! Started logfile: /vlbi/uf001/uvm//J0615-3117_S_a_dfm.log on Sun Jan 13 20:54:38 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J0615-3117_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J0615-3117_S_a_uvm.fits
! AN table 1: 48 integrations on 21 of 21 possible baselines.
! AN table 2: 74 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.949026 visibilities/baseline/integration-bin.
! Found source: J0615-3117
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 8769 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0615-3117_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.010737Jy  sigma=15.014235
! Fit after  self-cal, rms=0.909731Jy  sigma=13.467662
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.799 mas, bmaj=13.64 mas, bpa=-21.86 degrees
! Estimated noise=0.971322 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0679654 Jy
! Component: 100  -  total flux cleaned = 0.086323 Jy
! Total flux subtracted in 100 components = 0.086323 Jy
! Clean residual min=-0.005904 max=0.008657 Jy/beam
! Clean residual mean=-0.000052 rms=0.001776 Jy/beam
! Combined flux in latest and established models = 0.086323 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.086323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102675Jy  sigma=1.316570
! Fit after  self-cal, rms=0.102439Jy  sigma=1.313372
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.722 mas, bmaj=16.48 mas, bpa=-20.03 degrees
! Estimated noise=0.529084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167511 Jy
! Component: 100  -  total flux cleaned = 0.0255783 Jy
! Component: 150  -  total flux cleaned = 0.0305924 Jy
! Component: 200  -  total flux cleaned = 0.0335964 Jy
! Total flux subtracted in 200 components = 0.0335964 Jy
! Clean residual min=-0.005034 max=0.008609 Jy/beam
! Clean residual mean=-0.000020 rms=0.001593 Jy/beam
! Combined flux in latest and established models = 0.119919 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 77 components and 0.119919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099887Jy  sigma=1.263426
! Fit after  self-cal, rms=0.099958Jy  sigma=1.262321
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.722 x 16.48 at -20.03 degrees (North through East)
! Clean map  min=-0.0049058  max=0.091876 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.87     KP        1.08     LA        1.01     
!   NL        1.20     OV        0.98     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.18     FD        0.88     HN        1.12     KP        1.07     
!   LA        0.87     MK        1.01     NL        1.24     PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        0.97     KP        1.05     LA        0.94     
!   NL        1.16     OV        0.94     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        0.93     HN        1.18     KP        1.04     
!   LA        0.91     MK        1.02     NL        0.76     PT        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     HN        0.98     KP        1.09     LA        1.01     
!   NL        1.14     OV        1.02     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.91     HN        1.03     KP        1.06     
!   LA        0.94     MK        1.06     NL        1.13     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.099958Jy  sigma=1.262321
! Fit after  self-cal, rms=0.100515Jy  sigma=1.245164
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.774 mas, bmaj=16.68 mas, bpa=-20.19 degrees
! Estimated noise=0.52981 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419227 Jy
! Component: 100  -  total flux cleaned = 0.0046849 Jy
! Component: 150  -  total flux cleaned = 0.0044401 Jy
! Component: 200  -  total flux cleaned = 0.00401788 Jy
! Total flux subtracted in 200 components = 0.00401788 Jy
! Clean residual min=-0.003945 max=0.004620 Jy/beam
! Clean residual mean=0.000009 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.123937 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 116 components and 0.123937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099860Jy  sigma=1.237162
! Fit after  self-cal, rms=0.099968Jy  sigma=1.234817
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099968Jy  sigma=1.234817
! Fit after  self-cal, rms=0.098852Jy  sigma=1.220765
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.768 mas, bmaj=16.67 mas, bpa=-20.3 degrees
! Estimated noise=0.526305 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274964 Jy
! Component: 100  -  total flux cleaned = 0.00323572 Jy
! Component: 150  -  total flux cleaned = 0.00339779 Jy
! Component: 200  -  total flux cleaned = 0.0034433 Jy
! Total flux subtracted in 200 components = 0.0034433 Jy
! Clean residual min=-0.002294 max=0.002266 Jy/beam
! Clean residual mean=-0.000002 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.127381 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.127381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098730Jy  sigma=1.219240
! Fit after  self-cal, rms=0.098773Jy  sigma=1.218005
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000905298 Jy
! Component: 100  -  total flux cleaned = 0.000988324 Jy
! Component: 150  -  total flux cleaned = 0.00109661 Jy
! Component: 200  -  total flux cleaned = 0.00116212 Jy
! Total flux subtracted in 200 components = 0.00116212 Jy
! Clean residual min=-0.002210 max=0.002219 Jy/beam
! Clean residual mean=0.000001 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.128543 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 154 components and 0.128543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098735Jy  sigma=1.217528
! Fit after  self-cal, rms=0.098725Jy  sigma=1.217473
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098725Jy  sigma=1.217473
! Fit after  self-cal, rms=0.099690Jy  sigma=1.216980
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.769 mas, bmaj=16.72 mas, bpa=-20.38 degrees
! Estimated noise=0.524892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000942417 Jy
! Component: 100  -  total flux cleaned = 0.0012498 Jy
! Component: 150  -  total flux cleaned = 0.0014089 Jy
! Component: 200  -  total flux cleaned = 0.00146653 Jy
! Total flux subtracted in 200 components = 0.00146653 Jy
! Clean residual min=-0.002055 max=0.002043 Jy/beam
! Clean residual mean=-0.000004 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.130009 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 168 components and 0.130009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099659Jy  sigma=1.216581
! Fit after  self-cal, rms=0.099665Jy  sigma=1.216512
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000285157 Jy
! Component: 100  -  total flux cleaned = 0.000369242 Jy
! Component: 150  -  total flux cleaned = 0.000420789 Jy
! Component: 200  -  total flux cleaned = 0.000470366 Jy
! Total flux subtracted in 200 components = 0.000470366 Jy
! Clean residual min=-0.002030 max=0.002076 Jy/beam
! Clean residual mean=-0.000003 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.13048 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 175 components and 0.13048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099650Jy  sigma=1.216301
! Fit after  self-cal, rms=0.099643Jy  sigma=1.216287
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099643Jy  sigma=1.216287
! Fit after  self-cal, rms=0.100030Jy  sigma=1.216204
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.621 mas, bmaj=30.78 mas, bpa=-7.93 degrees
! Estimated noise=0.585523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00082571 Jy
! Component: 100  -  total flux cleaned = 0.00104075 Jy
! Component: 150  -  total flux cleaned = 0.0011274 Jy
! Component: 200  -  total flux cleaned = 0.00114554 Jy
! Total flux subtracted in 200 components = 0.00114554 Jy
! Clean residual min=-0.001977 max=0.002156 Jy/beam
! Clean residual mean=-0.000011 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.131625 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 198 components and 0.131625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100022Jy  sigma=1.216053
! Fit after  self-cal, rms=0.100023Jy  sigma=1.216015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00023551 Jy
! Component: 100  -  total flux cleaned = 0.000275389 Jy
! Component: 150  -  total flux cleaned = 0.000292548 Jy
! Component: 200  -  total flux cleaned = 0.000308655 Jy
! Total flux subtracted in 200 components = 0.000308655 Jy
! Clean residual min=-0.001985 max=0.002053 Jy/beam
! Clean residual mean=-0.000009 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.131934 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 206 components and 0.131934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100019Jy  sigma=1.215947
! Fit after  self-cal, rms=0.100016Jy  sigma=1.215930
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.776 mas, bmaj=16.76 mas, bpa=-20.41 degrees
! Estimated noise=0.525043 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.776 x 16.76 at -20.41 degrees (North through East)
! Clean map  min=-0.0029676  max=0.091307 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.84 mas, bmaj=13.88 mas, bpa=-22.03 degrees
! Estimated noise=0.988951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068281 Jy
! Component: 100  -  total flux cleaned = 0.0864697 Jy
! Component: 150  -  total flux cleaned = 0.0968116 Jy
! Component: 200  -  total flux cleaned = 0.104455 Jy
! Total flux subtracted in 200 components = 0.104455 Jy
! Clean residual min=-0.004603 max=0.004473 Jy/beam
! Clean residual mean=-0.000030 rms=0.001192 Jy/beam
! Combined flux in latest and established models = 0.104455 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.104455 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.776 mas, bmaj=16.76 mas, bpa=-20.41 degrees
! Estimated noise=0.525043 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00954992 Jy
! Component: 100  -  total flux cleaned = 0.0156812 Jy
! Component: 150  -  total flux cleaned = 0.0196085 Jy
! Component: 200  -  total flux cleaned = 0.021528 Jy
! Total flux subtracted in 200 components = 0.021528 Jy
! Clean residual min=-0.002501 max=0.002703 Jy/beam
! Clean residual mean=-0.000012 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.125983 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 96 components and 0.125983 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.621 mas, bmaj=30.78 mas, bpa=-7.93 degrees
! Estimated noise=0.585523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00313125 Jy
! Component: 100  -  total flux cleaned = 0.00429027 Jy
! Component: 150  -  total flux cleaned = 0.00516304 Jy
! Component: 200  -  total flux cleaned = 0.00577703 Jy
! Total flux subtracted in 200 components = 0.00577703 Jy
! Clean residual min=-0.002178 max=0.002327 Jy/beam
! Clean residual mean=-0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.13176 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000284036 Jy
! Component: 100  -  total flux cleaned = 0.000517037 Jy
! Component: 150  -  total flux cleaned = 0.000575533 Jy
! Component: 200  -  total flux cleaned = 0.000601468 Jy
! Total flux subtracted in 200 components = 0.000601468 Jy
! Clean residual min=-0.002011 max=0.002160 Jy/beam
! Clean residual mean=-0.000002 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.132362 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 167 components and 0.132362 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.776 mas, bmaj=16.76 mas, bpa=-20.41 degrees
! Estimated noise=0.525043 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155278 Jy
! Component: 100  -  total flux cleaned = -0.000153804 Jy
! Component: 150  -  total flux cleaned = -0.000153141 Jy
! Component: 200  -  total flux cleaned = -0.000181656 Jy
! Total flux subtracted in 200 components = -0.000181656 Jy
! Clean residual min=-0.002045 max=0.001991 Jy/beam
! Clean residual mean=-0.000001 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.13218 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 189 components and 0.13218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100031Jy  sigma=1.216241
! Fit after  self-cal, rms=0.100004Jy  sigma=1.215934
wmodel J0615-3117_S_a_map.mod
! Writing 189 model components to file: J0615-3117_S_a_map.mod
wobs   J0615-3117_S_a_uvs.fits
! Writing UV FITS file: J0615-3117_S_a_uvs.fits
wwins  J0615-3117_S_a_map.win
! wwins: Wrote 2 windows to J0615-3117_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.46153e-05 Jy
! Component: 100  -  total flux cleaned = -0.000142662 Jy
! Component: 150  -  total flux cleaned = -0.000400155 Jy
! Component: 200  -  total flux cleaned = -0.000739569 Jy
! Component: 250  -  total flux cleaned = -0.00103688 Jy
! Component: 300  -  total flux cleaned = -0.00120952 Jy
! Component: 350  -  total flux cleaned = -0.00132224 Jy
! Component: 400  -  total flux cleaned = -0.00137695 Jy
! Component: 450  -  total flux cleaned = -0.00135078 Jy
! Component: 500  -  total flux cleaned = -0.00140306 Jy
! Component: 550  -  total flux cleaned = -0.00140402 Jy
! Component: 600  -  total flux cleaned = -0.00145342 Jy
! Component: 650  -  total flux cleaned = -0.00145297 Jy
! Component: 700  -  total flux cleaned = -0.0014294 Jy
! Component: 750  -  total flux cleaned = -0.00142952 Jy
! Component: 800  -  total flux cleaned = -0.00152098 Jy
! Component: 850  -  total flux cleaned = -0.00163239 Jy
! Component: 900  -  total flux cleaned = -0.00174151 Jy
! Component: 950  -  total flux cleaned = -0.00178454 Jy
! Component: 1000  -  total flux cleaned = -0.00182698 Jy
! Component: 1050  -  total flux cleaned = -0.00184756 Jy
! Component: 1100  -  total flux cleaned = -0.00186783 Jy
! Component: 1150  -  total flux cleaned = -0.00186811 Jy
! Component: 1200  -  total flux cleaned = -0.00186862 Jy
! Component: 1250  -  total flux cleaned = -0.00192728 Jy
! Component: 1300  -  total flux cleaned = -0.00196512 Jy
! Component: 1350  -  total flux cleaned = -0.00196503 Jy
! Component: 1400  -  total flux cleaned = -0.00196556 Jy
! Component: 1450  -  total flux cleaned = -0.00198404 Jy
! Component: 1500  -  total flux cleaned = -0.00205716 Jy
! Component: 1550  -  total flux cleaned = -0.00198538 Jy
! Component: 1600  -  total flux cleaned = -0.00198562 Jy
! Component: 1650  -  total flux cleaned = -0.00195097 Jy
! Component: 1700  -  total flux cleaned = -0.00193375 Jy
! Component: 1750  -  total flux cleaned = -0.00184849 Jy
! Component: 1800  -  total flux cleaned = -0.0018651 Jy
! Component: 1850  -  total flux cleaned = -0.00181512 Jy
! Component: 1900  -  total flux cleaned = -0.00178261 Jy
! Component: 1950  -  total flux cleaned = -0.00184751 Jy
! Component: 2000  -  total flux cleaned = -0.00183133 Jy
! Component: 2050  -  total flux cleaned = -0.00187902 Jy
! Component: 2100  -  total flux cleaned = -0.00194183 Jy
! Component: 2150  -  total flux cleaned = -0.00195715 Jy
! Component: 2200  -  total flux cleaned = -0.00203404 Jy
! Component: 2250  -  total flux cleaned = -0.00201863 Jy
! Component: 2300  -  total flux cleaned = -0.00201901 Jy
! Component: 2350  -  total flux cleaned = -0.00206372 Jy
! Component: 2400  -  total flux cleaned = -0.00207829 Jy
! Component: 2450  -  total flux cleaned = -0.00207847 Jy
! Component: 2500  -  total flux cleaned = -0.00209298 Jy
! Component: 2550  -  total flux cleaned = -0.00210736 Jy
! Component: 2600  -  total flux cleaned = -0.0020648 Jy
! Component: 2650  -  total flux cleaned = -0.00200876 Jy
! Component: 2700  -  total flux cleaned = -0.00199492 Jy
! Component: 2750  -  total flux cleaned = -0.00193954 Jy
! Component: 2800  -  total flux cleaned = -0.00189842 Jy
! Component: 2850  -  total flux cleaned = -0.00188481 Jy
! Component: 2900  -  total flux cleaned = -0.00185789 Jy
! Component: 2950  -  total flux cleaned = -0.00185792 Jy
! Component: 3000  -  total flux cleaned = -0.00184451 Jy
! Component: 3050  -  total flux cleaned = -0.00185771 Jy
! Component: 3100  -  total flux cleaned = -0.00181845 Jy
! Component: 3150  -  total flux cleaned = -0.00185742 Jy
! Component: 3200  -  total flux cleaned = -0.00181883 Jy
! Component: 3250  -  total flux cleaned = -0.00184456 Jy
! Component: 3300  -  total flux cleaned = -0.00181899 Jy
! Component: 3350  -  total flux cleaned = -0.00185702 Jy
! Component: 3400  -  total flux cleaned = -0.0018318 Jy
! Component: 3450  -  total flux cleaned = -0.00183183 Jy
! Component: 3500  -  total flux cleaned = -0.00188124 Jy
! Component: 3550  -  total flux cleaned = -0.00191792 Jy
! Component: 3600  -  total flux cleaned = -0.0018813 Jy
! Component: 3650  -  total flux cleaned = -0.00186922 Jy
! Component: 3700  -  total flux cleaned = -0.00189336 Jy
! Component: 3750  -  total flux cleaned = -0.00189343 Jy
! Component: 3800  -  total flux cleaned = -0.00188156 Jy
! Component: 3850  -  total flux cleaned = -0.00185805 Jy
! Component: 3900  -  total flux cleaned = -0.00190516 Jy
! Component: 3950  -  total flux cleaned = -0.00185829 Jy
! Component: 4000  -  total flux cleaned = -0.00181177 Jy
! Component: 4050  -  total flux cleaned = -0.00181178 Jy
! Total flux subtracted in 4096 components = -0.00180037 Jy
! Clean residual min=-0.000787 max=0.000647 Jy/beam
! Clean residual mean=-0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.13038 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 462 components and 0.13038 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J0615-3117_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.776 x 16.76 at -20.41 degrees (North through East)
! Clean map  min=-0.0028704  max=0.091855 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J0615-3117_S_a_map.fits
wmodel /vlbi/uf001/uvm//J0615-3117_S_a_map.mod
! Writing 462 model components to file: /vlbi/uf001/uvm//J0615-3117_S_a_map.mod
wobs   /vlbi/uf001/uvm//J0615-3117_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J0615-3117_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J0615-3117_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uvm//J0615-3117_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0918553 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000224467 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.73311 0.73311 1.46622 2.93244 5.86488 11.7298 23.4595 46.919 93.8381
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.091 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  409.215 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J0615-3117_S_a_dfm.log closed on Sun Jan 13 20:54:43 2019