! Started logfile: /vlbi/uf001/uva//J0608-3847_S_dfm.log on Sun Jan 13 22:51:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J0608-3847_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J0608-3847_S_uva.fits
! AN table 1: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.991954 visibilities/baseline/integration-bin.
! Found source: J0608-3847
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2589 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0608-3847_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005213Jy  sigma=13.945728
! Fit after  self-cal, rms=0.898764Jy  sigma=12.418824
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.86 mas, bmaj=42.33 mas, bpa=-5.611 degrees
! Estimated noise=1.15901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0828154 Jy
! Component: 100  -  total flux cleaned = 0.103041 Jy
! Total flux subtracted in 100 components = 0.103041 Jy
! Clean residual min=-0.006699 max=0.008100 Jy/beam
! Clean residual mean=-0.000130 rms=0.002456 Jy/beam
! Combined flux in latest and established models = 0.103041 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.103041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088251Jy  sigma=1.157815
! Fit after  self-cal, rms=0.088183Jy  sigma=1.156791
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.517 mas, bmaj=46.6 mas, bpa=-5.045 degrees
! Estimated noise=1.03628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00953396 Jy
! Component: 100  -  total flux cleaned = 0.0139927 Jy
! Component: 150  -  total flux cleaned = 0.0147604 Jy
! Component: 200  -  total flux cleaned = 0.0148433 Jy
! Total flux subtracted in 200 components = 0.0148433 Jy
! Clean residual min=-0.004423 max=0.005153 Jy/beam
! Clean residual mean=-0.000052 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 0.117884 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 86 components and 0.117884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087315Jy  sigma=1.141739
! Fit after  self-cal, rms=0.087335Jy  sigma=1.141086
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.517 x 46.6 at -5.045 degrees (North through East)
! Clean map  min=-0.0044035  max=0.10764 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.00     LA        0.97     NL        1.17     
!   OV        0.94     PT        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.03     LA        0.94     NL        1.26     
!   OV        0.86     PT        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        1.02     LA        0.99     NL        1.04     
!   OV        0.97     PT        1.04     
! 
! 
! Fit before self-cal, rms=0.087335Jy  sigma=1.141086
! Fit after  self-cal, rms=0.090952Jy  sigma=1.131953
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.727 mas, bmaj=46.84 mas, bpa=-4.483 degrees
! Estimated noise=1.03074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000488079 Jy
! Component: 100  -  total flux cleaned = -0.000514344 Jy
! Component: 150  -  total flux cleaned = -0.000414362 Jy
! Component: 200  -  total flux cleaned = -0.000286352 Jy
! Total flux subtracted in 200 components = -0.000286352 Jy
! Clean residual min=-0.003200 max=0.003327 Jy/beam
! Clean residual mean=-0.000035 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.117598 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 113 components and 0.117598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090846Jy  sigma=1.130790
! Fit after  self-cal, rms=0.091103Jy  sigma=1.130149
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091103Jy  sigma=1.130149
! Fit after  self-cal, rms=0.092924Jy  sigma=1.126812
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.732 mas, bmaj=46.65 mas, bpa=-4.771 degrees
! Estimated noise=1.02872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00043895 Jy
! Component: 100  -  total flux cleaned = -0.000308415 Jy
! Component: 150  -  total flux cleaned = -0.000263979 Jy
! Component: 200  -  total flux cleaned = -0.000224439 Jy
! Total flux subtracted in 200 components = -0.000224439 Jy
! Clean residual min=-0.003029 max=0.002702 Jy/beam
! Clean residual mean=-0.000012 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.117373 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 144 components and 0.117373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092900Jy  sigma=1.126686
! Fit after  self-cal, rms=0.092987Jy  sigma=1.126526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.18039e-05 Jy
! Component: 100  -  total flux cleaned = 7.42416e-05 Jy
! Component: 150  -  total flux cleaned = 9.41076e-05 Jy
! Component: 200  -  total flux cleaned = 0.000130903 Jy
! Total flux subtracted in 200 components = 0.000130903 Jy
! Clean residual min=-0.002957 max=0.002751 Jy/beam
! Clean residual mean=-0.000013 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.117504 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 156 components and 0.117504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092974Jy  sigma=1.126425
! Fit after  self-cal, rms=0.092969Jy  sigma=1.126403
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092969Jy  sigma=1.126403
! Fit after  self-cal, rms=0.093440Jy  sigma=1.126165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.734 mas, bmaj=46.61 mas, bpa=-4.904 degrees
! Estimated noise=1.027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000442461 Jy
! Component: 100  -  total flux cleaned = -0.000522888 Jy
! Component: 150  -  total flux cleaned = -0.000503235 Jy
! Component: 200  -  total flux cleaned = -0.000447671 Jy
! Total flux subtracted in 200 components = -0.000447671 Jy
! Clean residual min=-0.002992 max=0.002672 Jy/beam
! Clean residual mean=-0.000008 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.117057 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 189 components and 0.117057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093415Jy  sigma=1.126068
! Fit after  self-cal, rms=0.093428Jy  sigma=1.126037
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.24495e-05 Jy
! Component: 100  -  total flux cleaned = 6.02604e-05 Jy
! Component: 150  -  total flux cleaned = 7.82769e-05 Jy
! Component: 200  -  total flux cleaned = 0.000111456 Jy
! Total flux subtracted in 200 components = 0.000111456 Jy
! Clean residual min=-0.002934 max=0.002652 Jy/beam
! Clean residual mean=-0.000007 rms=0.000848 Jy/beam
! Combined flux in latest and established models = 0.117168 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 224 components and 0.117168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093417Jy  sigma=1.125968
! Fit after  self-cal, rms=0.093412Jy  sigma=1.125954
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093412Jy  sigma=1.125954
! Fit after  self-cal, rms=0.093378Jy  sigma=1.125907
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.01 mas, bmaj=50.61 mas, bpa=-4.13 degrees
! Estimated noise=1.02005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114296 Jy
! Component: 100  -  total flux cleaned = -7.81257e-05 Jy
! Component: 150  -  total flux cleaned = -3.0444e-05 Jy
! Component: 200  -  total flux cleaned = -1.92821e-06 Jy
! Total flux subtracted in 200 components = -1.92821e-06 Jy
! Clean residual min=-0.002702 max=0.002316 Jy/beam
! Clean residual mean=-0.000008 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.117166 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 249 components and 0.117166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093366Jy  sigma=1.125835
! Fit after  self-cal, rms=0.093363Jy  sigma=1.125821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.06216e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110817 Jy
! Component: 150  -  total flux cleaned = 0.000150268 Jy
! Component: 200  -  total flux cleaned = 0.000185867 Jy
! Total flux subtracted in 200 components = 0.000185867 Jy
! Clean residual min=-0.002665 max=0.002304 Jy/beam
! Clean residual mean=-0.000007 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.117352 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 262 components and 0.117352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093356Jy  sigma=1.125778
! Fit after  self-cal, rms=0.093354Jy  sigma=1.125766
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.733 mas, bmaj=46.6 mas, bpa=-5.007 degrees
! Estimated noise=1.02498 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.733 x 46.6 at -5.007 degrees (North through East)
! Clean map  min=-0.0027977  max=0.1063 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.033 mas, bmaj=41.92 mas, bpa=-5.597 degrees
! Estimated noise=1.15336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0821308 Jy
! Component: 100  -  total flux cleaned = 0.101752 Jy
! Component: 150  -  total flux cleaned = 0.109955 Jy
! Component: 200  -  total flux cleaned = 0.113958 Jy
! Total flux subtracted in 200 components = 0.113958 Jy
! Clean residual min=-0.004291 max=0.004046 Jy/beam
! Clean residual mean=-0.000024 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.113958 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.113958 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.733 mas, bmaj=46.6 mas, bpa=-5.007 degrees
! Estimated noise=1.02498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192511 Jy
! Component: 100  -  total flux cleaned = 0.00235044 Jy
! Component: 150  -  total flux cleaned = 0.00276213 Jy
! Component: 200  -  total flux cleaned = 0.00305785 Jy
! Total flux subtracted in 200 components = 0.00305785 Jy
! Clean residual min=-0.003242 max=0.002912 Jy/beam
! Clean residual mean=-0.000007 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.117016 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 109 components and 0.117016 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.01 mas, bmaj=50.61 mas, bpa=-4.13 degrees
! Estimated noise=1.02005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000528678 Jy
! Component: 100  -  total flux cleaned = 0.00064925 Jy
! Component: 150  -  total flux cleaned = 0.000781159 Jy
! Component: 200  -  total flux cleaned = 0.000875585 Jy
! Total flux subtracted in 200 components = 0.000875585 Jy
! Clean residual min=-0.002841 max=0.002292 Jy/beam
! Clean residual mean=-0.000003 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.117891 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.1395e-05 Jy
! Component: 100  -  total flux cleaned = 2.13025e-05 Jy
! Component: 150  -  total flux cleaned = 2.05222e-05 Jy
! Component: 200  -  total flux cleaned = 1.59326e-06 Jy
! Total flux subtracted in 200 components = 1.59326e-06 Jy
! Clean residual min=-0.002807 max=0.002280 Jy/beam
! Clean residual mean=-0.000003 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.117893 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 147 components and 0.117893 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.733 mas, bmaj=46.6 mas, bpa=-5.007 degrees
! Estimated noise=1.02498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184846 Jy
! Component: 100  -  total flux cleaned = -0.000263131 Jy
! Component: 150  -  total flux cleaned = -0.000286428 Jy
! Component: 200  -  total flux cleaned = -0.00028668 Jy
! Total flux subtracted in 200 components = -0.00028668 Jy
! Clean residual min=-0.003029 max=0.002705 Jy/beam
! Clean residual mean=-0.000002 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.117606 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 173 components and 0.117606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093345Jy  sigma=1.125826
! Fit after  self-cal, rms=0.093340Jy  sigma=1.125764
wmodel J0608-3847_S_map.mod
! Writing 173 model components to file: J0608-3847_S_map.mod
wobs   J0608-3847_S_uvs.fits
! Writing UV FITS file: J0608-3847_S_uvs.fits
wwins  J0608-3847_S_map.win
! wwins: Wrote 1 windows to J0608-3847_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.77259e-05 Jy
! Component: 100  -  total flux cleaned = 2.81804e-05 Jy
! Component: 150  -  total flux cleaned = -4.71162e-05 Jy
! Component: 200  -  total flux cleaned = -0.000189143 Jy
! Component: 250  -  total flux cleaned = -0.000256788 Jy
! Component: 300  -  total flux cleaned = -0.000225169 Jy
! Component: 350  -  total flux cleaned = -0.00019449 Jy
! Component: 400  -  total flux cleaned = -7.72676e-05 Jy
! Component: 450  -  total flux cleaned = -4.94736e-05 Jy
! Component: 500  -  total flux cleaned = 3.10846e-05 Jy
! Component: 550  -  total flux cleaned = 0.000108145 Jy
! Component: 600  -  total flux cleaned = 0.00018269 Jy
! Component: 650  -  total flux cleaned = 0.000301591 Jy
! Component: 700  -  total flux cleaned = 0.000324957 Jy
! Component: 750  -  total flux cleaned = 0.000435074 Jy
! Component: 800  -  total flux cleaned = 0.000520724 Jy
! Component: 850  -  total flux cleaned = 0.000603452 Jy
! Component: 900  -  total flux cleaned = 0.000623508 Jy
! Component: 950  -  total flux cleaned = 0.000663205 Jy
! Component: 1000  -  total flux cleaned = 0.00070171 Jy
! Component: 1050  -  total flux cleaned = 0.000758647 Jy
! Component: 1100  -  total flux cleaned = 0.000944354 Jy
! Component: 1150  -  total flux cleaned = 0.001072 Jy
! Component: 1200  -  total flux cleaned = 0.00123311 Jy
! Component: 1250  -  total flux cleaned = 0.00132122 Jy
! Component: 1300  -  total flux cleaned = 0.00144254 Jy
! Component: 1350  -  total flux cleaned = 0.00152809 Jy
! Component: 1400  -  total flux cleaned = 0.00167969 Jy
! Component: 1450  -  total flux cleaned = 0.00181207 Jy
! Component: 1500  -  total flux cleaned = 0.00190978 Jy
! Component: 1550  -  total flux cleaned = 0.00203844 Jy
! Component: 1600  -  total flux cleaned = 0.00213362 Jy
! Component: 1650  -  total flux cleaned = 0.00222754 Jy
! Component: 1700  -  total flux cleaned = 0.0023511 Jy
! Component: 1750  -  total flux cleaned = 0.00245746 Jy
! Component: 1800  -  total flux cleaned = 0.0025326 Jy
! Component: 1850  -  total flux cleaned = 0.00268078 Jy
! Component: 1900  -  total flux cleaned = 0.0027391 Jy
! Component: 1950  -  total flux cleaned = 0.00284021 Jy
! Component: 2000  -  total flux cleaned = 0.0029401 Jy
! Component: 2050  -  total flux cleaned = 0.0030247 Jy
! Component: 2100  -  total flux cleaned = 0.00312213 Jy
! Component: 2150  -  total flux cleaned = 0.00317729 Jy
! Component: 2200  -  total flux cleaned = 0.00327288 Jy
! Component: 2250  -  total flux cleaned = 0.00332684 Jy
! Component: 2300  -  total flux cleaned = 0.00342069 Jy
! Component: 2350  -  total flux cleaned = 0.00351391 Jy
! Component: 2400  -  total flux cleaned = 0.00360644 Jy
! Component: 2450  -  total flux cleaned = 0.00368535 Jy
! Component: 2500  -  total flux cleaned = 0.00377682 Jy
! Component: 2550  -  total flux cleaned = 0.00386774 Jy
! Component: 2600  -  total flux cleaned = 0.00394527 Jy
! Component: 2650  -  total flux cleaned = 0.0040352 Jy
! Component: 2700  -  total flux cleaned = 0.00411178 Jy
! Component: 2750  -  total flux cleaned = 0.0042008 Jy
! Component: 2800  -  total flux cleaned = 0.00427657 Jy
! Component: 2850  -  total flux cleaned = 0.004352 Jy
! Component: 2900  -  total flux cleaned = 0.00438956 Jy
! Component: 2950  -  total flux cleaned = 0.00446454 Jy
! Component: 3000  -  total flux cleaned = 0.00452686 Jy
! Component: 3050  -  total flux cleaned = 0.00458897 Jy
! Component: 3100  -  total flux cleaned = 0.00465095 Jy
! Component: 3150  -  total flux cleaned = 0.00471272 Jy
! Component: 3200  -  total flux cleaned = 0.00476209 Jy
! Component: 3250  -  total flux cleaned = 0.0048236 Jy
! Component: 3300  -  total flux cleaned = 0.00490955 Jy
! Component: 3350  -  total flux cleaned = 0.0049707 Jy
! Component: 3400  -  total flux cleaned = 0.00503183 Jy
! Component: 3450  -  total flux cleaned = 0.00510486 Jy
! Component: 3500  -  total flux cleaned = 0.00516561 Jy
! Component: 3550  -  total flux cleaned = 0.00522631 Jy
! Component: 3600  -  total flux cleaned = 0.00529911 Jy
! Component: 3650  -  total flux cleaned = 0.00535968 Jy
! Component: 3700  -  total flux cleaned = 0.00543212 Jy
! Component: 3750  -  total flux cleaned = 0.0054925 Jy
! Component: 3800  -  total flux cleaned = 0.00555281 Jy
! Component: 3850  -  total flux cleaned = 0.005613 Jy
! Component: 3900  -  total flux cleaned = 0.00567327 Jy
! Component: 3950  -  total flux cleaned = 0.00576973 Jy
! Component: 4000  -  total flux cleaned = 0.00587843 Jy
! Component: 4050  -  total flux cleaned = 0.00598734 Jy
! Total flux subtracted in 4096 components = 0.00609654 Jy
! Clean residual min=-0.000677 max=0.000802 Jy/beam
! Clean residual mean=0.000002 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.123703 Jy
keep
! Adding 515 model components to the UV plane model.
! The established model now contains 688 components and 0.123703 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J0608-3847_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.733 x 46.6 at -5.007 degrees (North through East)
! Clean map  min=-0.0032535  max=0.10598 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J0608-3847_S_map.fits
wmodel /vlbi/uf001/uva//J0608-3847_S_map.mod
! Writing 688 model components to file: /vlbi/uf001/uva//J0608-3847_S_map.mod
wobs   /vlbi/uf001/uva//J0608-3847_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J0608-3847_S_uvs.fits
wwins  /vlbi/uf001/uva//J0608-3847_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J0608-3847_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.105976 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000267467 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.757152 0.757152 1.5143 3.02861 6.05722 12.1144 24.2289 48.4578 96.9155
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.105 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  396.221 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J0608-3847_S_dfm.log closed on Sun Jan 13 22:51:49 2019