = 0.0223692 Jy
! Clean residual min=-0.023431 max=0.025600 Jy/beam
! Clean residual mean=-0.000303 rms=0.007743 Jy/beam
! Combined flux in latest and established models = 0.581169 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 225 components and 0.581169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.270564Jy  sigma=1.414218
! Fit after  self-cal, rms=0.270422Jy  sigma=1.410936
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.270422Jy  sigma=1.410936
! Fit after  self-cal, rms=0.267284Jy  sigma=1.356913
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.103 mas, bmaj=32.11 mas, bpa=7.291 degrees
! Estimated noise=0.910412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140344 Jy
! Component: 100  -  total flux cleaned = 0.0196775 Jy
! Component: 150  -  total flux cleaned = 0.0225258 Jy
! Component: 200  -  total flux cleaned = 0.0241064 Jy
! Total flux subtracted in 200 components = 0.0241064 Jy
! Clean residual min=-0.028039 max=0.026708 Jy/beam
! Clean residual mean=-0.000439 rms=0.008567 Jy/beam
! Combined flux in latest and established models = 0.605275 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 248 components and 0.605275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.266329Jy  sigma=1.348069
! Fit after  self-cal, rms=0.266127Jy  sigma=1.341072
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00380015 Jy
! Component: 100  -  total flux cleaned = 0.00547468 Jy
! Component: 150  -  total flux cleaned = 0.00613161 Jy
! Component: 200  -  total flux cleaned = 0.00673642 Jy
! Total flux subtracted in 200 components = 0.00673642 Jy
! Clean residual min=-0.027092 max=0.025448 Jy/beam
! Clean residual mean=-0.000405 rms=0.008257 Jy/beam
! Combined flux in latest and established models = 0.612011 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 265 components and 0.612011 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.265796Jy  sigma=1.338475
! Fit after  self-cal, rms=0.265818Jy  sigma=1.337356
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.395 mas, bmaj=18.1 mas, bpa=2.275 degrees
! Estimated noise=0.926942 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.395 x 18.1 at 2.275 degrees (North through East)
! Clean map  min=-0.021121  max=0.19528 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.489 mas, bmaj=14.7 mas, bpa=2.696 degrees
! Estimated noise=1.80233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150391 Jy
! Component: 100  -  total flux cleaned = 0.226449 Jy
! Component: 150  -  total flux cleaned = 0.286004 Jy
! Component: 200  -  total flux cleaned = 0.335095 Jy
! Total flux subtracted in 200 components = 0.335095 Jy
! Clean residual min=-0.036067 max=0.035737 Jy/beam
! Clean residual mean=-0.000824 rms=0.010745 Jy/beam
! Combined flux in latest and established models = 0.335096 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 65 model components to the UV plane model.
! The established model now contains 65 components and 0.335096 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.395 mas, bmaj=18.1 mas, bpa=2.275 degrees
! Estimated noise=0.926942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0570745 Jy
! Component: 100  -  total flux cleaned = 0.100953 Jy
! Component: 150  -  total flux cleaned = 0.135579 Jy
! Component: 200  -  total flux cleaned = 0.163158 Jy
! Total flux subtracted in 200 components = 0.163158 Jy
! Clean residual min=-0.028188 max=0.024953 Jy/beam
! Clean residual mean=-0.000667 rms=0.008402 Jy/beam
! Combined flux in latest and established models = 0.498254 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 131 components and 0.498254 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.103 mas, bmaj=32.11 mas, bpa=7.291 degrees
! Estimated noise=0.910412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0314352 Jy
! Component: 100  -  total flux cleaned = 0.0541577 Jy
! Component: 150  -  total flux cleaned = 0.0709992 Jy
! Component: 200  -  total flux cleaned = 0.083752 Jy
! Total flux subtracted in 200 components = 0.083752 Jy
! Clean residual min=-0.028171 max=0.020758 Jy/beam
! Clean residual mean=-0.000575 rms=0.008469 Jy/beam
! Combined flux in latest and established models = 0.582006 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00975821 Jy
! Component: 100  -  total flux cleaned = 0.0172509 Jy
! Component: 150  -  total flux cleaned = 0.0230208 Jy
! Component: 200  -  total flux cleaned = 0.026674 Jy
! Total flux subtracted in 200 components = 0.026674 Jy
! Clean residual min=-0.025984 max=0.022119 Jy/beam
! Clean residual mean=-0.000448 rms=0.008097 Jy/beam
! Combined flux in latest and established models = 0.608679 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 189 components and 0.60868 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.395 mas, bmaj=18.1 mas, bpa=2.275 degrees
! Estimated noise=0.926942 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253977 Jy
! Component: 100  -  total flux cleaned = 0.00344295 Jy
! Component: 150  -  total flux cleaned = 0.00420269 Jy
! Component: 200  -  total flux cleaned = 0.00420486 Jy
! Total flux subtracted in 200 components = 0.00420486 Jy
! Clean residual min=-0.020823 max=0.021070 Jy/beam
! Clean residual mean=-0.000287 rms=0.006264 Jy/beam
! Combined flux in latest and established models = 0.612884 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 211 components and 0.612884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.264947Jy  sigma=1.339466
! Fit after  self-cal, rms=0.263859Jy  sigma=1.332727
wmodel J0617-3634_S_a_map.mod
! Writing 211 model components to file: J0617-3634_S_a_map.mod
wobs   J0617-3634_S_a_uvs.fits
! Writing UV FITS file: J0617-3634_S_a_uvs.fits
wwins  J0617-3634_S_a_map.win
! wwins: Wrote 2 windows to J0617-3634_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285873 Jy
! Component: 100  -  total flux cleaned = 0.0022397 Jy
! Component: 150  -  total flux cleaned = 0.00396567 Jy
! Component: 200  -  total flux cleaned = 0.00583448 Jy
! Component: 250  -  total flux cleaned = 0.00779871 Jy
! Component: 300  -  total flux cleaned = 0.00892826 Jy
! Component: 350  -  total flux cleaned = 0.0101964 Jy
! Component: 400  -  total flux cleaned = 0.0111956 Jy
! Component: 450  -  total flux cleaned = 0.0119585 Jy
! Component: 500  -  total flux cleaned = 0.0128433 Jy
! Component: 550  -  total flux cleaned = 0.0133379 Jy
! Component: 600  -  total flux cleaned = 0.0126979 Jy
! Component: 650  -  total flux cleaned = 0.0120812 Jy
! Component: 700  -  total flux cleaned = 0.0112029 Jy
! Component: 750  -  total flux cleaned = 0.0105069 Jy
! Component: 800  -  total flux cleaned = 0.00984072 Jy
! Component: 850  -  total flux cleaned = 0.00919984 Jy
! Component: 900  -  total flux cleaned = 0.00908085 Jy
! Component: 950  -  total flux cleaned = 0.00860427 Jy
! Component: 1000  -  total flux cleaned = 0.00860662 Jy
! Component: 1050  -  total flux cleaned = 0.0082752 Jy
! Component: 1100  -  total flux cleaned = 0.00838942 Jy
! Component: 1150  -  total flux cleaned = 0.00849457 Jy
! Component: 1200  -  total flux cleaned = 0.00819267 Jy
! Component: 1250  -  total flux cleaned = 0.00819477 Jy
! Component: 1300  -  total flux cleaned = 0.00828599 Jy
! Component: 1350  -  total flux cleaned = 0.00828459 Jy
! Component: 1400  -  total flux cleaned = 0.00837571 Jy
! Component: 1450  -  total flux cleaned = 0.00872366 Jy
! Component: 1500  -  total flux cleaned = 0.00872618 Jy
! Component: 1550  -  total flux cleaned = 0.00897528 Jy
! Component: 1600  -  total flux cleaned = 0.00881141 Jy
! Component: 1650  -  total flux cleaned = 0.00857295 Jy
! Component: 1700  -  total flux cleaned = 0.00857529 Jy
! Component: 1750  -  total flux cleaned = 0.00857632 Jy
! Component: 1800  -  total flux cleaned = 0.0087262 Jy
! Component: 1850  -  total flux cleaned = 0.00857767 Jy
! Component: 1900  -  total flux cleaned = 0.00836089 Jy
! Component: 1950  -  total flux cleaned = 0.0084329 Jy
! Component: 2000  -  total flux cleaned = 0.00836297 Jy
! Component: 2050  -  total flux cleaned = 0.00836331 Jy
! Component: 2100  -  total flux cleaned = 0.00829439 Jy
! Component: 2150  -  total flux cleaned = 0.00816013 Jy
! Component: 2200  -  total flux cleaned = 0.00809499 Jy
! Component: 2250  -  total flux cleaned = 0.00796423 Jy
! Component: 2300  -  total flux cleaned = 0.00783512 Jy
! Component: 2350  -  total flux cleaned = 0.00764326 Jy
! Component: 2400  -  total flux cleaned = 0.00751614 Jy
! Component: 2450  -  total flux cleaned = 0.00726546 Jy
! Component: 2500  -  total flux cleaned = 0.00707988 Jy
! Component: 2550  -  total flux cleaned = 0.00708023 Jy
! Component: 2600  -  total flux cleaned = 0.00732452 Jy
! Component: 2650  -  total flux cleaned = 0.00738457 Jy
! Component: 2700  -  total flux cleaned = 0.00738447 Jy
! Component: 2750  -  total flux cleaned = 0.00750474 Jy
! Component: 2800  -  total flux cleaned = 0.00762445 Jy
! Component: 2850  -  total flux cleaned = 0.00780332 Jy
! Component: 2900  -  total flux cleaned = 0.00798158 Jy
! Component: 2950  -  total flux cleaned = 0.00821883 Jy
! Component: 3000  -  total flux cleaned = 0.00839578 Jy
! Component: 3050  -  total flux cleaned = 0.00857245 Jy
! Component: 3100  -  total flux cleaned = 0.00869003 Jy
! Component: 3150  -  total flux cleaned = 0.00880732 Jy
! Component: 3200  -  total flux cleaned = 0.00892444 Jy
! Component: 3250  -  total flux cleaned = 0.00904108 Jy
! Component: 3300  -  total flux cleaned = 0.00909942 Jy
! Component: 3350  -  total flux cleaned = 0.00909947 Jy
! Component: 3400  -  total flux cleaned = 0.00904116 Jy
! Component: 3450  -  total flux cleaned = 0.00904126 Jy
! Component: 3500  -  total flux cleaned = 0.00898325 Jy
! Component: 3550  -  total flux cleaned = 0.00904168 Jy
! Component: 3600  -  total flux cleaned = 0.00892477 Jy
! Component: 3650  -  total flux cleaned = 0.00880785 Jy
! Component: 3700  -  total flux cleaned = 0.0088666 Jy
! Component: 3750  -  total flux cleaned = 0.00880793 Jy
! Component: 3800  -  total flux cleaned = 0.008749 Jy
! Component: 3850  -  total flux cleaned = 0.00857136 Jy
! Component: 3900  -  total flux cleaned = 0.00851179 Jy
! Component: 3950  -  total flux cleaned = 0.00851174 Jy
! Component: 4000  -  total flux cleaned = 0.00845164 Jy
! Component: 4050  -  total flux cleaned = 0.00839128 Jy
! Total flux subtracted in 4096 components = 0.00833107 Jy
! Clean residual min=-0.003255 max=0.003226 Jy/beam
! Clean residual mean=0.000065 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.621215 Jy
keep
! Adding 325 model components to the UV plane model.
! The established model now contains 536 components and 0.621215 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0617-3634_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.395 x 18.1 at 2.275 degrees (North through East)
! Clean map  min=-0.0074888  max=0.19994 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0617-3634_S_a_map.fits
wmodel /vlbi/uf001/uva//J0617-3634_S_a_map.mod
! Writing 536 model components to file: /vlbi/uf001/uva//J0617-3634_S_a_map.mod
wobs   /vlbi/uf001/uva//J0617-3634_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0617-3634_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J0617-3634_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J0617-3634_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.199941 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00120148 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.80275 1.80275 3.6055 7.21101 14.422 28.844 57.6881
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0036 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.199 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  166.412 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0617-3634_S_a_dfm.log closed on Sun Jan 13 22:55:46 2019